use stm32f4xx_hal::hal; use smoltcp::time::Instant; use uom::si::{ f64::{ElectricCurrent, ElectricPotential, ElectricalResistance}, electric_potential::{millivolt, volt}, electric_current::ampere, electrical_resistance::ohm, ratio::ratio, }; use crate::{ ad5680, ad7172, channel::{Channel, Channel0, Channel1}, channel_state::ChannelState, command_parser::{CenterPoint, PwmPin}, pins, }; pub const CHANNELS: usize = 2; pub const R_SENSE: f64 = 0.05; // TODO: -pub pub struct Channels { channel0: Channel, channel1: Channel, pub adc: ad7172::Adc, /// stm32f4 integrated adc pins_adc: pins::PinsAdc, pub pwm: pins::PwmPins, } impl Channels { pub fn new(pins: pins::Pins) -> Self { let mut adc = ad7172::Adc::new(pins.adc_spi, pins.adc_nss).unwrap(); // Feature not used adc.set_sync_enable(false).unwrap(); // Setup channels and start ADC adc.setup_channel(0, ad7172::Input::Ain0, ad7172::Input::Ain1).unwrap(); let adc_calibration0 = adc.get_calibration(0) .expect("adc_calibration0"); adc.setup_channel(1, ad7172::Input::Ain2, ad7172::Input::Ain3).unwrap(); let adc_calibration1 = adc.get_calibration(1) .expect("adc_calibration1"); adc.start_continuous_conversion().unwrap(); let channel0 = Channel::new(pins.channel0, adc_calibration0); let channel1 = Channel::new(pins.channel1, adc_calibration1); let pins_adc = pins.pins_adc; let pwm = pins.pwm; let mut channels = Channels { channel0, channel1, adc, pins_adc, pwm }; for channel in 0..CHANNELS { channels.channel_state(channel).vref = channels.read_vref(channel); channels.calibrate_dac_value(channel); } channels } pub fn channel_state>(&mut self, channel: I) -> &mut ChannelState { match channel.into() { 0 => &mut self.channel0.state, 1 => &mut self.channel1.state, _ => unreachable!(), } } /// ADC input + PID processing pub fn poll_adc(&mut self, instant: Instant) -> Option { self.adc.data_ready().unwrap().map(|channel| { let data = self.adc.read_data().unwrap(); let state = self.channel_state(channel); state.update(instant, data); match state.update_pid() { Some(pid_output) if state.pid_engaged => { log::info!("PID: {:.3} A", pid_output); // Forward PID output to i_set DAC self.set_i(channel.into(), ElectricCurrent::new::(pid_output)); self.power_up(channel); } None if state.pid_engaged => { self.power_down(channel); } _ => {} } channel }) } /// i_set DAC fn get_dac(&mut self, channel: usize) -> (ElectricPotential, ElectricPotential) { let dac_factor = match channel.into() { 0 => self.channel0.dac_factor, 1 => self.channel1.dac_factor, _ => unreachable!(), }; let voltage = self.channel_state(channel).dac_value; let max = ElectricPotential::new::(ad5680::MAX_VALUE as f64 / dac_factor); (voltage, max) } pub fn get_i(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) { let state = self.channel_state(channel); let center_point = match state.center { CenterPoint::Vref => state.vref, CenterPoint::Override(center_point) => ElectricPotential::new::(center_point.into()), }; let r_sense = ElectricalResistance::new::(R_SENSE); let (voltage, max) = self.get_dac(channel); let i_tec = (voltage - center_point) / (10.0 * r_sense); let max = (max - center_point) / (10.0 * r_sense); (i_tec, max) } /// i_set DAC fn set_dac(&mut self, channel: usize, voltage: ElectricPotential) -> (ElectricPotential, ElectricPotential) { let dac_factor = match channel.into() { 0 => self.channel0.dac_factor, 1 => self.channel1.dac_factor, _ => unreachable!(), }; let value = (voltage.get::() * dac_factor) as u32; let value = match channel { 0 => self.channel0.dac.set(value).unwrap(), 1 => self.channel1.dac.set(value).unwrap(), _ => unreachable!(), }; let voltage = ElectricPotential::new::(value as f64 / dac_factor); self.channel_state(channel).dac_value = voltage; let max = ElectricPotential::new::(ad5680::MAX_VALUE as f64 / dac_factor); (voltage, max) } pub fn set_i(&mut self, channel: usize, i_tec: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) { let state = self.channel_state(channel); let center_point = match state.center { CenterPoint::Vref => state.vref, CenterPoint::Override(center_point) => ElectricPotential::new::(center_point.into()), }; let r_sense = ElectricalResistance::new::(R_SENSE); let voltage = i_tec * 10.0 * r_sense + center_point; let (voltage, max) = self.set_dac(channel, voltage); let i_tec = (voltage - center_point) / (10.0 * r_sense); let max = (max - center_point) / (10.0 * r_sense); (i_tec, max) } pub fn read_dac_feedback(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.dac_feedback_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.dac_feedback_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } pub fn read_dac_feedback_until_stable(&mut self, channel: usize, tolerance: ElectricPotential) -> ElectricPotential { let mut prev = self.read_dac_feedback(channel); loop { let current = self.read_dac_feedback(channel); if (current - prev).abs() < tolerance { return current; } prev = current; } } pub fn read_itec(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.itec_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.itec_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } /// should be 1.5V pub fn read_vref(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.vref_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.vref_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } pub fn read_tec_u_meas(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.tec_u_meas_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.tec_u_meas_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } /// Calibrate the I_SET DAC using the DAC_FB ADC pin. /// /// These loops perform a breadth-first search for the DAC setting /// that will produce a `target_voltage`. pub fn calibrate_dac_value(&mut self, channel: usize) { let target_voltage = ElectricPotential::new::(2.5); let mut start_value = 1; let mut best_error = ElectricPotential::new::(100.0); for step in (0..18).rev() { let mut prev_value = start_value; for value in (start_value..=ad5680::MAX_VALUE).step_by(1 << step) { match channel { 0 => { self.channel0.dac.set(value).unwrap(); } 1 => { self.channel1.dac.set(value).unwrap(); } _ => unreachable!(), } let dac_feedback = self.read_dac_feedback_until_stable(channel, ElectricPotential::new::(0.001)); let error = target_voltage - dac_feedback; if error < ElectricPotential::new::(0.0) { break; } else if error < best_error { best_error = error; start_value = prev_value; let dac_factor = value as f64 / dac_feedback.get::(); match channel { 0 => self.channel0.dac_factor = dac_factor, 1 => self.channel1.dac_factor = dac_factor, _ => unreachable!(), } } prev_value = value; } } // Reset self.set_dac(channel, ElectricPotential::new::(0.0)); } // power up TEC pub fn power_up>(&mut self, channel: I) { match channel.into() { 0 => self.channel0.power_up(), 1 => self.channel1.power_up(), _ => unreachable!(), } } // power down TEC pub fn power_down>(&mut self, channel: I) { match channel.into() { 0 => self.channel0.power_down(), 1 => self.channel1.power_down(), _ => unreachable!(), } } fn get_pwm(&self, channel: usize, pin: PwmPin) -> f64 { fn get>(pin: &P) -> f64 { let duty = pin.get_duty(); let max = pin.get_max_duty(); duty as f64 / (max as f64) } match (channel, pin) { (_, PwmPin::ISet) => panic!("i_set is no pwm pin"), (0, PwmPin::MaxIPos) => get(&self.pwm.max_i_pos0), (0, PwmPin::MaxINeg) => get(&self.pwm.max_i_neg0), (0, PwmPin::MaxV) => get(&self.pwm.max_v0), (1, PwmPin::MaxIPos) => get(&self.pwm.max_i_pos1), (1, PwmPin::MaxINeg) => get(&self.pwm.max_i_neg1), (1, PwmPin::MaxV) => get(&self.pwm.max_v1), _ => unreachable!(), } } pub fn get_max_v(&mut self, channel: usize) -> (ElectricPotential, ElectricPotential) { let vref = self.channel_state(channel).vref; let max = 4.0 * vref; let duty = self.get_pwm(channel, PwmPin::MaxV); (duty * max, max) } pub fn get_max_i_pos(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = self.get_pwm(channel, PwmPin::MaxIPos); (duty * max, max) } pub fn get_max_i_neg(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = self.get_pwm(channel, PwmPin::MaxINeg); (duty * max, max) } fn set_pwm(&mut self, channel: usize, pin: PwmPin, duty: f64) -> f64 { fn set>(pin: &mut P, duty: f64) -> f64 { let max = pin.get_max_duty(); let value = ((duty * (max as f64)) as u16).min(max); pin.set_duty(value); value as f64 / (max as f64) } match (channel, pin) { (_, PwmPin::ISet) => panic!("i_set is no pwm pin"), (0, PwmPin::MaxIPos) => set(&mut self.pwm.max_i_pos0, duty), (0, PwmPin::MaxINeg) => set(&mut self.pwm.max_i_neg0, duty), (0, PwmPin::MaxV) => set(&mut self.pwm.max_v0, duty), (1, PwmPin::MaxIPos) => set(&mut self.pwm.max_i_pos1, duty), (1, PwmPin::MaxINeg) => set(&mut self.pwm.max_i_neg1, duty), (1, PwmPin::MaxV) => set(&mut self.pwm.max_v1, duty), _ => unreachable!(), } } pub fn set_max_v(&mut self, channel: usize, max_v: ElectricPotential) -> (ElectricPotential, ElectricPotential) { let vref = self.channel_state(channel).vref; let max = 4.0 * vref; let duty = (max_v / max).get::(); let duty = self.set_pwm(channel, PwmPin::MaxV, duty); (duty * max, max) } pub fn set_max_i_pos(&mut self, channel: usize, max_i_pos: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = (max_i_pos / max).get::(); let duty = self.set_pwm(channel, PwmPin::MaxIPos, duty); (duty * max, max) } pub fn set_max_i_neg(&mut self, channel: usize, max_i_neg: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = (max_i_neg / max).get::(); let duty = self.set_pwm(channel, PwmPin::MaxINeg, duty); (duty * max, max) } }