M-Labs
/
thermostat
9
0
Fork 5
Code Issues 10 Pull Requests 7 Releases Wiki Activity

Rename all Steinhart-Hart references to B-param #88

Merged
sb10q merged 1 commits from atse/thermostat:b-parameter into master 2024-10-21 15:48:45 +08:00
Conversation 0 Commits 1 Files Changed 10 +74 -79
10 changed files with 74 additions and 79 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
README.md
View File

@ -111,8 +111,8 @@ formatted as line-delimited JSON.
| `pid <0/1> kd <value>` | Set differential gain |
| `pid <0/1> output_min <amp>` | Set mininum output |
| `pid <0/1> output_max <amp>` | Set maximum output |
| `s-h` | Show Steinhart-Hart equation parameters |
| `s-h <0/1> <t0/b/r0> <value>` | Set Steinhart-Hart parameter for a channel |
| `b-p` | Show B-Parameter equation parameters |
| `b-p <0/1> <t0/b/r0> <value>` | Set B-Parameter for a channel |
| `postfilter` | Show postfilter settings |
| `postfilter <0/1> off` | Disable postfilter |
| `postfilter <0/1> rate <rate>` | Set postfilter output data rate |
@ -144,22 +144,22 @@ output will be truncated when USB buffers are full.
Connect the thermistor with the SENS pins of the
device. Temperature-depending resistance is measured by the AD7172
ADC. To prepare conversion to a temperature, set the Beta parameters
for the Steinhart-Hart equation.
ADC. To prepare conversion to a temperature, set the parameters
for the B-Parameter equation.
Set the base temperature in degrees celsius for the channel 0 thermistor:
```
s-h 0 t0 20
b-p 0 t0 20
```
Set the resistance in Ohms measured at the base temperature t0:
```
s-h 0 r0 10000
b-p 0 r0 10000
```
Set the Beta parameter:
```
s-h 0 b 3800
b-p 0 b 3800
```
### 50/60 Hz filtering
@ -260,7 +260,7 @@ with the following keys.
| `interval` | Seconds | Time elapsed since last report update on channel |
| `adc` | Volts | AD7172 input |
| `sens` | Ohms | Thermistor resistance derived from `adc` |
| `temperature` | Degrees Celsius | Steinhart-Hart conversion result derived from `sens` |
| `temperature` | Degrees Celsius | B-Parameter conversion result derived from `sens` |
| `pid_engaged` | Boolean | `true` if in closed-loop mode |
| `i_set` | Amperes | TEC output current |
| `dac_value` | Volts | AD5680 output derived from `i_set` |

4
pytec/example.py
View File

@ -1,11 +1,11 @@
from pytec.client import Client
tec = Client() #(host="localhost", port=6667)
tec.set_param("s-h", 1, "t0", 20)
tec.set_param("b-p", 1, "t0", 20)
print(tec.get_output())
print(tec.get_pid())
print(tec.get_output())
print(tec.get_postfilter())
print(tec.get_steinhart_hart())
print(tec.get_b_parameter())
for data in tec.report_mode():
print(data)

8
pytec/pytec/client.py
View File

@ -92,14 +92,14 @@ class Client:
"""
return self._get_conf("pid")
def get_steinhart_hart(self):
"""Retrieve Steinhart-Hart parameters for resistance to temperature conversion
def get_b_parameter(self):
"""Retrieve B-Parameter equation parameters for resistance to temperature conversion
Example::
[{'params': {'b': 3800.0, 'r0': 10000.0, 't0': 298.15}, 'channel': 0},
{'params': {'b': 3800.0, 'r0': 10000.0, 't0': 298.15}, 'channel': 1}]
"""
return self._get_conf("s-h")
return self._get_conf("b-p")
def get_postfilter(self):
"""Retrieve DAC postfilter configuration
@ -146,7 +146,7 @@ class Client:
Examples::
tec.set_param("output", 0, "max_v", 2.0)
tec.set_param("pid", 1, "output_max", 2.5)
tec.set_param("s-h", 0, "t0", 20.0)
tec.set_param("b-p", 0, "t0", 20.0)
tec.set_param("center", 0, "vref")
tec.set_param("postfilter", 1, 21)

