thermostat/src/command_handler.rs

446 lines
17 KiB
Rust

use smoltcp::socket::TcpSocket;
use log::{error, warn};
use core::fmt::Write;
use heapless::{consts::U1024, Vec};
use super::{
net,
command_parser::{
Ipv4Config,
Command,
ShowCommand,
CenterPoint,
PidParameter,
PwmPin,
ShParameter
},
ad7172,
CHANNEL_CONFIG_KEY,
channels::{
Channels,
CHANNELS
},
config::ChannelConfig,
dfu,
flash_store::FlashStore,
session::Session,
FanCtrl,
hw_rev::HWRev,
};
use uom::{
si::{
f64::{
ElectricCurrent,
ElectricPotential,
ElectricalResistance,
ThermodynamicTemperature,
},
electric_current::ampere,
electric_potential::volt,
electrical_resistance::ohm,
thermodynamic_temperature::degree_celsius,
},
};
#[derive(Debug, Clone, PartialEq)]
pub enum Handler {
Handled,
CloseSocket,
NewIPV4(Ipv4Config),
Reset,
}
#[derive(Clone, Debug, PartialEq)]
pub enum Error {
ReportError,
PostFilterRateError,
FlashError
}
pub type JsonBuffer = Vec<u8, U1024>;
fn send_line(socket: &mut TcpSocket, data: &[u8]) -> bool {
let send_free = socket.send_capacity() - socket.send_queue();
if data.len() > send_free + 1 {
// Not enough buffer space, skip report for now,
// instead of sending incomplete line
warn!(
"TCP socket has only {}/{} needed {}",
send_free + 1, socket.send_capacity(), data.len(),
);
} else {
match socket.send_slice(&data) {
Ok(sent) if sent == data.len() => {
let _ = socket.send_slice(b"\n");
// success
return true
}
Ok(sent) =>
warn!("sent only {}/{} bytes", sent, data.len()),
Err(e) =>
error!("error sending line: {:?}", e),
}
}
// not success
false
}
impl Handler {
fn reporting(socket: &mut TcpSocket) -> Result<Handler, Error> {
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn show_report_mode(socket: &mut TcpSocket, session: &Session) -> Result<Handler, Error> {
let _ = writeln!(socket, "{{ \"report\": {:?} }}", session.reporting());
Ok(Handler::Handled)
}
fn show_report(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.reports_json() {
Ok(buf) => {
send_line(socket, &buf[..]);
}
Err(e) => {
error!("unable to serialize report: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_pid(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.pid_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize pid summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_pwm(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.pwm_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize pwm summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_steinhart_hart(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.steinhart_hart_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize steinhart-hart summaries: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_post_filter (socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.postfilter_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize postfilter summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_ipv4 (socket: &mut TcpSocket, ipv4_config: &mut Ipv4Config) -> Result<Handler, Error> {
let (cidr, gateway) = net::split_ipv4_config(ipv4_config.clone());
let _ = write!(socket, "{{\"addr\":\"{}\"", cidr);
gateway.map(|gateway| write!(socket, ",\"gateway\":\"{}\"", gateway));
let _ = writeln!(socket, "}}");
Ok(Handler::Handled)
}
fn engage_pid (socket: &mut TcpSocket, channels: &mut Channels, channel: usize) -> Result<Handler, Error> {
channels.channel_state(channel).pid_engaged = true;
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_pwm (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, pin: PwmPin, value: f64) -> Result<Handler, Error> {
match pin {
PwmPin::ISet => {
channels.channel_state(channel).pid_engaged = false;
let current = ElectricCurrent::new::<ampere>(value);
channels.set_i(channel, current);
channels.power_up(channel);
}
PwmPin::MaxV => {
let voltage = ElectricPotential::new::<volt>(value);
channels.set_max_v(channel, voltage);
}
PwmPin::MaxIPos => {
let current = ElectricCurrent::new::<ampere>(value);
channels.set_max_i_pos(channel, current);
}
PwmPin::MaxINeg => {
let current = ElectricCurrent::new::<ampere>(value);
channels.set_max_i_neg(channel, current);
}
