pyfastservo: fix dac init script and cleanup
This commit is contained in:
parent
eed43e3fe3
commit
b92d401f2b
@ -17,8 +17,7 @@
|
|||||||
# You should have received a copy of the GNU General Public License
|
# You should have received a copy of the GNU General Public License
|
||||||
# along with this program. If not, see <https://www.gnu.org/licenses/>.
|
# along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
import mmap
|
import time
|
||||||
import os
|
|
||||||
|
|
||||||
import spidev
|
import spidev
|
||||||
from pyfastservo.common import (
|
from pyfastservo.common import (
|
||||||
@ -29,108 +28,58 @@ from pyfastservo.common import (
|
|||||||
CTRL_ADDR,
|
CTRL_ADDR,
|
||||||
MAP_MASK,
|
MAP_MASK,
|
||||||
PAGESIZE,
|
PAGESIZE,
|
||||||
|
write_to_memory,
|
||||||
|
read_from_memory
|
||||||
)
|
)
|
||||||
|
|
||||||
# /dev/spidev2.0 <=> spidev<BUS>.<DEVICE>
|
# /dev/spidev2.0 <=> spidev<BUS>.<DEVICE>
|
||||||
MAIN_DAC_BUS = 2
|
MAIN_DAC_BUS = 2
|
||||||
MAIN_DAC_DEVICE = 0
|
MAIN_DAC_DEVICE = 0
|
||||||
|
|
||||||
DAC_VERSION = 0x0A
|
DAC_VERSION = 0x0A
|
||||||
|
|
||||||
|
|
||||||
def main_dac_init():
|
def spi_write(spi, address, value):
|
||||||
spi = spidev.SpiDev()
|
spi.xfer2([address, value])
|
||||||
|
|
||||||
try:
|
def spi_read(spi, address):
|
||||||
spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE)
|
rx_buffer = spi.xfer2([0x80 | address, 0x00])
|
||||||
spi.max_speed_hz = 5000
|
return rx_buffer[1]
|
||||||
spi.mode = 0b00 # CPOL = 0 CPHA = 0
|
|
||||||
spi.cshigh = False
|
|
||||||
|
|
||||||
spi_buffer = [0x00, 0x10] # software reset
|
def hard_reset(spi):
|
||||||
spi.xfer2(spi_buffer)
|
spi_write(spi, 0x00, 0x10) # Software reset
|
||||||
|
spi_write(spi, 0x00, 0x00) # Release software reset
|
||||||
|
spi_read(spi, 0x00) # Read reset address (necessary for reset to take effect)
|
||||||
|
|
||||||
spi_buffer = [0x00, 0x00] # release software reset
|
def check_version(spi):
|
||||||
spi.xfer2(spi_buffer)
|
version = spi_read(spi, 0x1F)
|
||||||
|
print(f"DAC version: 0x{version:02X}")
|
||||||
|
return version == DAC_VERSION
|
||||||
|
|
||||||
spi_buffer = [
|
def configure_dac(spi):
|
||||||
0x80,
|
power_down_reg = spi_read(spi, 0x01)
|
||||||
0x00,
|
spi_write(spi, 0x01, power_down_reg & ~(1 << 0)) # Clear EXTREF bit for internal reference
|
||||||
] # for some reason it is needed to read the reset address for reset to actually reset
|
spi_write(spi, 0x0D, 0x00) # Set RREF to 10 kΩ for 1.0V reference
|
||||||
rx_buffer = spi.xfer2(spi_buffer)
|
spi_write(spi, 0x04, 0xA0) # Enable on-chip IRSET (1.6 kΩ for 20mA output)
|
||||||
|
spi_write(spi, 0x07, 0xA0) # Enable on-chip QRSET (1.6 kΩ for 20mA output)
|
||||||
|
spi_write(spi, 0x05, 0x00) # Disable internal IRCML
|
||||||
|
spi_write(spi, 0x08, 0x00) # Disable internal QRCML
|
||||||
|
spi_write(spi, 0x02, 0xB4) # Enable 2's complement, LVDS interface, 4 LVDS lanes
|
||||||
|
|
||||||
spi_buffer = [0x9F, 0x00] # hardware version
|
def dac_self_calibration(spi):
|
||||||
rx_buffer = spi.xfer2(spi_buffer)