6
src/steinhart_hart.rs → src/b_parameter.rs
View File

@ -8,14 +8,14 @@ use uom::si::{
thermodynamic_temperature::{degree_celsius, kelvin},
};
/// Steinhart-Hart equation parameters
/// B-Parameter equation parameters
#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]
pub struct Parameters {
/// Base temperature
pub t0: ThermodynamicTemperature,
/// Resistance at base temperature
/// Thermistor resistance at base temperature
pub r0: ElectricalResistance,
/// Beta
/// Beta (average slope of the function ln R vs. 1/T)
pub b: TemperatureInterval,
}

10
src/channel_state.rs
View File

@ -1,8 +1,8 @@
use crate::{
ad7172,
ad7172, b_parameter as bp,
command_parser::{CenterPoint, Polarity},
config::PwmLimits,
pid, steinhart_hart as sh,
pid,
};
use num_traits::Zero;
use smoltcp::time::{Duration, Instant};
@ -32,7 +32,7 @@ pub struct ChannelState {
pub pwm_limits: PwmLimits,
pub pid_engaged: bool,
pub pid: pid::Controller,
pub sh: sh::Parameters,
pub bp: bp::Parameters,
pub polarity: Polarity,
}
@ -54,7 +54,7 @@ impl ChannelState {
},
pid_engaged: false,
pid: pid::Controller::new(pid::Parameters::default()),
sh: sh::Parameters::default(),
bp: bp::Parameters::default(),
polarity: Polarity::Normal,
}
}
@ -100,7 +100,7 @@ impl ChannelState {
pub fn get_temperature(&self) -> Option<ThermodynamicTemperature> {
let r = self.get_sens()?;
let temperature = self.sh.get_temperature(r);
let temperature = self.bp.get_temperature(r);
Some(temperature)
}
}

17
src/channels.rs
View File

@ -1,12 +1,11 @@
use crate::timer::sleep;
use crate::{
ad5680, ad7172,
ad5680, ad7172, b_parameter,
channel::{Channel, Channel0, Channel1},
channel_state::ChannelState,
command_handler::JsonBuffer,
command_parser::{CenterPoint, Polarity, PwmPin},
pins::{self, Channel0VRef, Channel1VRef},
steinhart_hart,
};
use core::marker::PhantomData;
use heapless::{consts::U2, Vec};
@ -558,17 +557,17 @@ impl Channels {
serde_json_core::to_vec(&summaries)
}
fn steinhart_hart_summary(&mut self, channel: usize) -> SteinhartHartSummary {
let params = self.channel_state(channel).sh.clone();
SteinhartHartSummary { channel, params }
fn b_parameter_summary(&mut self, channel: usize) -> BParameterSummary {
let params = self.channel_state(channel).bp.clone();
BParameterSummary { channel, params }
}
pub fn steinhart_hart_summaries_json(
pub fn b_parameter_summaries_json(
&mut self,
) -> Result<JsonBuffer, serde_json_core::ser::Error> {
let mut summaries = Vec::<_, U2>::new();
for channel in 0..CHANNELS {
let _ = summaries.push(self.steinhart_hart_summary(channel));
let _ = summaries.push(self.b_parameter_summary(channel));
}
serde_json_core::to_vec(&summaries)
}
@ -647,7 +646,7 @@ pub struct PostFilterSummary {
}
#[derive(Serialize)]
pub struct SteinhartHartSummary {
pub struct BParameterSummary {
channel: usize,
params: steinhart_hart::Parameters,
params: b_parameter::Parameters,
}

