artiq-board-generated/artiq-board.nix

@@ -0,0 +1,97 @@
+# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
+#  nix.sandboxPaths = ["/opt"];
+
+{ pkgs ? import <nixpkgs> {}
+, artiq-fast
+}:
+
+let
+  artiqSrc = import (artiq-fast + "/pkgs/artiq-src.nix") { fetchgit = pkgs.fetchgit; };
+  artiqpkgs = import artiq-fast { inherit pkgs; };
+  pythonEnv = pkgs.python3.withPackages (ps: with ps; [
+    jinja2 jsonschema numpy artiqpkgs.migen artiqpkgs.microscope artiqpkgs.misoc artiqpkgs.jesd204b artiqpkgs.artiq
+  ]);
+  fetchcargo = import (artiq-fast + "/fetchcargo.nix") {
+    inherit (pkgs) stdenv cacert git;
+    inherit (artiqpkgs) cargo cargo-vendor;
+  };
+  cargoDeps = fetchcargo rec {
+    name = "artiq-firmware-cargo-deps";
+    src = "${artiqSrc}/artiq/firmware";
+    sha256 = import (artiqSrc + "/artiq/firmware/cargosha256.nix");
+  };
+
+  cargoVendored = pkgs.stdenv.mkDerivation {
+    name = "artiq-firmware-cargo-vendored";
+    src = cargoDeps;
+    phases = [ "unpackPhase" "installPhase" ];
+    installPhase =
+      ''
+      mkdir -p $out/registry
+      cat << EOF > $out/config
+        [source.crates-io]
+        registry = "https://github.com/rust-lang/crates.io-index"
+        replace-with = "vendored-sources"
+
+        [source."https://github.com/m-labs/libfringe"]
+        git = "https://github.com/m-labs/libfringe"
+        rev = "b8a6d8f"
+        replace-with = "vendored-sources"
+
+        [source.vendored-sources]
+        directory = "$out/registry"
+      EOF
+      cp -R * $out/registry
+      '';
+  };
+in
+{ target
+, variant
+, src ? null
+, buildCommand ? "python -m artiq.gateware.targets.${target} -V ${variant}"
+, extraInstallCommands ? ""
+, ...
+}:
+let
+  name = "artiq-board-${target}-${variant}-${artiqpkgs.artiq.version}-xxx";
+  installPath = "${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}";
+in
+# Board packages are Python modules so that they get added to the ARTIQ Python
+# environment, and artiq_flash finds them.
+pkgs.stdenv.mkDerivation {
+  name = "artiq-board-${target}-${variant}-${artiqpkgs.artiq.version}";
+  inherit src;
+  phases = [ "buildPhase" "installPhase" ];
+  nativeBuildInputs = [
+    pkgs.gnumake pkgs.which pythonEnv
+    artiqpkgs.cargo
+    artiqpkgs.rustc
+    artiqpkgs.binutils-or1k
+    artiqpkgs.llvm-or1k
+  ];
+  buildInputs = [ pythonEnv ];
+  buildPhase =
+    ''
+    export CARGO_HOME=${cargoVendored}
+    export TARGET_AR=or1k-linux-ar
+    ${buildCommand} --no-compile-gateware --gateware-identifier-str=unprogrammed
+    '';
+  installPhase =
+    ''
+    mkdir -p $out
+    cp -ar artiq_${target}/${variant}/gateware $out
+
+    TARGET_DIR=$out/${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}
+    mkdir -p $TARGET_DIR
+    if [ -e artiq_${target}/${variant}/software/bootloader/bootloader.bin ]
+    then cp artiq_${target}/${variant}/software/bootloader/bootloader.bin $TARGET_DIR
+    fi
+    if [ -e artiq_${target}/${variant}/software/runtime ]
+    then cp artiq_${target}/${variant}/software/runtime/runtime.{elf,fbi} $TARGET_DIR
+    else cp artiq_${target}/${variant}/software/satman/satman.{elf,fbi} $TARGET_DIR
+    fi
+    ${extraInstallCommands}
+    '';
+  # don't mangle ELF files as they are not for NixOS
+  dontFixup = true;
+}

artiq-board-generated/default.nix

@@ -0,0 +1,54 @@
+{ pkgs ? import <nixpkgs> {}
+, artiq-fast ? <artiq-fast>
+}:
+
+let
+  sinaraSystemsSrc = <sinaraSystemsSrc>;
+  generatedNix = pkgs.runCommand "generated-nix" { buildInputs = [ pkgs.nix pkgs.git ]; }
+    ''
+    mkdir $out
+    cp ${./artiq-board.nix} $out/artiq-board.nix
+    cp ${../artiq-full/artiq-targets.nix} $out/artiq-targets.nix
+    cp -a ${artiq-fast} $out/fast
+
+    REV=`git --git-dir ${sinaraSystemsSrc}/.git rev-parse HEAD`
+    echo -n $REV > $out/sinara-rev.txt
+    SINARA_SRC_CLEAN=`mktemp -d`
+    cp -a ${sinaraSystemsSrc}/. $SINARA_SRC_CLEAN
+    chmod -R 755 $SINARA_SRC_CLEAN/.git
+    chmod 755 $SINARA_SRC_CLEAN
+    rm -rf $SINARA_SRC_CLEAN/.git
+    HASH=`nix-hash --type sha256 --base32 $SINARA_SRC_CLEAN`
+    echo -n $HASH > $out/sinara-hash.txt
+
+    cat > $out/default.nix << EOF
+    { pkgs ? import <nixpkgs> {}
+    }:
+
+    let
+      sinaraSystemsSrc = pkgs.fetchgit {
+        url = "https://git.m-labs.hk/M-Labs/sinara-systems.git";
+        rev = "$REV";
+        sha256 = "$HASH";
+      };
+      artiq-fast = import ./fast { inherit pkgs; };
+      artiq-board = import ./artiq-board.nix {
+        inherit pkgs;
+        artiq-fast = ./fast;
+      };
+    in
+      builtins.mapAttrs (_: conf: pkgs.lib.hydraJob (artiq-board conf)) (
+        import ./artiq-targets.nix {
+          inherit pkgs sinaraSystemsSrc;
+          artiqVersion = artiq-fast.artiq.version;
+        }
+      )
+    EOF
+    '';
+  artiq-board-generated = import generatedNix {
+    inherit pkgs;
+  };
+in
+artiq-board-generated // {
+  generated-nix = pkgs.lib.hydraJob generatedNix;
+}

artiq-fast.nix

@@ -0,0 +1,111 @@
+let
+  pkgs = import <nixpkgs> {};
+  artiqSrc = <artiqSrc>;
+  generatedNix = pkgs.runCommand "generated-nix" { buildInputs = [ pkgs.nix pkgs.git ]; }
+    # keep in sync with artiq-fast/pkgs/artiq-version.nix
+    ''
+    cp --no-preserve=mode,ownership -R ${./artiq-fast} $out
+    REV=`git --git-dir ${artiqSrc}/.git rev-parse HEAD`
+    MAJOR_VERSION=`cat ${artiqSrc}/MAJOR_VERSION`
+    if [ -e ${artiqSrc}/BETA ]; then
+      SUFFIX=".beta"
+    else
+      SUFFIX=""
+    fi
+    COMMIT_COUNT=`git --git-dir ${artiqSrc}/.git rev-list --count HEAD`
+    TIMESTAMP=`git --git-dir ${artiqSrc}/.git log -1 --format=%ct`
+    ARTIQ_SRC_CLEAN=`mktemp -d`
+    cp -a ${artiqSrc}/. $ARTIQ_SRC_CLEAN
+    chmod -R 755 $ARTIQ_SRC_CLEAN/.git
+    chmod 755 $ARTIQ_SRC_CLEAN
+    rm -rf $ARTIQ_SRC_CLEAN/.git
+    HASH=`nix-hash --type sha256 --base32 $ARTIQ_SRC_CLEAN`
+    cat > $out/pkgs/artiq-src.nix << EOF
+    { fetchgit }:
+    fetchgit {
+      url = "git://github.com/m-labs/artiq.git";
+      rev = "$REV";
+      sha256 = "$HASH";
+    }
+    EOF
+    echo "{ stdenv, git, fetchgit }: \"$MAJOR_VERSION.$COMMIT_COUNT.`cut -c1-8 <<< $REV`$SUFFIX\"" > $out/pkgs/artiq-version.nix
+    echo "{ stdenv, git, fetchgit }: \"$TIMESTAMP\"" > $out/pkgs/artiq-timestamp.nix
+    '';
+  artiqpkgs = import "${generatedNix}/default.nix" { inherit pkgs; };
+  artiqVersion = import "${generatedNix}/pkgs/artiq-version.nix" (with pkgs; { inherit stdenv fetchgit git; });
+  windowsRunner = overrides:
+    import "${generatedNix}/windows/run-test.nix" ({
+      inherit pkgs artiqpkgs;
+    } // overrides);
+  jobs = (builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) artiqpkgs);
+in
+  jobs // {
+    generated-nix = pkgs.lib.hydraJob generatedNix;  # used by artiq-full
+    artiq-fast = pkgs.releaseTools.channel {
+      name = "artiq-fast";
+      src = generatedNix;
+      constituents = builtins.attrValues jobs;
+    };
+
+    windows-no-hardware-tests = pkgs.stdenv.mkDerivation {
+      name = "windows-no-hardware-tests";
+      phases = [ "buildPhase" ];
+      buildPhase = ''
+        ${windowsRunner { testCommand = "python -m unittest discover -v sipyco.test && python -m unittest discover -v artiq.test"; }}/bin/wfvm-run-windows-tests
+        touch $out
+      '';
+    };
+
+    extended-tests = pkgs.stdenv.mkDerivation {
+      name = "extended-tests";
+
+      # requires patched Nix
+      __networked = true;
+
+      buildInputs = [
+        (pkgs.python3.withPackages(ps: [ ps.paramiko artiqpkgs.artiq artiqpkgs.artiq-board-kc705-nist_clock ]))
+        artiqpkgs.binutils-or1k
+        artiqpkgs.openocd
+        pkgs.openssh
+      ];
+      phases = [ "buildPhase" ];
+      buildPhase =
+      ''
+      export HOME=`mktemp -d`
+      mkdir $HOME/.ssh
+      cp /opt/hydra_id_rsa $HOME/.ssh/id_rsa
+      cp /opt/hydra_id_rsa.pub $HOME/.ssh/id_rsa.pub
+      echo "rpi-1 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMc7waNkP2HjL5Eo94evoxJhC8CbYj4i2n1THe5TPIR3" > $HOME/.ssh/known_hosts
+      chmod 600 $HOME/.ssh/id_rsa
+      LOCKCTL=$(mktemp -d)
+      mkfifo $LOCKCTL/lockctl
+
+      cat $LOCKCTL/lockctl | ${pkgs.openssh}/bin/ssh \
+        -i $HOME/.ssh/id_rsa \
+        -o UserKnownHostsFile=$HOME/.ssh/known_hosts \
+        sb@rpi-1 \
+        'mkdir -p /tmp/board_lock && flock /tmp/board_lock/kc705-1 -c "echo Ok; cat"' \
+      | (
+        # End remote flock via FIFO
+        atexit_unlock() {
+          echo > $LOCKCTL/lockctl
+        }
+        trap atexit_unlock EXIT
+
+        # Read "Ok" line when remote successfully locked
+        read LOCK_OK
+
+        artiq_flash -t kc705 -H rpi-1
+        sleep 15
+
+        export ARTIQ_ROOT=`python -c "import artiq; print(artiq.__path__[0])"`/examples/kc705_nist_clock
+        export ARTIQ_LOW_LATENCY=1
+        python -m unittest discover -v artiq.test.coredevice
+
+        ${windowsRunner { testCommand = "set ARTIQ_ROOT=%cd%\\Anaconda3\\envs\\artiq-env\\Lib\\site-packages\\artiq\\examples\\kc705_nist_clock&& python -m unittest discover -v artiq.test.coredevice"; }}/bin/wfvm-run-windows-tests
+      )
+
+      touch $out
+      '';
+    };
+  }

artiq-fast/artiq-board.nix

@@ -0,0 +1,102 @@
+# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
+#  nix.sandboxPaths = ["/opt"];
+
+{ pkgs
+, vivado ? import ./vivado.nix { inherit pkgs; }
+}:
+
+let
+  artiqSrc = import ./pkgs/artiq-src.nix { fetchgit = pkgs.fetchgit; };
+  artiqpkgs = import ./default.nix { inherit pkgs; };
+  fetchcargo = import ./fetchcargo.nix {
+    inherit (pkgs) stdenv cacert git;
+    inherit (artiqpkgs) cargo cargo-vendor;
+  };
+  cargoDeps = fetchcargo rec {
+    name = "artiq-firmware-cargo-deps";
+    src = "${artiqSrc}/artiq/firmware";
+    sha256 = (import "${artiqSrc}/artiq/firmware/cargosha256.nix");
+  };
+
+  cargoVendored = pkgs.stdenv.mkDerivation {
+    name = "artiq-firmware-cargo-vendored";
+    src = cargoDeps;
+    phases = [ "unpackPhase" "installPhase" ];
+    installPhase =
+      ''
+      mkdir -p $out/registry
+      cat << EOF > $out/config
+        [source.crates-io]
+        registry = "https://github.com/rust-lang/crates.io-index"
+        replace-with = "vendored-sources"
+
+        [source."https://github.com/m-labs/libfringe"]
+        git = "https://github.com/m-labs/libfringe"
+        rev = "b8a6d8f"
+        replace-with = "vendored-sources"
+
+        [source.vendored-sources]
+        directory = "$out/registry"
+      EOF
+      cp -R * $out/registry
+      '';
+  };
+
+in
+{ target
+, variant
+, src ? null
+, buildCommand ? "python -m artiq.gateware.targets.${target} -V ${variant}"
+, extraInstallCommands ? ""
+, ... }:
+
+# Board packages are Python modules so that they get added to the ARTIQ Python
+# environment, and artiq_flash finds them.
+pkgs.python3Packages.toPythonModule (pkgs.stdenv.mkDerivation rec {
+  name = "artiq-board-${target}-${variant}-${version}";
+  version = import ./pkgs/artiq-version.nix (with pkgs; { inherit stdenv fetchgit git; });
+  inherit src;
+  phases = [ "buildPhase" "installCheckPhase" "installPhase" "checkPhase" ];
+  nativeBuildInputs = [
+    vivado
+    pkgs.gnumake
+    artiqpkgs.cargo
+    artiqpkgs.rustc
+    artiqpkgs.binutils-or1k
+    artiqpkgs.llvm-or1k
+  ];
+  buildInputs = [ (pkgs.python3.withPackages(ps: with ps; [ jinja2 numpy artiqpkgs.migen artiqpkgs.microscope artiqpkgs.misoc artiqpkgs.jesd204b artiqpkgs.artiq ])) ];
+  buildPhase = 
+    ''
+    export CARGO_HOME=${cargoVendored}
+    export TARGET_AR=or1k-linux-ar
+    ${buildCommand}
+    '';
+  # temporarily disabled because there is currently always at least one Kasli bitstream
+  # that fails timing and blocks the conda channel.
+  doCheck = false;
+  checkPhase = ''
+    # Search for PCREs in the Vivado output to check for errors
+    check_log() {
+      grep -Pe "$1" artiq_${target}/${variant}/gateware/vivado.log && exit 1 || true
+    }
+    check_log "\d+ constraint not met\."
+    check_log "Timing constraints are not met\."
+    '';
+  installPhase =
+    ''
+    TARGET_DIR=$out/${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}
+    mkdir -p $TARGET_DIR
+    cp artiq_${target}/${variant}/gateware/top.bit $TARGET_DIR
+    if [ -e artiq_${target}/${variant}/software/bootloader/bootloader.bin ]
+    then cp artiq_${target}/${variant}/software/bootloader/bootloader.bin $TARGET_DIR
+    fi
+    if [ -e artiq_${target}/${variant}/software/runtime ]
+    then cp artiq_${target}/${variant}/software/runtime/runtime.{elf,fbi} $TARGET_DIR
+    else cp artiq_${target}/${variant}/software/satman/satman.{elf,fbi} $TARGET_DIR
+    fi
+    ${extraInstallCommands}
+    '';
+  # don't mangle ELF files as they are not for NixOS
+  dontFixup = true;
+})

artiq-fast/conda-windows/binutils-hack-libiconv.patch

@@ -0,0 +1,11 @@
+--- a/intl/relocatable.c	2018-02-28 18:19:46.318224392 +0000
++++ b/intl/relocatable.c	2018-02-28 18:19:37.614224749 +0000
+@@ -145,7 +145,7 @@
+   libcharset_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+ #endif
+ #if DEPENDS_ON_LIBICONV && HAVE_ICONV && _LIBICONV_VERSION >= 0x0109
+-  libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
++  // libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+ #endif
+ #if DEPENDS_ON_LIBINTL && ENABLE_NLS && defined libintl_set_relocation_prefix
+   libintl_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);

artiq-fast/conda-windows/binutils-recipe/bld.bat

@@ -0,0 +1,21 @@
+set MSYS=C:\MSYS64
+set TRIPLE=x86_64-w64-mingw32
+set PATH=%MSYS%\usr\bin;%MSYS%\mingw64\bin;%PATH%
+
+mkdir build
+cd build
+set CFLAGS=-I%PREFIX:\=/%/Library/include/
+set LDFLAGS=-L%PREFIX:\=/%/Library/lib/
+sh ../configure --build=%TRIPLE% ^
+  --prefix="%PREFIX:\=/%/Library" ^
+  --target=##TARGET##
+if errorlevel 1 exit 1
+
+make -j4
+if errorlevel 1 exit 1
+
+make install
+if errorlevel 1 exit 1
+
+rem this is a copy of prefixed executables
+rmdir /S /Q %PREFIX%\Library\##TARGET##

artiq-fast/conda-windows/binutils-recipe/meta.yaml

@@ -0,0 +1,17 @@
+package:
+  name: binutils-##TARGET##
+  version: ##VERSION##
+
+source:
+  url: ../src.tar.bz2
+
+requirements:
+  build:
+    - libiconv
+  run:
+    - libiconv
+
+about:
+  home: https://www.gnu.org/software/binutils/
+  license: GPL
+  summary: 'A set of programming tools for creating and managing binary programs, object files, libraries, profile data, and assembly source code.'

artiq-fast/conda-windows/binutils.nix

@@ -0,0 +1,54 @@
+{ pkgs, version, src, target }:
+
+let
+  wfvm = import ../wfvm.nix { inherit pkgs; };
+  libiconv-filename = "libiconv-1.15-h1df5818_7.tar.bz2";
+  libiconv = pkgs.fetchurl {
+    url = "https://anaconda.org/anaconda/libiconv/1.15/download/win-64/${libiconv-filename}";
+    sha256 = "0p431madykrjmi9sbl2sy9kzb0l3vhgs677i8q7cx8g210ab5g52";
+  };
+  vc14-filename = "vc-14.1-h0510ff6_4.tar.bz2";
+  vc14 = pkgs.fetchurl {
+    url = "https://anaconda.org/anaconda/vc/14.1/download/win-64/${vc14-filename}";
+    sha256 = "0nsyxph667x8ky1nybakpnk816dkrzbf1684jd7pp6wm5x73p34v";
+  };
+  vs2015_runtime-filename = "vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
+  vs2015_runtime = pkgs.fetchurl {
+    url = "https://anaconda.org/anaconda/vs2015_runtime/14.16.27012/download/win-64/${vs2015_runtime-filename}";
+    sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
+  };
+  build = wfvm.utils.wfvm-run {
+    name = "build-binutils";
+    image = wfvm.makeWindowsImage { installCommands = with wfvm.layers; [ anaconda3 msys2 (msys2-packages (import ./msys_packages.nix { inherit pkgs; } )) ]; };
+    script = ''
+      # Create a fake channel to work around another pile of bugs and cretinous design decisions from conda.
+      ${wfvm.utils.win-exec}/bin/win-exec "mkdir fake-channel && mkdir fake-channel\win-64"
+      ln -s ${libiconv} ${libiconv-filename}
+      ${wfvm.utils.win-put}/bin/win-put ${libiconv-filename} ./fake-channel/win-64
+      ln -s ${vc14} ${vc14-filename}
+      ${wfvm.utils.win-put}/bin/win-put ${vc14-filename} ./fake-channel/win-64
+      ln -s ${vs2015_runtime} ${vs2015_runtime-filename}
+      ${wfvm.utils.win-put}/bin/win-put ${vs2015_runtime-filename} ./fake-channel/win-64
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
+
+      cp --no-preserve=mode,ownership -R ${./binutils-recipe} binutils
+      sed -i s/##TARGET##/${target}/g binutils/*
+      sed -i s/##VERSION##/${version}/g binutils/*
+      ${wfvm.utils.win-put}/bin/win-put binutils .
+      tar xjf ${src}
+      patch -d binutils-${version} -p1 < ${./binutils-hack-libiconv.patch}
+      tar cjf src.tar.bz2 binutils-${version}
+      ${wfvm.utils.win-put}/bin/win-put src.tar.bz2 .
+
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda build --no-anaconda-upload --no-test -c file:///C:/users/wfvm/fake-channel --override-channels binutils"
+
+      ${wfvm.utils.win-get}/bin/win-get "Anaconda3/conda-bld/win-64/binutils-${target}-${version}-0.tar.bz2"
+    '';
+  };
+in
+  pkgs.runCommand "conda-windows-binutils-${target}" { buildInputs = [ build ]; } ''
+    wfvm-run-build-binutils
+    mkdir -p $out/win-64 $out/nix-support
+    cp binutils-*.tar.bz2 $out/win-64
+    echo file conda $out/win-64/*.tar.bz2 >> $out/nix-support/hydra-build-products
+    ''

artiq-fast/conda-windows/llvm-or1k.nix

@@ -0,0 +1,83 @@
+{ pkgs, version, src }:
+
+let
+  wfvm = import ../wfvm.nix { inherit pkgs; };
+  conda-vs2015_runtime-filename = "vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
+  conda-vs2015_runtime = pkgs.fetchurl {
+    url = "https://anaconda.org/anaconda/vs2015_runtime/14.16.27012/download/win-64/${conda-vs2015_runtime-filename}";
+    sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
+  };
+  conda-cmake-filename = "cmake-3.17.2-h33f27b4_0.tar.bz2";
+  conda-cmake = pkgs.fetchurl {
+    url = "https://anaconda.org/anaconda/cmake/3.17.2/download/win-64/${conda-cmake-filename}";
+    sha256 = "0lg782pj2i9h20rwfkwwskis038r98b3z4c9j1a6ih95rc6m2acn";
+  };
+  build = wfvm.utils.wfvm-run {
+    name = "build-llvm-or1k";
+    image = wfvm.makeWindowsImage { installCommands = with wfvm.layers; [ anaconda3 msvc msvc-ide-unbreak ]; };
+    script = ''
+      # Create a fake channel so that the conda garbage doesn't complain about not finding the packages it just installed.
+      ln -s ${conda-vs2015_runtime} ${conda-vs2015_runtime-filename}
+      ln -s ${conda-cmake} ${conda-cmake-filename}
+      ${wfvm.utils.win-exec}/bin/win-exec "mkdir fake-channel && mkdir fake-channel\win-64"
+      ${wfvm.utils.win-put}/bin/win-put ${conda-vs2015_runtime-filename} ./fake-channel/win-64
+      ${wfvm.utils.win-put}/bin/win-put ${conda-cmake-filename} ./fake-channel/win-64
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
+
+      cat > meta.yaml << EOF
+      package:
+        name: llvm-or1k
+        version: ${version}
+
+      source:
+        url: ../src.tar
+
+      requirements:
+        build:
+          - cmake
+      EOF
+
+      cat > bld.bat << EOF
+      set BUILD_TYPE=Release
+      set CMAKE_GENERATOR=Visual Studio 15 2017 Win64
+
+      mkdir build
+      cd build
+      cmake .. -G "%CMAKE_GENERATOR%" ^
+        -Thost=x64 ^
+        -DCMAKE_BUILD_TYPE="%BUILD_TYPE%" ^
+        -DCMAKE_INSTALL_PREFIX="%LIBRARY_PREFIX%" ^
+        -DLLVM_BUILD_LLVM_DYLIB=ON ^
+        -DLLVM_TARGETS_TO_BUILD=X86;ARM ^
+        -DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=OR1K ^
+        -DLLVM_ENABLE_ASSERTIONS=OFF ^
+        -DLLVM_INSTALL_UTILS=ON ^
+        -DLLVM_INCLUDE_TESTS=OFF ^
+        -DLLVM_INCLUDE_DOCS=OFF ^
+        -DLLVM_INCLUDE_EXAMPLES=OFF
+      if errorlevel 1 exit 1
+      cmake --build . --config "%BUILD_TYPE%" --parallel 4
+      if errorlevel 1 exit 1
+      cmake --build . --config "%BUILD_TYPE%" --target install
+      if errorlevel 1 exit 1
+      EOF
+
+      ${wfvm.utils.win-exec}/bin/win-exec "mkdir llvm-or1k"
+      ${wfvm.utils.win-put}/bin/win-put meta.yaml llvm-or1k
+      ${wfvm.utils.win-put}/bin/win-put bld.bat llvm-or1k
+      ln -s ${src} src
+      tar chf src.tar src
+      ${wfvm.utils.win-put}/bin/win-put src.tar .
+
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda build --no-anaconda-upload --no-test -c file:///C:/users/wfvm/fake-channel --override-channels llvm-or1k"
+
+      ${wfvm.utils.win-get}/bin/win-get "Anaconda3/conda-bld/win-64/llvm-or1k-${version}-0.tar.bz2"
+    '';
+  };
+in
+  pkgs.runCommand "conda-windows-llvm-or1k" { buildInputs = [ build ]; } ''
+    wfvm-run-build-llvm-or1k
+    mkdir -p $out/win-64 $out/nix-support
+    cp llvm-or1k-*.tar.bz2 $out/win-64
+    echo file conda $out/win-64/*.tar.bz2 >> $out/nix-support/hydra-build-products
+    ''