|
spi_write(spi, 0x12, 0x00) # Reset calibration status
|
||||||
if rx_buffer[1] != DAC_VERSION:
|
spi_write(spi, 0x0E, 0x08) # Enable calibration clock, default divide ratio
|
||||||
print(f"Unrecognized device: 0x{rx_buffer[1]:02X}")
|
spi_write(spi, 0x0E, 0x38) # CALSELI = 1, CALSELQ = 1, CALCLK = 1
|
||||||
|
spi_write(spi, 0x12, 0x10) # Set CALEN bit
|
||||||
|
|
||||||
print("=== Contents of spi buffer after DAC VERSION read back: ===")
|
while True:
|
||||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
status = spi_read(spi, 0x0F)
|
||||||
|
if status & 0xC0 == 0xC0: # Both CALSTATI and CALSTATQ are 1
|
||||||
spi_buffer = [0x82, 00]
|
break
|
||||||
rx_buffer = spi.xfer2(spi_buffer)
|
time.sleep(0.01)
|
||||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
|
||||||
|
|
||||||
# set to 2's complement and I to be first of pair on data input pads
|
|
||||||
spi_buffer = [0x02, 0xB4]
|
|
||||||
rx_buffer = spi.xfer2(spi_buffer)
|
|
||||||
spi_buffer = [0x82, 00]
|
|
||||||
rx_buffer = spi.xfer2(spi_buffer)
|
|
||||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
|
||||||
|
|
||||||
for i in range(10):
|
|
||||||
spi_buffer = [0x94, 0x00]
|
|
||||||
rx_buffer = spi.xfer2(spi_buffer)
|
|
||||||
print(f"0x{rx_buffer[0]:02X}{rx_buffer[1]:02X}")
|
|
||||||
|
|
||||||
finally:
|
|
||||||
spi.close()
|
|
||||||
|
|
||||||
|
|
||||||
def read_from_memory(address, n_bytes):
|
|
||||||
assert n_bytes <= 4
|
|
||||||
addr = address
|
|
||||||
|
|
||||||
try:
|
|
||||||
f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR)
|
|
||||||
with mmap.mmap(
|
|
||||||
f,
|
|
||||||
PAGESIZE,
|
|
||||||
mmap.MAP_SHARED,
|
|
||||||
mmap.PROT_READ | mmap.PROT_WRITE,
|
|
||||||
offset=addr & ~MAP_MASK,
|
|
||||||
) as mem:
|
|
||||||
start_addr = addr & MAP_MASK
|
|
||||||
stop_addr = start_addr + 4
|
|
||||||
# print(f"addr: 0x{addr:x}\tstart_addr: 0x{start_addr}\tstop_addr: 0x{stop_addr}")
|
|
||||||
contents = mem[start_addr:stop_addr]
|
|
||||||
read_value = list(contents)[:n_bytes]
|
|
||||||
finally:
|
|
||||||
os.close(f)
|
|
||||||
|
|
||||||
return read_value
|
|
||||||
|
|
||||||
|
|
||||||
def write_to_memory(address, value):
|
|
||||||
value_bytes = value.to_bytes(4, "little")
|
|
||||||
addr = address
|
|
||||||
|
|
||||||
try:
|
|
||||||
f = os.open("/dev/mem", os.O_SYNC | os.O_RDWR)
|
|
||||||
with mmap.mmap(
|
|
||||||
f,
|
|
||||||
PAGESIZE,
|
|
||||||
mmap.MAP_SHARED,
|
|
||||||
mmap.PROT_READ | mmap.PROT_WRITE,
|
|
||||||
offset=addr & ~MAP_MASK,
|
|
||||||
) as mem:
|
|
||||||
start_addr = addr & MAP_MASK
|
|
||||||
stop_addr = start_addr + 4
|
|
||||||
mem[start_addr:stop_addr] = value_bytes
|
|
||||||
contents = mem[start_addr:stop_addr]
|
|
||||||
finally:
|
|
||||||
os.close(f)
|
|
||||||
|
|
||||||
|
spi_write(spi, 0x12, 0x00) # Clear calibration bits
|
||||||
|
spi_write(spi, 0x0E, 0x30) # Keep CALSELI and CALSELQ set, clear CALCLK
|
||||||
|
print("DAC self-calibration completed")
|
||||||
|
|
||||||
def manual_override(enable=True):
|
def manual_override(enable=True):
