Issues - thermostat - M-Labs Git

New Issue

Open

check that firmware starts with USB cable disconnected from PC

#58 by sb10q was closed

1

test Zotino DAC temperature stabilization

#57 by sb10q was closed

5

possible TEC current spike on startup

#56 by sb10q was closed

1

get FLASH_SECTOR_OFFSET from linker script

#48 by sb10q was closed

close TCP connections before network-initiated reset

#47 by sb10q was closed

client.py report_mode may yield empty object

#42 by topquark12 was closed

4

add basic setup instructions to doc

#39 by sb10q was closed

1

code review

#38 by sb10q was closed

4

enable anti integral windup when compliance voltage is reached

#37 by sb10q was closed

2

check that PID stabilizes in pid.rs test

#34 by sb10q was closed

1

save hangs

#33 by jbqubit was closed

2

software activation of boot-into-DFU mode

#26 by jbqubit was closed

2

review (firmware-hardware) vs (Thermostat design goals)

#24 by jbqubit was closed

5

loop servo time step / PID autotune

#11 by jbqubit was closed

19