artiq-fast/conda-windows/llvmlite-artiq.nix

@@ -0,0 +1,74 @@
+{ pkgs, conda-windows-llvm-or1k, version, src }:
+
+let
+  wfvm = import ../wfvm.nix { inherit pkgs; };
+  conda-vs2015_runtime-filename = "vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
+  conda-vs2015_runtime = pkgs.fetchurl {
+    url = "https://anaconda.org/anaconda/vs2015_runtime/14.16.27012/download/win-64/${conda-vs2015_runtime-filename}";
+    sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
+  };
+  conda-cmake-filename = "cmake-3.17.2-h33f27b4_0.tar.bz2";
+  conda-cmake = pkgs.fetchurl {
+    url = "https://anaconda.org/anaconda/cmake/3.17.2/download/win-64/${conda-cmake-filename}";
+    sha256 = "0lg782pj2i9h20rwfkwwskis038r98b3z4c9j1a6ih95rc6m2acn";
+  };
+  build = wfvm.utils.wfvm-run {
+    name = "build-llvmlite-artiq";
+    image = wfvm.makeWindowsImage { installCommands = with wfvm.layers; [ anaconda3 msvc msvc-ide-unbreak ]; };
+    script = ''
+      ln -s ${conda-vs2015_runtime} ${conda-vs2015_runtime-filename}
+      ln -s ${conda-cmake} ${conda-cmake-filename}
+      ${wfvm.utils.win-exec}/bin/win-exec "mkdir fake-channel && mkdir fake-channel\win-64"
+      ${wfvm.utils.win-put}/bin/win-put ${conda-vs2015_runtime-filename} ./fake-channel/win-64
+      ${wfvm.utils.win-put}/bin/win-put ${conda-cmake-filename} ./fake-channel/win-64
+      ${wfvm.utils.win-put}/bin/win-put ${conda-windows-llvm-or1k}/win-64/llvm-or1k-*.tar.bz2 ./fake-channel/win-64
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
+
+      cat > meta.yaml << EOF
+      package:
+        name: llvmlite-artiq
+        version: ${version}
+
+      source:
+        url: ../src.tar
+
+      requirements:
+        build:
+          - cmake
+          - llvm-or1k
+      EOF
+
+      cat > bld.bat << EOF
+      @rem Let CMake know about the LLVM install path, for find_package()
+      set CMAKE_PREFIX_PATH=%LIBRARY_PREFIX%
+
+      @rem Ensure there are no build leftovers (CMake can complain)
+      if exist ffi\build rmdir /S /Q ffi\build
+
+      python setup.py install \
+        --prefix=%PREFIX% \
+        --single-version-externally-managed \
+        --record=record.txt \
+        --no-compile
+      if errorlevel 1 exit 1
+      EOF
+
+      ${wfvm.utils.win-exec}/bin/win-exec "mkdir llvmlite-artiq"
+      ${wfvm.utils.win-put}/bin/win-put meta.yaml llvmlite-artiq
+      ${wfvm.utils.win-put}/bin/win-put bld.bat llvmlite-artiq
+      ln -s ${src} src
+      tar chf src.tar src
+      ${wfvm.utils.win-put}/bin/win-put src.tar .
+
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda build --no-anaconda-upload --no-test -c file:///C:/users/wfvm/fake-channel --override-channels llvmlite-artiq"
+
+      ${wfvm.utils.win-get}/bin/win-get "Anaconda3/conda-bld/win-64/llvmlite-artiq-${version}-0.tar.bz2"
+    '';
+  };
+in
+  pkgs.runCommand "conda-windows-llvmlite-artiq" { buildInputs = [ build ]; } ''
+    wfvm-run-build-llvmlite-artiq
+    mkdir -p $out/win-64 $out/nix-support
+    cp llvmlite-artiq-*.tar.bz2 $out/win-64
+    echo file conda $out/win-64/*.tar.bz2 >> $out/nix-support/hydra-build-products
+    ''

artiq-fast/conda-windows/msys_packages.nix

@@ -0,0 +1,177 @@
+{ pkgs } : [
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-libiconv-1.16-1-any.pkg.tar.xz";
+  sha256 = "0w8jkjr5gwybw9469216vs6vpibkq36wx47bbl4r0smi4wvh2yxk";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-zlib-1.2.11-7-any.pkg.tar.xz";
+  sha256 = "1hnfagn5m0ys4f8349d8dpbqvh9p900jjn83r7fi1az6i9dz1v0x";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-binutils-2.34-3-any.pkg.tar.zst";
+  sha256 = "0ahlwbg5ir89nbra407yrzsplib4cia9m0dggcqjw1i4bxi7ypj1";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-headers-git-8.0.0.5905.066f1b3c-1-any.pkg.tar.zst";
+  sha256 = "0sskg0vvgggs932i09ipm5rrllv6vdf1ai3d3fvbi5pxis1xc9g0";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-crt-git-8.0.0.5905.066f1b3c-1-any.pkg.tar.zst";
+  sha256 = "1sjizkvknivbjs962fqxcmjkgnrvhd1frq96cfj2fyzk5cz7kfx0";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-isl-0.22.1-1-any.pkg.tar.xz";
+  sha256 = "1nj7sj3hgxhziqs1l7k42ginl10w7iy1b753mwvqiczfs322hb90";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-gmp-6.2.0-1-any.pkg.tar.xz";
+  sha256 = "1l4qdxr8xp6xyxabwcf9b876db3rhj4v54zsvb4v1kwm3jrs7caw";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-mpfr-4.0.2-2-any.pkg.tar.xz";
+  sha256 = "0hriryx58bkk3sihnhd4i6966civ3hq8i68rnc9kjivk47wi49rj";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-mpc-1.1.0-1-any.pkg.tar.xz";
+  sha256 = "0x1kg178l6mf9ivdy71bci36h2a37vypg4jk3k7y31ks6i79zifp";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-libwinpthread-git-8.0.0.5906.c9a21571-1-any.pkg.tar.zst";
+  sha256 = "16aqi04drn252cxdh1brpbi4syn4bfjb84qk4xqbnffnpxpvv5ph";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-gcc-libs-10.1.0-3-any.pkg.tar.zst";
+  sha256 = "0bmkrb9x7z0azzxl3z08r6chcl0pbnaijar7cdjxb2nh7fbbdzzp";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-windows-default-manifest-6.4-3-any.pkg.tar.xz";
+  sha256 = "1kwxb3q2slgsg17lkd0dc9fjks5f205dgm79fj0xq0zmrsns83kc";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-winpthreads-git-8.0.0.5906.c9a21571-1-any.pkg.tar.zst";
+  sha256 = "17nq8gs1nnxgligdrp5n6h4pnk46xw0yhjk2hn6y12vvpn7iv05v";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-zstd-1.4.5-1-any.pkg.tar.zst";
+  sha256 = "1jfxzajmbvlap1c0v17s8dzwdx0fi8kyrkmgr6gw1snisgllifyh";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-gcc-10.1.0-3-any.pkg.tar.zst";
+  sha256 = "1gkcc6hh20glx4b96ldsnd70r8dbp460bxfznm9z2rwgr0mxb374";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/make-4.3-1-x86_64.pkg.tar.xz";
+  sha256 = "0bmgggw56gkx7dcd8simpi2lhgz98limikx8wm0cb8cn7awi9w82";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/m4-1.4.18-2-x86_64.pkg.tar.xz";
+  sha256 = "05x7myqwwxk3vfqmliwk5pfn0w04fnjh1sqafsynpb9hx0c563ji";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/diffutils-3.7-1-x86_64.pkg.tar.xz";
+  sha256 = "11qdxn4mr8a96palhp5jkam904fh77bsw5v7mslhnzag4cg3kybx";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/autoconf-2.69-5-any.pkg.tar.xz";
+  sha256 = "1fxvgbjnmmb7dvmssfxkiw151dfd1wzj04hf45zklmzs4h2kkwda";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.6-1.6.3-2-any.pkg.tar.xz";
+  sha256 = "0if4wrr1vm2f1zjjh6dpln97xc1l1052bcawzmndwfh561cfxqb6";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.7-1.7.9-2-any.pkg.tar.xz";
+  sha256 = "1mjhp1k4c0xm8hfm3yckqvfb4ablzgg8a87l7wxaq1mmmskjmhpq";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.8-1.8.5-3-any.pkg.tar.xz";
+  sha256 = "046bzr44ss0lglx9lzccj9li74arz632hyvz6l9fcp98dndr3qjk";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.9-1.9.6-2-any.pkg.tar.xz";
+  sha256 = "0bh0dldmrd46xhix5358nj9sgf298n4ap0y8dsl6rvjsb5c0l5hd";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.10-1.10.3-3-any.pkg.tar.xz";
+  sha256 = "0p26lkx5n1mmmw1y98bgwzbxfxkfa18fqxvkgsm60fznjig4dq61";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.11-1.11.6-3-any.pkg.tar.xz";
+  sha256 = "1cjkav2bskf9rdm8g3hsl2l7wz1lx8dfigwqib0xhm7n8i8gc560";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.12-1.12.6-3-any.pkg.tar.xz";
+  sha256 = "1c0h2lngfjjfvw0jkrfah1fs25k0vdm80hlxfjs912almh2yg5gv";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.13-1.13.4-4-any.pkg.tar.xz";
+  sha256 = "0mczn8hanqn3hxr104klb832b4cnzn44bbn7lvqfsbvvjpklv9ld";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.14-1.14.1-3-any.pkg.tar.xz";
+  sha256 = "04gjyfszyphxy7qc1rr8378ms9hql0sy8a1gyj0mvpbmgb0phgkp";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.15-1.15.1-1-any.pkg.tar.xz";
+  sha256 = "00n1f3c6fwznpm1f6xmj30q41ixw5vdg52yg48yvr4jswb78qf8q";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake1.16-1.16.1-1-any.pkg.tar.xz";
+  sha256 = "1ds8rpagrlkzi28n5rh0jcibbic49xssl2hz6sy41my0vd8a3z9y";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/automake-wrapper-11-1-any.pkg.tar.xz";
+  sha256 = "1dzymv59wri7qqmgmy5xfkq6zvfcb0znwspc149a04d0bhxs75gw";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/libltdl-2.4.6-9-x86_64.pkg.tar.xz";
+  sha256 = "0j0xazjpj28dib9vjn3paibhry77k903rzvbkdn6gnl20smj18g2";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/tar-1.32-1-x86_64.pkg.tar.xz";
+  sha256 = "0ynz2qwzbcmixcxddp05q2wc7iqli6svzkrjss9izrpmbkv5ifa5";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/libtool-2.4.6-9-x86_64.pkg.tar.xz";
+  sha256 = "0mrnkayrhmrgq446nyysvj3kadqm1xhyl97qqv6hrq57lhkcry2p";
+})
+
+(pkgs.fetchurl {
+  url = "http://repo.msys2.org/msys/x86_64/texinfo-6.7-1-x86_64.pkg.tar.xz";
+  sha256 = "0c50809yg9g95m8yib867q8m28sjabqppz2qbzh3gr83z55kknnw";
+})
+]

artiq-fast/conda-windows/redistribute.nix

@@ -0,0 +1,13 @@
+{ pkgs, name, filename, baseurl, sha256 }:
+
+let
+  download = pkgs.fetchurl {
+  	url = "${baseurl}${filename}";
+  	inherit sha256;
+  };
+in
+  pkgs.runCommand "conda-windows-${name}" { } ''
+    mkdir -p $out/win-64 $out/nix-support
+    ln -s ${download} $out/win-64/${filename}
+    echo file conda $out/win-64/${filename} >> $out/nix-support/hydra-build-products
+    ''

artiq-fast/conda/artiq.nix

@@ -0,0 +1,38 @@
+{ pkgs }:
+
+let
+  version = import ../pkgs/artiq-version.nix (with pkgs; { inherit stdenv fetchgit git; });
+  fakeCondaSource = import ./fake-source.nix { inherit pkgs; } {
+    name = "artiq";
+    inherit version;
+    src = import ../pkgs/artiq-src.nix { fetchgit = pkgs.fetchgit; };
+    dependencies = [
+      "llvmlite-artiq"
+      "binutils-or1k-linux"
+      "pythonparser"
+      "scipy"
+      "numpy"
+      "prettytable"
+      "h5py"
+      "python-dateutil"
+      "pyqt"
+      (if (pkgs.lib.strings.versionAtLeast version "6.0") then "qasync" else "quamash")
+      "pyqtgraph"
+      "pygit2"
+      "python-levenshtein"
+      "sipyco"
+    ];
+    extraYaml =
+    ''
+    about:
+      home: https://m-labs.hk/artiq
+      license: LGPL
+      summary: 'A leading-edge control system for quantum information experiments'
+    '';
+  };
+  conda-artiq = import ./build.nix { inherit pkgs; } {
+    name = "conda-artiq";
+    src = fakeCondaSource;
+  };
+in
+  conda-artiq

artiq-fast/conda/binutils.nix

@@ -0,0 +1,45 @@
+{ pkgs, version, src, target }:
+
+let
+  fake-src = pkgs.runCommand "conda-fake-source-binutils-${target}" { }
+    ''
+    mkdir -p $out/fake-conda;
+
+    cat << EOF > $out/fake-conda/meta.yaml
+    package:
+      name: binutils-${target}
+      version: ${version}
+
+    source:
+      url: ${src}
+
+    # Note: libiconv is also a build dependency, but the conda garbage won't find it
+    # if installed from a file (even if it shows up in conda list), as is the case 
+    # when using this script.
+    requirements:
+      run:
+        - libiconv
+
+    EOF
+
+    cat << EOF > $out/fake-conda/build.sh
+    #!/bin/bash
+    set -e
+
+    mkdir build
+    cd build
+    ../configure --target=${target} --prefix=\$PREFIX
+    make
+    make install
+
+    # this is a copy of prefixed executables
+    rm -rf $PREFIX/${target}
+
+    EOF
+    chmod 755 $out/fake-conda/build.sh
+    '';
+in
+  import ./build.nix { inherit pkgs; } {
+    name = "conda-binutils-${target}";
+    src = fake-src;
+  }

artiq-fast/conda/bscan-spi-bitstreams.nix

@@ -0,0 +1,36 @@
+{ pkgs, bscan_spi_bitstreams }:
+
+let
+  src = pkgs.runCommand "conda-fake-source-bscan_spi_bitstreams" { }
+    ''
+    mkdir -p $out/fake-conda;
+
+    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
+    cp --no-preserve=mode,ownership -R ${bscan_spi_bitstreams} workaround-conda
+    pushd workaround-conda
+    tar cf $out/src.tar .
+    popd
+    rm -rf workaround-conda
+
+    cat << EOF > $out/fake-conda/meta.yaml
+    package:
+      name: bscan-spi-bitstreams
+      version: "0.10.0"
+
+    source:
+      url: ../src.tar
+
+    build:
+      noarch: generic
+      binary_relocation: false
+      script:
+        - "mkdir -p \$PREFIX/share/bscan-spi-bitstreams"
+        - "cp *.bit \$PREFIX/share/bscan-spi-bitstreams"
+
+    EOF
+    '';
+in
+  import ./build.nix { inherit pkgs; } {
+    name = "conda-bscan_spi_bitstreams";
+    inherit src;
+  }

artiq-fast/conda/build.nix

@@ -0,0 +1,30 @@
+# We need to pass the whole source to conda for the git variables to work.
+# recipe must be a string pointing to a path within the source.
+
+{ pkgs }:
+{ name ? null
+, src
+, pname ? null
+, version ? null
+, recipe ? "fake-conda"
+}:
+
+# Check that either name is specified or both pname & version are specified.
+assert (name == null) -> pname != null && version != null;
+assert (name != null) -> pname == null && version == null;
+let
+  condaBuilderEnv = import ./builder-env.nix { inherit pkgs; };
+  realName = if (name != null) then name else "${pname}-${version}";
+in pkgs.stdenv.mkDerivation {
+  name = realName;
+  inherit src;
+  buildCommand =
+    ''
+    HOME=`pwd`
+    mkdir $out
+    ${condaBuilderEnv}/bin/conda-builder-env -c "conda build --no-anaconda-upload --no-test --output-folder $out $src/${recipe}"
+
+    mkdir -p $out/nix-support
+    echo file conda $out/*/*.tar.bz2 >> $out/nix-support/hydra-build-products
+    '';
+}

artiq-fast/conda/builder-env.nix

@@ -0,0 +1,47 @@
+{ pkgs }:
+
+with pkgs;
+
+let
+  condaDeps = [ stdenv.cc xorg.libSM xorg.libICE xorg.libX11 xorg.libXau xorg.libXi xorg.libXrender libselinux libGL ];
+  # Use the full Anaconda distribution, which already contains conda-build and its many dependencies,
+  # so we don't have to manually deal with them.
+  condaInstaller = fetchurl {
+    url = "https://repo.anaconda.com/archive/Anaconda3-2019.03-Linux-x86_64.sh";
+    sha256 = "0fmpdd5876ylds98mydmv5klnwlzasa461k0l1f4vhbw96vm3j25";
+  };
+  condaSrcChmod = runCommand "conda-src-chmod" { } "mkdir $out; cp ${condaInstaller} $out/conda-installer.sh; chmod +x $out/conda-installer.sh";
+  condaInstallerEnv = buildFHSUserEnv {
+    name = "conda-installer-env";
+    targetPkgs = pkgs: ([ condaSrcChmod ] ++ condaDeps);
+  };
+
+  # for binutils
+  libiconv-filename = "libiconv-1.15-h516909a_1006.tar.bz2";
+  libiconv = pkgs.fetchurl {
+    url = "https://anaconda.org/conda-forge/libiconv/1.15/download/linux-64/${libiconv-filename}";
+    sha256 = "1y1g807881j95f9s6mjinf6b7mqa51vc9jf0v7cx8hn7xx4d10ik";
+  };
+
+  condaInstalled = runCommand "conda-installed" { }
+    ''
+    ${condaInstallerEnv}/bin/conda-installer-env -c "${condaSrcChmod}/conda-installer.sh -p $out -b"
+    substituteInPlace $out/lib/python3.7/site-packages/conda/gateways/disk/__init__.py \
+      --replace "os.chmod(path, 0o2775)" "pass"
+
+    # The conda garbage breaks if the package filename is prefixed with the Nix store hash.
+    # Symptom is "WARNING conda.core.prefix_data:_load_single_record(167): Ignoring malformed
+    # prefix record at: /nix/store/[...].json", and the package is not registered in the conda
+    # list, even though its files are installed.
+    ln -s ${libiconv} ${libiconv-filename}
+    ${condaInstallerEnv}/bin/conda-installer-env -c "$out/bin/conda install ${libiconv-filename}"
+    '';
+in
+  buildFHSUserEnv {
+    name = "conda-builder-env";
+    targetPkgs = pkgs: ([ condaInstalled ] ++ condaDeps ++ [
+        # for llvm-or1k
+        cmake
+      ]
+    );
+  }

artiq-fast/conda/fake-source.nix

@@ -0,0 +1,57 @@
+{ pkgs }:
+{ name, version, src, extraSrcCommands ? "", dependencies ? [], extraYaml ? ""}:
+pkgs.runCommand "conda-fake-source-${name}" { }
+    ''
+    mkdir -p $out/fake-conda;
+
+    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
+    cp --no-preserve=mode,ownership -R ${src} workaround-conda
+    pushd workaround-conda
+    ${extraSrcCommands}
+    tar cf $out/src.tar .
+    popd
+    rm -rf workaround-conda
+
+    cat << EOF > $out/fake-conda/meta.yaml
+    package:
+      name: ${name}
+      version: ${version}
+
+    source:
+      url: ../src.tar
+
+    {% set data = load_setup_py_data() %}
+
+    build:
+      noarch: python
+      entry_points:
+        # NOTE: conda-build cannot distinguish between console and gui scripts
+        {% for entry_point_type, entry_points in data.get("entry_points", dict()).items() -%}
+        {% for entry_point in entry_points -%}
+        - {{ entry_point }}
+        {% endfor %}
+        {% endfor %}
+      ignore_prefix_files: True
+
+    requirements:
+      run:
+    ${pkgs.lib.concatStringsSep "\n" (map (s: "    - ${s}") dependencies)}
+
+    ${extraYaml}
+    EOF
+
+    cat << EOF > $out/fake-conda/build.sh
+    #!/bin/bash
+    set -e
+
+    export VERSIONEER_OVERRIDE=${version}
+    export LD_LIBRARY_PATH=/lib
+    python setup.py install \
+      --prefix=\$PREFIX \
+      --single-version-externally-managed \
+      --record=record.txt \
+      --no-compile
+
+    EOF
+    chmod 755 $out/fake-conda/build.sh
+    ''

artiq-fast/conda/llvm-or1k.nix

@@ -0,0 +1,52 @@
+{ pkgs, version, src }:
+
+let
+  fake-src = pkgs.runCommand "conda-fake-source-llvm-or1k" { }
+    ''
+    mkdir -p $out/fake-conda;
+
+    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
+    cp --no-preserve=mode,ownership -R ${src} workaround-conda
+    pushd workaround-conda
+    tar cf $out/src.tar .
+    popd
+    rm -rf workaround-conda
+
+    cat << EOF > $out/fake-conda/meta.yaml
+    package:
+      name: llvm-or1k
+      version: ${version}
+
+    # Use the nixpkgs cmake to build, so we are less bothered by conda idiocy.
+
+    source:
+      url: ../src.tar
+
+    EOF
+
+    cat << EOF > $out/fake-conda/build.sh
+    mkdir build
+    cd build
+    cmake .. \$COMPILER32 \
+      -DCMAKE_BUILD_TYPE=Release \
+      -DCMAKE_INSTALL_PREFIX=\$PREFIX \
+      -DLLVM_BUILD_LLVM_DYLIB=ON \
+      -DLLVM_LINK_LLVM_DYLIB=ON \
+      -DLLVM_TARGETS_TO_BUILD=X86\;ARM \
+      -DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=OR1K \
+      -DLLVM_ENABLE_ASSERTIONS=OFF \
+      -DLLVM_INSTALL_UTILS=ON \
+      -DLLVM_INCLUDE_TESTS=OFF \
+      -DLLVM_INCLUDE_DOCS=OFF \
+      -DLLVM_INCLUDE_EXAMPLES=OFF
+    make -j2
+    make install
+
+    EOF
+    chmod 755 $out/fake-conda/build.sh
+    '';
+in
+  import ./build.nix { inherit pkgs; } {
+    name = "conda-llvm-or1k";
+    src = fake-src;
+  }

