use core::cmp::max_by; use heapless::{consts::U2, Vec}; use serde::{Serialize, Serializer}; use smoltcp::time::Instant; use stm32f4xx_hal::hal; use uom::si::{ f64::{ElectricCurrent, ElectricPotential, ElectricalResistance, Time}, electric_potential::{millivolt, volt}, electric_current::ampere, electrical_resistance::ohm, ratio::ratio, thermodynamic_temperature::degree_celsius, }; use crate::{ ad5680, ad7172, channel::{Channel, Channel0, Channel1}, channel_state::ChannelState, command_parser::{CenterPoint, PwmPin}, command_handler::JsonBuffer, pins, steinhart_hart, }; pub const CHANNELS: usize = 2; pub const R_SENSE: f64 = 0.05; // DAC chip outputs 0-5v, which is then passed through a resistor dividor to provide 0-3v range const DAC_OUT_V_MAX: f64 = 3.0; // TODO: -pub pub struct Channels { channel0: Channel, channel1: Channel, pub adc: ad7172::Adc, /// stm32f4 integrated adc pins_adc: pins::PinsAdc, pub pwm: pins::PwmPins, } impl Channels { pub fn new(pins: pins::Pins) -> Self { let mut adc = ad7172::Adc::new(pins.adc_spi, pins.adc_nss).unwrap(); // Feature not used adc.set_sync_enable(false).unwrap(); // Setup channels and start ADC adc.setup_channel(0, ad7172::Input::Ain2, ad7172::Input::Ain3).unwrap(); let adc_calibration0 = adc.get_calibration(0) .expect("adc_calibration0"); adc.setup_channel(1, ad7172::Input::Ain0, ad7172::Input::Ain1).unwrap(); let adc_calibration1 = adc.get_calibration(1) .expect("adc_calibration1"); adc.start_continuous_conversion().unwrap(); let channel0 = Channel::new(pins.channel0, adc_calibration0); let channel1 = Channel::new(pins.channel1, adc_calibration1); let pins_adc = pins.pins_adc; let pwm = pins.pwm; let mut channels = Channels { channel0, channel1, adc, pins_adc, pwm }; for channel in 0..CHANNELS { channels.calibrate_dac_value(channel); channels.set_i(channel, ElectricCurrent::new::(0.0)); } channels } pub fn channel_state>(&mut self, channel: I) -> &mut ChannelState { match channel.into() { 0 => &mut self.channel0.state, 1 => &mut self.channel1.state, _ => unreachable!(), } } /// ADC input + PID processing pub fn poll_adc(&mut self, instant: Instant) -> Option { self.adc.data_ready().unwrap().map(|channel| { let data = self.adc.read_data().unwrap(); let state = self.channel_state(channel); state.update(instant, data); match state.update_pid() { Some(pid_output) if state.pid_engaged => { // Forward PID output to i_set DAC self.set_i(channel.into(), ElectricCurrent::new::(pid_output)); self.power_up(channel); } None if state.pid_engaged => { self.power_down(channel); } _ => {} } channel }) } /// calculate the TEC i_set centerpoint pub fn get_center(&mut self, channel: usize) -> ElectricPotential { match self.channel_state(channel).center { CenterPoint::Vref => self.read_vref(channel), CenterPoint::Override(center_point) => ElectricPotential::new::(center_point.into()), } } /// i_set DAC fn get_dac(&mut self, channel: usize) -> ElectricPotential { let voltage = self.channel_state(channel).dac_value; voltage } pub fn get_i(&mut self, channel: usize) -> ElectricCurrent { let center_point = self.get_center(channel); let r_sense = ElectricalResistance::new::(R_SENSE); let voltage = self.get_dac(channel); let i_tec = (voltage - center_point) / (10.0 * r_sense); i_tec } /// i_set DAC fn set_dac(&mut self, channel: usize, voltage: ElectricPotential) -> ElectricPotential { let value = ((voltage / ElectricPotential::new::(DAC_OUT_V_MAX)).get::() * (ad5680::MAX_VALUE as f64)) as u32 ; match channel { 0 => self.channel0.dac.set(value).unwrap(), 1 => self.channel1.dac.set(value).unwrap(), _ => unreachable!(), }; self.channel_state(channel).dac_value = voltage; voltage } pub fn set_i(&mut self, channel: usize, i_tec: ElectricCurrent) -> ElectricCurrent { let vref_meas = match channel.into() { 0 => self.channel0.vref_meas, 1 => self.channel1.vref_meas, _ => unreachable!