148 lines
4.8 KiB
Python
148 lines
4.8 KiB
Python
# This file is part of Fast Servo Software Package.
|
|
#
|
|
# Copyright (C) 2023 Jakub Matyas
|
|
# Warsaw University of Technology <jakubk.m@gmail.com>
|
|
# SPDX-License-Identifier: GPL-3.0-or-later
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
import time
|
|
|
|
import spidev
|
|
from pyfastservo.common import (
|
|
CH0_HIGH_WORD_ADDR,
|
|
CH0_LOW_WORD_ADDR,
|
|
CH1_HIGH_WORD_ADDR,
|
|
CH1_LOW_WORD_ADDR,
|
|
CTRL_ADDR,
|
|
MAP_MASK,
|
|
PAGESIZE,
|
|
write_to_memory,
|
|
read_from_memory
|
|
)
|
|
|
|
# /dev/spidev2.0 <=> spidev<BUS>.<DEVICE>
|
|
MAIN_DAC_BUS = 2
|
|
MAIN_DAC_DEVICE = 0
|
|
DAC_VERSION = 0x0A
|
|
|
|
|
|
def spi_write(spi, address, value):
|
|
spi.xfer2([address, value])
|
|
|
|
def spi_read(spi, address):
|
|
rx_buffer = spi.xfer2([0x80 | address, 0x00])
|
|
return rx_buffer[1]
|
|
|
|
def hard_reset(spi):
|
|
spi_write(spi, 0x00, 0x10) # Software reset
|
|
spi_write(spi, 0x00, 0x00) # Release software reset
|
|
spi_read(spi, 0x00) # Read reset address (necessary for reset to take effect)
|
|
|
|
def check_version(spi):
|
|
version = spi_read(spi, 0x1F)
|
|
print(f"DAC version: 0x{version:02X}")
|
|
return version == DAC_VERSION
|
|
|
|
def configure_dac(spi):
|
|
power_down_reg = spi_read(spi, 0x01)
|
|
spi_write(spi, 0x01, power_down_reg & ~(1 << 0)) # Clear EXTREF bit for internal reference
|
|
spi_write(spi, 0x0D, 0x00) # Set RREF to 10 kΩ for 1.0V reference
|
|
spi_write(spi, 0x04, 0xA0) # Enable on-chip IRSET (1.6 kΩ for 20mA output)
|
|
spi_write(spi, 0x07, 0xA0) # Enable on-chip QRSET (1.6 kΩ for 20mA output)
|
|
spi_write(spi, 0x05, 0x00) # Disable internal IRCML
|
|
spi_write(spi, 0x08, 0x00) # Disable internal QRCML
|
|
spi_write(spi, 0x02, 0xB4) # Enable 2's complement, LVDS interface, 4 LVDS lanes
|
|
|
|
def dac_self_calibration(spi):
|
|
spi_write(spi, 0x12, 0x00) # Reset calibration status
|
|
spi_write(spi, 0x0E, 0x08) # Enable calibration clock, default divide ratio
|
|
spi_write(spi, 0x0E, 0x38) # CALSELI = 1, CALSELQ = 1, CALCLK = 1
|
|
spi_write(spi, 0x12, 0x10) # Set CALEN bit
|
|
|
|
while True:
|
|
status = spi_read(spi, 0x0F)
|
|
if status & 0xC0 == 0xC0: # Both CALSTATI and CALSTATQ are 1
|
|
break
|
|
time.sleep(0.01)
|
|
|
|
spi_write(spi, 0x12, 0x00) # Clear calibration bits
|
|
spi_write(spi, 0x0E, 0x30) # Keep CALSELI and CALSELQ set, clear CALCLK
|
|
print("DAC self-calibration completed")
|
|
|
|
def manual_override(enable=True):
|
|
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
|
print(f"REG contents: 0b{reg_contents:03b}")
|
|
to_write = reg_contents | 0b1 if enable else reg_contents & 0b110
|
|
write_to_memory(CTRL_ADDR, to_write)
|
|
|
|
def power_down(channel, power_down=True):
|
|
assert channel in (0, 1)
|
|
|
|
bitmask = 1 << (channel + 1) & 0b111
|
|
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
|
value = (1 if power_down else 0) << (channel + 1)
|
|
reg_contents &= ~bitmask
|
|
|
|
to_write = reg_contents | value
|
|
write_to_memory(CTRL_ADDR, to_write)
|
|
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
|
print(f"REG contents: 0b{reg_contents:03b}")
|
|
|
|
def set_dac_output(value):
|
|
value = min(value, 0x3FFF)
|
|
low_word = value & 0xFF
|
|
high_word = (value >> 8) & 0x3F
|
|
|
|
write_to_memory(CH0_HIGH_WORD_ADDR, high_word)
|
|
write_to_memory(CH0_LOW_WORD_ADDR, low_word)
|
|
write_to_memory(CH1_HIGH_WORD_ADDR, high_word)
|
|
write_to_memory(CH1_LOW_WORD_ADDR, low_word)
|
|
print(f"DAC output set to: 0x{value:04X}")
|
|
|
|
def configure_ad9117():
|
|
spi = spidev.SpiDev()
|
|
spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE)
|
|
spi.max_speed_hz = 5000
|
|
spi.mode = 0b00 # CPOL = 0 CPHA = 0
|
|
spi.cshigh = False
|
|
|
|
try:
|
|
hard_reset(spi)
|
|
if not check_version(spi):
|
|
print("Unrecognized DAC version")
|
|
return False
|
|
|
|
configure_dac(spi)
|
|
dac_self_calibration(spi)
|
|
|
|
# Enable DAC outputs
|
|
spi_write(spi, 0x01, spi_read(spi, 0x01) & ~((1 << 4) | (1 << 3)))
|
|
|
|
power_down(0, False)
|
|
power_down(1, False)
|
|
manual_override(True)
|
|
|
|
print("AD9117 configuration completed successfully")
|
|
return True
|
|
|
|
except Exception as e:
|
|
print(f"Error configuring AD9117: {e}")
|
|
return False
|
|
|
|
finally:
|
|
spi.close()
|
|
|
|
if __name__ == "__main__":
|
|
configure_ad9117() |