diff --git a/fast-servo/pyfastservo/README.md b/fast-servo/pyfastservo/README.md new file mode 100644 index 0000000..2b8a95f --- /dev/null +++ b/fast-servo/pyfastservo/README.md @@ -0,0 +1,5 @@ +## Source Repository +Files in this directory were copied from [elhep/Fast-Servo-Firmware](https://github.com/elhep/Fast-Servo-Firmware/tree/master/fast_servo/pythonscripts). + +## Commit ID +The files were copied from commit ID [7fae40c](https://github.com/elhep/Fast-Servo-Firmware/commit/7fae40c0f872a91218be378f8289b98b1e366729). \ No newline at end of file diff --git a/fast-servo/pyfastservo/__init__.py b/fast-servo/pyfastservo/__init__.py new file mode 100644 index 0000000..e69de29 diff --git a/fast-servo/pyfastservo/adc.py b/fast-servo/pyfastservo/adc.py new file mode 100644 index 0000000..a3fd106 --- /dev/null +++ b/fast-servo/pyfastservo/adc.py @@ -0,0 +1,319 @@ +# This file is part of Fast Servo Software Package. +# +# Copyright (C) 2023 Jakub Matyas +# Warsaw University of Technology +# SPDX-License-Identifier: GPL-3.0-or-later +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +import mmap +import os + +import spidev +from common import ( + ADC_AFE_CTRL_ADDR, + ADC_BITSLIP_ADDR, + ADC_CH0_HIGH_ADDR, + ADC_CH0_LOW_ADDR, + ADC_CH1_HIGH_ADDR, + ADC_CH1_LOW_ADDR, + ADC_DELAY_ADDR, + ADC_FRAME_ADDR, + AUX_ADC_ADDR, + MAP_MASK, + PAGESIZE, +) + +# /dev/spidev1.0 <=> spidev. +MAIN_ADC_BUS = 1 +MAIN_ADC_DEVICE = 1 + +AUX_ADC_BUS = 1 +AUX_ADC_PORT_A = 2 +AUX_ADC_PORT_B = 3 + + +def main_adc_config(test_pattern): + high_word = (test_pattern & 0xFF00) >> 8 + low_word = test_pattern & 0xFF + + spi = spidev.SpiDev() + + try: + spi.open(MAIN_ADC_BUS, MAIN_ADC_DEVICE) + spi.max_speed_hz = 50000 + spi.mode = 0b00 # CPOL = 0 CPHA = 0 + spi.cshigh = True + # spi.read0 = False + + spi_buffer = [0x00, 0x80] # reset + rx_buffer = [0x00, 0x00] + + spi.xfer2(spi_buffer) + + # REGISTER A1 + spi_buffer = [0x01, 0x20] # set to Two's complement Data Format + spi.xfer2(spi_buffer) + + # read values back + spi_buffer = [0x81, 0x00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"Spi readback register 0x01: 0x{rx_buffer[1]:02x}") + if rx_buffer[1] != 0x20: + print("Different value read than sent in reg 0x02") + + # REGISTER A2 + spi_buffer = [ + 0x02, + 0x15, + ] # set to LVDS output, set 4 data lanes and turn on test mode + spi.xfer2(spi_buffer) + + # read values back + spi_buffer = [0x82, 0x00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"Spi readback register 0x02: 0x{rx_buffer[1]:02x}") + if rx_buffer[1] != 0x15: + print("Different value read than sent in reg 0x02") + + # REGISTER A3 + # test pattern high word + spi_buffer = [0x03, high_word] + spi.xfer2(spi_buffer) + + # read balues back + spi_buffer = [0x83, 0x00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"Spi readback register 0x03: 0x{rx_buffer[1]:02x}") + if rx_buffer[1] != high_word: + print("Different