artiq-fast/conda/llvmlite-artiq.nix

@@ -0,0 +1,69 @@
+{ pkgs, conda-llvm-or1k, version, src }:
+
+let
+  condaBuilderEnv = import ./builder-env.nix { inherit pkgs; };
+  fake-src = pkgs.runCommand "conda-fake-source-llvmlite-artiq" { }
+    ''
+    mkdir -p $out/fake-conda;
+
+    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
+    cp --no-preserve=mode,ownership -R ${src} workaround-conda
+    pushd workaround-conda
+    tar cf $out/src.tar .
+    popd
+    rm -rf workaround-conda
+
+    cat << EOF > $out/fake-conda/meta.yaml
+    package:
+      name: llvmlite-artiq
+      version: ${version}
+
+    source:
+      url: ../src.tar
+
+    # Again, we don't specify build dependencies since the conda garbage mistakenly thinks
+    # that they are not there if they have been installed from files.
+    requirements:
+      run:
+        - python
+        - ncurses [linux]
+    EOF
+
+    cat << EOF > $out/fake-conda/build.sh
+    #!/bin/bash
+    set -e
+
+    export LD_LIBRARY_PATH=/lib
+    python setup.py install \
+      --prefix=\$PREFIX \
+      --single-version-externally-managed \
+      --record=record.txt \
+      --no-compile
+
+    EOF
+    chmod 755 $out/fake-conda/build.sh
+    '';
+in
+  pkgs.stdenv.mkDerivation {
+    name = "conda-llvmlite-artiq";
+    src = fake-src;
+    buildCommand =
+      ''
+      HOME=`pwd`
+      mkdir $out
+      cat << EOF > conda-commands.sh
+      set -e
+
+      conda create --prefix ./conda_tmp ${conda-llvm-or1k}/*/*.tar.bz2
+      conda init
+      source .bashrc
+      conda activate ./conda_tmp
+
+      conda build --no-anaconda-upload --no-test --output-folder $out $src/fake-conda
+      EOF
+      ${condaBuilderEnv}/bin/conda-builder-env conda-commands.sh
+
+      mkdir -p $out/nix-support
+      echo file conda $out/*/*.tar.bz2 >> $out/nix-support/hydra-build-products
+      '';
+  }

artiq-fast/default.nix

@@ -0,0 +1,163 @@
+{ pkgs ? import <nixpkgs> {}}:
+with pkgs;
+let
+  artiq6 = pkgs.lib.strings.versionAtLeast mainPackages.artiq.version "6.0";
+  pythonDeps = import ./pkgs/python-deps.nix { inherit (pkgs) stdenv fetchgit fetchFromGitHub python3Packages; misoc-new = artiq6; };
+
+  boards = [
+    { target = "kasli"; variant = "tester"; }
+    { target = "kc705"; variant = "nist_clock"; }
+  ];
+  boardPackages = pkgs.lib.lists.foldr (board: start:
+    let
+      boardBinaries = import ./artiq-board.nix { inherit pkgs; } {
+        target = board.target;
+        variant = board.variant;
+      };
+    in
+      start // {
+        "artiq-board-${board.target}-${board.variant}" = boardBinaries;
+      }) {} boards;
+
+  mainPackages = rec {
+    inherit (pythonDeps) sipyco asyncserial pythonparser pyqtgraph-qt5 artiq-netboot misoc migen microscope jesd204b migen-axi lit outputcheck qasync;
+    binutils-or1k = callPackage ./pkgs/binutils.nix { platform = "or1k"; target = "or1k-linux"; };
+    binutils-arm = callPackage ./pkgs/binutils.nix { platform = "arm"; target = "armv7-unknown-linux-gnueabihf"; };
+    llvm-or1k = callPackage ./pkgs/llvm-or1k.nix {};
+    rustc = callPackage ./pkgs/rust/rustc-with-crates.nix
+      ((stdenv.lib.optionalAttrs (stdenv.cc.isGNU && stdenv.hostPlatform.isi686) {
+         stdenv = overrideCC stdenv gcc6; # with gcc-7: undefined reference to `__divmoddi4'
+       }) //
+       { inherit llvm-or1k; });
+    cargo = callPackage ./pkgs/rust/cargo.nix { inherit rustc; };
+    cargo-vendor = callPackage ./pkgs/rust/cargo-vendor.nix {};
+    llvmlite-artiq = callPackage ./pkgs/llvmlite-artiq.nix { inherit llvm-or1k; };
+    libartiq-support = callPackage ./pkgs/libartiq-support.nix { inherit rustc; };
+    artiq = callPackage ./pkgs/artiq.nix { inherit pythonDeps binutils-or1k binutils-arm llvm-or1k llvmlite-artiq libartiq-support lit outputcheck; };
+    artiq-env = (pkgs.python3.withPackages(ps: [ artiq ])).overrideAttrs (oldAttrs: { name = "${pkgs.python3.name}-artiq-env-${artiq.version}"; });
+    openocd = callPackage ./pkgs/openocd.nix {};
+  };
+
+  condaNoarch = {
+    conda-pythonparser = import ./conda/build.nix { inherit pkgs; } {
+      pname = "conda-pythonparser";
+      inherit (pythonDeps.pythonparser) version;
+      src = import ./conda/fake-source.nix { inherit pkgs; } {
+        name = "pythonparser";
+        inherit (pythonDeps.pythonparser) version src;
+        extraSrcCommands = "patch -p1 < ${./pkgs/pythonparserver.patch}";
+        dependencies = ["regex"];
+      };
+    };
+    conda-sipyco = import ./conda/build.nix { inherit pkgs; } {
+      pname = "conda-sipyco";
+      inherit (pythonDeps.sipyco) version;
+      src = import ./conda/fake-source.nix { inherit pkgs; } {
+        name = "sipyco";
+        inherit (pythonDeps.sipyco) version src;
+        dependencies = ["numpy"];
+      };
+    };
+    conda-quamash = import ./conda/build.nix { inherit pkgs; } {
+      pname = "conda-quamash";
+      inherit (pkgs.python3Packages.quamash) version;
+      src = import ./conda/fake-source.nix { inherit pkgs; } {
+        name = "quamash";
+        inherit (pkgs.python3Packages.quamash) version src;
+      };
+     };
+    conda-qasync = import ./conda/build.nix { inherit pkgs; } {
+      pname = "conda-qasync";
+      inherit (pythonDeps.qasync) version;
+      src = import ./conda/fake-source.nix { inherit pkgs; } {
+        name = "qasync";
+        inherit (pythonDeps.qasync) version src;
+      };
+    };
+    conda-bscan-spi-bitstreams = import ./conda/bscan-spi-bitstreams.nix {
+      inherit pkgs;
+      inherit (mainPackages.openocd) bscan_spi_bitstreams;
+    };
+    conda-artiq = import ./conda/artiq.nix { inherit pkgs; };
+    conda-asyncserial = import ./conda/build.nix { inherit pkgs; } {
+      pname = "conda-asyncserial";
+      inherit (pythonDeps.asyncserial) version;
+      src = import ./conda/fake-source.nix { inherit pkgs; } {
+        name = "asyncserial";
+        inherit (pythonDeps.asyncserial) version src;
+        dependencies = ["pyserial"];
+      };
+    };
+  };
+
+  condaLinux = rec {
+    conda-binutils-or1k = import ./conda/binutils.nix {
+      inherit pkgs;
+      inherit (mainPackages.binutils-or1k) version src;
+      target = "or1k-linux";
+    };
+    conda-binutils-arm = import ./conda/binutils.nix {
+      inherit pkgs;
+      inherit (mainPackages.binutils-arm) version src;
+      target = "armv7-unknown-linux-gnueabihf";
+    };
+    conda-llvm-or1k = import ./conda/llvm-or1k.nix {
+      inherit pkgs;
+      inherit (mainPackages.llvm-or1k) version;
+      src = mainPackages.llvm-or1k.llvm-src;
+    };
+    conda-llvmlite-artiq = import ./conda/llvmlite-artiq.nix {
+      inherit pkgs conda-llvm-or1k;
+      inherit (mainPackages.llvmlite-artiq) version src;
+    };
+  };
+
+  condaWindowsLegacy = {
+    conda-windows-binutils-or1k = import ./conda-windows/redistribute.nix {
+      inherit pkgs;
+      name = "binutils-or1k";
+      filename = "binutils-or1k-linux-2.27-h93a10e1_6.tar.bz2";
+      baseurl = "https://anaconda.org/m-labs/binutils-or1k-linux/2.27/download/win-64/";
+      sha256 = "0gbks36hfsx3893mihj0bdmg5vwccrq5fw8xp9b9xb8p5pr8qhzx";
+    };
+    conda-windows-llvm-or1k = import ./conda-windows/redistribute.nix {
+      inherit pkgs;
+      name = "llvm-or1k";
+      filename = "llvm-or1k-6.0.0-25.tar.bz2";
+      baseurl = "https://anaconda.org/m-labs/llvm-or1k/6.0.0/download/win-64/";
+      sha256 = "06mnrg79rn9ni0d5z0x3jzb300nhqhbc2h9qbq5m50x3sgm8km63";
+    };
+    conda-windows-llvmlite-artiq = import ./conda-windows/redistribute.nix {
+      inherit pkgs;
+      name = "llvmlite-artiq";
+      filename = "llvmlite-artiq-0.23.0.dev-py35_5.tar.bz2";
+      baseurl = "https://anaconda.org/m-labs/llvmlite-artiq/0.23.0.dev/download/win-64/";
+      sha256 = "10w24w5ljvan06pbvwqj4pzal072jnyynmwm42dn06pq88ryz9wj";
+    };
+  };
+
+  condaWindowsExperimental = rec {
+    conda-windows-binutils-or1k = import ./conda-windows/binutils.nix {
+      inherit pkgs;
+      inherit (mainPackages.binutils-or1k) version src;
+      target = "or1k-linux";
+    };
+    conda-windows-binutils-arm = import ./conda-windows/binutils.nix {
+      inherit pkgs;
+      inherit (mainPackages.binutils-or1k) version src;
+      target = "armv7-unknown-linux-gnueabihf";
+    };
+    conda-windows-llvm-or1k = import ./conda-windows/llvm-or1k.nix {
+      inherit pkgs;
+      inherit (mainPackages.llvm-or1k) version;
+      src = mainPackages.llvm-or1k.llvm-src;
+    };
+    conda-windows-llvmlite-artiq = import ./conda-windows/llvmlite-artiq.nix {
+      inherit pkgs conda-windows-llvm-or1k;
+      inherit (mainPackages.llvmlite-artiq) version src;
+    };
+  };
+
+  condaWindows = if artiq6 then condaWindowsExperimental else condaWindowsLegacy;
+in
+  boardPackages // mainPackages // condaNoarch // condaLinux // condaWindows

artiq-fast/fetchcargo.nix

@@ -0,0 +1,36 @@
+{ stdenv, cacert, git, cargo, cargo-vendor }:
+{ name, src, sha256 }:
+stdenv.mkDerivation {
+  name = "${name}-vendor";
+  strictDeps = true;
+  nativeBuildInputs = [ cacert git cargo cargo-vendor ];
+  inherit src;
+
+  phases = "unpackPhase patchPhase installPhase";
+
+  installPhase = ''
+    if [[ ! -f Cargo.lock ]]; then
+        echo
+        echo "ERROR: The Cargo.lock file doesn't exist"
+        echo
+        echo "Cargo.lock is needed to make sure that cargoSha256 doesn't change"
+        echo "when the registry is updated."
+        echo
+
+        exit 1
+    fi
+
+    export CARGO_HOME=$(mktemp -d cargo-home.XXX)
+
+    cargo vendor
+
+    cp -ar vendor $out
+  '';
+
+  outputHashAlgo = "sha256";
+  outputHashMode = "recursive";
+  outputHash = sha256;
+
+  impureEnvVars = stdenv.lib.fetchers.proxyImpureEnvVars;
+  preferLocalBuild = true;
+}

artiq-fast/pkgs/artiq-src.nix

@@ -0,0 +1 @@
+{ fetchgit }: <artiqSrc>

artiq-fast/pkgs/artiq-timestamp.nix

@@ -0,0 +1,14 @@
+{ stdenv, git, fetchgit }:
+let
+  artiq-timestamp = stdenv.mkDerivation {
+    name = "artiq-timestamp";
+    src = import ./artiq-src.nix { inherit fetchgit; };
+    buildPhase = ''
+      TIMESTAMP=`${git}/bin/git log -1 --format=%ct`
+    '';
+    installPhase = ''
+      echo -n $TIMESTAMP > $out
+    '';
+  };
+in
+  builtins.readFile artiq-timestamp

artiq-fast/pkgs/artiq-version.nix

@@ -0,0 +1,22 @@
+{ stdenv, git, fetchgit }:
+let
+  artiq-version = stdenv.mkDerivation {
+    name = "artiq-version";
+    src = import ./artiq-src.nix { inherit fetchgit; };
+    # keep in sync with ../../artiq-fast.nix
+    buildPhase = ''
+      REV=`${git}/bin/git rev-parse HEAD`
+      MAJOR_VERSION=`cat MAJOR_VERSION`
+      if [ -e BETA ]; then
+        SUFFIX=".beta"
+      else
+        SUFFIX=""
+      fi
+      COMMIT_COUNT=`${git}/bin/git rev-list --count HEAD`
+    '';
+    installPhase = ''
+      echo -n $MAJOR_VERSION.$COMMIT_COUNT.`cut -c1-8 <<< $REV`$SUFFIX > $out
+    '';
+  };
+in
+  builtins.readFile artiq-version

artiq-fast/pkgs/artiq.nix

@@ -0,0 +1,45 @@
+{ stdenv, lib, pythonDeps, fetchgit, git, python3Packages, qt5, binutils-or1k, binutils-arm, llvm-or1k, llvmlite-artiq, libartiq-support, lit, outputcheck }:
+
+python3Packages.buildPythonPackage rec {
+  pname = "artiq";
+  version = import ./artiq-version.nix { inherit stdenv fetchgit git; };
+  src = import ./artiq-src.nix { inherit fetchgit; };
+
+  preBuild = "export VERSIONEER_OVERRIDE=${version}";
+
+  nativeBuildInputs = [ qt5.wrapQtAppsHook ];
+  propagatedBuildInputs = [ binutils-or1k llvm-or1k llvmlite-artiq ]
+    ++ (lib.lists.optionals (lib.strings.versionAtLeast version "6.0") [ binutils-arm ])
+    ++ (with pythonDeps; [ sipyco pyqtgraph-qt5 pythonparser ])
+    ++ (with python3Packages; [ pygit2 numpy dateutil scipy prettytable pyserial python-Levenshtein h5py pyqt5 ])
+    ++ [(if (lib.strings.versionAtLeast version "6.0") then pythonDeps.qasync else python3Packages.quamash)];
+
+  dontWrapQtApps = true;
+  postFixup = ''
+    wrapQtApp "$out/bin/artiq_dashboard"
+    wrapQtApp "$out/bin/artiq_browser"
+    wrapQtApp "$out/bin/artiq_session"
+  '';
+
+  # Modifies PATH to pass the wrapped python environment (i.e. python3.withPackages(...) to subprocesses.
+  # Allows subprocesses using python to find all packages you have installed
+  makeWrapperArgs = [ ''--run 'if [ ! -z "$NIX_PYTHONPREFIX" ]; then export PATH=$NIX_PYTHONPREFIX/bin:$PATH;fi' '' ];
+
+  checkInputs = [ binutils-or1k outputcheck ];
+  checkPhase =
+  ''
+  python -m unittest discover -v artiq.test
+
+  TESTDIR=`mktemp -d`
+  cp --no-preserve=mode,ownership -R ${src}/artiq/test/lit $TESTDIR
+  LIBARTIQ_SUPPORT=${libartiq-support}/libartiq_support.so ${lit}/bin/lit -v $TESTDIR/lit
+  '';
+
+
+  meta = with stdenv.lib; {
+    description = "A leading-edge control system for quantum information experiments";
+    homepage = https://m-labs/artiq;
+    license = licenses.lgpl3;
+    maintainers = [ maintainers.sb0 ];
+  };
+}

artiq-fast/pkgs/binutils.nix

@@ -0,0 +1,35 @@
+{ stdenv, buildPackages
+, fetchurl, zlib
+, platform, target
+}:
+
+stdenv.mkDerivation rec {
+  basename = "binutils";
+  inherit platform;
+  version = "2.30";
+  name = "${basename}-${platform}-${version}";
+  src = fetchurl {
+    url = "https://ftp.gnu.org/gnu/binutils/binutils-${version}.tar.bz2";
+    sha256 = "028cklfqaab24glva1ks2aqa1zxa6w6xmc8q34zs1sb7h22dxspg";
+  };
+  configureFlags =
+    [ "--enable-shared" "--enable-deterministic-archives" "--target=${target}"];
+  outputs = [ "out" "info" "man" ];
+  depsBuildBuild = [ buildPackages.stdenv.cc ];
+  buildInputs = [ zlib ];
+  enableParallelBuilding = true;
+  meta = {
+    description = "Tools for manipulating binaries (linker, assembler, etc.)";
+    longDescription = ''
+      The GNU Binutils are a collection of binary tools.  The main
+      ones are `ld' (the GNU linker) and `as' (the GNU assembler).
+      They also include the BFD (Binary File Descriptor) library,
+      `gprof', `nm', `strip', etc.
+    '';
+    homepage = http://www.gnu.org/software/binutils/;
+    license = stdenv.lib.licenses.gpl3Plus;
+    /* Give binutils a lower priority than gcc-wrapper to prevent a
+       collision due to the ld/as wrappers/symlinks in the latter. */
+    priority = "10";
+  };
+}

artiq-fast/pkgs/libartiq-support.nix

@@ -0,0 +1,15 @@
+{ stdenv, fetchgit, git, rustc }:
+stdenv.mkDerivation rec {
+  pname = "libartiq-support";
+  version = import ./artiq-version.nix { inherit stdenv fetchgit git; };
+
+  src = import ./artiq-src.nix { inherit fetchgit; };
+
+  buildInputs = [ rustc ];
+  phases = [ "buildPhase" ];
+  buildPhase =
+  ''
+  mkdir $out
+  rustc ${src}/artiq/test/libartiq_support/lib.rs --out-dir $out -Cpanic=unwind -g
+  '';
+}

artiq-fast/pkgs/llvm-or1k.nix

@@ -0,0 +1,66 @@
+{ stdenv
+, fetchFromGitHub, runCommand
+, perl, groff, cmake, libxml2, python, libffi, valgrind
+}:
+
+let
+  llvm-src = fetchFromGitHub {
+    rev = "7746fe85489e92e1caffda18b9d7b2ae9e5da1a8";
+    owner = "m-labs";
+    repo = "llvm-or1k";
+    sha256 = "0jqbb3k9r91swsyrdak8fzvs1qi451zy8dqmpqriaxk5g83ny5b7";
+  };
+  clang-src = fetchFromGitHub {
+    rev = "9e996136d52ed506ed8f57ef8b13b0f0f735e6a3";
+    owner = "m-labs";
+    repo = "clang-or1k";
+    sha256 = "0w5f450i76y162aswi2c7jip8x3arzljaxhbqp8qfdffm0rdbjp4";
+  };
+  llvm-clang-src = runCommand "llvm-clang-src" {}
+    ''
+    mkdir -p $out
+    mkdir -p $out/tools/clang
+    cp -r ${llvm-src}/* $out/
+    cp -r ${clang-src}/* $out/tools/clang
+    '';
+in
+  stdenv.mkDerivation rec {
+    pname = "llvm-or1k";
+    version = "6.0.0";
+    passthru.llvm-src = llvm-src;
+    src = llvm-clang-src;
+
+    buildInputs = [ perl groff cmake libxml2 python libffi ] ++ stdenv.lib.optional stdenv.isLinux valgrind;
+
+    preBuild = ''
+      NIX_BUILD_CORES=4
+      makeFlagsArray=(-j''$NIX_BUILD_CORES)
+      mkdir -p $out/
+    '';
+
+    cmakeFlags = with stdenv; [
+      "-DCMAKE_BUILD_TYPE=Release"
+      "-DLLVM_BUILD_LLVM_DYLIB=ON"
+      "-DLLVM_LINK_LLVM_DYLIB=ON"
+      "-DLLVM_TARGETS_TO_BUILD=X86;ARM"
+      "-DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=OR1K"
+      "-DLLVM_ENABLE_ASSERTIONS=OFF"
+      "-DLLVM_INSTALL_UTILS=ON"
+      "-DLLVM_INCLUDE_TESTS=OFF"
+      "-DLLVM_INCLUDE_DOCS=OFF"
+      "-DLLVM_INCLUDE_EXAMPLES=OFF"
+      "-DCLANG_ENABLE_ARCMT=OFF"
+      "-DCLANG_ENABLE_STATIC_ANALYZER=OFF"
+      "-DCLANG_INCLUDE_TESTS=OFF"
+      "-DCLANG_INCLUDE_DOCS=OFF"
+    ];
+
+    enableParallelBuilding = true;
+    meta = {
+      description = "Collection of modular and reusable compiler and toolchain technologies";
+      homepage = http://llvm.org/;
+      license = stdenv.lib.licenses.bsd3;
+      maintainers = with stdenv.lib.maintainers; [ sb0 ];
+      platforms = stdenv.lib.platforms.all;
+    };
+  }

artiq-fast/pkgs/llvmlite-artiq.nix

@@ -0,0 +1,23 @@
+{ stdenv, fetchFromGitHub, llvm-or1k, makeWrapper, python3, ncurses, zlib, python3Packages }:
+python3Packages.buildPythonPackage rec {
+  pname = "llvmlite-artiq";
+  version = "0.23.0.dev";
+  src = fetchFromGitHub {
+    rev = "158f9d3a898dbf055ca513d69505df288c681fea";
+    owner = "m-labs";
+    repo = "llvmlite";
+    sha256 = "1anniwya5jhhr2sxfdnwrsjy17yrk3x61i9hsm1rljsb8zvh68d5";
+  };
+
+  buildInputs = [ makeWrapper python3 ncurses zlib llvm-or1k python3Packages.setuptools ];
+
+  preBuild = "export LLVM_CONFIG=${llvm-or1k}/bin/llvm-config";
+
+  meta = with stdenv.lib; {
+      description = "A lightweight LLVM python binding for writing JIT compilers";
+      homepage    = "http://llvmlite.pydata.org/";
+      maintainers = with maintainers; [ sb0 ];
+      license     = licenses.bsd2;
+      platforms   = platforms.unix;
+  };
+}

artiq-fast/pkgs/openocd.nix

@@ -0,0 +1,74 @@
+{ stdenv, fetchFromGitHub, autoreconfHook, libftdi, libusb1, pkgconfig, hidapi }:
+
+stdenv.mkDerivation rec {
+  pname = "openocd-mlabs";
+  version = "0.10.0";
+
+  src = fetchFromGitHub {
+      owner = "m-labs";
+      repo = "openocd";
+      fetchSubmodules = true;
+      rev = "c383a57adcff332b2c5cf8d55a84626285b42c2c";
+      sha256 = "0xlj9cs72acx3zqagvr7f1c0v6lnqhl8fgrlhgmhmvk5n9knk492";
+  };
+  bscan_spi_bitstreams = fetchFromGitHub {
+      owner = "quartiq";
+      repo = "bscan_spi_bitstreams";
+      rev = "01d8f819f15baf9a8cc5d96945a51e4d267ff564";
+      sha256 = "1zqv47kzgvbn4c8cr019a6wcja7gn5h1z4kvw5bhpc72fyhagal9";
+  };
+
+  nativeBuildInputs = [ pkgconfig ];
+  buildInputs = [ autoreconfHook libftdi libusb1 hidapi ];
+
+  configureFlags = [
+    "--enable-jtag_vpi"
+    "--enable-usb_blaster_libftdi"
+    "--enable-amtjtagaccel"
+    "--enable-gw16012"
+    "--enable-presto_libftdi"
+    "--enable-openjtag_ftdi"
+    "--enable-oocd_trace"
+    "--enable-buspirate"
+    "--enable-sysfsgpio"
+    "--enable-remote-bitbang"
+    "--disable-werror"
+  ];
+
+  NIX_CFLAGS_COMPILE = [
+    "-Wno-implicit-fallthrough"
+    "-Wno-format-truncation"
+    "-Wno-format-overflow"
+    "-Wno-error=tautological-compare"
+  ];
+
+  postInstall = ''
+    mkdir -p "$out/etc/udev/rules.d"
+    rules="$out/share/openocd/contrib/60-openocd.rules"
+    if [ ! -f "$rules" ]; then
+        echo "$rules is missing, must update the Nix file."
+        exit 1
+    fi
+    ln -s "$rules" "$out/etc/udev/rules.d/"
+
+    mkdir -p "$out/share/bscan-spi-bitstreams"
+    cp ${bscan_spi_bitstreams}/*.bit "$out/share/bscan-spi-bitstreams"
+  '';
+
+  meta = with stdenv.lib; {
+    description = "Free and Open On-Chip Debugging, In-System Programming and Boundary-Scan Testing";
+    longDescription = ''
+      OpenOCD provides on-chip programming and debugging support with a layered
+      architecture of JTAG interface and TAP support, debug target support
+      (e.g. ARM, MIPS), and flash chip drivers (e.g. CFI, NAND, etc.).  Several
+      network interfaces are available for interactiving with OpenOCD: HTTP,
+      telnet, TCL, and GDB.  The GDB server enables OpenOCD to function as a
+      "remote target" for source-level debugging of embedded systems using the
+      GNU GDB program.
+    '';
+    homepage = http://openocd.sourceforge.net/;
+    license = licenses.gpl2Plus;
+    maintainers = with maintainers; [ sb0 ];
+    platforms = platforms.linux;
+  };
+}

