M-Labs/thermostat
9
0
Fork 5
Code Issues 9 Pull Requests 5 Releases Wiki Activity

README: Avoid deprecated OpenOCD ST-Link config #93

Merged
sb10q merged 1 commits from atse/thermostat:dedeprecate-stlink-config into master 2024-01-05 12:15:28 +08:00
Conversation 0 Commits 1 Files Changed 1 +2 -2
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -29,7 +29,7 @@ Alternatively, you can install the Rust toolchain without Nix using rustup; see
Connect SWDIO/SWCLK/RST/GND to a programmer such as ST-Link v2.1. Run OpenOCD: Connect SWDIO/SWCLK/RST/GND to a programmer such as ST-Link v2.1. Run OpenOCD:
```shell ```shell
openocd -f interface/stlink-v2-1.cfg -f target/stm32f4x.cfg openocd -f interface/stlink.cfg -f target/stm32f4x.cfg
``` ```
You may need to power up the programmer before powering the device. You may need to power up the programmer before powering the device.
@ -64,7 +64,7 @@ On a Windows machine install [st.com](https://st.com) DfuSe USB device firmware
### OpenOCD ### OpenOCD
```shell ```shell
openocd -f interface/stlink-v2-1.cfg -f target/stm32f4x.cfg -c "program target/thumbv7em-none-eabihf/release/thermostat verify reset;exit" openocd -f interface/stlink.cfg -f target/stm32f4x.cfg -c "program target/thumbv7em-none-eabihf/release/thermostat verify reset;exit"
``` ```
## Network ## Network