33
src/command_handler.rs
View File

@ -2,7 +2,7 @@ use super::{
ad7172,
channels::{Channels, CHANNELS},
command_parser::{
CenterPoint, Command, Ipv4Config, PidParameter, Polarity, PwmPin, ShParameter, ShowCommand,
BpParameter, CenterPoint, Command, Ipv4Config, PidParameter, Polarity, PwmPin, ShowCommand,
},
config::ChannelConfig,
dfu,
@ -113,16 +113,13 @@ impl Handler {
Ok(Handler::Handled)
}
fn show_steinhart_hart(
socket: &mut TcpSocket,
channels: &mut Channels,
) -> Result<Handler, Error> {
match channels.steinhart_hart_summaries_json() {
fn show_b_parameter(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.b_parameter_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize steinhart-hart summaries: {:?}", e);
error!("unable to serialize b parameter summaries: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::Report);
}
@ -241,19 +238,19 @@ impl Handler {
Ok(Handler::Handled)
}
fn set_steinhart_hart(
fn set_b_parameter(
socket: &mut TcpSocket,
channels: &mut Channels,
channel: usize,
parameter: ShParameter,
parameter: BpParameter,
value: f64,
) -> Result<Handler, Error> {
let sh = &mut channels.channel_state(channel).sh;
use super::command_parser::ShParameter::*;
let bp = &mut channels.channel_state(channel).bp;
use super::command_parser::BpParameter::*;
match parameter {
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
B => sh.b = TemperatureInterval::new::<kelvin>(value),
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
T0 => bp.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
B => bp.b = TemperatureInterval::new::<kelvin>(value),
R0 => bp.r0 = ElectricalResistance::new::<ohm>(value),
}
send_line(socket, b"{}");
Ok(Handler::Handled)
@ -480,9 +477,7 @@ impl Handler {
Command::Show(ShowCommand::Input) => Handler::show_report(socket, channels),
Command::Show(ShowCommand::Pid) => Handler::show_pid(socket, channels),
Command::Show(ShowCommand::Output) => Handler::show_pwm(socket, channels),
Command::Show(ShowCommand::SteinhartHart) => {
Handler::show_steinhart_hart(socket, channels)
}
Command::Show(ShowCommand::BParameter) => Handler::show_b_parameter(socket, channels),
Command::Show(ShowCommand::PostFilter) => Handler::show_post_filter(socket, channels),
Command::Show(ShowCommand::Ipv4) => Handler::show_ipv4(socket, ipv4_config),
Command::OutputPid { channel } => Handler::engage_pid(socket, channels, channel),
@ -502,11 +497,11 @@ impl Handler {
parameter,
value,
} => Handler::set_pid(socket, channels, channel, parameter, value),
Command::SteinhartHart {
Command::BParameter {
channel,
parameter,
value,
} => Handler::set_steinhart_hart(socket, channels, channel, parameter, value),
} => Handler::set_b_parameter(socket, channels, channel, parameter, value),
Command::PostFilter {
channel,
rate: None,