artiq-fast/pkgs/python-deps.nix

@@ -0,0 +1,308 @@
+{ stdenv, fetchgit, fetchFromGitHub, python3Packages, misoc-new }:
+
+rec {
+  # User dependencies
+  sipyco = python3Packages.buildPythonPackage rec {
+    pname = "sipyco";
+    version = "1.2";
+    src = fetchFromGitHub {
+      owner = "m-labs";
+      repo = "sipyco";
+      rev = "v${version}";
+      sha256 = "02x2s66x9bbzj82d823vjg2i73w7iqwvkrjbbyrsav6ccj7f90sj";
+    };
+    propagatedBuildInputs = with python3Packages; [ numpy ];
+  };
+
+  asyncserial = python3Packages.buildPythonPackage rec {
+    pname = "asyncserial";
+    version = "0.1";
+    src = fetchFromGitHub {
+      owner = "m-labs";
+      repo = "asyncserial";
+      rev = "d95bc1d6c791b0e9785935d2f62f628eb5cdf98d";
+      sha256 = "0yzkka9jk3612v8gx748x6ziwykq5lr7zmr9wzkcls0v2yilqx9k";
+    };
+    propagatedBuildInputs = with python3Packages; [ pyserial ];
+  };
+
+  pythonparser = python3Packages.buildPythonPackage rec {
+    pname = "pythonparser";
+    version = "1.3";
+    src = fetchFromGitHub {
+      owner = "m-labs";
+      repo = "pythonparser";
+      rev = "5b391fe86f43bb9f4f96c5bc0532e2a112db2936";
+      sha256 = "1gw1fk4y2l6bwq0fg2a9dfc1rvq8cv492dyil96amjdhsxvnx35b";
+    };
+    patches = [ ./pythonparserver.patch ];
+    propagatedBuildInputs = with python3Packages; [ regex ];
+  };
+
+  pyqtgraph-qt5 = python3Packages.buildPythonPackage rec {
+    pname = "pyqtgraph_qt5";
+    version = "0.11.0";
+    doCheck = false;
+    pythonImportsCheck = [ "pyqtgraph" ];
+    src = fetchFromGitHub {
+      owner = "pyqtgraph";
+      repo = "pyqtgraph";
+      rev = "pyqtgraph-${version}";
+      sha256 = "03fvpkqdn80ni51msvyivmghw41qk4vplwdqndkvzzzlppimdjbn";
+    };
+    propagatedBuildInputs = with python3Packages; [ scipy numpy pyqt5 pyopengl ];
+  };
+
+  qasync = python3Packages.buildPythonPackage rec {
+    pname = "qasync";
+    version = "0.10.0";
+
+    src = fetchFromGitHub {
+      owner = "CabbageDevelopment";
+      repo = "qasync";
+      rev = "v${version}";
+      sha256 = "1zga8s6dr7gk6awmxkh4pf25gbg8n6dv1j4b0by7y0fhi949qakq";
+    };
+
+    propagatedBuildInputs = [ python3Packages.pyqt5 ];
+
+    checkInputs = [ python3Packages.pytest ];
+    checkPhase = ''
+      pytest -k 'test_qthreadexec.py' # the others cause the test execution to be aborted, I think because of asyncio
+    '';
+  };
+
+  # Development/firmware dependencies
+  artiq-netboot = python3Packages.buildPythonPackage rec {
+    pname = "artiq-netboot";
+    version = "unstable-2020-10-15";
+
+    src = fetchgit {
+      url = "https://git.m-labs.hk/m-labs/artiq-netboot.git";
+      rev = "04f69eb07df73abe4b89fde2c24084f7664f2104";
+      sha256 = "0ql4fr8m8gpb2yql8aqsdqsssxb8zqd6l65kl1f6s9845zy7shs9";
+    };
+  };
+
+  misoc = python3Packages.buildPythonPackage {
+    pname = "misoc";
+    version = if misoc-new then "unstable-2020-12-23" else "unstable-2020-05-29";
+
+    src = if misoc-new
+      then (fetchFromGitHub {
+        owner = "m-labs";
+        repo = "misoc";
+        rev = "c19083f4e86186c8ef11c5119b47f36ed655d19c";
+        sha256 = "14n9gkc5nffc6bvp5dhh4akxispq52iknm2nk3j4zcc3yy47q3an";
+        fetchSubmodules = true;
+      })
+      else (fetchFromGitHub {
+        owner = "m-labs";
+        repo = "misoc";
+        rev = "7e5fe8d38835175202dad2c51d37b20b76fd9e16";
+        sha256 = "0i8bppz7x2s45lx9n49c0r87pqps09z35yzc17amvx21qsplahxn";
+        fetchSubmodules = true;
+      });
+
+    # TODO: fix misoc bitrot and re-enable tests
+    doCheck = false;
+
+    propagatedBuildInputs = with python3Packages; [ pyserial jinja2 numpy asyncserial migen ];
+
+    meta = with stdenv.lib; {
+      description = "A high performance and small footprint system-on-chip based on Migen";
+      homepage    = "https://m-labs.hk/migen";
+      license     = licenses.bsd2;
+      platforms   = platforms.unix;
+    };
+  };
+
+  migen = python3Packages.buildPythonPackage rec {
+    pname = "migen";
+    version = "unstable-2021-01-19";
+
+    src = fetchFromGitHub {
+      owner = "m-labs";
+      repo = "migen";
+      rev = "40b1092a05ec7659c42c8087b0c229dcfb5d9ca1";
+      sha256 = "167yiwnrjzk3xwzfb122fs605639dzlrlyvi11szzwgsj7g226zq";
+    };
+
+    propagatedBuildInputs = with python3Packages; [ colorama ];
+
+    meta = with stdenv.lib; {
+      description = "A Python toolbox for building complex digital hardware";
+      homepage    = "https://m-labs.hk/migen";
+      license     = licenses.bsd2;
+      platforms   = platforms.unix;
+    };
+  };
+
+  microscope = python3Packages.buildPythonPackage rec {
+    pname = "microscope";
+    version = "unstable-2019-05-17";
+
+    src = fetchFromGitHub {
+      owner = "m-labs";
+      repo = "microscope";
+      rev = "bcbc5346c71ad8f7a1a0b7771a9d126b18fdf558";
+      sha256 = "1hslm2nn2z1bl84ya4fsab3pvcdmbziwn7zkai0cm3bv525fjxxd";
+    };
+
+    propagatedBuildInputs = with python3Packages; [ pyserial prettytable msgpack migen ];
+
+    meta = with stdenv.lib; {
+      description = "Finding the bacteria in rotting FPGA designs";
+      homepage    = "https://m-labs.hk/migen";
+      license     = licenses.bsd2;
+      platforms   = platforms.unix;
+    };
+  };
+
+  jesd204b = python3Packages.buildPythonPackage rec {
+    pname = "jesd204b";
+    version = "unstable-2020-12-18";
+
+    src = fetchFromGitHub {
+      owner = "m-labs";
+      repo = "jesd204b";
+      rev = "23bd08f5ee95eb42502f9fbe1c2a45e8c083eab9";
+      sha256 = "0x2mh5fv4q0b1f8pjc2kcyjqbfgiyp1hlvbfgk8dbsraj50i566h";
+    };
+
+    propagatedBuildInputs = with python3Packages; [ migen misoc ];
+
+    meta = with stdenv.lib; {
+      description = "JESD204B core for Migen/MiSoC";
+      homepage    = "https://m-labs.hk/migen";
+      license     = licenses.bsd2;
+      platforms   = platforms.unix;
+    };
+  };
+
+  fastnumbers = python3Packages.buildPythonPackage rec {
+    pname = "fastnumbers";
+    version = "2.2.1";
+
+    src = python3Packages.fetchPypi {
+      inherit pname version;
+      sha256 = "0j15i54p7nri6hkzn1wal9pxri4pgql01wgjccig6ar0v5jjbvsy";
+    };
+
+    meta = with stdenv.lib; {
+      description = "Super-fast and clean conversions to numbers";
+      homepage    = "https://github.com/SethMMorton/fastnumbers";
+      license     = licenses.mit;
+      platforms   = platforms.unix;
+    };
+  };
+
+  ramda = python3Packages.buildPythonPackage {
+    pname = "ramda";
+    version = "unstable-2019-02-01";
+
+    src = fetchFromGitHub {
+      owner = "peteut";
+      repo = "ramda.py";
+      rev = "bd58f8e69d0e9a713d9c1f286a1ac5e5603956b1";
+      sha256 = "0qzd5yp9lbaham8p1wiymdjapzbqsli7lvngv24c3z4ybd9jlq9g";
+    };
+
+    nativeBuildInputs = [ python3Packages.pbr ];
+    propagatedBuildInputs = [ python3Packages.future fastnumbers ];
+
+    checkInputs = [ python3Packages.pytest python3Packages.pytest-flake8 ];
+    checkPhase = "pytest";
+
+    preBuild = ''
+      export PBR_VERSION=0.0.1
+    '';
+
+    meta = with stdenv.lib; {
+      description = "Ramda, ported to Python";
+      homepage    = "https://github.com/peteut/ramda.py";
+      license     = licenses.mit;
+      platforms   = platforms.unix;
+    };
+  };
+
+  migen-axi = python3Packages.buildPythonPackage {
+    pname = "migen-axi";
+    version = "unstable-2021-01-22";
+
+    src = fetchFromGitHub {
+      owner = "peteut";
+      repo = "migen-axi";
+      rev = "9439ee900358598cecc682db327aa30e506172b5";
+      sha256 = "1z5s8ifq7fbpqi6sx2i87rmz63kbgh9ck94fs2qf21ixhxi46nm3";
+    };
+
+    nativeBuildInputs = [ python3Packages.pbr ];
+    propagatedBuildInputs = [ python3Packages.click python3Packages.numpy python3Packages.toolz python3Packages.jinja2 ramda migen misoc ];
+
+    postPatch = ''
+      substituteInPlace requirements.txt \
+        --replace "jinja2==2.10.3" "jinja2"
+      substituteInPlace requirements.txt \
+        --replace "future==0.18.2" "future"
+      substituteInPlace requirements.txt \
+        --replace "ramda==0.5.5" "ramda"
+      substituteInPlace requirements.txt \
+        --replace "colorama==0.4.3" "colorama"
+    '';
+
+
+    checkInputs = [ python3Packages.pytest python3Packages.pytest-flake8 ];
+    checkPhase = "pytest";
+
+    preBuild = ''
+      export PBR_VERSION=0.0.1
+    '';
+
+    meta = with stdenv.lib; {
+      description = "AXI support for Migen/MiSoC";
+      homepage    = "https://github.com/peteut/migen-axi";
+      license     = licenses.mit;
+      platforms   = platforms.unix;
+    };
+  };
+
+  # not using the nixpkgs version because it is Python 2 and an "application"
+  lit = python3Packages.buildPythonPackage rec {
+    pname = "lit";
+    version = "0.7.1";
+
+    src = python3Packages.fetchPypi {
+      inherit pname version;
+      sha256 = "ecef2833aef7f411cb923dac109c7c9dcc7dbe7cafce0650c1e8d19c243d955f";
+    };
+
+    # Non-standard test suite. Needs custom checkPhase.
+    doCheck = false;
+
+    meta = with stdenv.lib; {
+      description = "Portable tool for executing LLVM and Clang style test suites";
+      homepage = http://llvm.org/docs/CommandGuide/lit.html;
+      license = licenses.ncsa;
+    };
+  };
+
+  outputcheck = python3Packages.buildPythonApplication rec {
+    pname = "outputcheck";
+    version = "0.4.2";
+
+    src = fetchFromGitHub {
+      owner = "stp";
+      repo = "OutputCheck";
+      rev = "e0f533d3c5af2949349856c711bf4bca50022b48";
+      sha256 = "1y27vz6jq6sywas07kz3v01sqjd0sga9yv9w2cksqac3v7wmf2a0";
+    };
+    prePatch = "echo ${version} > RELEASE-VERSION";
+
+    meta = with stdenv.lib; {
+      description = "A tool for checking tool output inspired by LLVM's FileCheck";
+      homepage    = "https://github.com/stp/OutputCheck";
+      license     = licenses.bsd3;
+    };
+  };
+}

artiq-fast/pkgs/pythonparserver.patch

@@ -0,0 +1,35 @@
+diff --git a/pythonparser/lexer.py b/pythonparser/lexer.py
+index a62eaf1..c70e85a 100644
+--- a/pythonparser/lexer.py
++++ b/pythonparser/lexer.py
+@@ -79,6 +79,8 @@ class Lexer:
+         (3, 4): _reserved_3_1,
+         (3, 5): _reserved_3_5,
+         (3, 6): _reserved_3_5,
++        (3, 7): _reserved_3_5,
++        (3, 8): _reserved_3_5,
+     }
+     """
+     A map from a tuple (*major*, *minor*) corresponding to Python version to
+@@ -102,6 +104,8 @@ class Lexer:
+         (3, 4): _string_prefixes_3_3,
+         (3, 5): _string_prefixes_3_3,
+         (3, 6): _string_prefixes_3_6,
++        (3, 7): _string_prefixes_3_6,
++        (3, 8): _string_prefixes_3_6,
+     }
+     """
+     A map from a tuple (*major*, *minor*) corresponding to Python version to
+diff --git a/pythonparser/parser.py b/pythonparser/parser.py
+index 10c741d..62b93e1 100644
+--- a/pythonparser/parser.py
++++ b/pythonparser/parser.py
+@@ -419,7 +419,7 @@ class Parser(object):
+             self.expr_stmt_1     = self.expr_stmt_1__26
+             self.yield_expr      = self.yield_expr__26
+             return
+-        elif version in ((3, 0), (3, 1), (3, 2), (3, 3), (3, 4), (3, 5), (3, 6)):
++        elif version in ((3, 0), (3, 1), (3, 2), (3, 3), (3, 4), (3, 5), (3, 6), (3, 7), (3, 8)):
+             if version == (3, 0):
+                 self.with_stmt       = self.with_stmt__26 # lol
+             else:

artiq-fast/pkgs/rust/binaryBuild.nix

@@ -0,0 +1,117 @@
+{ stdenv, makeWrapper, bash, buildRustPackage, curl, darwin
+, version
+, src
+, platform
+, versionType
+}:
+
+let
+  inherit (stdenv.lib) optionalString;
+  inherit (darwin.apple_sdk.frameworks) Security;
+
+  bootstrapping = versionType == "bootstrap";
+
+  installComponents
+    = "rustc,rust-std-${platform}"
+    + (optionalString bootstrapping ",cargo")
+    ;
+in
+
+rec {
+  inherit buildRustPackage;
+
+  rustc = stdenv.mkDerivation rec {
+    name = "rustc-${versionType}-${version}";
+
+    inherit version;
+    inherit src;
+
+    meta = with stdenv.lib; {
+      homepage = http://www.rust-lang.org/;
+      description = "A safe, concurrent, practical language";
+      maintainers = with maintainers; [ sb0 ];
+      license = [ licenses.mit licenses.asl20 ];
+    };
+
+    buildInputs = [ bash ] ++ stdenv.lib.optional stdenv.isDarwin Security;
+
+    postPatch = ''
+      patchShebangs .
+    '';
+
+    installPhase = ''
+      ./install.sh --prefix=$out \
+        --components=${installComponents}
+
+      ${optionalString (stdenv.isLinux && bootstrapping) ''
+        patchelf \
+          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
+          "$out/bin/rustc"
+        patchelf \
+          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
+          "$out/bin/rustdoc"
+        patchelf \
+          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
+          "$out/bin/cargo"
+      ''}
+
+      ${optionalString (stdenv.isDarwin && bootstrapping) ''
+        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/rustc"
+        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/rustdoc"
+        install_name_tool -change /usr/lib/libiconv.2.dylib '${darwin.libiconv}/lib/libiconv.2.dylib' "$out/bin/cargo"
+        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/cargo"
+        install_name_tool -change /usr/lib/libcurl.4.dylib '${stdenv.lib.getLib curl}/lib/libcurl.4.dylib' "$out/bin/cargo"
+        for f in $out/lib/lib*.dylib; do
+          install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$f"
+        done
+      ''}
+
+      # Do NOT, I repeat, DO NOT use `wrapProgram` on $out/bin/rustc
+      # (or similar) here. It causes strange effects where rustc loads
+      # the wrong libraries in a bootstrap-build causing failures that
+      # are very hard to track down. For details, see
+      # https://github.com/rust-lang/rust/issues/34722#issuecomment-232164943
+    '';
+  };
+
+  cargo = stdenv.mkDerivation rec {
+    name = "cargo-${versionType}-${version}";
+
+    inherit version;
+    inherit src;
+
+    meta = with stdenv.lib; {
+      homepage = http://www.rust-lang.org/;
+      description = "A safe, concurrent, practical language";
+      maintainers = with maintainers; [ sb0 ];
+      license = [ licenses.mit licenses.asl20 ];
+    };
+
+    buildInputs = [ makeWrapper bash ] ++ stdenv.lib.optional stdenv.isDarwin Security;
+
+    postPatch = ''
+      patchShebangs .
+    '';
+
+    installPhase = ''
+      patchShebangs ./install.sh
+      ./install.sh --prefix=$out \
+        --components=cargo
+
+      ${optionalString (stdenv.isLinux && bootstrapping) ''
+        patchelf \
+          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
+          "$out/bin/cargo"
+      ''}
+
+      ${optionalString (stdenv.isDarwin && bootstrapping) ''
+        install_name_tool -change /usr/lib/libiconv.2.dylib '${darwin.libiconv}/lib/libiconv.2.dylib' "$out/bin/cargo"
+        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/cargo"
+        install_name_tool -change /usr/lib/libcurl.4.dylib '${stdenv.lib.getLib curl}/lib/libcurl.4.dylib' "$out/bin/cargo"
+      ''}
+
+      wrapProgram "$out/bin/cargo" \
+        --suffix PATH : "${rustc}/bin"
+    '';
+  };
+}

artiq-fast/pkgs/rust/bootstrap.nix

@@ -0,0 +1,42 @@
+{ stdenv, fetchurl, callPackage }:
+
+let
+  # Note: the version MUST be one version prior to the version we're
+  # building
+  version = "1.28.0";
+
+  # fetch hashes by running `print-hashes.sh 1.24.1`
+  hashes = {
+    i686-unknown-linux-gnu = "de7cdb4e665e897ea9b10bf6fd545f900683296456d6a11d8510397bb330455f";
+    x86_64-unknown-linux-gnu = "2a1390340db1d24a9498036884e6b2748e9b4b057fc5219694e298bdaa37b810";
+    armv7-unknown-linux-gnueabihf = "346558d14050853b87049e5e1fbfae0bf0360a2f7c57433c6985b1a879c349a2";
+    aarch64-unknown-linux-gnu = "9b6fbcee73070332c811c0ddff399fa31965bec62ef258656c0c90354f6231c1";
+    i686-apple-darwin = "752e2c9182e057c4a54152d1e0b3949482c225d02bb69d9d9a4127dc2a65fb68";
+    x86_64-apple-darwin = "5d7a70ed4701fe9410041c1eea025c95cad97e5b3d8acc46426f9ac4f9f02393";
+  };
+
+  platform =
+    if stdenv.hostPlatform.system == "i686-linux"
+    then "i686-unknown-linux-gnu"
+    else if stdenv.hostPlatform.system == "x86_64-linux"
+    then "x86_64-unknown-linux-gnu"
+    else if stdenv.hostPlatform.system == "armv7l-linux"
+    then "armv7-unknown-linux-gnueabihf"
+    else if stdenv.hostPlatform.system == "aarch64-linux"
+    then "aarch64-unknown-linux-gnu"
+    else if stdenv.hostPlatform.system == "i686-darwin"
+    then "i686-apple-darwin"
+    else if stdenv.hostPlatform.system == "x86_64-darwin"
+    then "x86_64-apple-darwin"
+    else throw "missing bootstrap url for platform ${stdenv.hostPlatform.system}";
+
+  src = fetchurl {
+     url = "https://static.rust-lang.org/dist/rust-${version}-${platform}.tar.gz";
+     sha256 = hashes."${platform}";
+  };
+
+in callPackage ./binaryBuild.nix
+  { inherit version src platform;
+    buildRustPackage = null;
+    versionType = "bootstrap";
+  }