(), }; let center_point = vref_meas; let r_sense = ElectricalResistance::new::(R_SENSE); let voltage = i_tec * 10.0 * r_sense + center_point; let voltage = self.set_dac(channel, voltage); let i_tec = (voltage - center_point) / (10.0 * r_sense); i_tec } pub fn read_dac_feedback(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.dac_feedback_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.dac_feedback_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } pub fn read_dac_feedback_until_stable(&mut self, channel: usize, tolerance: ElectricPotential) -> ElectricPotential { let mut prev = self.read_dac_feedback(channel); loop { let current = self.read_dac_feedback(channel); if (current - prev).abs() < tolerance { return current; } prev = current; } } pub fn read_itec(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.itec_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.itec_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } /// should be 1.5V pub fn read_vref(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.vref_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.vref_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } pub fn read_tec_u_meas(&mut self, channel: usize) -> ElectricPotential { match channel { 0 => { let sample = self.pins_adc.convert( &self.channel0.tec_u_meas_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } 1 => { let sample = self.pins_adc.convert( &self.channel1.tec_u_meas_pin, stm32f4xx_hal::adc::config::SampleTime::Cycles_480 ); let mv = self.pins_adc.sample_to_millivolts(sample); ElectricPotential::new::(mv as f64) } _ => unreachable!(), } } /// Calibrates the DAC output to match vref of the MAX driver to reduce zero-current offset of the MAX driver output. /// /// The thermostat DAC applies a control voltage signal to the CTLI pin of MAX driver chip to control its output current. /// The CTLI input signal is centered around VREF of the MAX chip. Applying VREF to CTLI sets the output current to 0. /// /// This calibration routine measures the VREF voltage and the DAC output with the STM32 ADC, and uses a breadth-first /// search to find the DAC setting that will produce a DAC output voltage closest to VREF. This DAC output voltage will /// be stored and used in subsequent i_set routines to bias the current control signal to the measured VREF, reducing /// the offset error of the current control signal. /// /// The input offset of the STM32 ADC is eliminated by using the same ADC for the measurements, and by only using the /// difference in VREF and DAC output for the calibration. /// /// This routine should be called only once after boot, repeated reading of the vref signal and changing of the stored /// VREF measurement can introduce significant noise at the current output, degrading the stabilily performance of the /// thermostat. pub fn calibrate_dac_value(&mut self, channel: usize) { let samples = 50; let mut target_voltage = ElectricPotential::new::(0.0); for _ in 0..samples { target_voltage = target_voltage + self.get_center(channel); } target_voltage = target_voltage / samples as f64; let mut start_value = 1; let mut best_error = ElectricPotential::new::(100.0); for step in (0..18).rev() { let mut prev_value = start_value; for value in (start_value..=ad5680::MAX_VALUE).step_by(1 << step) { match channel { 0 => { self.channel0.dac.set(value).unwrap(); } 1 => { self.channel1.dac.set(value).unwrap(); } _ => unreachable!(), } let dac_feedback = self.read_dac_feedback_until_stable(channel, ElectricPotential::new::(0.001)); let error = target_voltage - dac_feedback; if error < ElectricPotential::new::(0.0) { break; } else if error < best_error { best_error = error; start_value = prev_value; let vref = (value as f64 / ad5680::MAX_VALUE as f64) * ElectricPotential::new::(DAC_OUT_V_MAX); match channel { 0 => self.channel0.vref_meas = vref, 1 => self.channel1.vref_meas = vref, _ => unreachable!