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_center_point(socket: &mut TcpSocket, channels: &mut Channels, channel: usize, center: CenterPoint) -> Result<Handler, Error> {
let i_tec = channels.get_i(channel);
let state = channels.channel_state(channel);
state.center = center;
if !state.pid_engaged {
channels.set_i(channel, i_tec);
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_pid (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, parameter: PidParameter, value: f64) -> Result<Handler, Error> {
let pid = &mut channels.channel_state(channel).pid;
use super::command_parser::PidParameter::*;
match parameter {
Target =>
pid.target = value,
KP =>
pid.parameters.kp = value as f32,
KI =>
pid.update_ki(value as f32),
KD =>
pid.parameters.kd = value as f32,
OutputMin =>
pid.parameters.output_min = value as f32,
OutputMax =>
pid.parameters.output_max = value as f32,
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_steinhart_hart (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, parameter: ShParameter, value: f64) -> Result<Handler, Error> {
let sh = &mut channels.channel_state(channel).sh;
use super::command_parser::ShParameter::*;
match parameter {
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
B => sh.b = value,
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn reset_post_filter (socket: &mut TcpSocket, channels: &mut Channels, channel: usize) -> Result<Handler, Error> {
channels.adc.set_postfilter(channel as u8, None).unwrap();
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_post_filter (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, rate: f32) -> Result<Handler, Error> {
let filter = ad7172::PostFilter::closest(rate);
match filter {
Some(filter) => {
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
send_line(socket, b"{}");
}
None => {
error!("unable to choose postfilter for rate {:.3}", rate);
send_line(socket, b"{{\"error\": \"unable to choose postfilter rate\"}}");
return Err(Error::PostFilterRateError);
}
}
Ok(Handler::Handled)
}
fn load_channel (socket: &mut TcpSocket, channels: &mut Channels, store: &mut FlashStore, channel: Option<usize>) -> Result<Handler, Error> {
for c in 0..CHANNELS {
if channel.is_none() || channel == Some(c) {
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
Ok(Some(config)) => {
config.apply(channels, c);
send_line(socket, b"{}");
}
Ok(None) => {
error!("flash config not found");
send_line(socket, b"{{\"error\": \"flash config not found\"}}");
}
Err(e) => {
error!("unable to load config from flash: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::FlashError);
}
}
}
}
Ok(Handler::Handled)
}
fn save_channel (socket: &mut TcpSocket, channels: &mut Channels, channel: Option<usize>, store: &mut FlashStore) -> Result<Handler, Error> {
for c in 0..CHANNELS {
let mut store_value_buf = [0u8; 256];
if channel.is_none() || channel == Some(c) {
let config = ChannelConfig::new(channels, c);
match store.write_value(CHANNEL_CONFIG_KEY[c], &config, &mut store_value_buf) {
Ok(()) => {
send_line(socket, b"{}");
}
Err(e) => {
error!("unable to save channel {} config to flash: {:?}", c, e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::FlashError);
}
}
}
}
Ok(Handler::Handled)
}
fn set_ipv4 (socket: &mut TcpSocket, store: &mut FlashStore, config: Ipv4Config) -> Result<Handler, Error> {
let _ = store
.write_value("ipv4", &config, [0; 16])
.map_err(|e| error!("unable to save ipv4 config to flash: {:?}", e));
let new_ipv4_config = Some(config);
send_line(socket, b"{}");
Ok(Handler::NewIPV4(new_ipv4_config.unwrap()))
}
fn reset (channels: &mut Channels) -> Result<Handler, Error> {
for i in 0..CHANNELS {
channels.power_down(i);
}
// should_reset = true;
Ok(Handler::Reset)
}
fn dfu (channels: &mut Channels) -> Result<Handler, Error> {
for i in 0..CHANNELS {
channels.power_down(i);
}
unsafe {
dfu::set_dfu_trigger();
}
// should_reset = true;
Ok(Handler::Reset)
}
fn set_fan(socket: &mut TcpSocket, fan_pwm: u32, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> {
if !fan_ctrl.fan_available() {
send_line(socket, b"{ \"warning\": \"this thermostat doesn't have fan!\" }");