value read than sent in reg 0x03") + + # REGISTER A4 + # test pattern low word + spi_buffer = [0x04, low_word] + spi.xfer2(spi_buffer) + + # read balues back + spi_buffer = [0x84, 0x00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"Spi readback register 0x04: 0x{rx_buffer[1]:02x}") + if rx_buffer[1] != low_word: + print("Different value read than sent in reg 0x04") + finally: + spi.close() + + +def main_adc_test_mode(enable): + spi = spidev.SpiDev() + + try: + spi.open(MAIN_ADC_BUS, MAIN_ADC_DEVICE) + spi.max_speed_hz = 50000 + spi.mode = 0b00 # CPOL = 0 CPHA = 0 + spi.cshigh = True + # spi.read0 = True + + reg_contents = ( + 0x15 if enable else 0x11 + ) # set to LVDS output, set 4 data lanes and turn on or off test mode + spi_buffer = [0x02, reg_contents] + spi.xfer2(spi_buffer) + + # read values back + spi_buffer = [0x82, 0x00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"Spi readback register 0x02: 0x{rx_buffer[1]:02x}") + if rx_buffer[1] != reg_contents: + print("Different value read than sent in reg 0x02") + finally: + spi.close() + + +def read_from_memory(address, n_bytes): + assert n_bytes <= 4 + addr = address + + try: + f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR) + with mmap.mmap( + f, + PAGESIZE, + mmap.MAP_SHARED, + mmap.PROT_READ | mmap.PROT_WRITE, + offset=addr & ~MAP_MASK, + ) as mem: + start_addr = addr & MAP_MASK + stop_addr = start_addr + 4 + # print(f"addr: 0x{addr:x}\tstart_addr: 0x{start_addr}\tstop_addr: 0x{stop_addr}") + contents = mem[start_addr:stop_addr] + read_value = list(contents)[:n_bytes] + # print("Read value: ", read_value) + finally: + os.close(f) + + return read_value + + +def write_to_memory(address, value): + value_bytes = value.to_bytes(4, "little") + addr = address + + try: + f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR) + with mmap.mmap( + f, + PAGESIZE, + mmap.MAP_SHARED, + mmap.PROT_READ | mmap.PROT_WRITE, + offset=addr & ~MAP_MASK, + ) as mem: + start_addr = addr & MAP_MASK + stop_addr = start_addr + 4 + # print(f"addr: 0x{addr:x}\tstart_addr: 0x{start_addr}\tstop_addr: 0x{stop_addr}") + mem[start_addr:stop_addr] = value_bytes + contents = mem[start_addr:stop_addr] + # print("Read value: ", list(contents), " written value: ", list(value_bytes)) + finally: + os.close(f) + + +def word_align(): + + value = 0 + edge_detected = False + transition = False + tap_delay = 0 + + for i in range(4): + current_frame = read_from_memory(ADC_FRAME_ADDR, 1)[0] + if current_frame != 0x0C: + print( + f"Performing bitslip (bitslip iteration: {i}). Reason: current_frame is 0x{current_frame:02x} instead of 0x0C" + ) + write_to_memory(ADC_BITSLIP_ADDR, 1) + else: + print(f"No bitslip required; Currernt frame = 0x{current_frame:02x}") + break + + current_frame = read_from_memory(ADC_FRAME_ADDR, 1)[0] + prev_frame = current_frame + + for i in range(32): + write_to_memory(ADC_DELAY_ADDR, tap_delay) + if