README.md

@@ -124,6 +124,7 @@ formatted as line-delimited JSON.
 | `reset`                          | Reset the device                                                     |
 | `dfu`                            | Reset device and enters USB device firmware update (DFU) mode        |
 | `ipv4 <X.X.X.X/L> [Y.Y.Y.Y]`     | Configure IPv4 address, netmask length, and optional default gateway |
+| `fan <value>`                    | Set fan power with values from 0 to 100, where 0 is auto mode (TODO) |
 
 
 ## USB

src/channels.rs

@@ -19,12 +19,19 @@ use crate::{
     pins,
     steinhart_hart,
 };
+use crate::pins::HWRevPins;
 
 pub const CHANNELS: usize = 2;
 pub const R_SENSE: f64 = 0.05;
 // DAC chip outputs 0-5v, which is then passed through a resistor dividor to provide 0-3v range
 const DAC_OUT_V_MAX: f64 = 3.0;
 
+#[derive(Serialize, Copy, Clone)]
+pub struct HWRev {
+    pub major: u8,
+    pub minor: u8
+}
+
 // TODO: -pub
 pub struct Channels {
     channel0: Channel<Channel0>,
@@ -33,6 +40,7 @@ pub struct Channels {
     /// stm32f4 integrated adc
     pins_adc: pins::PinsAdc,
     pub pwm: pins::PwmPins,
+    pub hw_rev: HWRev
 }
 
 impl Channels {
@@ -54,7 +62,7 @@ impl Channels {
         let channel1 = Channel::new(pins.channel1, adc_calibration1);
         let pins_adc = pins.pins_adc;
         let pwm = pins.pwm;
-        let mut channels = Channels { channel0, channel1, adc, pins_adc, pwm };
+        let mut channels = Channels { channel0, channel1, adc, pins_adc, pwm, hw_rev: Self::detect_hw_rev(&pins.hwrev) };
         for channel in 0..CHANNELS {
             channels.channel_state(channel).vref = channels.read_vref(channel);
             channels.calibrate_dac_value(channel);
@@ -63,6 +71,17 @@ impl Channels {
         channels
     }
 
+    fn detect_hw_rev(hwrev_pins: &HWRevPins) -> HWRev {
+        let (h0, h1, h2, h3) = (hwrev_pins.hwrev0.is_high(), hwrev_pins.hwrev1.is_high(),
+                                hwrev_pins.hwrev2.is_high(), hwrev_pins.hwrev3.is_high());
+        match (h0, h1, h2, h3) {
+            (true, true, true, false) => HWRev {major: 1, minor: 0} ,
+            (true, false, false, false) => HWRev {major: 2, minor: 0} ,
+            (false, true, false, false) => HWRev {major: 2, minor: 2} ,
+            (_, _, _, _) => HWRev {major: 0, minor: 0}
+        }
+    }
+
     pub fn channel_state<I: Into<usize>>(&mut self, channel: I) -> &mut ChannelState {
         match channel.into() {
             0 => &mut self.channel0.state,
@@ -336,22 +355,20 @@ impl Channels {
         match (channel, pin) {
             (_, PwmPin::ISet) =>
                 panic!("i_set is no pwm pin"),
+            (_, PwmPin::Fan) =>
+                get(&self.pwm.fan),
             (0, PwmPin::MaxIPos) =>
                 get(&self.pwm.max_i_pos0),
             (0, PwmPin::MaxINeg) =>
                 get(&self.pwm.max_i_neg0),
             (0, PwmPin::MaxV) =>
                 get(&self.pwm.max_v0),
-            (0, PwmPin::Fan) =>
-                get(&self.pwm.fan),
             (1, PwmPin::MaxIPos) =>
                 get(&self.pwm.max_i_pos1),
             (1, PwmPin::MaxINeg) =>
                 get(&self.pwm.max_i_neg1),
             (1, PwmPin::MaxV) =>
                 get(&self.pwm.max_v1),
-            (1, PwmPin::Fan) =>
-                get(&self.pwm.fan),
             _ =>
                 unreachable!(),
         }
@@ -395,22 +412,20 @@ impl Channels {
         match (channel, pin) {
             (_, PwmPin::ISet) =>
                 panic!("i_set is no pwm pin"),
+            (_, PwmPin::Fan) =>
+                set(&mut self.pwm.fan, duty),
             (0, PwmPin::MaxIPos) =>
                 set(&mut self.pwm.max_i_pos0, duty),
             (0, PwmPin::MaxINeg) =>
                 set(&mut self.pwm.max_i_neg0, duty),
             (0, PwmPin::MaxV) =>
                 set(&mut self.pwm.max_v0, duty),
-            (0, PwmPin::Fan) =>
-                set(&mut self.pwm.fan, duty),
             (1, PwmPin::MaxIPos) =>
                 set(&mut self.pwm.max_i_pos1, duty),
             (1, PwmPin::MaxINeg) =>
                 set(&mut self.pwm.max_i_neg1, duty),
             (1, PwmPin::MaxV) =>
                 set(&mut self.pwm.max_v1, duty),
-            (1, PwmPin::Fan) =>
-                set(&mut self.pwm.fan, duty),
             _ =>
                 unreachable!(),
         }
@@ -437,7 +452,16 @@ impl Channels {
         (duty * max, max)
     }
 