artiq-fast/pkgs/rust/cargo-vendor-carnix.nix

@@ -0,0 +1,693 @@
+# Generated by carnix 0.10.0: carnix generate-nix --src .
+{ lib, buildPlatform, buildRustCrate, buildRustCrateHelpers, cratesIO, fetchgit }:
+with buildRustCrateHelpers;
+let inherit (lib.lists) fold;
+    inherit (lib.attrsets) recursiveUpdate;
+in
+rec {
+  crates = cratesIO // rec {
+# cargo-vendor-0.1.23
+
+    crates.cargo_vendor."0.1.23" = deps: { features?(features_.cargo_vendor."0.1.23" deps {}) }: buildRustCrate {
+      crateName = "cargo-vendor";
+      version = "0.1.23";
+      description = "A Cargo subcommand to vendor all crates.io dependencies onto the local\nfilesystem.\n";
+      authors = [ "Alex Crichton <alex@alexcrichton.com>" ];
+      edition = "2018";
+      src = exclude [ ".git" "target" ] ./.;
+      dependencies = mapFeatures features ([
+        (cratesIO.crates."cargo"."${deps."cargo_vendor"."0.1.23"."cargo"}" deps)
+        (cratesIO.crates."docopt"."${deps."cargo_vendor"."0.1.23"."docopt"}" deps)
+        (cratesIO.crates."env_logger"."${deps."cargo_vendor"."0.1.23"."env_logger"}" deps)
+        (cratesIO.crates."failure"."${deps."cargo_vendor"."0.1.23"."failure"}" deps)
+        (cratesIO.crates."serde"."${deps."cargo_vendor"."0.1.23"."serde"}" deps)
+        (cratesIO.crates."serde_json"."${deps."cargo_vendor"."0.1.23"."serde_json"}" deps)
+        (cratesIO.crates."toml"."${deps."cargo_vendor"."0.1.23"."toml"}" deps)
+      ]
+        ++ (if features.cargo_vendor."0.1.23".openssl or false then [ (cratesIO.crates.openssl."${deps."cargo_vendor"."0.1.23".openssl}" deps) ] else []));
+      features = mkFeatures (features."cargo_vendor"."0.1.23" or {});
+    };
+    features_.cargo_vendor."0.1.23" = deps: f: updateFeatures f (rec {
+      cargo."${deps.cargo_vendor."0.1.23".cargo}".default = true;
+      cargo_vendor."0.1.23".default = (f.cargo_vendor."0.1.23".default or true);
+      docopt."${deps.cargo_vendor."0.1.23".docopt}".default = true;
+      env_logger."${deps.cargo_vendor."0.1.23".env_logger}".default = true;
+      failure."${deps.cargo_vendor."0.1.23".failure}".default = true;
+      openssl = fold recursiveUpdate {} [
+        { "${deps.cargo_vendor."0.1.23".openssl}"."vendored" =
+          (f.openssl."${deps.cargo_vendor."0.1.23".openssl}"."vendored" or false) ||
+          (cargo_vendor."0.1.23"."vendored-openssl" or false) ||
+          (f."cargo_vendor"."0.1.23"."vendored-openssl" or false); }
+        { "${deps.cargo_vendor."0.1.23".openssl}".default = true; }
+      ];
+      serde = fold recursiveUpdate {} [
+        { "${deps.cargo_vendor."0.1.23".serde}"."derive" = true; }
+        { "${deps.cargo_vendor."0.1.23".serde}".default = true; }
+      ];
+      serde_json."${deps.cargo_vendor."0.1.23".serde_json}".default = true;
+      toml."${deps.cargo_vendor."0.1.23".toml}".default = true;
+    }) [
+      (cratesIO.features_.cargo."${deps."cargo_vendor"."0.1.23"."cargo"}" deps)
+      (cratesIO.features_.docopt."${deps."cargo_vendor"."0.1.23"."docopt"}" deps)
+      (cratesIO.features_.env_logger."${deps."cargo_vendor"."0.1.23"."env_logger"}" deps)
+      (cratesIO.features_.failure."${deps."cargo_vendor"."0.1.23"."failure"}" deps)
+      (cratesIO.features_.openssl."${deps."cargo_vendor"."0.1.23"."openssl"}" deps)
+      (cratesIO.features_.serde."${deps."cargo_vendor"."0.1.23"."serde"}" deps)
+      (cratesIO.features_.serde_json."${deps."cargo_vendor"."0.1.23"."serde_json"}" deps)
+      (cratesIO.features_.toml."${deps."cargo_vendor"."0.1.23"."toml"}" deps)
+    ];
+
+
+# end
+
+  };
+
+  cargo_vendor = crates.crates.cargo_vendor."0.1.23" deps;
+  __all = [ (cargo_vendor {}) ];
+  deps.adler32."1.0.3" = {};
+  deps.aho_corasick."0.7.3" = {
+    memchr = "2.2.0";
+  };
+  deps.ansi_term."0.11.0" = {
+    winapi = "0.3.7";
+  };
+  deps.atty."0.2.11" = {
+    termion = "1.5.1";
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.autocfg."0.1.2" = {};
+  deps.backtrace."0.3.15" = {
+    cfg_if = "0.1.7";
+    rustc_demangle = "0.1.14";
+    autocfg = "0.1.2";
+    backtrace_sys = "0.1.28";
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.backtrace_sys."0.1.28" = {
+    libc = "0.2.51";
+    cc = "1.0.35";
+  };
+  deps.bitflags."1.0.4" = {};
+  deps.bstr."0.1.2" = {
+    memchr = "2.2.0";
+  };
+  deps.build_const."0.2.1" = {};
+  deps.byteorder."1.3.1" = {};
+  deps.bytes."0.4.12" = {
+    byteorder = "1.3.1";
+    iovec = "0.1.2";
+  };
+  deps.bytesize."1.0.0" = {};
+  deps.cargo."0.35.0" = {
+    atty = "0.2.11";
+    byteorder = "1.3.1";
+    bytesize = "1.0.0";
+    clap = "2.33.0";
+    crates_io = "0.23.0";
+    crossbeam_utils = "0.6.5";
+    crypto_hash = "0.3.3";
+    curl = "0.4.21";
+    curl_sys = "0.4.18";
+    env_logger = "0.6.1";
+    failure = "0.1.5";
+    filetime = "0.2.4";
+    flate2 = "1.0.7";
+    fs2 = "0.4.3";
+    git2 = "0.8.0";
+    git2_curl = "0.9.0";
+    glob = "0.2.11";
+    hex = "0.3.2";
+    home = "0.3.4";
+    ignore = "0.4.7";
+    im_rc = "12.3.4";
+    jobserver = "0.1.13";
+    lazy_static = "1.3.0";
+    lazycell = "1.2.1";
+    libc = "0.2.51";
+    libgit2_sys = "0.7.11";
+    log = "0.4.6";
+    num_cpus = "1.10.0";
+    opener = "0.3.2";
+    rustc_workspace_hack = "1.0.0";
+    rustfix = "0.4.5";
+    same_file = "1.0.4";
+    semver = "0.9.0";
+    serde = "1.0.90";
+    serde_ignored = "0.0.4";
+    serde_json = "1.0.39";
+    shell_escape = "0.1.4";
+    tar = "0.4.22";
+    tempfile = "3.0.7";
+    termcolor = "1.0.4";
+    toml = "0.4.10";
+    unicode_width = "0.1.5";
+    url = "1.7.2";
+    url_serde = "0.2.0";
+    core_foundation = "0.6.4";
+    fwdansi = "1.0.1";
+    miow = "0.3.3";
+    winapi = "0.3.7";
+  };
+  deps.cargo_vendor."0.1.23" = {
+    cargo = "0.35.0";
+    docopt = "1.1.0";
+    env_logger = "0.6.1";
+    failure = "0.1.5";
+    openssl = "0.10.20";
+    serde = "1.0.90";
+    serde_json = "1.0.39";
+    toml = "0.5.0";
+  };
+  deps.cc."1.0.35" = {};
+  deps.cfg_if."0.1.7" = {};
+  deps.clap."2.33.0" = {
+    atty = "0.2.11";
+    bitflags = "1.0.4";
+    strsim = "0.8.0";
+    textwrap = "0.11.0";
+    unicode_width = "0.1.5";
+    vec_map = "0.8.1";
+    ansi_term = "0.11.0";
+  };
+  deps.cloudabi."0.0.3" = {
+    bitflags = "1.0.4";
+  };
+  deps.commoncrypto."0.2.0" = {
+    commoncrypto_sys = "0.2.0";
+  };
+  deps.commoncrypto_sys."0.2.0" = {
+    libc = "0.2.51";
+  };
+  deps.core_foundation."0.6.4" = {
+    core_foundation_sys = "0.6.2";
+    libc = "0.2.51";
+  };
+  deps.core_foundation_sys."0.6.2" = {};
+  deps.crates_io."0.23.0" = {
+    curl = "0.4.21";
+    failure = "0.1.5";
+    http = "0.1.17";
+    serde = "1.0.90";
+    serde_derive = "1.0.90";
+    serde_json = "1.0.39";
+    url = "1.7.2";
+  };
+  deps.crc."1.8.1" = {
+    build_const = "0.2.1";
+  };
+  deps.crc32fast."1.2.0" = {
+    cfg_if = "0.1.7";
+  };
+  deps.crossbeam_channel."0.3.8" = {
+    crossbeam_utils = "0.6.5";
+    smallvec = "0.6.9";
+  };
+  deps.crossbeam_utils."0.6.5" = {
+    cfg_if = "0.1.7";
+    lazy_static = "1.3.0";
+  };
+  deps.crypto_hash."0.3.3" = {
+    hex = "0.3.2";
+    commoncrypto = "0.2.0";
+    openssl = "0.10.20";
+    winapi = "0.3.7";
+  };
+  deps.curl."0.4.21" = {
+    curl_sys = "0.4.18";
+    libc = "0.2.51";
+    socket2 = "0.3.8";
+    openssl_probe = "0.1.2";
+    openssl_sys = "0.9.43";
+    kernel32_sys = "0.2.2";
+    schannel = "0.1.15";
+    winapi = "0.2.8";
+  };
+  deps.curl_sys."0.4.18" = {
+    libc = "0.2.51";
+    libnghttp2_sys = "0.1.1";
+    libz_sys = "1.0.25";
+    cc = "1.0.35";
+    pkg_config = "0.3.14";
+    openssl_sys = "0.9.43";
+    winapi = "0.3.7";
+  };
+  deps.docopt."1.1.0" = {
+    lazy_static = "1.3.0";
+    regex = "1.1.6";
+    serde = "1.0.90";
+    strsim = "0.9.1";
+  };
+  deps.either."1.5.2" = {};
+  deps.env_logger."0.6.1" = {
+    atty = "0.2.11";
+    humantime = "1.2.0";
+    log = "0.4.6";
+    regex = "1.1.6";
+    termcolor = "1.0.4";
+  };
+  deps.failure."0.1.5" = {
+    backtrace = "0.3.15";
+    failure_derive = "0.1.5";
+  };
+  deps.failure_derive."0.1.5" = {
+    proc_macro2 = "0.4.27";
+    quote = "0.6.12";
+    syn = "0.15.32";
+    synstructure = "0.10.1";
+  };
+  deps.filetime."0.2.4" = {
+    cfg_if = "0.1.7";
+    redox_syscall = "0.1.54";
+    libc = "0.2.51";
+  };
+  deps.flate2."1.0.7" = {
+    crc32fast = "1.2.0";
+    libc = "0.2.51";
+    libz_sys = "1.0.25";
+    miniz_sys = "0.1.11";
+    miniz_oxide_c_api = "0.2.1";
+  };
+  deps.fnv."1.0.6" = {};
+  deps.foreign_types."0.3.2" = {
+    foreign_types_shared = "0.1.1";
+  };
+  deps.foreign_types_shared."0.1.1" = {};
+  deps.fs2."0.4.3" = {
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.fuchsia_cprng."0.1.1" = {};
+  deps.fwdansi."1.0.1" = {
+    memchr = "2.2.0";
+    termcolor = "1.0.4";
+  };
+  deps.git2."0.8.0" = {
+    bitflags = "1.0.4";
+    libc = "0.2.51";
+    libgit2_sys = "0.7.11";
+    log = "0.4.6";
+    url = "1.7.2";
+    openssl_probe = "0.1.2";
+    openssl_sys = "0.9.43";
+  };
+  deps.git2_curl."0.9.0" = {
+    curl = "0.4.21";
+    git2 = "0.8.0";
+    log = "0.4.6";
+    url = "1.7.2";
+  };
+  deps.glob."0.2.11" = {};
+  deps.globset."0.4.3" = {
+    aho_corasick = "0.7.3";
+    bstr = "0.1.2";
+    fnv = "1.0.6";
+    log = "0.4.6";
+    regex = "1.1.6";
+  };
+  deps.hashbrown."0.1.8" = {
+    byteorder = "1.3.1";
+    scopeguard = "0.3.3";
+  };
+  deps.hex."0.3.2" = {};
+  deps.home."0.3.4" = {
+    scopeguard = "0.3.3";
+    winapi = "0.3.7";
+  };
+  deps.http."0.1.17" = {
+    bytes = "0.4.12";
+    fnv = "1.0.6";
+    itoa = "0.4.3";
+  };
+  deps.humantime."1.2.0" = {
+    quick_error = "1.2.2";
+  };
+  deps.idna."0.1.5" = {
+    matches = "0.1.8";
+    unicode_bidi = "0.3.4";
+    unicode_normalization = "0.1.8";
+  };
+  deps.ignore."0.4.7" = {
+    crossbeam_channel = "0.3.8";
+    globset = "0.4.3";
+    lazy_static = "1.3.0";
+    log = "0.4.6";
+    memchr = "2.2.0";
+    regex = "1.1.6";
+    same_file = "1.0.4";
+    thread_local = "0.3.6";
+    walkdir = "2.2.7";
+    winapi_util = "0.1.2";
+  };
+  deps.im_rc."12.3.4" = {
+    sized_chunks = "0.1.3";
+    typenum = "1.10.0";
+    rustc_version = "0.2.3";
+  };
+  deps.iovec."0.1.2" = {
+    libc = "0.2.51";
+    winapi = "0.2.8";
+  };
+  deps.itertools."0.7.11" = {
+    either = "1.5.2";
+  };
+  deps.itoa."0.4.3" = {};
+  deps.jobserver."0.1.13" = {
+    log = "0.4.6";
+    libc = "0.2.51";
+    rand = "0.6.5";
+  };
+  deps.kernel32_sys."0.2.2" = {
+    winapi = "0.2.8";
+    winapi_build = "0.1.1";
+  };
+  deps.lazy_static."1.3.0" = {};
+  deps.lazycell."1.2.1" = {};
+  deps.libc."0.2.51" = {};
+  deps.libgit2_sys."0.7.11" = {
+    curl_sys = "0.4.18";
+    libc = "0.2.51";
+    libssh2_sys = "0.2.11";
+    libz_sys = "1.0.25";
+    cc = "1.0.35";
+    pkg_config = "0.3.14";
+    openssl_sys = "0.9.43";
+  };
+  deps.libnghttp2_sys."0.1.1" = {
+    libc = "0.2.51";
+    cc = "1.0.35";
+  };
+  deps.libssh2_sys."0.2.11" = {
+    libc = "0.2.51";
+    libz_sys = "1.0.25";
+    cc = "1.0.35";
+    pkg_config = "0.3.14";
+    openssl_sys = "0.9.43";
+  };
+  deps.libz_sys."1.0.25" = {
+    libc = "0.2.51";
+    cc = "1.0.35";
+    pkg_config = "0.3.14";
+  };
+  deps.lock_api."0.1.5" = {
+    scopeguard = "0.3.3";
+  };
+  deps.log."0.4.6" = {
+    cfg_if = "0.1.7";
+  };
+  deps.matches."0.1.8" = {};
+  deps.matrixmultiply."0.1.15" = {
+    rawpointer = "0.1.0";
+  };
+  deps.memchr."2.2.0" = {};
+  deps.miniz_sys."0.1.11" = {
+    libc = "0.2.51";
+    cc = "1.0.35";
+  };
+  deps.miniz_oxide."0.2.1" = {
+    adler32 = "1.0.3";
+  };
+  deps.miniz_oxide_c_api."0.2.1" = {
+    crc = "1.8.1";
+    libc = "0.2.51";
+    miniz_oxide = "0.2.1";
+    cc = "1.0.35";
+  };
+  deps.miow."0.3.3" = {
+    socket2 = "0.3.8";
+    winapi = "0.3.7";
+  };
+  deps.ndarray."0.12.1" = {
+    itertools = "0.7.11";
+    matrixmultiply = "0.1.15";
+    num_complex = "0.2.1";
+    num_traits = "0.2.6";
+  };
+  deps.num_complex."0.2.1" = {
+    num_traits = "0.2.6";
+  };
+  deps.num_traits."0.2.6" = {};
+  deps.num_cpus."1.10.0" = {
+    libc = "0.2.51";
+  };
+  deps.once_cell."0.1.8" = {
+    parking_lot = "0.7.1";
+  };
+  deps.opener."0.3.2" = {
+    failure = "0.1.5";
+    failure_derive = "0.1.5";
+    winapi = "0.3.7";
+  };
+  deps.openssl."0.10.20" = {
+    bitflags = "1.0.4";
+    cfg_if = "0.1.7";
+    foreign_types = "0.3.2";
+    lazy_static = "1.3.0";
+    libc = "0.2.51";
+    openssl_sys = "0.9.43";
+  };
+  deps.openssl_probe."0.1.2" = {};
+  deps.openssl_src."111.2.1+1.1.1b" = {
+    cc = "1.0.35";
+  };
+  deps.openssl_sys."0.9.43" = {
+    libc = "0.2.51";
+    cc = "1.0.35";
+    openssl_src = "111.2.1+1.1.1b";
+    pkg_config = "0.3.14";
+    rustc_version = "0.2.3";
+  };
+  deps.parking_lot."0.7.1" = {
+    lock_api = "0.1.5";
+    parking_lot_core = "0.4.0";
+  };
+  deps.parking_lot_core."0.4.0" = {
+    rand = "0.6.5";
+    smallvec = "0.6.9";
+    rustc_version = "0.2.3";
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.percent_encoding."1.0.1" = {};
+  deps.pkg_config."0.3.14" = {};
+  deps.proc_macro2."0.4.27" = {
+    unicode_xid = "0.1.0";
+  };
+  deps.quick_error."1.2.2" = {};
+  deps.quote."0.6.12" = {
+    proc_macro2 = "0.4.27";
+  };
+  deps.rand."0.6.5" = {
+    rand_chacha = "0.1.1";
+    rand_core = "0.4.0";
+    rand_hc = "0.1.0";
+    rand_isaac = "0.1.1";
+    rand_jitter = "0.1.3";
+    rand_os = "0.1.3";
+    rand_pcg = "0.1.2";
+    rand_xorshift = "0.1.1";
+    autocfg = "0.1.2";
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.rand_chacha."0.1.1" = {
+    rand_core = "0.3.1";
+    autocfg = "0.1.2";
+  };
+  deps.rand_core."0.3.1" = {
+    rand_core = "0.4.0";
+  };
+  deps.rand_core."0.4.0" = {};
+  deps.rand_hc."0.1.0" = {
+    rand_core = "0.3.1";
+  };
+  deps.rand_isaac."0.1.1" = {
+    rand_core = "0.3.1";
+  };
+  deps.rand_jitter."0.1.3" = {
+    rand_core = "0.4.0";
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.rand_os."0.1.3" = {
+    rand_core = "0.4.0";
+    rdrand = "0.4.0";
+    cloudabi = "0.0.3";
+    fuchsia_cprng = "0.1.1";
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.rand_pcg."0.1.2" = {
+    rand_core = "0.4.0";
+    autocfg = "0.1.2";
+  };
+  deps.rand_xorshift."0.1.1" = {
+    rand_core = "0.3.1";
+  };
+  deps.rawpointer."0.1.0" = {};
+  deps.rdrand."0.4.0" = {
+    rand_core = "0.3.1";
+  };
+  deps.redox_syscall."0.1.54" = {};
+  deps.redox_termios."0.1.1" = {
+    redox_syscall = "0.1.54";
+  };
+  deps.regex."1.1.6" = {
+    aho_corasick = "0.7.3";
+    memchr = "2.2.0";
+    regex_syntax = "0.6.6";
+    thread_local = "0.3.6";
+    utf8_ranges = "1.0.2";
+  };
+  deps.regex_syntax."0.6.6" = {
+    ucd_util = "0.1.3";
+  };
+  deps.remove_dir_all."0.5.1" = {
+    winapi = "0.3.7";
+  };
+  deps.rustc_demangle."0.1.14" = {};
+  deps.rustc_workspace_hack."1.0.0" = {};
+  deps.rustc_version."0.2.3" = {
+    semver = "0.9.0";
+  };
+  deps.rustfix."0.4.5" = {
+    failure = "0.1.5";
+    log = "0.4.6";
+    serde = "1.0.90";
+    serde_derive = "1.0.90";
+    serde_json = "1.0.39";
+  };
+  deps.ryu."0.2.7" = {};
+  deps.same_file."1.0.4" = {
+    winapi_util = "0.1.2";
+  };
+  deps.schannel."0.1.15" = {
+    lazy_static = "1.3.0";
+    winapi = "0.3.7";
+  };
+  deps.scopeguard."0.3.3" = {};
+  deps.semver."0.9.0" = {
+    semver_parser = "0.7.0";
+    serde = "1.0.90";
+  };
+  deps.semver_parser."0.7.0" = {};
+  deps.serde."1.0.90" = {
+    serde_derive = "1.0.90";
+  };
+  deps.serde_derive."1.0.90" = {
+    proc_macro2 = "0.4.27";
+    quote = "0.6.12";
+    syn = "0.15.32";
+  };
+  deps.serde_ignored."0.0.4" = {
+    serde = "1.0.90";
+  };
+  deps.serde_json."1.0.39" = {
+    itoa = "0.4.3";
+    ryu = "0.2.7";
+    serde = "1.0.90";
+  };
+  deps.shell_escape."0.1.4" = {};
+  deps.sized_chunks."0.1.3" = {
+    typenum = "1.10.0";
+  };
+  deps.smallvec."0.6.9" = {};
+  deps.socket2."0.3.8" = {
+    cfg_if = "0.1.7";
+    libc = "0.2.51";
+    redox_syscall = "0.1.54";
+    winapi = "0.3.7";
+  };
+  deps.strsim."0.8.0" = {};
+  deps.strsim."0.9.1" = {
+    hashbrown = "0.1.8";
+    ndarray = "0.12.1";
+  };
+  deps.syn."0.15.32" = {
+    proc_macro2 = "0.4.27";
+    quote = "0.6.12";
+    unicode_xid = "0.1.0";
+  };
+  deps.synstructure."0.10.1" = {
+    proc_macro2 = "0.4.27";
+    quote = "0.6.12";
+    syn = "0.15.32";
+    unicode_xid = "0.1.0";
+  };
+  deps.tar."0.4.22" = {
+    filetime = "0.2.4";
+    redox_syscall = "0.1.54";
+    libc = "0.2.51";
+  };
+  deps.tempfile."3.0.7" = {
+    cfg_if = "0.1.7";
+    rand = "0.6.5";
+    remove_dir_all = "0.5.1";
+    redox_syscall = "0.1.54";
+    libc = "0.2.51";
+    winapi = "0.3.7";
+  };
+  deps.termcolor."1.0.4" = {
+    wincolor = "1.0.1";
+  };
+  deps.termion."1.5.1" = {
+    libc = "0.2.51";
+    redox_syscall = "0.1.54";
+    redox_termios = "0.1.1";
+  };
+  deps.textwrap."0.11.0" = {
+    unicode_width = "0.1.5";
+  };
+  deps.thread_local."0.3.6" = {
+    lazy_static = "1.3.0";
+  };
+  deps.toml."0.4.10" = {
+    serde = "1.0.90";
+  };
+  deps.toml."0.5.0" = {
+    serde = "1.0.90";
+  };
+  deps.typenum."1.10.0" = {};
+  deps.ucd_util."0.1.3" = {};
+  deps.unicode_bidi."0.3.4" = {
+    matches = "0.1.8";
+  };
+  deps.unicode_normalization."0.1.8" = {
+    smallvec = "0.6.9";
+  };
+  deps.unicode_width."0.1.5" = {};
+  deps.unicode_xid."0.1.0" = {};
+  deps.url."1.7.2" = {
+    idna = "0.1.5";
+    matches = "0.1.8";
+    percent_encoding = "1.0.1";
+  };
+  deps.url_serde."0.2.0" = {
+    serde = "1.0.90";
+    url = "1.7.2";
+  };
+  deps.utf8_ranges."1.0.2" = {};
+  deps.vcpkg."0.2.6" = {};
+  deps.vec_map."0.8.1" = {};
+  deps.walkdir."2.2.7" = {
+    same_file = "1.0.4";
+    winapi = "0.3.7";
+    winapi_util = "0.1.2";
+  };
+  deps.winapi."0.2.8" = {};
+  deps.winapi."0.3.7" = {
+    winapi_i686_pc_windows_gnu = "0.4.0";
+    winapi_x86_64_pc_windows_gnu = "0.4.0";
+  };
+  deps.winapi_build."0.1.1" = {};
+  deps.winapi_i686_pc_windows_gnu."0.4.0" = {};
+  deps.winapi_util."0.1.2" = {
+    winapi = "0.3.7";
+  };
+  deps.winapi_x86_64_pc_windows_gnu."0.4.0" = {};
+  deps.wincolor."1.0.1" = {
+    winapi = "0.3.7";
+    winapi_util = "0.1.2";
+  };
+}

artiq-fast/pkgs/rust/cargo-vendor.nix

@@ -0,0 +1,10 @@
+{ callPackage, fetchFromGitHub }:
+
+((callPackage ./cargo-vendor-carnix.nix {}).cargo_vendor {}).overrideAttrs (attrs: {
+  src = fetchFromGitHub {
+    owner = "alexcrichton";
+    repo = "cargo-vendor";
+    rev = "9355661303ce2870d68a69d99953fce22581e31e";
+    sha256 = "0d4j3r09am3ynwhczimzv39264f5xz37jxa9js123y46w5by3wd2";
+  };
+})