edge_detected == 1: + break + current_frame = read_from_memory(ADC_FRAME_ADDR, 1)[0] + + print(f"Tap delay: {tap_delay}") + print(f"Current frame: 0x{current_frame:02x}") + + if current_frame == prev_frame: + tap_delay += 1 + elif not transition: + tap_delay += 1 + transition = True + elif transition: + tap_delay = i // 2 + edge_detected = True + + prev_frame = current_frame + + if not edge_detected: + tap_delay = 11 # empirically tested to work best + write_to_memory(ADC_DELAY_ADDR, tap_delay) + print(f"No edge detected; setting iDelay to: {tap_delay}") + if edge_detected: + write_to_memory(ADC_DELAY_ADDR, tap_delay + 2) + print(f"Edge detected; setting iDelay to (tap_delay + 2): {tap_delay} + 2") + + adc_ch0 = read_from_memory(ADC_CH0_HIGH_ADDR, 4) + print(f"ADC_CH0: 0x{adc_ch0}") + + adc_ch0 = (read_from_memory(ADC_CH0_HIGH_ADDR, 1)[0] << 8) | read_from_memory( + ADC_CH0_LOW_ADDR, 1 + )[0] + adc_ch1 = (read_from_memory(ADC_CH1_HIGH_ADDR, 1)[0] << 8) | read_from_memory( + ADC_CH1_LOW_ADDR, 1 + )[0] + print(f"Final ADC_CH0: 0x{adc_ch0:04x}") + print(f"Final ADC_CH1: 0x{adc_ch1:04x}") + + +def modify_bit(original_value, position, bit_value): + mask = 1 << position + return (original_value & ~mask) | (bit_value << position) + + +def adc_aux_config(): + # MSB to LSB + # | RANGE | ADDR [2:0] | DIFF | + # DIFF = 0 => configure as single ended (it is negated in gateware) + # RANGE = 0 => configure as 0-2.5 Vref + to_write = 0b00000 + write_to_memory(AUX_ADC_ADDR, to_write) + + +def adc_aux_read(port, type, pin): + # port: + # 1 - port A + # 2 - port B + # type: + # 0 - single-ended + # 1 - differential + # pin: + # 0b000 - VA1/VB1 + # 0b001 - VA2/VB2 + # 0b010 - VA3/VB3 + # 0b011 - VA4/VB4 + + assert type in (0, 1) + assert port in (1, 2) + + write_buffer = [0, 0] + read_buffer = [0, 0] + + aux_config_reg = read_from_memory(AUX_ADC_ADDR, 1)[0] + aux_config = (aux_config_reg & 0b10001) | pin << 1 + write_to_memory(AUX_ADC_ADDR, aux_config) + + spi = spidev.SpiDev() + try: + spi.open(1, 3) # AUX ADC 1? + spi.max_speed_hz = 5000 + spi.mode = 0b00 + spi.cshigh = True + + read_buffer = spi.xfer2(write_buffer) + mu_voltage = read_buffer[0] << 8 | read_buffer[1] >> 2 + print(f"MU_voltage: 0x{mu_voltage:04X}") + print(f"Read_buffer[0]: 0x{read_buffer[0]:02X}") + print(f"Read_buffer[1]: 0x{read_buffer[1]:02X}") + return mu_voltage * 2.5 / 4096 + + finally: + spi.close() + + +def main(): + main_adc_config(0x811F) + word_align() + + main_adc_test_mode(False) + + write_to_memory(ADC_AFE_CTRL_ADDR, 0b1100) # {-, -, ch2_X10, ch1_X10} + print(read_from_memory(ADC_AFE_CTRL_ADDR, 1)[0]) + + +if __name__ == "__main__": + main() \ No newline at end of file diff --git a/fast-servo/pyfastservo/common.py b/fast-servo/pyfastservo/common.py new file mode 100644 index 0000000..b14c44b --- /dev/null +++ b/fast-servo/pyfastservo/common.py @@ -0,0 +1,74 @@ +# This