(), } } prev_value = value; } } // Reset self.set_dac(channel, ElectricPotential::new::(0.0)); } // power up TEC pub fn power_up>(&mut self, channel: I) { match channel.into() { 0 => self.channel0.power_up(), 1 => self.channel1.power_up(), _ => unreachable!(), } } // power down TEC pub fn power_down>(&mut self, channel: I) { match channel.into() { 0 => self.channel0.power_down(), 1 => self.channel1.power_down(), _ => unreachable!(), } } fn get_pwm(&self, channel: usize, pin: PwmPin) -> f64 { fn get>(pin: &P) -> f64 { let duty = pin.get_duty(); let max = pin.get_max_duty(); duty as f64 / (max as f64) } match (channel, pin) { (_, PwmPin::ISet) => panic!("i_set is no pwm pin"), (0, PwmPin::MaxIPos) => get(&self.pwm.max_i_pos0), (0, PwmPin::MaxINeg) => get(&self.pwm.max_i_neg0), (0, PwmPin::MaxV) => get(&self.pwm.max_v0), (1, PwmPin::MaxIPos) => get(&self.pwm.max_i_pos1), (1, PwmPin::MaxINeg) => get(&self.pwm.max_i_neg1), (1, PwmPin::MaxV) => get(&self.pwm.max_v1), _ => unreachable!(), } } pub fn get_max_v(&mut self, channel: usize) -> ElectricPotential { let max = 4.0 * ElectricPotential::new::(3.3); let duty = self.get_pwm(channel, PwmPin::MaxV); duty * max } pub fn get_max_i_pos(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = self.get_pwm(channel, PwmPin::MaxIPos); (duty * max, max) } pub fn get_max_i_neg(&mut self, channel: usize) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = self.get_pwm(channel, PwmPin::MaxINeg); (duty * max, max) } // Get current passing through TEC pub fn get_tec_i(&mut self, channel: usize) -> ElectricCurrent { (self.read_itec(channel) - self.read_vref(channel)) / ElectricalResistance::new::(0.4) } // Get voltage across TEC pub fn get_tec_v(&mut self, channel: usize) -> ElectricPotential { (self.read_tec_u_meas(channel) - ElectricPotential::new::(1.5)) * 4.0 } fn set_pwm(&mut self, channel: usize, pin: PwmPin, duty: f64) -> f64 { fn set>(pin: &mut P, duty: f64) -> f64 { let max = pin.get_max_duty(); let value = ((duty * (max as f64)) as u16).min(max); pin.set_duty(value); value as f64 / (max as f64) } match (channel, pin) { (_, PwmPin::ISet) => panic!("i_set is no pwm pin"), (0, PwmPin::MaxIPos) => set(&mut self.pwm.max_i_pos0, duty), (0, PwmPin::MaxINeg) => set(&mut self.pwm.max_i_neg0, duty), (0, PwmPin::MaxV) => set(&mut self.pwm.max_v0, duty), (1, PwmPin::MaxIPos) => set(&mut self.pwm.max_i_pos1, duty), (1, PwmPin::MaxINeg) => set(&mut self.pwm.max_i_neg1, duty), (1, PwmPin::MaxV) => set(&mut self.pwm.max_v1, duty), _ => unreachable!(), } } pub fn set_max_v(&mut self, channel: usize, max_v: ElectricPotential) -> (ElectricPotential, ElectricPotential) { let max = 4.0 * ElectricPotential::new::(3.3); let duty = (max_v / max).get::(); let duty = self.set_pwm(channel, PwmPin::MaxV, duty); (duty * max, max) } pub fn set_max_i_pos(&mut self, channel: usize, max_i_pos: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = (max_i_pos / max).get::(); let duty = self.set_pwm(channel, PwmPin::MaxIPos, duty); (duty * max, max) } pub fn set_max_i_neg(&mut self, channel: usize, max_i_neg: ElectricCurrent) -> (ElectricCurrent, ElectricCurrent) { let max = ElectricCurrent::new::(3.0); let duty = (max_i_neg / max).get::(); let duty = self.set_pwm(channel, PwmPin::MaxINeg, duty); (duty * max, max) } fn report(&mut self, channel: usize) -> Report { let i_set = self.get_i(channel); let i_tec = self.read_itec(channel); let tec_i = self.get_tec_i(channel); let dac_value = self.get_dac(channel); let state = self.channel_state(channel); let pid_output = ElectricCurrent::new::(state.pid.y1); Report { channel, time: state.get_adc_time(), interval: state.get_adc_interval(), adc: state.get_adc(), sens: state.get_sens(), temperature: state.get_temperature() .map(|temperature| temperature.get::()), pid_engaged: state.pid_engaged, i_set, dac_value, dac_feedback: self.read_dac_feedback(channel), i_tec, tec_i, tec_u_meas: self.get_tec_v(channel), pid_output, } } pub fn reports_json(&mut self) -> Result { let mut reports = Vec::<_, U2>::new(); for channel in 0..CHANNELS { let _ = reports.push(self.report(channel)); } serde_json_core::to_vec(&reports) } pub fn pid_summaries_json(&mut self) -> Result { let mut summaries = Vec::<_, U2>::new(); for channel in 0..CHANNELS { let _ = summaries.push(self.channel_state(channel).pid.summary(channel)); } serde_json_core::to_vec(&summaries) } pub fn pid_engaged(&mut self) -> bool { for channel in 0..CHANNELS { if self.channel_state(channel).pid_engaged { return true; } } false } fn pwm_summary(&mut self, channel: usize) -> PwmSummary { PwmSummary { channel, center: CenterPointJson(self.channel_state(channel).center.clone()), i_set: (self.get_i(channel), ElectricCurrent::new::(3.0)).into(), max_v: (self.get_max_v(channel), ElectricPotential::new::(5.0)).into(), max_i_pos: self.get_max_i_pos(channel).into(), max_i_neg: self.get_max_i_neg(channel).into(), } } pub fn pwm_summaries_json(&mut self) -> Result { let mut summaries = Vec::<_, U2>::new(); for channel in 0..CHANNELS { let _ = summaries.push(self.pwm_summary(channel)); } serde_json_core::to_vec(&summaries) } fn postfilter_summary(&mut self, channel: usize) -> PostFilterSummary { let rate = self.adc.get_postfilter(channel as u8).unwrap() .and_then(|filter| filter.output_rate()); PostFilterSummary { channel, rate } } pub fn postfilter_summaries_json(&mut self) -> Result { let mut summaries = Vec::<_, U2>::new(); for channel in 0..CHANNELS { let _ = summaries.push(self.postfilter_summary(channel)); } serde_json_core::to_vec(&summaries) } fn steinhart_hart_summary(&mut self, channel: usize) -> SteinhartHartSummary { let params = self.channel_state(channel).sh.clone(); SteinhartHartSummary { channel, params } } pub fn steinhart_hart_summaries_json(&mut self) -> Result { let mut summaries = Vec::<_, U2>::new(); for channel in 0..CHANNELS { let _ = summaries.push(self.steinhart_hart_summary(channel)); } serde_json_core::to_vec(&summaries) } pub fn current_abs_max_tec_i(&mut self) -> ElectricCurrent { max_by(self.get_tec_i(0).abs(), self.get_tec_i(1).abs(), |a, b| a.partial_cmp(b).unwrap_or(core::cmp::Ordering::Equal)) } } #[derive(Serialize)] pub struct Report { channel: usize, time: Time, interval: Time, adc: Option, sens: Option, temperature: Option, pid_engaged: bool, i_set: ElectricCurrent, dac_value: ElectricPotential, dac_feedback: ElectricPotential, i_tec: ElectricPotential, tec_i: ElectricCurrent, tec_u_meas: ElectricPotential, pid_output: ElectricCurrent, } pub struct CenterPointJson(CenterPoint); // used in JSON encoding, not for config impl Serialize for CenterPointJson { fn serialize(&self, serializer: S) -> Result where S: Serializer, { match self.0 { CenterPoint::Vref => serializer.serialize_str("vref"), CenterPoint::Override(vref) => serializer.serialize_f32(vref), } } } #[derive(Serialize)] pub struct PwmSummaryField { value: T, max: T, } impl From<(T, T)> for PwmSummaryField { fn from((value, max): (T, T)) -> Self { PwmSummaryField { value, max } } } #[derive(Serialize)] pub struct PwmSummary { channel: usize, center: CenterPointJson, i_set: PwmSummaryField, max_v: PwmSummaryField, max_i_pos: PwmSummaryField, max_i_neg: PwmSummaryField, } #[derive(Serialize)] pub struct PostFilterSummary { channel: usize, rate: Option, } #[derive(Serialize)] pub struct SteinhartHartSummary { channel: usize, params: steinhart_hart::Parameters, }