artiq-fast/pkgs/rust/cargo.nix

@@ -0,0 +1,62 @@
+{ stdenv, file, curl, pkgconfig, python, openssl, cmake, zlib
+, makeWrapper, libiconv, cacert, rustPlatform, rustc, libgit2
+, fetchurl
+}:
+
+rustPlatform.buildRustPackage rec {
+  # Note: we can't build cargo 1.28.0 because rustc tightened the borrow checker rules and broke
+  # backward compatibility, which affects old cargo versions.
+  # There are also issues with asm/llvm_asm with recent rustc and cargo versions prior to 1.39.
+  pname = "cargo";
+  version = "1.39.0";
+  src = fetchurl {
+    url = "https://static.rust-lang.org/dist/rustc-1.39.0-src.tar.gz";
+    sha256 = "0mwkc1bnil2cfyf6nglpvbn2y0zfbv44zfhsd5qg4c9rm6vgd8dl";
+  };
+
+  # the rust source tarball already has all the dependencies vendored, no need to fetch them again
+  cargoVendorDir = "vendor";
+  preBuild = "pushd src/tools/cargo";
+  postBuild = "popd";
+
+  passthru.rustc = rustc;
+
+  # changes hash of vendor directory otherwise
+  dontUpdateAutotoolsGnuConfigScripts = true;
+
+  nativeBuildInputs = [ pkgconfig cmake makeWrapper ];
+  buildInputs = [ cacert file curl python openssl zlib libgit2 ];
+
+  LIBGIT2_SYS_USE_PKG_CONFIG = 1;
+
+  # fixes: the cargo feature `edition` requires a nightly version of Cargo, but this is the `stable` channel
+  RUSTC_BOOTSTRAP = 1;
+
+  postInstall = ''
+    # NOTE: We override the `http.cainfo` option usually specified in
+    # `.cargo/config`. This is an issue when users want to specify
+    # their own certificate chain as environment variables take
+    # precedence
+    wrapProgram "$out/bin/cargo" \
+      --suffix PATH : "${rustc}/bin" \
+      --set CARGO_HTTP_CAINFO "${cacert}/etc/ssl/certs/ca-bundle.crt" \
+      --set SSL_CERT_FILE "${cacert}/etc/ssl/certs/ca-bundle.crt"
+  '';
+
+  checkPhase = ''
+    # Disable cross compilation tests
+    export CFG_DISABLE_CROSS_TESTS=1
+    cargo test
+  '';
+
+  # Disable check phase as there are failures (4 tests fail)
+  doCheck = false;
+
+  meta = with stdenv.lib; {
+    homepage = https://crates.io;
+    description = "Downloads your Rust project's dependencies and builds your project";
+    maintainers = with maintainers; [ wizeman retrry ];
+    license = [ licenses.mit licenses.asl20 ];
+    platforms = platforms.unix;
+  };
+}

artiq-fast/pkgs/rust/patches/disable-test-inherit-env.patch

@@ -0,0 +1,10 @@
+--- rustc-1.26.2-src.org/src/libstd/process.rs	2018-06-01 21:40:11.000000000 +0100
++++ rustc-1.26.2-src/src/libstd/process.rs	2018-06-08 07:50:23.023828658 +0100
+@@ -1745,6 +1745,7 @@
+     }
+ 
+     #[test]
++    #[ignore]
+     fn test_inherit_env() {
+         use env;
+ 

artiq-fast/pkgs/rust/patches/net-tcp-disable-tests.patch

@@ -0,0 +1,104 @@
+diff --git a/src/libstd/net/tcp.rs b/src/libstd/net/tcp.rs
+index 0f60b5b3e..9b08415e7 100644
+--- a/src/libstd/net/tcp.rs
++++ b/src/libstd/net/tcp.rs
+@@ -962,6 +962,7 @@ mod tests {
+         }
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn listen_localhost() {
+         let socket_addr = next_test_ip4();
+@@ -1020,6 +1021,7 @@ mod tests {
+         })
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn read_eof() {
+         each_ip(&mut |addr| {
+@@ -1039,6 +1041,7 @@ mod tests {
+         })
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn write_close() {
+         each_ip(&mut |addr| {
+@@ -1065,6 +1068,7 @@ mod tests {
+         })
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn multiple_connect_serial() {
+         each_ip(&mut |addr| {
+@@ -1087,6 +1091,7 @@ mod tests {
+         })
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn multiple_connect_interleaved_greedy_schedule() {
+         const MAX: usize = 10;
+@@ -1123,6 +1128,7 @@ mod tests {
+     }
+ 
+     #[test]
++    #[cfg_attr(target_os = "macos", ignore)]
+     fn multiple_connect_interleaved_lazy_schedule() {
+         const MAX: usize = 10;
+         each_ip(&mut |addr| {
+@@ -1401,6 +1407,7 @@ mod tests {
+     }
+ 
+     #[test]
++    #[cfg_attr(target_os = "macos", ignore)]
+     fn clone_while_reading() {
+         each_ip(&mut |addr| {
+             let accept = t!(TcpListener::bind(&addr));
+@@ -1421,7 +1422,10 @@ mod tests {
+ 
+     // FIXME: re-enabled bitrig/openbsd tests once their socket timeout code
+     //        no longer has rounding errors.
+-    #[cfg_attr(any(target_os = "bitrig", target_os = "netbsd", target_os = "openbsd"), ignore)]
++    #[cfg_attr(any(target_os = "bitrig",
++                   target_os = "netbsd",
++                   target_os = "openbsd",
++                   target_os = "macos"), ignore)]
+     #[test]
+     fn timeouts() {
+         let addr = next_test_ip4();
+@@ -1596,6 +1603,7 @@ mod tests {
+         drop(listener);
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn nodelay() {
+         let addr = next_test_ip4();
+@@ -1610,6 +1618,7 @@ mod tests {
+         assert_eq!(false, t!(stream.nodelay()));
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn ttl() {
+         let ttl = 100;
+@@ -1647,6 +1656,7 @@ mod tests {
+         }
+     }
+ 
++    #[cfg_attr(target_os = "macos", ignore)]
+     #[test]
+     fn peek() {
+         each_ip(&mut |addr| {
+@@ -1679,6 +1689,7 @@ mod tests {
+     }
+ 
+     #[test]
++    #[cfg_attr(any(target_os = "linux", target_os = "macos"), ignore)]
+     fn connect_timeout_unroutable() {
+         // this IP is unroutable, so connections should always time out,
+         // provided the network is reachable to begin with.

artiq-fast/pkgs/rust/patches/stdsimd-disable-doctest.patch

@@ -0,0 +1,20 @@
+diff --git a/src/stdsimd/coresimd/x86/mod.rs b/src/stdsimd/coresimd/x86/mod.rs
+index 32915c332..7cb54f31e 100644
+--- a/src/stdsimd/coresimd/x86/mod.rs
++++ b/src/stdsimd/coresimd/x86/mod.rs
+@@ -279,7 +279,6 @@ types! {
+     ///
+     /// # Examples
+     ///
+-    /// ```
+     /// # #![feature(cfg_target_feature, target_feature, stdsimd)]
+     /// # #![cfg_attr(not(dox), no_std)]
+     /// # #[cfg(not(dox))]
+@@ -301,7 +300,6 @@ types! {
+     /// # }
+     /// # if is_x86_feature_detected!("sse") { unsafe { foo() } }
+     /// # }
+-    /// ```
+     pub struct __m256(f32, f32, f32, f32, f32, f32, f32, f32);
+ 
+     /// 256-bit wide set of four `f64` types, x86-specific

artiq-fast/pkgs/rust/print-hashes.sh

@@ -0,0 +1,38 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+# All rust-related downloads can be found at
+# https://static.rust-lang.org/dist/index.html.  To find the date on
+# which a particular thing was last updated, look for the *-date.txt
+# file, e.g.
+# https://static.rust-lang.org/dist/channel-rust-beta-date.txt
+
+PLATFORMS=(
+  i686-unknown-linux-gnu
+  x86_64-unknown-linux-gnu
+  armv7-unknown-linux-gnueabihf
+  aarch64-unknown-linux-gnu
+  i686-apple-darwin
+  x86_64-apple-darwin
+)
+BASEURL=https://static.rust-lang.org/dist
+VERSION=${1:-}
+DATE=${2:-}
+
+if [[ -z $VERSION ]]
+then
+    echo "No version supplied"
+    exit -1
+fi
+
+if [[ -n $DATE ]]
+then
+    BASEURL=$BASEURL/$DATE
+fi
+
+for PLATFORM in "${PLATFORMS[@]}"
+do
+    URL="$BASEURL/rust-$VERSION-$PLATFORM.tar.gz.sha256"
+    SHA256=$(curl -sSfL $URL | cut -d ' ' -f 1)
+    echo "$PLATFORM = \"$SHA256\";"
+done

artiq-fast/pkgs/rust/rustc-with-crates.nix

@@ -0,0 +1,95 @@
+{ stdenv, callPackage, recurseIntoAttrs, makeRustPlatform, llvm-or1k, fetchurl
+, targets ? []
+, targetToolchains ? []
+, targetPatches ? []
+, fetchFromGitHub
+, runCommand
+}:
+
+let
+  rustPlatform = recurseIntoAttrs (makeRustPlatform (callPackage ./bootstrap.nix {}));
+  version = "1.28.0";
+  src = fetchFromGitHub {
+    owner = "m-labs";
+    repo = "rust";
+    sha256 = "03lfps3xvvv7wv1nnwn3n1ji13z099vx8c3fpbzp9rnasrwzp5jy";
+    rev = "f305fb024318e96997fbe6e4a105b0cc1052aad4"; #  artiq-1.28.0 branch
+    fetchSubmodules = true;
+  };
+  rustc_internal = callPackage ./rustc.nix {
+    inherit stdenv llvm-or1k targets targetPatches targetToolchains rustPlatform version src;
+
+    patches = [
+      ./patches/net-tcp-disable-tests.patch
+
+      # Re-evaluate if this we need to disable this one
+      #./patches/stdsimd-disable-doctest.patch
+
+      # Fails on hydra - not locally; the exact reason is unknown.
+      # Comments in the test suggest that some non-reproducible environment
+      # variables such $RANDOM can make it fail.
+      ./patches/disable-test-inherit-env.patch
+    ];
+
+    #configureFlags = [ "--release-channel=stable" ];
+
+    # 1. Upstream is not running tests on aarch64:
+    # see https://github.com/rust-lang/rust/issues/49807#issuecomment-380860567
+    # So we do the same.
+    # 2. Tests run out of memory for i686
+    #doCheck = !stdenv.isAarch64 && !stdenv.isi686;
+
+    # Disabled for now; see https://github.com/NixOS/nixpkgs/pull/42348#issuecomment-402115598.
+    doCheck = false;
+  };
+  or1k-crates = stdenv.mkDerivation {
+    name = "or1k-crates";
+    inherit src;
+    phases = [ "unpackPhase" "buildPhase" ];
+    buildPhase = ''
+      destdir=$out
+      rustc="${rustc_internal}/bin/rustc --out-dir ''${destdir} -L ''${destdir} --target or1k-unknown-none -g -C target-feature=+mul,+div,+ffl1,+cmov,+addc -C opt-level=s --crate-type rlib"
+      
+      mkdir -p ''${destdir}
+      ''${rustc} --crate-name core src/libcore/lib.rs
+      ''${rustc} --crate-name compiler_builtins src/libcompiler_builtins/src/lib.rs --cfg 'feature="compiler-builtins"' --cfg 'feature="mem"'
+      ''${rustc} --crate-name std_unicode src/libstd_unicode/lib.rs
+      ''${rustc} --crate-name alloc src/liballoc/lib.rs
+      ''${rustc} --crate-name libc src/liblibc_mini/lib.rs
+      ''${rustc} --crate-name unwind src/libunwind/lib.rs
+      ''${rustc} -Cpanic=abort --crate-name panic_abort src/libpanic_abort/lib.rs
+      ''${rustc} -Cpanic=unwind --crate-name panic_unwind src/libpanic_unwind/lib.rs --cfg llvm_libunwind
+    '';
+  };
+  arm-crates = stdenv.mkDerivation {
+    name = "arm-crates";
+    inherit src;
+    phases = [ "unpackPhase" "buildPhase" ];
+    buildPhase = ''
+      destdir=$out
+      rustc="${rustc_internal}/bin/rustc --out-dir ''${destdir} -L ''${destdir} --target armv7-unknown-linux-gnueabihf -g -C target-feature=+dsp,+fp16,+neon,+vfp3 -C opt-level=s --crate-type rlib"
+
+      mkdir -p ''${destdir}
+      ''${rustc} --crate-name core src/libcore/lib.rs
+      ''${rustc} --crate-name compiler_builtins src/libcompiler_builtins/src/lib.rs --cfg 'feature="compiler-builtins"' --cfg 'feature="mem"'
+      ''${rustc} --crate-name std_unicode src/libstd_unicode/lib.rs
+      ''${rustc} --crate-name alloc src/liballoc/lib.rs
+      ''${rustc} --crate-name libc src/liblibc_mini/lib.rs
+      ''${rustc} --crate-name unwind src/libunwind/lib.rs
+      ''${rustc} -Cpanic=abort --crate-name panic_abort src/libpanic_abort/lib.rs
+      ''${rustc} -Cpanic=unwind --crate-name panic_unwind src/libpanic_unwind/lib.rs --cfg llvm_libunwind
+    '';
+  };
+in
+  stdenv.mkDerivation {
+    name = "rustc";
+    inherit src version;
+    buildCommand = ''
+      mkdir -p $out/lib/rustlib/or1k-unknown-none/lib/
+      cp -r ${or1k-crates}/* $out/lib/rustlib/or1k-unknown-none/lib/
+      mkdir -p $out/lib/rustlib/armv7-unknown-linux-gnueabihf/lib/
+      cp -r ${arm-crates}/* $out/lib/rustlib/armv7-unknown-linux-gnueabihf/lib/
+      cp -r ${rustc_internal}/* $out
+      '';
+    passAsFile = [ "buildCommand" ];
+  }

artiq-fast/pkgs/rust/rustc.nix

@@ -0,0 +1,182 @@
+{ stdenv, targetPackages
+, fetchurl, file, python2, tzdata, ps
+, llvm-or1k, ncurses, zlib, darwin, rustPlatform, git, cmake, curl
+, which, libffi, gdb
+, version
+, src
+, configureFlags ? []
+, patches
+, targets
+, targetPatches
+, targetToolchains
+, doCheck ? true
+, broken ? false
+}:
+
+let
+  inherit (stdenv.lib) optional optionalString;
+  inherit (darwin.apple_sdk.frameworks) Security;
+
+  target = builtins.replaceStrings [" "] [","] (builtins.toString targets);
+  src_rustc = fetchurl {
+    url = "https://static.rust-lang.org/dist/rustc-1.28.0-src.tar.gz";
+    sha256 = "11k4rn77bca2rikykkk9fmprrgjswd4x4kaq7fia08vgkir82nhx";
+  };
+
+in
+
+stdenv.mkDerivation {
+  pname = "rustc";
+  inherit version;
+
+  inherit src;
+
+  __darwinAllowLocalNetworking = true;
+
+  # rustc complains about modified source files otherwise
+  dontUpdateAutotoolsGnuConfigScripts = true;
+
+  # Running the default `strip -S` command on Darwin corrupts the
+  # .rlib files in "lib/".
+  #
+  # See https://github.com/NixOS/nixpkgs/pull/34227
+  stripDebugList = if stdenv.isDarwin then [ "bin" ] else null;
+
+  NIX_LDFLAGS = optionalString stdenv.isDarwin "-rpath ${llvm-or1k}/lib";
+
+  # Enable nightly features in stable compiles (used for
+  # bootstrapping, see https://github.com/rust-lang/rust/pull/37265).
+  # This loosens the hard restrictions on bootstrapping-compiler
+  # versions.
+  RUSTC_BOOTSTRAP = "1";
+
+  # Increase codegen units to introduce parallelism within the compiler.
+  RUSTFLAGS = "-Ccodegen-units=10";
+
+  # We need rust to build rust. If we don't provide it, configure will try to download it.
+  # Reference: https://github.com/rust-lang/rust/blob/master/src/bootstrap/configure.py
+  configureFlags = configureFlags
+                ++ [ "--enable-local-rust" "--local-rust-root=${rustPlatform.rust.rustc}" "--enable-rpath" ]
+                ++ [ "--enable-vendor" ]
+                ++ [ "--default-linker=${targetPackages.stdenv.cc}/bin/cc" ]
+                ++ [ "--enable-llvm-link-shared" ]
+                ++ optional (targets != []) "--target=${target}"
+                ++ [ "--llvm-root=${llvm-or1k}" ] ;
+
+  # The bootstrap.py will generated a Makefile that then executes the build.
+  # The BOOTSTRAP_ARGS used by this Makefile must include all flags to pass
+  # to the bootstrap builder.
+  postConfigure = ''
+    substituteInPlace Makefile --replace 'BOOTSTRAP_ARGS :=' 'BOOTSTRAP_ARGS := --jobs $(NIX_BUILD_CORES)'
+  '';
+
+  # FIXME: qknight, readd deleted vendor folder from 1.28 rustc
+  preConfigure = ''
+    export HOME=$out
+    # HACK: we add the vendor folder from rustc 1.28 to make the compiling work
+    tar xf ${src_rustc}
+    mv rustc-1.28.0-src/src/vendor/ src/vendor
+  '';
+
+  patches = patches ++ targetPatches;
+
+  # the rust build system complains that nix alters the checksums
+  dontFixLibtool = true;
+
+  passthru.target = target;
+
+  postPatch = ''
+    patchShebangs src/etc
+
+    # Fix the configure script to not require curl as we won't use it
+    sed -i configure \
+      -e '/probe_need CFG_CURL curl/d'
+
+    # Disable fragile tests.
+    rm -vr src/test/run-make/linker-output-non-utf8 || true
+    rm -vr src/test/run-make/issue-26092 || true
+
+    # Remove test targeted at LLVM 3.9 - https://github.com/rust-lang/rust/issues/36835
+    rm -vr src/test/run-pass/issue-36023.rs || true
+
+    # Disable test getting stuck on hydra - possible fix:
+    # https://reviews.llvm.org/rL281650
+    rm -vr src/test/run-pass/issue-36474.rs || true
+
+    # On Hydra: `TcpListener::bind(&addr)`: Address already in use (os error 98)'
+    sed '/^ *fn fast_rebind()/i#[ignore]' -i src/libstd/net/tcp.rs
+
+    # https://github.com/rust-lang/rust/issues/39522
+    echo removing gdb-version-sensitive tests...
+    find src/test/debuginfo -type f -execdir grep -q ignore-gdb-version '{}' \; -print -delete
+    rm src/test/debuginfo/{borrowed-c-style-enum.rs,c-style-enum-in-composite.rs,gdb-pretty-struct-and-enums-pre-gdb-7-7.rs,generic-enum-with-different-disr-sizes.rs}
+
+    # Useful debugging parameter
+    # export VERBOSE=1
+  '' + optionalString stdenv.isDarwin ''
+    # Disable all lldb tests.
+    # error: Can't run LLDB test because LLDB's python path is not set
+    rm -vr src/test/debuginfo/*
+    rm -v src/test/run-pass/backtrace-debuginfo.rs
+
+    # error: No such file or directory
+    rm -v src/test/run-pass/issue-45731.rs
+
+    # Disable tests that fail when sandboxing is enabled.
+    substituteInPlace src/libstd/sys/unix/ext/net.rs \
+        --replace '#[test]' '#[test] #[ignore]'
+    substituteInPlace src/test/run-pass/env-home-dir.rs \
+        --replace 'home_dir().is_some()' true
+    rm -v src/test/run-pass/fds-are-cloexec.rs  # FIXME: pipes?
+    rm -v src/test/run-pass/sync-send-in-std.rs  # FIXME: ???
+  '';
+
+  # rustc unfortunately need cmake for compiling llvm-rt but doesn't
+  # use it for the normal build. This disables cmake in Nix.
+  dontUseCmakeConfigure = true;
+
+  # ps is needed for one of the test cases
+  nativeBuildInputs =
+    [ file python2 ps rustPlatform.rust.rustc git cmake
+      which libffi
+    ]
+    # Only needed for the debuginfo tests
+    ++ optional (!stdenv.isDarwin) gdb;
+
+  buildInputs = [ ncurses zlib llvm-or1k ] ++ targetToolchains
+    ++ optional stdenv.isDarwin Security;
+
+  outputs = [ "out" "man" "doc" ];
+  setOutputFlags = false;
+
+  # Disable codegen units and hardening for the tests.
+  preCheck = ''
+    export RUSTFLAGS=
+    export TZDIR=${tzdata}/share/zoneinfo
+    export hardeningDisable=all
+  '' +
+  # Ensure TMPDIR is set, and disable a test that removing the HOME
+  # variable from the environment falls back to another home
+  # directory.
+  optionalString stdenv.isDarwin ''
+    export TMPDIR=/tmp
+    sed -i '28s/home_dir().is_some()/true/' ./src/test/run-pass/env-home-dir.rs
+  '';
+
+  inherit doCheck;
+
+  configurePlatforms = [];
+
+  # https://github.com/NixOS/nixpkgs/pull/21742#issuecomment-272305764
+  # https://github.com/rust-lang/rust/issues/30181
+  # enableParallelBuilding = false;
+
+  meta = with stdenv.lib; {
+    homepage = https://www.rust-lang.org/;
+    description = "A safe, concurrent, practical language";
+    maintainers = with maintainers; [ sb0 ];
+    license = [ licenses.mit licenses.asl20 ];
+    platforms = platforms.linux ++ platforms.darwin;
+    broken = broken;
+  };
+}

artiq-fast/shell-dev.nix

@@ -0,0 +1,20 @@
+{ pkgs ? import <nixpkgs> {}}:
+
+let
+  artiqpkgs = import ./default.nix { inherit pkgs; };
+  vivado = import ./vivado.nix { inherit pkgs; };
+in
+  pkgs.mkShell {
+    buildInputs = [
+      vivado
+      pkgs.gnumake
+      (pkgs.python3.withPackages(ps: (with ps; [ jinja2 jsonschema numpy paramiko ]) ++ (with artiqpkgs; [ migen microscope misoc jesd204b migen-axi artiq ])))
+      artiqpkgs.cargo
+      artiqpkgs.rustc
+      artiqpkgs.binutils-or1k
+      artiqpkgs.binutils-arm
+      artiqpkgs.llvm-or1k
+      artiqpkgs.openocd
+    ];
+    TARGET_AR="or1k-linux-ar";
+  }

artiq-fast/shell.nix

@@ -0,0 +1,8 @@
+{ pkgs ? import <nixpkgs> {}}:
+
+let 
+  artiqpkgs = import ./default.nix { inherit pkgs; };
+in
+  pkgs.mkShell {
+    buildInputs = [ (pkgs.python3.withPackages(ps: [artiqpkgs.artiq])) ];
+  }

artiq-fast/vivado.nix

@@ -0,0 +1,24 @@
+# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
+#  nix.sandboxPaths = ["/opt"];
+
+{ pkgs, vivadoPath ? "/opt/Xilinx/Vivado/2020.1" }:
+
+pkgs.buildFHSUserEnv {
+  name = "vivado";
+  targetPkgs = pkgs: (
+    with pkgs; [
+      ncurses5
+      zlib
+      libuuid
+      xorg.libSM
+      xorg.libICE
+      xorg.libXrender
+      xorg.libX11
+      xorg.libXext
+      xorg.libXtst
+      xorg.libXi
+    ]
+  );
+  profile = "source ${vivadoPath}/settings64.sh";
+  runScript = "vivado";
+}

artiq-fast/wfvm.nix

@@ -0,0 +1,16 @@
+{ pkgs }:
+
+let
+  # Pin nixpkgs to avoid frequent resource-intensive Windows reinstallations on Hydra.
+  wfvm-pkgs = pkgs.fetchFromGitHub {
+    owner = "NixOS";
+    repo = "nixpkgs";
+    rev = "f8248ab6d9e69ea9c07950d73d48807ec595e923";
+    sha256 = "009i9j6mbq6i481088jllblgdnci105b2q4mscprdawg3knlyahk";
+  };
+  wfvm = pkgs.fetchgit {
+    url = "https://git.m-labs.hk/M-Labs/wfvm.git";
+    rev = "4b497938ffd9fcddf84a3dbe2f01524395292adb";
+    sha256 = "0m3kdbbcskqc1lf8b5f7ccbll9b7vkl4r00kbyx3yjb2rs6cqvil";
+  };
+in import "${wfvm}/wfvm" { pkgs = (import wfvm-pkgs {}); }