file is part of Fast Servo Software Package. +# +# Copyright (C) 2023 Jakub Matyas +# Warsaw University of Technology +# SPDX-License-Identifier: GPL-3.0-or-later +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +CSR_SIZE = 0x800 +MAP_SIZE = 0x1000 +MAP_MASK = 0xFFF +PAGESIZE = 0x1000 + +LINIEN_OFFSET = 0x0 +# LINIEN_OFFSET = 0x300000 + +# ---------------------------------------------------------------- +# FRONT PANEL LEDS REGISTER ADDRESSES +LED0_BASE_ADDR = 0x40005000 + LINIEN_OFFSET +LED1_BASE_ADDR = 0x40005800 + LINIEN_OFFSET +LED2_BASE_ADDR = 0x40006000 + LINIEN_OFFSET +LED3_BASE_ADDR = 0x40006800 + LINIEN_OFFSET + + +# ---------------------------------------------------------------- +# DAC REGISTER ADDRESSES +ADC_BASE_ADDR = 0x40004800 + LINIEN_OFFSET +ADC_FRAME_OFFSET = 0x0 +ADC_CH0_HIGH_OFFSET = 0x4 +ADC_CH0_LOW_OFFSET = 0x8 +ADC_CH1_HIGH_OFFSET = 0xC +ADC_CH1_LOW_OFFSET = 0x10 +ADC_TAP_DELAY_OFFSET = 0x14 +ADC_BITSLIP_OFFSET = 0x18 +ADC_AFE_CTRL_OFFSET = 0x1C + + +ADC_FRAME_ADDR = ADC_BASE_ADDR + ADC_FRAME_OFFSET +ADC_CH0_HIGH_ADDR = ADC_BASE_ADDR + ADC_CH0_HIGH_OFFSET +ADC_CH0_LOW_ADDR = ADC_BASE_ADDR + ADC_CH0_LOW_OFFSET +ADC_CH1_HIGH_ADDR = ADC_BASE_ADDR + ADC_CH1_HIGH_OFFSET +ADC_CH1_LOW_ADDR = ADC_BASE_ADDR + ADC_CH1_LOW_OFFSET +ADC_DELAY_ADDR = ADC_BASE_ADDR + ADC_TAP_DELAY_OFFSET +ADC_BITSLIP_ADDR = ADC_BASE_ADDR + ADC_BITSLIP_OFFSET +ADC_AFE_CTRL_ADDR = ADC_BASE_ADDR + ADC_AFE_CTRL_OFFSET + +AUX_ADC_ADDR = 0x40007800 + LINIEN_OFFSET + + +# ---------------------------------------------------------------- +# DAC REGISTER ADDRESSES +DAC_BASE_ADDR = 0x40007000 + LINIEN_OFFSET +CTRL_OFFSET = 0x0 +CH0_HIGH_WORD_OFFSET = 0x4 +CH0_LOW_WORD_OFFSET = 0x8 +CH1_HIGH_WORD_OFFSET = 0xC +CH1_LOW_WORD_OFFSET = 0x10 + +CTRL_ADDR = DAC_BASE_ADDR + CTRL_OFFSET +CH0_HIGH_WORD_ADDR = DAC_BASE_ADDR + CH0_HIGH_WORD_OFFSET +CH0_LOW_WORD_ADDR = DAC_BASE_ADDR + CH0_LOW_WORD_OFFSET +CH1_HIGH_WORD_ADDR = DAC_BASE_ADDR + CH1_HIGH_WORD_OFFSET +CH1_LOW_WORD_ADDR = DAC_BASE_ADDR + CH1_LOW_WORD_OFFSET \ No newline at end of file diff --git a/fast-servo/pyfastservo/dac.py b/fast-servo/pyfastservo/dac.py new file mode 100644 index 0000000..33bf477 --- /dev/null +++ b/fast-servo/pyfastservo/dac.py @@ -0,0 +1,182 @@ +# This file is part of Fast Servo Software Package. +# +# Copyright (C) 2023 Jakub Matyas +# Warsaw University of Technology +# SPDX-License-Identifier: GPL-3.0-or-later +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +import mmap +import os + +import spidev +from common import ( + CH0_HIGH_WORD_ADDR, + CH0_LOW_WORD_ADDR, + CH1_HIGH_WORD_ADDR, + CH1_LOW_WORD_ADDR, + CTRL_ADDR, + MAP_MASK, + PAGESIZE, +) + +# /dev/spidev2.0 <=> spidev. +MAIN_DAC_BUS = 2 +MAIN_DAC_DEVICE = 0 + +DAC_VERSION = 0x0A + + +def main_dac_init(): + spi = spidev.SpiDev() + + try: + spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE) + spi.max_speed_hz = 5000 + spi.mode = 0b00 # CPOL = 0 CPHA = 0 + spi.cshigh = True + + spi_buffer = [0x00, 0x10] # software reset + spi.xfer2(spi_buffer) + + spi_buffer = [0x00, 0x00] # release software reset + spi.xfer2(spi_buffer) + + spi_buffer = [ + 0x80, + 0x00, + ] # for some reason it is needed to read the reset address for reset to actually reset + rx_buffer = spi.xfer2(spi_buffer) + + spi_buffer = [0x9F, 0x00] # hardware version + rx_buffer = spi.xfer2(spi_buffer) + if rx_buffer[1] != DAC_VERSION: + print(f"Unrecognized device: 0x{rx_buffer[1]:02X}") + + print("=== Contents of spi buffer after DAC VERSION read back: ===") + print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}") + + spi_buffer = [0x82, 00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}") + + # set to 2's complement and I to be first of pair on data input pads + spi_buffer = [0x02, 0xB4] + rx_buffer = spi.xfer2(spi_buffer) + spi_buffer = [0x82, 00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}") + + for i in range(10): + spi_buffer = [0x94, 0x00] + rx_buffer = spi.xfer2(spi_buffer) + print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}") + + finally: + spi.close() + + +def read_from_memory(address, n_bytes): + assert n_bytes <= 4 + addr = address + + try: + f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR) + with mmap.mmap( + f, + PAGESIZE, + mmap.MAP_SHARED, + mmap.PROT_READ | mmap.PROT_WRITE, + offset=addr & ~MAP_MASK, + ) as mem: + start_addr = addr & MAP_MASK + stop_addr = start_addr + 4 + # print(f"addr: 0x{addr:x}\tstart_addr: 0x{start_addr}\tstop_addr: 0x{stop_addr}") + contents = mem[start_addr:stop_addr] + read_value = list(contents)[:n_bytes] + finally: + os.close(f) + + return read_value + + +def write_to_memory(address, value): + value_bytes = value.to_bytes(4, "little") + addr = address + + try: + f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR) + with mmap.mmap( + f, + PAGESIZE, + mmap.MAP_SHARED, + mmap.PROT_READ | mmap.PROT_WRITE, + offset=addr & ~MAP_MASK, + ) as mem: + start_addr = addr & MAP_MASK + stop_addr = start_addr + 4 + mem[start_addr:stop_addr] = value_bytes + contents = mem[start_addr:stop_addr] + finally: + os.close(f) + + +def manual_override(enable=True): + reg_contents = read_from_memory(CTRL_ADDR, 1)[0] + print(f"REG contents: 0b{reg_contents:03b}") + to_write = reg_contents | 0b1 if enable else reg_contents & 0b110 + write_to_memory(CTRL_ADDR, to_write) + + +def power_down(channel, power_down=True): + assert channel in (0, 1) + + bitmask = 1 << (channel + 1) & 0b111 + reg_contents = read_from_memory(CTRL_ADDR, 1)[0] + value = (1 if power_down else 0) << (channel + 1) + reg_contents &= ~bitmask + + to_write = reg_contents | value + write_to_memory(CTRL_ADDR, to_write) + reg_contents = read_from_memory(CTRL_ADDR, 1)[0] + print(f"REG contents: 0b{reg_contents:03b}") + + +def write_sample(channel, sample): + assert channel in (0, 1) + if