-    fn report(&mut self, channel: usize) -> Report {
+    pub fn set_fan_pwm(&mut self, fan_pwm: u32) -> f64 {
+        let duty = fan_pwm as f64 / 100.0;
+        self.set_pwm(0, PwmPin::Fan, duty)
+    }
+
+    pub fn get_fan_pwm(&mut self) -> u32 {
+        (self.get_pwm(0, PwmPin::Fan) * 100.0) as u32
+    }
+
+    fn report(&mut self, channel: usize, tacho: Option<u32>) -> Report {
         let vref = self.channel_state(channel).vref;
         let i_set = self.get_i(channel);
         let i_tec = self.read_itec(channel);
@@ -462,13 +486,15 @@ impl Channels {
             tec_i,
             tec_u_meas: self.get_tec_v(channel),
             pid_output,
+            tacho,
+            hwrev: self.hw_rev
         }
     }
 
-    pub fn reports_json(&mut self) -> Result<JsonBuffer, serde_json_core::ser::Error> {
+    pub fn reports_json(&mut self, tacho: Option<u32>) -> Result<JsonBuffer, serde_json_core::ser::Error> {
         let mut reports = Vec::<_, U2>::new();
         for channel in 0..CHANNELS {
-            let _ = reports.push(self.report(channel));
+            let _ = reports.push(self.report(channel, tacho));
         }
         serde_json_core::to_vec(&reports)
     }
@@ -481,7 +507,7 @@ impl Channels {
         serde_json_core::to_vec(&summaries)
     }
 
-    fn pwm_summary(&mut self, channel: usize, tacho: u32) -> PwmSummary {
+    fn pwm_summary(&mut self, channel: usize) -> PwmSummary {
         PwmSummary {
             channel,
             center: CenterPointJson(self.channel_state(channel).center.clone()),
@@ -489,15 +515,14 @@ impl Channels {
             max_v: (self.get_max_v(channel), ElectricPotential::new::<volt>(5.0)).into(),
             max_i_pos: self.get_max_i_pos(channel).into(),
             max_i_neg: self.get_max_i_neg(channel).into(),
-            tacho: tacho * 1000 / 1024,
+            fan: self.get_fan_pwm(),
-            fan: self.get_pwm(0, PwmPin::Fan),
         }
     }
 