artiq-fast/windows/conda_noarch_packages-legacy.nix

@@ -0,0 +1,17 @@
+{ pkgs } : [
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/noarch/prettytable-0.7.2-py_3.tar.bz2";
+  sha256 = "0b7s4xm6bbkcg37sf1i3mxrbac0vxhryq22m3qx4x9kh6k2c5g5q";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/noarch/pycparser-2.20-py_0.tar.bz2";
+  sha256 = "1qwcb07q8cjz0qpj6pfxb0qb68kddmx9bv9wr5pghwz78q8073z9";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/noarch/six-1.15.0-py_0.tar.bz2";
+  sha256 = "08rsfp9bd2mz8r120s8w5vgncy0gn732xa0lfgbmx833548cfqmb";
+})
+]

artiq-fast/windows/conda_noarch_packages.nix

@@ -0,0 +1,27 @@
+{ pkgs } : [
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/noarch/prettytable-0.7.2-py_3.tar.bz2";
+  sha256 = "0b7s4xm6bbkcg37sf1i3mxrbac0vxhryq22m3qx4x9kh6k2c5g5q";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/noarch/six-1.15.0-py_0.tar.bz2";
+  sha256 = "08rsfp9bd2mz8r120s8w5vgncy0gn732xa0lfgbmx833548cfqmb";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/noarch/python-dateutil-2.8.1-py_0.tar.bz2";
+  sha256 = "0cbcd0jq6683ibj8ncsmmrbhbjvwww8i22lb68bx4xfzsmb9z8cb";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/noarch/cached-property-1.5.1-py_1.tar.bz2";
+  sha256 = "1yl6h3wb6hxgw79i7rpgpq260l5vqfcj5dv5kyxn8z99xdkp52q5";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/noarch/pycparser-2.20-py_0.tar.bz2";
+  sha256 = "1qwcb07q8cjz0qpj6pfxb0qb68kddmx9bv9wr5pghwz78q8073z9";
+})
+]

artiq-fast/windows/conda_win-64_packages-legacy.nix

@@ -0,0 +1,167 @@
+{ pkgs } : [
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/pyqt-5.9.2-py35h6538335_2.tar.bz2";
+  sha256 = "1anwq53nic50cijngxaylpn6232j9wdc2wz2rykqpgzvs1ms108s";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/zlib-1.2.11-h62dcd97_4.tar.bz2";
+  sha256 = "1jxd7sg0c278hqv09q6hridpdnyhkd34gbs92wkravj3gwsr1adk";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/openssl-1.1.1g-he774522_0.tar.bz2";
+  sha256 = "1gwfj33qb8inikdhmgcm30iz1ag8x71lzicsxbdr7ni4153df5gb";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_random-1.0.1-py35h77b88f5_1.tar.bz2";
+  sha256 = "0899qg9ih8srpw9q5mxd85hg4gpawb7lmz25x9xi401cfwhgwq7l";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/hdf5-1.10.2-hac2f561_1.tar.bz2";
+  sha256 = "0l1i5bpxl0bn9hf738ywygjwc32d4cq5fjkgzij3x27cxi8nvd21";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/tbb4py-2018.0.5-py35he980bc4_0.tar.bz2";
+  sha256 = "0gypjcmciw3rnd2cq0sqmvspgzaas13fghv633dqj8g3bvl4lfif";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/wheel-0.31.1-py35_0.tar.bz2";
+  sha256 = "07zmbg57lpvqd9nmahiff1mhzxmzchx1v128dcrj4iamymjcdlzf";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
+  sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
+})
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/win-64/pygit2-0.27.1-py35hfa6e2cd_0.tar.bz2";
+  sha256 = "1jypm8vxs4j4yr37ai4ki9qsslv3wz6slklmisnvjraz1a4vzaf8";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/pip-10.0.1-py35_0.tar.bz2";
+  sha256 = "0zwlkfgnag1s64wbwdcg44zqj2dpfcq1g4b6dsk82q24j7fw40i3";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/h5py-2.8.0-py35h3bdd7fb_2.tar.bz2";
+  sha256 = "0743wrf51b2vs8ybasjpn7ricbh740r7drxcimkhbxp8r6vd66vp";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-1.15.2-py35ha559c80_0.tar.bz2";
+  sha256 = "1igf4gm726s4kg7km24flxdxr73fafaz3z18y3ndcb5f6r9zwa44";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl-2018.0.3-1.tar.bz2";
+  sha256 = "01pq0f2787q58avg5ylfrbpf4jlg2b6rbajvf3swjpm1cmzxkm81";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/libssh2-1.9.0-h7a1dbc1_1.tar.bz2";
+  sha256 = "0sz405ab3n7991hxy8l9affs1slivsimgadxsdr6wvpgx3j4aqgx";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/tk-8.6.10-he774522_0.tar.bz2";
+  sha256 = "15bfncacdxmcbn4xixmfz2m7a09k7hcpwxvwn1lki84bx0fmzsis";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/sqlite-3.32.2-h2a8f88b_0.tar.bz2";
+  sha256 = "086jjnxfchypkr8cp1q8nsis0jfvl293bv4bcg7ikv7aia3vda8p";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/wincertstore-0.2-py35hfebbdb8_0.tar.bz2";
+  sha256 = "1624bzqlbiq4jlz46l65574smw739p7l38ydzxmayq3jmwx6zaar";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/certifi-2018.8.24-py35_1.tar.bz2";
+  sha256 = "06ygpkx3f71rwmq9lgc29r6jj4g1zi8rvrmn4mrrsb9b5sf0rzgf";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/icu-58.2-ha925a31_3.tar.bz2";
+  sha256 = "0vcl0j3v9ab022s2g3a9iv1pn7sflh670yyf5m08hdyf049m3jz7";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/regex-2018.08.29-py35hfa6e2cd_0.tar.bz2";
+  sha256 = "16cjgwpaqnfy8bg35iz12bb9whpws4abiz4cq4shpnh6gnwpwzj3";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/cffi-1.11.5-py35h74b6da3_1.tar.bz2";
+  sha256 = "0nc3ps4xl8rqpwiqaqqr5lrqzk8lx1a4hh3fpm7i7rlppqn5pm6a";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/libcurl-7.69.1-h2a8f88b_0.tar.bz2";
+  sha256 = "182zrmgl2142gfgnbgjsk0gbj85vw75xzxvhn9lzm485ghxsasvg";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_fft-1.0.6-py35hdbbee80_0.tar.bz2";
+  sha256 = "0xb02rx28rjlp5clavg19jb129ihcarrkz46pncaar91qxckbbxz";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/pyqtgraph-0.10.0-py35h28b3542_3.tar.bz2";
+  sha256 = "0ywzw3i4kf5ccck9whmg1j7s22x6i5fpywndy8rkr9va38g4nazq";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/sip-4.19.8-py35h6538335_0.tar.bz2";
+  sha256 = "1y761zpm6bi0pb61x1y26ap56hylh6mjg1xq9zl08bmcl2dlkwfy";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/setuptools-40.2.0-py35_0.tar.bz2";
+  sha256 = "146piyifnip1flqph19nxilnhfbzzsxlhfyx0i61wv7krr6ln9yy";
+})
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/win-64/python-levenshtein-0.12.0-py35_0.tar.bz2";
+  sha256 = "1rdpzv1y535swf17nm88chkp1m8w3wd3nwdy7jk1xfcnx1da5ss6";
+})
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/win-64/libgit2-0.27.8-hfac1375_0.tar.bz2";
+  sha256 = "05pjzwmm5vyxwcgi6vv3i961x3dgdd9c4b1ihagq9kyxgqfy21kd";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/scipy-1.1.0-py35h4f6bf74_1.tar.bz2";
+  sha256 = "0sdyj5nlycv4krz7f8rzhi0kxv302gpx65x1zwhj8dn6b2c50li0";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/curl-7.69.1-h2a8f88b_0.tar.bz2";
+  sha256 = "0hw5dh7gzx8fap4c3vkc2xc2q9by3f5ndbigr6pm6w5v29qaydn4";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/intel-openmp-2019.4-245.tar.bz2";
+  sha256 = "13qid5aagyxsfy5ng4bbwb7hs9jj29jvqbpvvkjiy6bgv36m8kr8";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-base-1.15.2-py35h8128ebf_0.tar.bz2";
+  sha256 = "166w4wkp9dwl505hc00hny1mq2mlvb169n7c9nws7dz8j36pqfrx";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/python-3.5.6-he025d50_0.tar.bz2";
+  sha256 = "0ygvmbyvhc2jisb5bzb0r5709qmn8392gr7rv6c8vrdiylfiqr73";
+})
+]

artiq-fast/windows/conda_win-64_packages.nix

@@ -0,0 +1,132 @@
+{ pkgs } : [
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/regex-2020.5.14-py37he774522_0.tar.bz2";
+  sha256 = "125l0ywc17h5hlpidjbr7dxyz9c24xmfjllj19dmvbx8hdlmvp99";
+})
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/win-64/python_abi-3.7-1_cp37m.tar.bz2";
+  sha256 = "04dllvrvczky7p7d82iqj7czmy5mm8w7h2gg0zpjzx0s09gkq09l";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/icu-58.2-ha925a31_3.tar.bz2";
+  sha256 = "0vcl0j3v9ab022s2g3a9iv1pn7sflh670yyf5m08hdyf049m3jz7";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/pip-20.1.1-py37_1.tar.bz2";
+  sha256 = "0wx0sdjq2kkdid4m0iss1bxjhpdk1lnrqsl3w7bqc0papz3gbx0a";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_fft-1.1.0-py37h45dec08_0.tar.bz2";
+  sha256 = "1v73rd107x1r77gv77cn2bv50hr15c0rwspzf7pdp93i5ydk7fm0";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/tk-8.6.10-he774522_0.tar.bz2";
+  sha256 = "15bfncacdxmcbn4xixmfz2m7a09k7hcpwxvwn1lki84bx0fmzsis";
+})
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/win-64/pygit2-1.2.1-py37h4ab8f01_0.tar.bz2";
+  sha256 = "1rj6bmf56g3imcrhfd67nqfzd5jjpnmbck714p6aqljxjw5x1zja";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/certifi-2020.6.20-py37_0.tar.bz2";
+  sha256 = "0601dwm5grhwnq7kvhz9sr49pw72ji8xbc28jc6z3pzihin243fy";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/libssh2-1.9.0-h7a1dbc1_1.tar.bz2";
+  sha256 = "0sz405ab3n7991hxy8l9affs1slivsimgadxsdr6wvpgx3j4aqgx";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
+  sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/intel-openmp-2020.1-216.tar.bz2";
+  sha256 = "097kkdpd27gc5v5fwsanbrpvmkqricbkd2igglz0yym0x2rldgb8";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/zlib-1.2.11-h62dcd97_4.tar.bz2";
+  sha256 = "1jxd7sg0c278hqv09q6hridpdnyhkd34gbs92wkravj3gwsr1adk";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/pyqtgraph-0.10.0-py37h28b3542_3.tar.bz2";
+  sha256 = "1vfxym7lpiv624ll82yp07v2906chdzvczjj9xbvfvk2sk0w1nk7";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/python-levenshtein-0.12.0-py37he774522_1001.tar.bz2";
+  sha256 = "0wgk6wi4hcc1msv6467y8rhd3zpxrlb6dc0a4fg5wrvzww9wh4dx";
+})
+
+(pkgs.fetchurl {
+  url = "https://conda.anaconda.org/conda-forge/win-64/libgit2-1.0.0-h79a9ecc_0.tar.bz2";
+  sha256 = "1pi4hd4kah49wzy00iml5wpbscc0lx6ljk6lwnx92gas5z8856jd";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/setuptools-47.3.1-py37_0.tar.bz2";
+  sha256 = "1lljknly57bh73h30hn6vv826dx4vls736psa9jvf0d6l2kqrzrq";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/libcurl-7.69.1-h2a8f88b_0.tar.bz2";
+  sha256 = "182zrmgl2142gfgnbgjsk0gbj85vw75xzxvhn9lzm485ghxsasvg";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_random-1.1.1-py37h47e9c7a_0.tar.bz2";
+  sha256 = "1f85bd7rrzdprgmk83v1klana32j016128fkxk8kpk7idfd36zqv";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/python-3.7.7-h81c818b_4.tar.bz2";
+  sha256 = "092bv939n68yjkcm7q626nd6s5kqqvdrgjfqn1nadnqig612w2p9";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/curl-7.69.1-h2a8f88b_0.tar.bz2";
+  sha256 = "0hw5dh7gzx8fap4c3vkc2xc2q9by3f5ndbigr6pm6w5v29qaydn4";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/openssl-1.1.1g-he774522_0.tar.bz2";
+  sha256 = "1gwfj33qb8inikdhmgcm30iz1ag8x71lzicsxbdr7ni4153df5gb";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/scipy-1.5.0-py37h9439919_0.tar.bz2";
+  sha256 = "01pj0a82y9qd9z5fn5gv4argcc5g5s8kqj0lwjy9hj50qf6qwj76";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-1.18.5-py37h6530119_0.tar.bz2";
+  sha256 = "1knb5na7ij7ik76blsgwhdsy3i9r2l0154z5g5dkb2ds3sk878np";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/sqlite-3.32.3-h2a8f88b_0.tar.bz2";
+  sha256 = "1ddzwj0f6jikj6hsasg3vlwamsqhf5lc8k1la7gqbd77s11b8isc";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-base-1.18.5-py37hc3f5095_0.tar.bz2";
+  sha256 = "1dyxk2v7rm87najv3f8i04q44wxicfx9qrap9dy2vpqlrz3bj82j";
+})
+
+(pkgs.fetchurl {
+  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl-2020.1-216.tar.bz2";
+  sha256 = "1klj0sjlj5x1anjbkf017f16ssc65dkpg1rrn06njirbhwsc9w5m";
+})
+]

artiq-fast/windows/make_conda_packages.sh

@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+
+# Run manually to build the list of conda dependencies to install in the
+# test environments.
+
+# NOTE: This procedure encounters failing HTTPS handshakes. To circumvent just
+# for testing, insert `call conda config --set ssl_verify no` into
+# getcondapackages.bat. To securely update the sources lists update the RTC
+# hack to the proper date instead.
+
+set -e
+
+nix-build -E "
+let
+  pkgs = import <nixpkgs> {};
+  wfvm = import ../wfvm.nix { inherit pkgs; };
+in
+  wfvm.utils.wfvm-run {
+    name = \"get-conda-packages\";
+    image = wfvm.makeWindowsImage { installCommands = [ wfvm.layers.anaconda3 ]; };
+    # TODO: fix wfvm login expiry and also remove 'date' workarounds below
+    #fakeRtc = false;
+    isolateNetwork = false;
+    script = ''
+      cat > getcondapackages.bat << EOF
+      date 06-22-20
+      call conda config --prepend channels https://conda.m-labs.hk/artiq-beta
+      call conda config --append channels conda-forge
+      call conda create -n artiq -y
+      call conda install --dry-run --json -n artiq artiq > packages.json
+      date 04-20-20
+      EOF
+      \${wfvm.utils.win-put}/bin/win-put getcondapackages.bat
+      \${wfvm.utils.win-exec}/bin/win-exec '.\Anaconda3\Scripts\activate && getcondapackages'
+      \${wfvm.utils.win-get}/bin/win-get packages.json
+    '';
+  }
+"
+
+./result/bin/wfvm-run-get-conda-packages
+
+python -c "
+import json
+
+with open('packages.json') as json_file:
+    packages = json.load(json_file)
+
+with open('packages_noarch.txt', 'w') as list_noarch:
+    with open('packages_win-64.txt', 'w') as list_win64:
+        for fetch in packages['actions']['FETCH']:
+            if 'm-labs' not in fetch['channel']:
+                if fetch['subdir'] == 'noarch':
+                    list = list_noarch
+                elif fetch['subdir'] == 'win-64':
+                    list = list_win64
+                else:
+                    raise ValueError
+                url = fetch['url']
+                if url.endswith('.conda'):
+                  url = url[:-6] + '.tar.bz2'
+                print(url, file=list)
+"
+
+for type in "noarch" "win-64"; do
+  echo Downloading $type packages
+  out=conda_$type\_packages.nix
+  echo "{ pkgs } : [" > $out
+  while read package; do
+    hash=$(nix-prefetch-url $package)
+    echo "
+(pkgs.fetchurl {
+  url = \"$package\";
+  sha256 = \"$hash\";
+})" >> $out
+  done < packages_$type.txt
+  echo "]" >> $out
+done
+
+rm result getcondapackages.bat packages.json packages_noarch.txt packages_win-64.txt

artiq-fast/windows/manual-test-run.nix

@@ -0,0 +1,10 @@
+{ pkgs ? import <nixpkgs> {} }:
+
+let
+  artiqpkgs = import ../. { inherit pkgs; };
+  run-test = import ./run-test.nix {
+    inherit pkgs artiqpkgs;
+    testCommand = "set ARTIQ_ROOT=%cd%\\Anaconda3\\envs\\artiq-env\\Lib\\site-packages\\artiq\\examples\\kc705_nist_clock&& python -m unittest discover -v sipyco.test && python -m unittest discover -v artiq.test";
+  };
+in
+  run-test

artiq-fast/windows/run-test.nix

@@ -0,0 +1,60 @@
+{ pkgs, artiqpkgs, testCommand, testTimeout ? 600 }:
+
+let
+  condaEnv = "artiq-env";
+  tcpPorts = [ 1380 1381 1382 1383 ];
+  forwardedPorts =
+    map (port: {
+      listenAddr = "192.168.1.50";
+      targetAddr = "192.168.1.50";
+      inherit port;
+    }) tcpPorts;
+
+  wfvm = import ../wfvm.nix { inherit pkgs; };
+  conda-deps = {
+    name = "conda-deps";
+    script = let
+      artiq6 = pkgs.lib.strings.versionAtLeast artiqpkgs.artiq.version "6.0";
+      qt-asyncio-package = if artiq6 then artiqpkgs.conda-qasync else artiqpkgs.conda-quamash;
+      conda-deps-noarch = import (if artiq6 then ./conda_noarch_packages.nix else ./conda_noarch_packages-legacy.nix) { inherit pkgs; };
+      conda-deps-win-64 = import (if artiq6 then ./conda_win-64_packages.nix else ./conda_win-64_packages-legacy.nix) { inherit pkgs; };
+      conda-packages-put = pkgs.lib.strings.concatStringsSep "\n"
+          ( (map (package: ''win-put ${package} 'fake-channel/noarch' '') conda-deps-noarch)
+             ++ (map (package: ''win-put ${package} 'fake-channel/win-64' '') conda-deps-win-64) );
+    in
+      ''
+      win-exec 'mkdir fake-channel && mkdir fake-channel\noarch && mkdir fake-channel\win-64'
+
+      ${conda-packages-put}
+
+      win-put ${artiqpkgs.conda-windows-binutils-or1k}/win-64/*.tar.bz2 'fake-channel/win-64'
+      win-put ${artiqpkgs.conda-windows-llvm-or1k}/win-64/*.tar.bz2 'fake-channel/win-64'
+      win-put ${artiqpkgs.conda-windows-llvmlite-artiq}/win-64/*.tar.bz2 'fake-channel/win-64'
+
+      win-put ${artiqpkgs.conda-pythonparser}/noarch/*.tar.bz2 'fake-channel/noarch'
+      win-put ${artiqpkgs.conda-sipyco}/noarch/*.tar.bz2 'fake-channel/noarch'
+      win-put ${qt-asyncio-package}/noarch/*.tar.bz2 'fake-channel/noarch'
+      '';
+  };
+in
+  wfvm.utils.wfvm-run {
+    name = "windows-tests";
+    image = wfvm.makeWindowsImage { installCommands = [ wfvm.layers.anaconda3 conda-deps ]; };
+    inherit forwardedPorts;
+    script =
+      ''
+      ${wfvm.utils.win-put}/bin/win-put ${artiqpkgs.conda-artiq}/noarch/*.tar.bz2 'fake-channel/noarch'
+
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda create -n ${condaEnv} --offline"
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate ${condaEnv} && conda install -y -c file:///C:/users/wfvm/fake-channel --offline artiq"\
+
+      # Schedule a timed shutdown against hanging test runs
+      ${wfvm.utils.win-exec}/bin/win-exec "shutdown -s -t ${toString testTimeout}"
+
+      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate ${condaEnv} && ${testCommand}"
+
+      # Abort timeouted shutdown
+      ${wfvm.utils.win-exec}/bin/win-exec "shutdown -a"
+      '';
+  }