channel == 0: + addresses = [CH0_HIGH_WORD_ADDR, CH0_LOW_WORD_ADDR] + else: + addresses = [CH1_HIGH_WORD_ADDR, CH1_LOW_WORD_ADDR] + + low_word_value = sample & 0xFF + high_word_value = (sample >> 8) & 0x3F + values = [high_word_value, low_word_value] + for addr, value in zip(addresses, values): + write_to_memory(addr, value) + + +def write_ramp(): + signal = [i for i in range(16384)] + + for value in signal: + write_sample(0, value) + +def main(): + main_dac_init() + power_down(0, False) + power_down(1, False) + +if __name__ == "__main__": + main() \ No newline at end of file diff --git a/fast-servo/pyfastservo/fp_leds.py b/fast-servo/pyfastservo/fp_leds.py new file mode 100644 index 0000000..7bd2347 --- /dev/null +++ b/fast-servo/pyfastservo/fp_leds.py @@ -0,0 +1,66 @@ +# This file is part of Fast Servo Software Package. +# +# Copyright (C) 2023 Jakub Matyas +# Warsaw University of Technology +# SPDX-License-Identifier: GPL-3.0-or-later +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +import mmap +import os +import time + +from common import ( + LED0_BASE_ADDR, + LED1_BASE_ADDR, + LED2_BASE_ADDR, + LED3_BASE_ADDR, + MAP_MASK, + PAGESIZE, +) + +ON = 1 +OFF = 0 + + +def main(): + addrs = [LED0_BASE_ADDR, LED1_BASE_ADDR, LED2_BASE_ADDR, LED3_BASE_ADDR] + + f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR) + for addr in addrs: + with mmap.mmap( + f, + PAGESIZE, + mmap.MAP_SHARED, + mmap.PROT_READ | mmap.PROT_WRITE, + offset=addr & ~MAP_MASK, + ) as mem: + for i in range(6): + start_addr = addr & MAP_MASK + stop_addr = start_addr + 4 + print( + f"addr: 0x{addr:x}\tstart_addr: 0x{start_addr}\tstop_addr: 0x{stop_addr}" + ) + mem[start_addr:stop_addr] = ON.to_bytes(4, "little") + contents = mem[start_addr:stop_addr] + time.sleep(0.5) + mem[start_addr:stop_addr] = OFF.to_bytes(4, "little") + contents = mem[start_addr:stop_addr] + time.sleep(0.5) + + os.close(f) + + +if __name__ == "__main__": + main() diff --git a/fast-servo/pyfastservo/initialize.py b/fast-servo/pyfastservo/initialize.py new file mode 100644 index 0000000..12f9ca7 --- /dev/null +++ b/fast-servo/pyfastservo/initialize.py @@ -0,0 +1,30 @@ +# This file is part of Fast Servo Software Package. +# +# Copyright (C) 2023 Jakub Matyas +# Warsaw University of Technology +# SPDX-License-Identifier: GPL-3.0-or-later +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +import adc +import si5340 +import dac + +def main(): + si5340.configure_si5340() + adc.main() + dac.main() + +if __name__ == "__main__": + main() \ No newline at end of file diff --git a/fast-servo/pyfastservo/si5340.py b/fast-servo/pyfastservo/si5340.py new file mode 100644 index 0000000..bbb11d8 --- /dev/null +++ b/fast-servo/pyfastservo/si5340.py @@ -0,0 +1,118 @@ +# This file is part of Fast Servo Software Package. +# +# Copyright (C) 2023 Jakub Matyas +# Warsaw University of Technology +# SPDX-License-Identifier: GPL-3.0-or-later +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +from smbus2 import SMBus + +BUS_NO = 0 +IC_ADDR = 0x74 + +PAGE_ADDR = 0x1 + +OUT0_MUX_SEL_ADDR = 0x15 +OUT1_MUX_SEL_ADDR = 0x1A +OUT2_MUX_SEL_ADDR = 0x29 +OUT3_MUX_SEL_ADDR = 0x2E + +OUT2_AMPL_ADDR = 0x28 + +OUT3_PDN_ADDR = 0x2B +OUT3_FORMAT_ADDR = 0x2C +OUT3_AMPL_ADDR = 0x2D + + +N1_DIVIDER_UPDATE_ADDR = 0x17 + +data_to_write = 0 +clk_out_addr = [ + OUT0_MUX_SEL_ADDR, + OUT1_MUX_SEL_ADDR, + OUT2_MUX_SEL_ADDR, + OUT3_MUX_SEL_ADDR, +] + +def configure_si5340(): + with SMBus(BUS_NO) as bus: + + bus.write_byte_data(IC_ADDR, PAGE_ADDR, 0x0) # setting page to page 0 + + # read device id + low_word = bus.read_byte_data(IC_ADDR, 0x2) + high_word = bus.read_byte_data(IC_ADDR, 0x3) + + print(f"DEV ID: 0x{high_word:2x}{low_word:2x}") + + data_to_write = 0x1 + bus.write_byte_data( + IC_ADDR, PAGE_ADDR, data_to_write + ) # change to page 1 for output settings + + readback = bus.read_byte_data(IC_ADDR, PAGE_ADDR) + if data_to_write != readback: + raise ValueError(f"Failed to set page.") + + for addr in clk_out_addr: + bus.write_byte_data(IC_ADDR, addr, 1) # set source to N1 + + bus.write_byte_data(IC_ADDR, OUT2_AMPL_ADDR, 13) + readback = bus.read_byte_data(IC_ADDR, OUT2_AMPL_ADDR) + # if data_to_write != readback: + # raise ValueError(f"Problematic read: {readback}.") + + bus.write_byte_data(IC_ADDR, OUT2_AMPL_ADDR, 0x6B) # setting OUT2 to LVDS25 + + bus.write_byte_data(IC_ADDR, OUT3_FORMAT_ADDR, 0xCC) # SETTING out3 to LVCMOS 18 + # bus.write_byte_data(IC_ADDR, 0x2E, 0x09) # SETTING out3 to LVCMOS 33 + + readback = bus.read_byte_data(IC_ADDR, OUT3_PDN_ADDR) + print(f"Si5340 OUTx_PDN CLK3: 0x{readback}") + + readback = bus.read_byte_data(IC_ADDR, OUT3_FORMAT_ADDR) + print(f"Si5340 OUTx_FORMAT CLK3: 0x{readback}") + + readback = bus.read_byte_data(IC_ADDR, OUT3_AMPL_ADDR) + print(f"Si5340 OUTx_AMPL CLK3: 0x{readback}") + + readback = bus.read_byte_data(IC_ADDR, OUT3_MUX_SEL_ADDR) + print(f"Si5340 OUTx_CM CLK3: 0x{readback}") + + bus.write_byte_data( + IC_ADDR, PAGE_ADDR, 0x3 + ) # setting page to 3 to change dividers values + + n1_numerator = [0x0, 0x0, 0x0, 0x60, 0x22, 0x0] + n1_numerator_10M = [0x0, 0x0, 0x0, 0xC0, 0x57, 0x1] + n1_num_addr = [0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12] + n1_denom_addr = [0x13, 0x14, 0x15, 0x16] + for addr, value in zip(n1_num_addr, n1_numerator): + bus.write_byte_data(IC_ADDR, addr, value) + + bus.write_byte_data(IC_ADDR, N1_DIVIDER_UPDATE_ADDR, 1) + + for addr in n1_num_addr: + readback = bus.read_byte_data(IC_ADDR, addr) + print(f"Numerator buffer: 0x{readback:02x}") + + for addr in n1_denom_addr: + readback = bus.read_byte_data(IC_ADDR, addr) + print(f"Denominator buffer: 0x{readback:02x}") + + bus.write_byte_data(IC_ADDR, PAGE_ADDR, 0x0) # setting page to page 0 + +if __name__ == "__main__": + configure_si5340() \ No newline at end of file