return Ok(Handler::Handled);
}
fan_ctrl.set_auto_mode(false);
fan_ctrl.set_pwm(fan_pwm);
if fan_ctrl.fan_pwm_recommended() {
send_line(socket, b"{}");
} else {
send_line(socket, b"{ \"warning\": \"this fan doesn't have full PWM support. Use it at your own risk!\" }");
}
Ok(Handler::Handled)
}
fn show_fan(socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> {
match fan_ctrl.summary() {
Ok(buf) => {
send_line(socket, &buf);
Ok(Handler::Handled)
}
Err(e) => {
error!("unable to serialize fan summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
Err(Error::ReportError)
}
}
}
fn fan_auto(socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> {
if !fan_ctrl.fan_available() {
send_line(socket, b"{ \"warning\": \"this thermostat doesn't have fan!\" }");
return Ok(Handler::Handled);
}
fan_ctrl.set_auto_mode(true);
if fan_ctrl.fan_pwm_recommended() {
send_line(socket, b"{}");
} else {
send_line(socket, b"{ \"warning\": \"this fan doesn't have full PWM support. Use it at your own risk!\" }");
}
Ok(Handler::Handled)
}
fn fan_curve(socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl, k_a: f32, k_b: f32, k_c: f32) -> Result<Handler, Error> {
fan_ctrl.set_curve(k_a, k_b, k_c);
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn fan_defaults(socket: &mut TcpSocket, fan_ctrl: &mut FanCtrl) -> Result<Handler, Error> {
fan_ctrl.restore_defaults();
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn show_hwrev(socket: &mut TcpSocket, hwrev: HWRev) -> Result<Handler, Error> {
match hwrev.summary() {
Ok(buf) => {
send_line(socket, &buf);
Ok(Handler::Handled)
}
Err(e) => {
error!("unable to serialize HWRev summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
Err(Error::ReportError)
}
}
}
pub fn handle_command(command: Command, socket: &mut TcpSocket, channels: &mut Channels, session: &Session, store: &mut FlashStore, ipv4_config: &mut Ipv4Config, fan_ctrl: &mut FanCtrl, hwrev: HWRev) -> Result<Self, Error> {
match command {
Command::Quit => Ok(Handler::CloseSocket),
Command::Reporting(_reporting) => Handler::reporting(socket),
Command::Show(ShowCommand::Reporting) => Handler::show_report_mode(socket, session),
Command::Show(ShowCommand::Input) => Handler::show_report(socket, channels),
Command::Show(ShowCommand::Pid) => Handler::show_pid(socket, channels),
Command::Show(ShowCommand::Pwm) => Handler::show_pwm(socket, channels),
Command::Show(ShowCommand::SteinhartHart) => Handler::show_steinhart_hart(socket, channels),
Command::Show(ShowCommand::PostFilter) => Handler::show_post_filter(socket, channels),
Command::Show(ShowCommand::Ipv4) => Handler::show_ipv4(socket, ipv4_config),
Command::PwmPid { channel } => Handler::engage_pid(socket, channels, channel),
Command::Pwm { channel, pin, value } => Handler::set_pwm(socket, channels, channel, pin, value),
Command::CenterPoint { channel, center } => Handler::set_center_point(socket, channels, channel, center),
Command::Pid { channel, parameter, value } => Handler::set_pid(socket, channels, channel, parameter, value),
Command::SteinhartHart { channel, parameter, value } => Handler::set_steinhart_hart(socket, channels, channel, parameter, value),
Command::PostFilter { channel, rate: None } => Handler::reset_post_filter(socket, channels, channel),
Command::PostFilter { channel, rate: Some(rate) } => Handler::set_post_filter(socket, channels, channel, rate),
Command::Load { channel } => Handler::load_channel(socket, channels, store, channel),
Command::Save { channel } => Handler::save_channel(socket, channels, channel, store),
Command::Ipv4(config) => Handler::set_ipv4(socket, store, config),
Command::Reset => Handler::reset(channels),
Command::Dfu => Handler::dfu(channels),
Command::FanSet {fan_pwm} => Handler::set_fan(socket, fan_pwm, fan_ctrl),
Command::ShowFan => Handler::show_fan(socket, fan_ctrl),
Command::FanAuto => Handler::fan_auto(socket, fan_ctrl),
Command::FanCurve { k_a, k_b, k_c } => Handler::fan_curve(socket, fan_ctrl, k_a, k_b, k_c),
Command::FanCurveDefaults => Handler::fan_defaults(socket, fan_ctrl),
Command::ShowHWRev => Handler::show_hwrev(socket, hwrev),
}
}
}