M-Labs/thermostat
9
0
Fork 5
Code Issues 9 Pull Requests 7 Releases Wiki Activity

Don't load REF pin of MAX1968 chip on HWRevs < 3.0 #103

Merged
sb10q merged 1 commits from atse/thermostat:stop_loading_vref into master 2024-04-24 18:04:56 +08:00
Conversation 0 Commits 1 Files Changed 2 +41 -21
2 changed files with 41 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
src/channels.rs
View File

@ -18,7 +18,7 @@ use crate::{
channel_state::ChannelState,
command_parser::{CenterPoint, PwmPin},
command_handler::JsonBuffer,
pins,
pins::{self, Channel0VRef, Channel1VRef},
steinhart_hart,
hw_rev,
};
@ -203,20 +203,30 @@ impl<'a> Channels<'a> {
pub fn read_vref(&mut self, channel: usize) -> ElectricPotential {
match channel {
0 => {
match &self.channel0.vref_pin {
Channel0VRef::Analog(vref_pin) => {
let sample = self.pins_adc.convert(
&self.channel0.vref_pin,
vref_pin,
stm32f4xx_hal::adc::config::SampleTime::Cycles_480
);
let mv = self.pins_adc.sample_to_millivolts(sample);
ElectricPotential::new::<millivolt>(mv as f64)
},
Channel0VRef::Disabled(_) => ElectricPotential::new::<volt>(1.5)
}
}
1 => {
match &self.channel1.vref_pin {
Channel1VRef::Analog(vref_pin) => {
let sample = self.pins_adc.convert(
&self.channel1.vref_pin,
vref_pin,
stm32f4xx_hal::adc::config::SampleTime::Cycles_480
);
let mv = self.pins_adc.sample_to_millivolts(sample);
ElectricPotential::new::<millivolt>(mv as f64)
},
Channel1VRef::Disabled(_) => ElectricPotential::new::<volt>(1.5)
}
}
_ => unreachable!(),
}

26
src/pins.rs
View File

@ -66,21 +66,31 @@ pub trait ChannelPins {
type TecUMeasPin;
}
pub enum Channel0VRef {
Analog(PA0<Analog>),
Disabled(PA0<Input<Floating>>),
}
impl ChannelPins for Channel0 {
type DacSpi = Dac0Spi;
type DacSync = PE4<Output<PushPull>>;
type Shdn = PE10<Output<PushPull>>;
type VRefPin = PA0<Analog>;
type VRefPin = Channel0VRef;
type ItecPin = PA6<Analog>;
type DacFeedbackPin = PA4<Analog>;
type TecUMeasPin = PC2<Analog>;
}
pub enum Channel1VRef {
Analog(PA3<Analog>),
Disabled(PA3<Input<Floating>>),
}
impl ChannelPins for Channel1 {
type DacSpi = Dac1Spi;
type DacSync = PF6<Output<PushPull>>;
type Shdn = PE15<Output<PushPull>>;
type VRefPin = PA3<Analog>;
type VRefPin = Channel1VRef;
type ItecPin = PB0<Analog>;
type DacFeedbackPin = PA5<Analog>;
type TecUMeasPin = PC3<Analog>;
@ -150,13 +160,17 @@ impl Pins {
gpioe.pe13, gpioe.pe14
);
let hwrev = HWRev::detect_hw_rev(&HWRevPins {hwrev0: gpiod.pd0, hwrev1: gpiod.pd1,
hwrev2: gpiod.pd2, hwrev3: gpiod.pd3});
let hw_settings = hwrev.settings();
let (dac0_spi, dac0_sync) = Self::setup_dac0(
clocks, spi4,
gpioe.pe2, gpioe.pe4, gpioe.pe6
);
let mut shdn0 = gpioe.pe10.into_push_pull_output();
let _ = shdn0.set_low();
let vref0_pin = gpioa.pa0.into_analog();
let vref0_pin = if hwrev.major > 2 {Channel0VRef::Analog(gpioa.pa0.into_analog())} else {Channel0VRef::Disabled(gpioa.pa0)};
let itec0_pin = gpioa.pa6.into_analog();
let dac_feedback0_pin = gpioa.pa4.into_analog();
let tec_u_meas0_pin = gpioc.pc2.into_analog();
@ -176,7 +190,7 @@ impl Pins {
);
let mut shdn1 = gpioe.pe15.into_push_pull_output();
let _ = shdn1.set_low();
let vref1_pin = gpioa.pa3.into_analog();
let vref1_pin = if hwrev.major > 2 {Channel1VRef::Analog(gpioa.pa3.into_analog())} else {Channel1VRef::Disabled(gpioa.pa3)};
let itec1_pin = gpiob.pb0.into_analog();
let dac_feedback1_pin = gpioa.pa5.into_analog();
let tec_u_meas1_pin = gpioc.pc3.into_analog();
@ -198,10 +212,6 @@ impl Pins {
channel1,
};
let hwrev = HWRev::detect_hw_rev(&HWRevPins {hwrev0: gpiod.pd0, hwrev1: gpiod.pd1,
hwrev2: gpiod.pd2, hwrev3: gpiod.pd3});
let hw_settings = hwrev.settings();
let leds = Leds::new(gpiod.pd9, gpiod.pd10.into_push_pull_output(), gpiod.pd11.into_push_pull_output());
let eeprom_scl = gpiob.pb8.into_alternate().set_open_drain();