-    pub fn pwm_summaries_json(&mut self, tacho: u32) -> Result<JsonBuffer, serde_json_core::ser::Error> {
+    pub fn pwm_summaries_json(&mut self) -> Result<JsonBuffer, serde_json_core::ser::Error> {
         let mut summaries = Vec::<_, U2>::new();
         for channel in 0..CHANNELS {
-            let _ = summaries.push(self.pwm_summary(channel, tacho));
+            let _ = summaries.push(self.pwm_summary(channel));
         }
         serde_json_core::to_vec(&summaries)
     }
@@ -549,6 +574,8 @@ pub struct Report {
     tec_i: ElectricCurrent,
     tec_u_meas: ElectricPotential,
     pid_output: ElectricCurrent,
+    tacho: Option<u32>,
+    hwrev: HWRev,
 }
 
 pub struct CenterPointJson(CenterPoint);
@@ -588,8 +615,7 @@ pub struct PwmSummary {
     max_v: PwmSummaryField<ElectricPotential>,
     max_i_pos: PwmSummaryField<ElectricCurrent>,
     max_i_neg: PwmSummaryField<ElectricCurrent>,
-    tacho: u32,
+    fan: u32,
-    fan: f64,
 }
 
 #[derive(Serialize)]

src/command_handler.rs

@@ -93,8 +93,8 @@ impl Handler {
         Ok(Handler::Handled)
     }
 
-    fn show_report(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
+    fn show_report(socket: &mut TcpSocket, channels: &mut Channels, tacho: Option<u32>) -> Result<Handler, Error> {
-        match channels.reports_json() {
+        match channels.reports_json(tacho) {
             Ok(buf) => {
                 send_line(socket, &buf[..]);
             }
@@ -121,8 +121,8 @@ impl Handler {
         Ok(Handler::Handled)
     }
 
-    fn show_pwm(socket: &mut TcpSocket, channels: &mut Channels, tacho: u32) -> Result<Handler, Error> {
+    fn show_pwm(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
-        match channels.pwm_summaries_json(tacho) {
+        match channels.pwm_summaries_json() {
             Ok(buf) => {
                 send_line(socket, &buf);
             }
@@ -200,7 +200,7 @@ impl Handler {
                 channels.set_max_i_neg(channel, current);
             }
             PwmPin::Fan => {
-                channels.set_pwm(channel, PwmPin::Fan, value);
+                channels.set_fan_pwm(value as u32);
             }
         }
         send_line(socket, b"{}");
@@ -344,14 +344,26 @@ impl Handler {
         Ok(Handler::Reset)
     }
 
-    pub fn handle_command (command: Command, socket: &mut TcpSocket, channels: &mut Channels, session: &Session, leds: &mut Leds, store: &mut FlashStore, ipv4_config: &mut Ipv4Config, tacho_value: u32) -> Result<Self, Error> {
+    fn fan (channels: &mut Channels, fan_pwm: Option<u32>) -> Result<Handler, Error> {
+        match fan_pwm {
+            Some(val) => {
+                channels.set_fan_pwm(val);
+                Ok(Handler::Handled)
+            },
+            None => {
+                Err(Error::ReportError)
+            }
+        }
+    }
+
+    pub fn handle_command (command: Command, socket: &mut TcpSocket, channels: &mut Channels, session: &Session, leds: &mut Leds, store: &mut FlashStore, ipv4_config: &mut Ipv4Config, tacho_value: Option<u32>) -> Result<Self, Error> {
         match command {
             Command::Quit => Ok(Handler::CloseSocket),
             Command::Reporting(_reporting) => Handler::reporting(socket),            
             Command::Show(ShowCommand::Reporting) => Handler::show_report_mode(socket, session),            
-            Command::Show(ShowCommand::Input) => Handler::show_report(socket, channels),            
+            Command::Show(ShowCommand::Input) => Handler::show_report(socket, channels, tacho_value),
             Command::Show(ShowCommand::Pid) => Handler::show_pid(socket, channels),            
-            Command::Show(ShowCommand::Pwm) => Handler::show_pwm(socket, channels, tacho_value),
+            Command::Show(ShowCommand::Pwm) => Handler::show_pwm(socket, channels),
             Command::Show(ShowCommand::SteinhartHart) => Handler::show_steinhart_hart(socket, channels),            
             Command::Show(ShowCommand::PostFilter) => Handler::show_post_filter(socket, channels),            
             Command::Show(ShowCommand::Ipv4) => Handler::show_ipv4(socket, ipv4_config),
@@ -366,7 +378,8 @@ impl Handler {
             Command::Save { channel } => Handler::save_channel(socket, channels, channel, store),
             Command::Ipv4(config) => Handler::set_ipv4(socket, store, config),
             Command::Reset => Handler::reset(channels),
-            Command::Dfu => Handler::dfu(channels)
+            Command::Dfu => Handler::dfu(channels),
+            Command::Fan {fan_pwm} => Handler::fan(channels, fan_pwm)
         }
     }
 }