|
||||||
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
||||||
@ -138,7 +87,6 @@ def manual_override(enable=True):
|
|||||||
to_write = reg_contents | 0b1 if enable else reg_contents & 0b110
|
to_write = reg_contents | 0b1 if enable else reg_contents & 0b110
|
||||||
write_to_memory(CTRL_ADDR, to_write)
|
write_to_memory(CTRL_ADDR, to_write)
|
||||||
|
|
||||||
|
|
||||||
def power_down(channel, power_down=True):
|
def power_down(channel, power_down=True):
|
||||||
assert channel in (0, 1)
|
assert channel in (0, 1)
|
||||||
|
|
||||||
@ -152,31 +100,49 @@ def power_down(channel, power_down=True):
|
|||||||
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
reg_contents = read_from_memory(CTRL_ADDR, 1)[0]
|
||||||
print(f"REG contents: 0b{reg_contents:03b}")
|
print(f"REG contents: 0b{reg_contents:03b}")
|
||||||
|
|
||||||
|
def set_dac_output(value):
|
||||||
|
value = min(value, 0x3FFF)
|
||||||
|
low_word = value & 0xFF
|
||||||
|
high_word = (value >> 8) & 0x3F
|
||||||
|
|
||||||
def write_sample(channel, sample):
|
write_to_memory(CH0_HIGH_WORD_ADDR, high_word)
|
||||||
assert channel in (0, 1)
|
write_to_memory(CH0_LOW_WORD_ADDR, low_word)
|
||||||
if channel == 0:
|
write_to_memory(CH1_HIGH_WORD_ADDR, high_word)
|
||||||
addresses = [CH0_HIGH_WORD_ADDR, CH0_LOW_WORD_ADDR]
|
write_to_memory(CH1_LOW_WORD_ADDR, low_word)
|
||||||
else:
|
print(f"DAC output set to: 0x{value:04X}")
|
||||||
addresses = [CH1_HIGH_WORD_ADDR, CH1_LOW_WORD_ADDR]
|
|
||||||
|
|
||||||
low_word_value = sample & 0xFF
|
def configure_ad9117():
|
||||||
high_word_value = (sample >> 8) & 0x3F
|
spi = spidev.SpiDev()
|
||||||
values = [high_word_value, low_word_value]
|
spi.open(MAIN_DAC_BUS, MAIN_DAC_DEVICE)
|
||||||
for addr, value in zip(addresses, values):
|
spi.max_speed_hz = 5000
|
||||||
write_to_memory(addr, value)
|
spi.mode = 0b00 # CPOL = 0 CPHA = 0
|
||||||
|
spi.cshigh = False
|
||||||
|
|
||||||
|
try:
|
||||||
|
hard_reset(spi)
|
||||||
|
if not check_version(spi):
|
||||||
|
print("Unrecognized DAC version")
|
||||||
|
return False
|
||||||
|
|
||||||
def write_ramp():
|
configure_dac(spi)
|
||||||
signal = [i for i in range(16384)]
|
dac_self_calibration(spi)
|
||||||
|
|
||||||
for value in signal:
|
|
||||||
write_sample(0, value)
|
|
||||||
|
|
||||||
def main():
|
|
||||||
main_dac_init()
|
|
||||||
power_down(0, False)
|
power_down(0, False)
|
||||||
power_down(1, False)
|
power_down(1, False)
|
||||||
|
manual_override(True)
|
||||||
|
|
||||||
|
# Enable DAC outputs
|
||||||
|
spi_write(spi, 0x01, spi_read(spi, 0x01) & ~((1 << 4) | (1 << 3)))
|
||||||
|
|
||||||
|
print("AD9117 configuration completed successfully")
|
||||||
|
return True
|
||||||
|
|
||||||
|
except Exception as e:
|
||||||
|
print(f"Error configuring AD9117: {e}")
|
||||||
|
return False
|
||||||
|
|
||||||
|
finally:
|
||||||
|
spi.close()
|
||||||
|
|
||||||
if __name__ == "__main__":
|
if __name__ == "__main__":
|
||||||
main()
|
configure_ad9117()
|
Loading…
Reference in New Issue
Block a user