Use arm-none-eabi-objcopy instead of llvm-objcopy #95

Closed
atse wants to merge 1 commits from atse:workaround-llvm-bug into master
2 changed files with 5 additions and 4 deletions

View File

@ -45,7 +45,7 @@ There are several options for flashing Thermostat. DFU requires only a micro-USB
### dfu-util on Linux ### dfu-util on Linux
* Install the DFU USB tool (dfu-util). * Install the DFU USB tool (dfu-util).
* Convert firmware from ELF to BIN: `arm-none-eabi-objcopy -O binary thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra) * Convert firmware from ELF to BIN: `arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra)
* Connect to the Micro USB connector to Thermostat below the RJ45. * Connect to the Micro USB connector to Thermostat below the RJ45.
* Add jumper to Thermostat v2.0 across 2-pin jumper adjacent to JTAG connector. * Add jumper to Thermostat v2.0 across 2-pin jumper adjacent to JTAG connector.
* Cycle board power to put it in DFU update mode * Cycle board power to put it in DFU update mode

View File

@ -39,7 +39,7 @@
}; };
}; };
nativeBuildInputs = [ pkgs.llvm ]; nativeBuildInputs = [ pkgs.gcc-arm-embedded ];
buildPhase = '' buildPhase = ''
cargo build --release --bin thermostat cargo build --release --bin thermostat
@ -49,7 +49,7 @@
mkdir -p $out $out/nix-support mkdir -p $out $out/nix-support
cp target/thumbv7em-none-eabihf/release/thermostat $out/thermostat.elf cp target/thumbv7em-none-eabihf/release/thermostat $out/thermostat.elf
echo file binary-dist $out/thermostat.elf >> $out/nix-support/hydra-build-products echo file binary-dist $out/thermostat.elf >> $out/nix-support/hydra-build-products
llvm-objcopy -O binary target/thumbv7em-none-eabihf/release/thermostat $out/thermostat.bin arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/thermostat $out/thermostat.bin
echo file binary-dist $out/thermostat.bin >> $out/nix-support/hydra-build-products echo file binary-dist $out/thermostat.bin >> $out/nix-support/hydra-build-products
''; '';
@ -67,7 +67,8 @@
devShell.x86_64-linux = pkgs.mkShell { devShell.x86_64-linux = pkgs.mkShell {
name = "thermostat-dev-shell"; name = "thermostat-dev-shell";
buildInputs = with pkgs; [ buildInputs = with pkgs; [
rust openocd dfu-util rust gcc-arm-embedded
openocd dfu-util
] ++ (with python3Packages; [ ] ++ (with python3Packages; [
numpy matplotlib numpy matplotlib
]); ]);