src/command_parser.rs

@@ -179,6 +179,9 @@ pub enum Command {
         rate: Option<f32>,
     },
     Dfu,
+    Fan {
+        fan_pwm: Option<u32>
+    }
 }
 
 fn end(input: &[u8]) -> IResult<&[u8], ()> {
@@ -301,16 +304,6 @@ fn pwm_setup(input: &[u8]) -> IResult<&[u8], Result<(PwmPin, f64), Error>> {
             ),
             result_with_pin(PwmPin::MaxV)
         ),
-        map(
-            preceded(
-                tag("fan"),
-                preceded(
-                    whitespace,
-                    float
-                )
-            ),
-            result_with_pin(PwmPin::Fan)
-        )
     )
     )(input)
 }
@@ -532,6 +525,22 @@ fn ipv4(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
     ))(input)
 }
 
+fn fan(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
+    let (input, _) = tag("fan")(input)?;
+    let (input, fan_pwm) = alt((
+        |input| {
+            let (input, _) = whitespace(input)?;
+            let (input, value) = unsigned(input)?;
+            let (input, _) = end(input)?;
+            Ok((input, Some(value.unwrap_or(0))))
+        },
+        value(None, end)
+    ))(input)?;
+
+    let result = Ok(Command::Fan { fan_pwm });
+    Ok((input, result))
+}
+
 fn command(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
     alt((value(Ok(Command::Quit), tag("quit")),
          load,
@@ -545,6 +554,7 @@ fn command(input: &[u8]) -> IResult<&[u8], Result<Command, Error>> {
          steinhart_hart,
          postfilter,
          value(Ok(Command::Dfu), tag("dfu")),
+         fan,
     ))(input)
 }
 

src/main.rs

@@ -152,6 +152,8 @@ fn main() -> ! {
         }
     }
 
+    let fan_available = channels.hw_rev.major == 2 && channels.hw_rev.minor == 2;
+
     // default net config:
     let mut ipv4_config = Ipv4Config {
         address: [192, 168, 1, 26],
@@ -172,17 +174,26 @@ fn main() -> ! {
     let hwaddr = EthernetAddress(eui48);
     info!("EEPROM MAC address: {}", hwaddr);
 
-    tacho.make_interrupt_source(&mut dp.SYSCFG.constrain());
+    if fan_available {
-    tacho.trigger_on_edge(&mut dp.EXTI, Edge::Rising);
+        // These lines do not cause NVIC to run the ISR,
-    tacho.enable_interrupt(&mut dp.EXTI);
+        // since the interrupt should be unmasked in the cortex_m::peripheral::NVIC.
+        // Also using interrupt-related workaround is the best
+        // option for the current version of stm32f4xx-hal,
+        // since tying the IC's PC8 with the PWM's PC9 to the same TIM8 is not supported,
+        // and therefore would require even more weirder and unsafe hacks.
+        // Also such hacks wouldn't guarantee it to be more precise.
+        tacho.make_interrupt_source(&mut dp.SYSCFG.constrain());
+        tacho.trigger_on_edge(&mut dp.EXTI, Edge::Rising);
+        tacho.enable_interrupt(&mut dp.EXTI);
+    }
 
     net::run(clocks, dp.ETHERNET_MAC, dp.ETHERNET_DMA, eth_pins, hwaddr, ipv4_config.clone(), |iface| {
         Server::<Session>::run(iface, |server| {
             leds.r1.off();
             let mut should_reset = false;
 