48
src/command_parser.rs
View File

@ -93,7 +93,7 @@ pub enum ShowCommand {
Input,
Output,
Pid,
SteinhartHart,
BParameter,
PostFilter,
Ipv4,
}
@ -108,9 +108,9 @@ pub enum PidParameter {
OutputMax,
}
/// Steinhart-Hart equation parameter
/// B-Parameter equation parameter
#[derive(Debug, Clone, PartialEq)]
pub enum ShParameter {
pub enum BpParameter {
T0,
B,
R0,
@ -172,9 +172,9 @@ pub enum Command {
parameter: PidParameter,
value: f64,
},
SteinhartHart {
BParameter {
channel: usize,
parameter: ShParameter,
parameter: BpParameter,
value: f64,
},
PostFilter {
@ -366,18 +366,18 @@ fn pid(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
))(input)
}
/// `s-h <0-1> <parameter> <value>`
fn steinhart_hart_parameter(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
/// `b-p <0-1> <parameter> <value>`
fn b_parameter_parameter(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
let (input, channel) = channel(input)?;
let (input, _) = whitespace(input)?;
let (input, parameter) = alt((
value(ShParameter::T0, tag("t0")),
value(ShParameter::B, tag("b")),
value(ShParameter::R0, tag("r0")),
value(BpParameter::T0, tag("t0")),
value(BpParameter::B, tag("b")),
value(BpParameter::R0, tag("r0")),
))(input)?;
let (input, _) = whitespace(input)?;
let (input, value) = float(input)?;
let result = value.map(|value| Command::SteinhartHart {
let result = value.map(|value| Command::BParameter {
channel,
parameter,
value,
@ -385,12 +385,12 @@ fn steinhart_hart_parameter(input: &[u8]) -> IResult<&[u8], Result<Command, Erro
Ok((input, result))
}
/// `s-h` | `s-h <steinhart_hart_parameter>`
fn steinhart_hart(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
let (input, _) = tag("s-h")(input)?;
/// `b-p` | `b-p <b_parameter_parameter>`
fn b_parameter(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
let (input, _) = tag("b-p")(input)?;
alt((
preceded(whitespace, steinhart_hart_parameter),
value(Ok(Command::Show(ShowCommand::SteinhartHart)), end),
preceded(whitespace, b_parameter_parameter),
value(Ok(Command::Show(ShowCommand::BParameter)), end),
))(input)
}
@ -572,7 +572,7 @@ fn command(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
output,
center_point,
pid,
steinhart_hart,
b_parameter,
postfilter,
value(Ok(Command::Dfu), tag("dfu")),
fan,
@ -753,19 +753,19 @@ mod test {
}
#[test]
fn parse_steinhart_hart() {
let command = Command::parse(b"s-h");
assert_eq!(command, Ok(Command::Show(ShowCommand::SteinhartHart)));
fn parse_b_parameter() {
let command = Command::parse(b"b-p");
assert_eq!(command, Ok(Command::Show(ShowCommand::BParameter)));
}
#[test]
fn parse_steinhart_hart_set() {
let command = Command::parse(b"s-h 1 t0 23.05");
fn parse_b_parameter_set() {
let command = Command::parse(b"b-p 1 t0 23.05");
assert_eq!(
command,
Ok(Command::SteinhartHart {
Ok(Command::BParameter {
channel: 1,
parameter: ShParameter::T0,
parameter: BpParameter::T0,
value: 23.05,
})
);

9
src/config.rs
View File

@ -1,8 +1,9 @@
use crate::{
ad7172::PostFilter,
b_parameter,
channels::Channels,
command_parser::{CenterPoint, Polarity},
pid, steinhart_hart,
pid,
};
use num_traits::Zero;
use serde::{Deserialize, Serialize};
@ -16,7 +17,7 @@ pub struct ChannelConfig {
pid_engaged: bool,
i_set: ElectricCurrent,
polarity: Polarity,
sh: steinhart_hart::Parameters,
bp: b_parameter::Parameters,
pwm: PwmLimits,
/// uses variant `PostFilter::Invalid` instead of `None` to save space
adc_postfilter: PostFilter,
@ -45,7 +46,7 @@ impl ChannelConfig {
pid_engaged: state.pid_engaged,
i_set,
polarity: state.polarity.clone(),
sh: state.sh.clone(),
bp: state.bp.clone(),
pwm,
adc_postfilter,
}
@ -57,7 +58,7 @@ impl ChannelConfig {
state.pid.parameters = self.pid.clone();
state.pid.target = self.pid_target.into();
state.pid_engaged = self.pid_engaged;
state.sh = self.sh.clone();
state.bp = self.bp.clone();
self.pwm.apply(channels, channel);

2
src/main.rs
View File

@ -35,9 +35,9 @@ mod session;
use session::{Session, SessionInput};
mod command_parser;
use command_parser::Ipv4Config;
mod b_parameter;
mod channels;
mod pid;
mod steinhart_hart;
mod timer;
use channels::{Channels, CHANNELS};
mod channel;