README: arm-none-eabi-objcopy -> llvm-objcopy
Match flake.nix installPhase.
This commit is contained in:
parent
f0538a571c
commit
8c9bd2ce29
|
@ -45,7 +45,7 @@ There are several options for flashing Thermostat. DFU requires only a micro-USB
|
|||
|
||||
### dfu-util on Linux
|
||||
* Install the DFU USB tool (dfu-util).
|
||||
* Convert firmware from ELF to BIN: `arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra)
|
||||
* Convert firmware from ELF to BIN: `llvm-objcopy -O binary target/thumbv7em-none-eabihf/release/thermostat thermostat.bin` (you can skip this step if using the BIN from Hydra)
|
||||
* Connect to the Micro USB connector to Thermostat below the RJ45.
|
||||
* Add jumper to Thermostat v2.0 across 2-pin jumper adjacent to JTAG connector.
|
||||
* Cycle board power to put it in DFU update mode
|
||||
|
|
Loading…
Reference in New Issue