thermostat

get vs set command nomenclature, eg report?

1

#28 by jbqubit was closed 2020-12-21 04:06:14 +08:00

Thermostat v2.0 temp sense fix

1

#12 by jbqubit was closed 2020-12-07 07:24:36 +08:00

get ipv4 missing

1

#30 by jbqubit was closed 2020-12-21 03:50:15 +08:00

ipv4 192.168.1.52 "invalid input"

8

#29 by jbqubit was closed 2020-12-19 04:24:17 +08:00

check that PID stabilizes in pid.rs test

1

#34 by sb10q was closed 2020-12-28 17:45:35 +08:00

pytec regression get_pwm()

4

#31 by jbqubit was closed 2020-12-28 17:49:12 +08:00

M-Labs TEC with 10K RTD

6

#32 by jbqubit was closed 2020-12-25 09:25:56 +08:00

loop servo time step / PID autotune

19

#11 by jbqubit was closed 2021-01-06 11:28:19 +08:00

add basic setup instructions to doc

1

#39 by sb10q was closed 2021-01-07 15:12:48 +08:00

save hangs

2

#33 by jbqubit was closed 2021-01-07 18:02:05 +08:00

enable anti integral windup when compliance voltage is reached

2

#37 by sb10q was closed 2021-01-11 20:30:43 +08:00

software activation of boot-into-DFU mode

2

#26 by jbqubit was closed 2021-01-13 11:59:22 +08:00

get FLASH_SECTOR_OFFSET from linker script

#48 by sb10q was closed 2021-01-13 17:30:19 +08:00

code review

4

#38 by sb10q was closed 2021-01-25 19:55:22 +08:00

review (firmware-hardware) vs (Thermostat design goals)

5

#24 by jbqubit was closed 2021-01-25 20:23:25 +08:00

close TCP connections before network-initiated reset

#47 by sb10q was closed 2021-01-26 17:45:20 +08:00

client.py report_mode may yield empty object

4

#42 by topquark12 was closed 2021-01-29 16:18:08 +08:00

possible TEC current spike on startup

1

#56 by sb10q was closed 2021-02-11 10:59:07 +08:00

README.md not-ready-for-lab-use warning

5

#23 by jbqubit was closed 2020-12-09 08:18:58 +08:00

check that firmware starts with USB cable disconnected from PC

1

#58 by sb10q was closed 2021-06-07 10:01:02 +08:00

Labels Milestones