-            let (mut tacho_cnt, mut tacho_value) = (0u32, 0u32);
+            let (mut tacho_cnt, mut tacho_value) = (0u32, None);
-            let mut prev_epoch = i64::from(timer::now()) >> 10;
+            let mut prev_epoch: i64 = 0;
 
             loop {
                 let mut new_ipv4_config = None;
@@ -193,17 +204,23 @@ fn main() -> ! {
                 }
 
                 let instant = Instant::from_millis(i64::from(timer::now()));
-                let tacho_input = tacho.check_interrupt();
-                tacho.clear_interrupt_pending_bit();
-                if tacho_input {
-                    tacho_cnt += 1;
-                }
 
-                let epoch = instant.millis >> 10;
+                if fan_available {
-                if epoch > prev_epoch {
+                    let mut tacho_input = false;
-                    tacho_value = tacho_cnt;
+                    cortex_m::interrupt::free(|_cs| {
-                    tacho_cnt  = 0;
+                        tacho_input = tacho.check_interrupt();
-                    prev_epoch = epoch;
+                        tacho.clear_interrupt_pending_bit();
+                    });
+                    if tacho_input {
+                        tacho_cnt += 1;
+                    }
+
+                    let epoch = instant.secs();
+                    if epoch > prev_epoch {
+                        tacho_value = Some(tacho_cnt);
+                        tacho_cnt = 0;
+                        prev_epoch = epoch;
+                    }
                 }
 
                 cortex_m::interrupt::free(net::clear_pending);
@@ -245,7 +262,7 @@ fn main() -> ! {
                             }
                         } else if socket.can_send() {
                             if let Some(channel) = session.is_report_pending() {
-                                match channels.reports_json() {
+                                match channels.reports_json(tacho_value) {
                                     Ok(buf) => {
                                         send_line(&mut socket, &buf[..]);
                                         session.mark_report_sent(channel);

src/pins.rs

@@ -101,6 +101,13 @@ pub struct ChannelPinSet<C: ChannelPins> {
     pub tec_u_meas_pin: C::TecUMeasPin,
 }
 
+pub struct HWRevPins {
+    pub hwrev0: stm32f4xx_hal::gpio::gpiod::PD0<Input<Floating>>,
+    pub hwrev1: stm32f4xx_hal::gpio::gpiod::PD1<Input<Floating>>,
+    pub hwrev2: stm32f4xx_hal::gpio::gpiod::PD2<Input<Floating>>,
+    pub hwrev3: stm32f4xx_hal::gpio::gpiod::PD3<Input<Floating>>,
+}
+
 pub struct Pins {
     pub adc_spi: AdcSpi,
     pub adc_nss: AdcNss,
@@ -108,6 +115,7 @@ pub struct Pins {
     pub pwm: PwmPins,
     pub channel0: ChannelPinSet<Channel0>,
     pub channel1: ChannelPinSet<Channel1>,
+    pub hwrev: HWRevPins
 }
 
 impl Pins {
@@ -141,8 +149,6 @@ impl Pins {
             gpioe.pe13, gpioe.pe14, gpioc.pc9
         );
 
-       // let tacho = gpioc.pc8.into_floating_input().into_input_pin()();
-
         let (dac0_spi, dac0_sync) = Self::setup_dac0(
             clocks, spi4,
             gpioe.pe2, gpioe.pe4, gpioe.pe6
@@ -189,6 +195,8 @@ impl Pins {
             pwm,
             channel0,
             channel1,
+            hwrev: HWRevPins {hwrev0: gpiod.pd0, hwrev1: gpiod.pd1,
+                hwrev2: gpiod.pd2, hwrev3: gpiod.pd3}
         };
 
         let leds = Leds::new(gpiod.pd9, gpiod.pd10.into_push_pull_output(), gpiod.pd11.into_push_pull_output());