artiq-full.nix

@@ -0,0 +1,247 @@
+{ pkgs ? import <nixpkgs> {}
+, beta ? <beta>
+}:
+
+let
+  sinaraSystemsRev = builtins.readFile <artiq-board-generated/sinara-rev.txt>;
+  sinaraSystemsHash = builtins.readFile <artiq-board-generated/sinara-hash.txt>;
+  sinaraSystemsSrc =
+    if beta
+    then pkgs.fetchgit {
+      url = "https://git.m-labs.hk/M-Labs/sinara-systems.git";
+      rev = sinaraSystemsRev;
+      sha256 = sinaraSystemsHash;
+    }
+    else <sinaraSystemsSrc>;
+  artiq-fast =
+    if beta
+    then <artiq-board-generated/fast>
+    else <artiq-fast>;
+  artiqVersion = import (artiq-fast + "/pkgs/artiq-version.nix") {
+    inherit (pkgs) stdenv git fetchgit;
+  };
+  targets = import ./artiq-full/artiq-targets.nix {
+    inherit pkgs artiqVersion sinaraSystemsSrc;
+  };
+  kasliVariants = map ({ variant, ... }: variant) (
+    builtins.filter ({ target, ... }: target == "kasli") (
+      builtins.attrValues targets
+    )
+  );
+  standaloneVariants = map ({ variant, ... }: variant) (
+    builtins.filter ({ target, standalone ? false, ... }: target == "kasli" && standalone) (
+      builtins.attrValues targets
+    )
+  );
+  serializedTargets = pkgs.lib.generators.toPretty {} (
+    map (conf:
+      if conf ? buildCommand
+      then conf // {
+        buildCommand = builtins.replaceStrings ["$"] ["\\\\\\$"]  conf.buildCommand;
+      }
+      else conf
+    ) (builtins.attrValues targets)
+  );
+
+  generatedNix = pkgs.runCommand "generated-nix" { buildInputs = [ pkgs.nix pkgs.git ]; }
+    ''
+    mkdir $out
+
+    ${if beta
+      then ''
+        cp -a ${<artiq-board-generated>} $out/board-generated
+        ln -s board-generated/fast $out/fast
+      ''
+      else "cp -a ${<artiq-fast>} $out/fast"}
+    cp ${./artiq-full}/artiq-board-vivado.nix $out
+    cp ${./artiq-full}/generate-identifier.py $out
+    cp ${./artiq-full}/conda-artiq-board.nix $out
+    cp ${./artiq-full}/extras.nix $out
+    cp ${./artiq-full}/*.patch $out
+
+    ${if beta
+      then ''
+        REV=${sinaraSystemsRev}
+        HASH=${sinaraSystemsHash}
+      ''
+      else ''
+        REV=`git --git-dir ${sinaraSystemsSrc}/.git rev-parse HEAD`
+        SINARA_SRC_CLEAN=`mktemp -d`
+        cp -a ${sinaraSystemsSrc}/. $SINARA_SRC_CLEAN
+        chmod -R 755 $SINARA_SRC_CLEAN/.git
+        chmod 755 $SINARA_SRC_CLEAN
+        rm -rf $SINARA_SRC_CLEAN/.git
+        HASH=`nix-hash --type sha256 --base32 $SINARA_SRC_CLEAN`
+      ''}
+    cat > $out/default.nix << EOF
+    { pkgs ? import <nixpkgs> {}}:
+
+    let
+      artiq-fast = import ${if beta then "./board-generated" else "."}/fast { inherit pkgs; };
+      ddbDeps = [
+        artiq-fast.artiq
+        (pkgs.python3.withPackages (ps: [ ps.jsonschema ]))
+      ];
+
+      kasliVariants = [${builtins.concatStringsSep " " (
+        builtins.map (variant: "\"${variant}\"") kasliVariants
+      )}];
+      standaloneVariants = [${builtins.concatStringsSep " " (
+        builtins.map (variant: "\"${variant}\"") standaloneVariants
+      )}];
+
+      vivado = import ${if beta then "./board-generated" else "."}/fast/vivado.nix {
+        inherit pkgs;
+      };
+      artiq-board =
+        ${if beta
+        then ''
+          import ./artiq-board-vivado.nix {
+            inherit pkgs vivado;
+            version = artiq-fast.artiq.version;
+            board-generated = import ./board-generated {
+              inherit pkgs;
+            };
+          }
+        ''
+        else ''
+          import ./fast/artiq-board.nix {
+            inherit pkgs vivado;
+          }
+        ''};
+      conda-artiq-board = import ./conda-artiq-board.nix { inherit pkgs; };
+      src = pkgs.fetchgit {
+        url = "https://git.m-labs.hk/M-Labs/sinara-systems.git";
+        rev = "$REV";
+        sha256 = "$HASH";
+      };
+      artiq-targets = pkgs.lib.lists.foldr (conf: start:
+        let
+          inherit (conf) target variant;
+          json = src + "/\''${variant}.json";
+          boardBinaries = artiq-board (conf // {
+            src = json;
+          });
+        in
+          start // {
+            "artiq-board-\''${target}-\''${variant}" = boardBinaries;
+            "conda-artiq-board-\''${target}-\''${variant}" = conda-artiq-board {
+              boardBinaries = boardBinaries;
+              inherit target variant;
+            };
+          } // (pkgs.lib.optionalAttrs (
+            target == "kasli" &&
+             builtins.elem variant standaloneVariants
+          ) {
+            "device-db-\''${target}-\''${variant}" = pkgs.stdenv.mkDerivation {
+              name = "device-db-\''${target}-\''${variant}";
+              buildInputs = ddbDeps;
+              phases = [ "buildPhase" ];
+              buildPhase = "
+                mkdir \$out
+                artiq_ddb_template \''${json} -o \$out/device_db.py
+                mkdir \$out/nix-support
+                echo file device_db_template \$out/device_db.py >> \$out/nix-support/hydra-build-products
+                ";
+            };
+          })
+      ) {} ${serializedTargets};
+      drtio-systems = {
+        ${pkgs.lib.optionalString beta ''
+          berkeley3 = {
+            master = "berkeley3master";
+            satellites = {
+              "1" = "berkeley3satellite";
+            };
+          };
+          bonn1 = {
+            master = "bonn1master";
+            satellites = {
+              "1" = "bonn1satellite";
+            };
+          };
+          hw2 = {
+            master = "hw2master";
+            satellites = {
+              "1" = "hw2satellite";
+            };
+          };
+          ptb3 = {
+            master = "ptb3master";
+            satellites = {
+              "1" = "ptb3satellite";
+            };
+          };
+          purdue = {
+            master = "purduemaster";
+            satellites = {
+              "1" = "purduesatellite";
+            };
+          };
+          stfc = {
+            master = "stfcmaster";
+            satellites = {
+              "1" = "stfcsatellite";
+            };
+          };
+          wipm7 = {
+            master = "wipm7master";
+            satellites = {
+              "1" = "wipm7satellite";
+            };
+          };
+        ''}
+      };
+      drtio-ddbs = pkgs.lib.attrsets.mapAttrs'
+        (system: crates: pkgs.lib.attrsets.nameValuePair ("device-db-" + system)
+        (pkgs.stdenv.mkDerivation {
+          name = "device-db-\''${system}";
+          buildInputs = ddbDeps;
+          phases = [ "buildPhase" ];
+          buildPhase = "
+            mkdir \$out
+            artiq_ddb_template \
+              \''${pkgs.lib.strings.concatStringsSep " " (pkgs.lib.attrsets.mapAttrsToList (dest: desc: "-s " + dest + " " + (src + "/\''${desc}.json")) crates.satellites) } \
+              \''${src}/\''${crates.master}.json -o \$out/device_db.py
+            mkdir \$out/nix-support
+            echo file device_db_template \$out/device_db.py >> \$out/nix-support/hydra-build-products
+            ";
+        })) drtio-systems;
+      extras = import ./extras.nix { inherit pkgs; inherit (artiq-fast) sipyco asyncserial artiq; };
+    in
+      artiq-fast // artiq-targets // drtio-ddbs // extras // rec {
+        conda-artiq-board-kasli-tester = conda-artiq-board {
+          target = "kasli";
+          variant = "tester";
+          boardBinaries = artiq-fast.artiq-board-kasli-tester;
+        };
+        conda-artiq-board-kc705-nist_clock = conda-artiq-board {
+          target = "kc705";
+          variant = "nist_clock";
+          boardBinaries = artiq-fast.artiq-board-kc705-nist_clock;
+        };
+      }
+    EOF
+    '';
+  pythonDeps = import ./artiq-full/python-deps.nix { inherit pkgs; };
+  sipycoManualPackages = import ./artiq-full/sipyco-manual.nix {
+    inherit (pkgs) stdenv lib python3Packages texlive texinfo;
+    inherit (import artiq-fast { inherit pkgs; }) sipyco;
+  };
+  artiqManualPackages = import ./artiq-full/artiq-manual.nix {
+    inherit (pkgs) stdenv lib fetchgit git python3Packages texlive texinfo;
+    inherit (pythonDeps) sphinxcontrib-wavedrom;
+    inherit artiq-fast;
+  };
+  artiq-full = import generatedNix { inherit pkgs; };
+  exampleUserEnv = import ./artiq-full/example-user-env.nix { inherit pkgs artiq-full; };
+  jobs = artiq-full // sipycoManualPackages // artiqManualPackages // exampleUserEnv;
+in
+  builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) jobs // {
+    artiq-full = pkgs.releaseTools.channel {
+      name = "artiq-full";
+      src = generatedNix;
+      constituents = [];
+    };
+    conda-channel = import ./artiq-full/conda-channel.nix { inherit pkgs; } { inherit jobs; };
+  }

artiq-full/artiq-board-vivado.nix

@@ -0,0 +1,125 @@
+# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
+#  nix.sandboxPaths = ["/opt"];
+
+{ pkgs
+, vivado ? import ./fast/vivado.nix { inherit pkgs; }
+, board-generated
+, version
+}:
+
+let
+  # Funnelling the source code through a Nix string allows dropping
+  # all dependencies via `unsafeDiscardStringContext`.
+  discardContextFromPath = { name, src }:
+    let
+      packed = pkgs.stdenv.mkDerivation {
+          name = "${name}.nar.base64";
+          buildInputs = [ pkgs.nix ];
+          phases = [ "installPhase" ];
+          installPhase = "nix-store --dump ${src} | base64 -w0 > $out";
+        };
+      unpacked = archive:
+        pkgs.stdenvNoCC.mkDerivation {
+          name = builtins.unsafeDiscardStringContext name;
+
+          phases = [ "installPhase" ];
+          buildInputs = [ pkgs.nix ];
+          installPhase = "base64 -d < ${archive} | nix-store --restore $out";
+        };
+    in
+      unpacked (
+        builtins.toFile "${builtins.unsafeDiscardStringContext name}.nar.base64" (
+          builtins.unsafeDiscardStringContext (
+            builtins.readFile packed
+          ))) ;
+in
+{ target
+, variant
+, extraInstallCommands ? ""
+, ... }:
+let
+  name = "artiq-board-${target}-${variant}-${version}";
+  installPath = builtins.unsafeDiscardStringContext "${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}";
+
+  generated = board-generated."artiq-board-${target}-${variant}";
+
+  identifierStr = "${version};${variant}";
+  identifiers = import (
+    pkgs.runCommandLocal "${name}-identifiers.nix" {
+      buildInputs = [ pkgs.python3 ];
+    } ''python ${./generate-identifier.py} "${identifierStr}" > $out''
+  );
+
+  # Depends on just Vivado and the generated Bitstream source
+  vivadoCheckpoint = pkgs.stdenvNoCC.mkDerivation {
+    name = builtins.unsafeDiscardStringContext "${name}-vivado-checkpoint";
+
+    src = discardContextFromPath {
+      name = "${name}-gateware";
+      src = "${generated}/gateware";
+    };
+    buildInputs = [ vivado pkgs.nix ];
+    buildPhase = ''
+      vivado -mode batch -source top_route.tcl
+    '';
+
+    installPhase = ''
+      mkdir -p $out
+
+      chmod a+r top_route.dcp
+      cp top_route.dcp $out
+      cp top_bitstream.tcl $out
+    '';
+  };
+
+  vivadoOutput = pkgs.stdenvNoCC.mkDerivation {
+    name = builtins.unsafeDiscardStringContext "${name}-vivado-output";
+    src = vivadoCheckpoint;
+    buildInputs = [ vivado ];
+    buildPhase =
+      ''
+      cat >top.tcl <<EOF
+      open_checkpoint top_route.dcp
+      '' +
+      (pkgs.lib.concatMapStrings ({ cell, init }:
+        ''
+        set_property INIT ${init} [get_cell ${cell}]
+        ''
+      ) identifiers) +
+      ''
+      source "top_bitstream.tcl"
+      EOF
+      vivado -mode batch -source top.tcl
+      '';
+    installPhase = ''
+      TARGET_DIR=$out/${installPath}
+      mkdir -p $TARGET_DIR
+      chmod a+r top.bit
+      cp top.bit $TARGET_DIR/
+    '';
+
+    # temporarily disabled because there is currently always at least one Kasli bitstream
+    # that fails timing and blocks the conda channel.
+    doCheck = false;
+    checkPhase = ''
+      # Search for PCREs in the Vivado output to check for errors
+      check_log() {
+        set +e
+        grep -Pe "$1" vivado.log
+        FOUND=$?
+        set -e
+        if [ $FOUND != 1 ]; then
+          exit 1
+        fi
+      }
+      check_log "\d+ constraint not met\."
+      check_log "Timing constraints are not met\."
+    '';
+  };
+in
+pkgs.python3Packages.toPythonModule (
+  pkgs.buildEnv rec {
+    inherit name;
+    paths = [ generated vivadoOutput ];
+    pathsToLink = [ "/${installPath}" ];
+  })

artiq-full/artiq-manual.nix

@@ -0,0 +1,57 @@
+{ stdenv, lib, fetchgit, git, python3Packages, texlive, texinfo, sphinxcontrib-wavedrom, artiq-fast }:
+
+let
+  artiqVersion = import (artiq-fast + "/pkgs/artiq-version.nix") { inherit stdenv fetchgit git; };
+
+  isLatexPdfTarget = target: builtins.match "latexpdf.*" target != null;
+
+  latex = texlive.combine {
+    inherit (texlive)
+      scheme-basic latexmk cmap collection-fontsrecommended fncychap
+      titlesec tabulary varwidth framed fancyvrb float wrapfig parskip
+      upquote capt-of needspace etoolbox;
+  };
+
+  artiq-manual = target: stdenv.mkDerivation rec {
+    name = "artiq-manual-${target}-${version}";
+    version = artiqVersion;
+
+    src = import (artiq-fast + "/pkgs/artiq-src.nix") { inherit fetchgit; };
+    buildInputs = [
+      python3Packages.sphinx python3Packages.sphinx_rtd_theme
+      python3Packages.sphinx-argparse sphinxcontrib-wavedrom
+    ] ++
+      lib.optional (isLatexPdfTarget target) latex ++
+      lib.optional (target == "texinfo") texinfo;
+
+    preBuild = ''
+        export VERSIONEER_OVERRIDE=${artiqVersion}
+        export SOURCE_DATE_EPOCH=${import (artiq-fast + "/pkgs/artiq-timestamp.nix") { inherit stdenv fetchgit git; }}
+        cd doc/manual
+      '';
+    makeFlags = [ target ];
+
+    installPhase =
+      let
+        dest = "$out/share/doc/artiq-manual";
+      in
+        if isLatexPdfTarget target
+        then ''
+            mkdir -p ${dest}
+            cp _build/latex/ARTIQ.pdf ${dest}/
+
+            mkdir -p $out/nix-support/
+            echo doc-pdf manual ${dest} ARTIQ.pdf >> $out/nix-support/hydra-build-products
+          ''
+        else ''
+            mkdir -p ${dest}
+            cp -r _build/${target} ${dest}/
+
+            mkdir -p $out/nix-support/
+            echo doc manual ${dest}/${target} index.html >> $out/nix-support/hydra-build-products
+          '';
+  };
+
+  targets = [ "html" "latexpdf" ];
+in
+  builtins.listToAttrs (map (target: { name = "artiq-manual-${target}"; value = artiq-manual target; }) targets)

artiq-full/artiq-targets.nix

@@ -0,0 +1,65 @@
+{ pkgs
+, artiqVersion
+, sinaraSystemsSrc
+}:
+
+let
+  jsons =
+    map (jsonFile: builtins.fromJSON (
+      builtins.readFile (sinaraSystemsSrc + "/${jsonFile}")
+    )) (
+      builtins.attrNames (
+        pkgs.lib.filterAttrs (name: type:
+          type != "directory" &&
+          builtins.match ".+\\.json" name != null
+        ) (builtins.readDir sinaraSystemsSrc)
+      )
+    );
+  kasli = builtins.listToAttrs (
+    builtins.map ({ variant, base, ... }: {
+      name = "artiq-board-kasli-${variant}";
+      value = {
+        target = "kasli";
+        inherit variant;
+        src = sinaraSystemsSrc + "/${variant}.json";
+        buildCommand = "python -m artiq.gateware.targets.kasli_generic $src";
+        standalone = base == "standalone";
+      };
+    }) (
+      builtins.filter (json:
+        pkgs.lib.strings.versionAtLeast artiqVersion (
+          if json ? min_artiq_version
+          then json.min_artiq_version
+          else "0"
+        )
+      ) jsons
+    )
+  );
+in
+kasli // {
+  artiq-board-sayma-rtm = {
+    target = "sayma";
+    variant = "rtm";
+    buildCommand = "python -m artiq.gateware.targets.sayma_rtm";
+  };
+  artiq-board-sayma-satellite = {
+    target = "sayma";
+    variant = "satellite";
+    buildCommand = "python -m artiq.gateware.targets.sayma_amc";
+  };
+  artiq-board-metlino-master = {
+    target = "metlino";
+    variant = "master";
+    buildCommand = "python -m artiq.gateware.targets.metlino";
+  };
+  artiq-board-kc705-nist_qc2 = {
+    target = "kc705";
+    variant = "nist_qc2";
+  };
+} // (pkgs.lib.optionalAttrs (pkgs.lib.strings.versionAtLeast artiqVersion "6.0") {
+  artiq-board-sayma-satellite-st = {
+    target = "sayma";
+    variant = "satellite";
+    buildCommand = "python -m artiq.gateware.targets.sayma_amc --jdcg-type syncdds";
+  };
+})

artiq-full/conda-artiq-board.nix

@@ -0,0 +1,48 @@
+{ pkgs }:
+{ target, variant, boardBinaries }:
+
+with pkgs;
+
+let
+  version = import ./fast/pkgs/artiq-version.nix (with pkgs; { inherit stdenv fetchgit git; });
+  fakeCondaSource = runCommand "fake-condasrc-artiq-board-${target}-${variant}" { }
+    ''
+    mkdir -p $out/fake-conda;
+
+    cat << EOF > $out/fake-conda/meta.yaml
+    package:
+      name: artiq-board-${target}-${variant}
+      version: ${version}
+
+    build:
+      noarch: python
+      ignore_prefix_files: True
+
+    outputs:
+      - name: artiq-board-${target}-${variant}
+        noarch: python
+        files:
+          - site-packages
+        ignore_prefix_files: True
+
+    about:
+      home: https://m-labs.hk/artiq
+      license: LGPL
+      summary: 'Bitstream, bootloader and firmware for the ${target}-${variant} board variant'
+    EOF
+
+    cat << EOF > $out/fake-conda/build.sh
+    #!/bin/bash
+    set -e
+    SOC_PREFIX=\$PREFIX/site-packages/artiq/board-support/${target}-${variant}
+    mkdir -p \$SOC_PREFIX
+    cp ${boardBinaries}/${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}/* \$SOC_PREFIX
+    EOF
+    chmod 755 $out/fake-conda/build.sh
+    '';
+  conda-artiq-board = import ./fast/conda/build.nix { inherit pkgs; } {
+    name = "conda-artiq-board-${target}-${variant}";
+    src = fakeCondaSource;
+  };
+in
+  conda-artiq-board

artiq-full/conda-channel.nix

@@ -0,0 +1,25 @@
+{ pkgs }:
+{ jobs }:
+
+let 
+  condaBuilderEnv = import <artiq-fast/conda/builder-env.nix> { inherit pkgs; };
+in
+  pkgs.runCommand "conda-channel" { }
+    ''
+    mkdir -p $out/noarch $out/linux-64 $out/win-64
+    for storepath in ${pkgs.lib.concatMapStringsSep " " builtins.toString (builtins.attrValues jobs)}; do
+      hydra_build_products=$storepath/nix-support/hydra-build-products
+      if [ -f $hydra_build_products ]; then
+        while IFS= read -r line; do
+          type=`echo $line | cut -f2 -d " "`
+          if [ $type == "conda" ]; then
+            path=`echo $line | cut -f3 -d " "`
+            arch=`echo $path | cut -f5 -d "/"`
+            ln -s $path $out/$arch
+          fi
+        done < $hydra_build_products
+      fi
+    done
+    cd $out
+    ${condaBuilderEnv}/bin/conda-builder-env -c "conda index"
+    ''

artiq-full/example-user-env.nix

@@ -0,0 +1,37 @@
+{ pkgs, artiq-full }:
+let
+  matplotlib-qt = (pkgs.python3Packages.matplotlib.override { enableQt = true; });
+in
+{
+  artiq-example-user-env = pkgs.runCommand "artiq-example-user-env" {
+    buildInputs = [
+      (pkgs.python3.withPackages(ps: [
+        artiq-full.artiq
+        artiq-full.artiq-comtools
+        artiq-full.wand
+        artiq-full.flake8-artiq
+        artiq-full.lda
+        artiq-full.korad_ka3005p
+        artiq-full.novatech409b
+        artiq-full.thorlabs_tcube
+        artiq-full.artiq-board-kc705-nist_clock
+        artiq-full.artiq-board-kasli-oregon
+        ps.paramiko
+        ps.pandas
+        ps.numpy
+        ps.scipy
+        ps.numba
+        ps.bokeh
+        matplotlib-qt
+        (ps.cirq.override { matplotlib = matplotlib-qt; })
+        # qiskit does not work with matplotlib-qt
+        #ps.qiskit
+      ]))
+
+      artiq-full.openocd
+      pkgs.gtkwave
+      #pkgs.spyder  # broken on 20.03
+      pkgs.R
+    ];
+  } "touch $out";
+}

artiq-full/extras.nix

@@ -0,0 +1,248 @@
+{ pkgs, sipyco, asyncserial, artiq }:
+let
+  condaBuild = import ./fast/conda/build.nix { inherit pkgs; };
+  condaFakeSource = import ./fast/conda/fake-source.nix { inherit pkgs; };
+  dualPackage = (
+    { name, version, src, pythonOptions ? {}, condaOptions ? {}, withManual ? true}:
+      {
+        "${name}" = pkgs.python3Packages.buildPythonPackage ({
+          inherit version;
+          name = "${name}-${version}";
+          inherit src;
+        } // pythonOptions);
+        "conda-${name}" = condaBuild {
+          name = "conda-${name}";
+          src = condaFakeSource ({
+            inherit name version src;
+          } // condaOptions);
+        };
+      } // (pkgs.lib.optionalAttrs withManual {
+        "${name}-manual-html" = pkgs.stdenv.mkDerivation {
+          name = "${name}-manual-html-${version}";
+          inherit version src;
+          buildInputs = (with pkgs.python3Packages; [ sphinx sphinx_rtd_theme sphinx-argparse ]) ++ [ artiq ];
+          preBuild = ''
+            export SOURCE_DATE_EPOCH=${import ./fast/pkgs/artiq-timestamp.nix { inherit (pkgs) stdenv fetchgit git; }}
+            cd doc
+          '';
+          makeFlags = [ "html" ];
+          installPhase =
+            let
+              dest = "$out/share/doc/${name}-manual";
+            in
+              ''
+              mkdir -p ${dest}
+              cp -r _build/html ${dest}/
+
+              mkdir -p $out/nix-support/
+              echo doc manual ${dest}/html index.html >> $out/nix-support/hydra-build-products
+              '';
+        };
+      })
+    );
+  # https://github.com/m-labs/artiq/issues/23
+  hidapi = pkgs.hidapi.overrideAttrs (oa: {
+      src = pkgs.fetchFromGitHub {
+        owner = "signal11";
+        repo = "hidapi";
+        rev = "a6a622ffb680c55da0de787ff93b80280498330f";
+        sha256 = "17n7c4v3jjrnzqwxpflggxjn6vkzscb32k4kmxqjbfvjqnx7qp7j";
+      };
+    });
+in
+  (dualPackage {
+    name = "korad_ka3005p";
+    version = "1.1";
+    src = pkgs.fetchFromGitHub {
+      owner = "m-labs";
+      repo = "korad_ka3005p";
+      rev = "a1898409cb188b388ed1cf84e76ca69e9c8a74eb";
+      sha256 = "0h20qss70nssqiagc2fx75mravq1pji7rizhag3nq8xrcz2w20nc";
+    };
+    pythonOptions = { propagatedBuildInputs = [ sipyco asyncserial ]; };
+    condaOptions = { dependencies = [ "sipyco" "asyncserial" ]; };
+  }) // (dualPackage {
+    name = "novatech409b";
+    version = "1.1";
+    src = pkgs.fetchFromGitHub {
+      owner = "m-labs";
+      repo = "novatech409b";
+      rev = "3bd559753972f07d881df66b7c6819afc5436053";
+      sha256 = "1g9qv6fn5h7d393mb1v7w8sg6fimqg34blqdj22qnayb4agw1wyg";
+    };
+    pythonOptions = { propagatedBuildInputs = [ sipyco asyncserial ]; };
+    condaOptions = { dependencies = [ "sipyco" "asyncserial" ]; };
+  }) // (dualPackage {
+    name = "lda";
+    version = "1.1";
+    src = pkgs.fetchFromGitHub {
+      owner = "m-labs";
+      repo = "lda";
+      rev = "e6bf828b6dfd7fbf59b61b691712736c98c95970";
+      sha256 = "1w4ykzsl3386bz4ggpd6i60b6a3k7rnc6qjw59xm3hk0vs3w2vyn";
+    };
+    pythonOptions = {
+      propagatedBuildInputs = [ sipyco ];
+      postPatch = ''
+        substituteInPlace lda/hidapi.py \
+        --replace "hidapi_lib_path = None"\
+                  "hidapi_lib_path = '${hidapi}/lib/libhidapi-libusb.so.0'"
+      '';
+    };
+    condaOptions = { dependencies = [ "sipyco" ]; };
+  }) // (dualPackage {
+    name = "thorlabs_tcube";
+    version = "1.1";
+    src = pkgs.fetchFromGitHub {
+      owner = "m-labs";
+      repo = "thorlabs_tcube";
+      rev = "0cb0c15fc7e660a150e193245f5338d48f8b97db";
+      sha256 = "1n4zmjcj2kpd97217y602pq6x8s80w39fgyi6qjmal92aicqdg07";
+    };
+    pythonOptions = { propagatedBuildInputs = [ sipyco asyncserial ]; };
+    condaOptions = { dependencies = [ "sipyco" "asyncserial" ]; };
+  }) // (dualPackage {
+    name = "newfocus8742";
+    version = "0.2";
+    src = pkgs.fetchFromGitHub {
+      owner = "quartiq";
+      repo = "newfocus8742";
+      rev = "9f6092b724b33b934aa4d3a1d6a20c295cd1d02d";
+      sha256 = "0qf05ghylnqf3l5vjx5dc748wi84xn6p6lb6f9r8p6f1z7z67fb8";
+    };
+    pythonOptions = {
+      propagatedBuildInputs = [ sipyco pkgs.python3Packages.pyusb ];
+      # no unit tests so do a simple smoke test
+      checkPhase = "python -m newfocus8742.aqctl_newfocus8742 -h";
+    };
+    condaOptions = { dependencies = [ "sipyco" ]; };
+  }) // (dualPackage {
+    name = "hut2";
+    version = "0.2";
+    src = pkgs.fetchFromGitHub {
+      owner = "quartiq";
+      repo = "hut2";
+      rev = "68369d5d63d233827840a9a752d90454a4e03baa";
+      sha256 = "0r832c0icz8v3w27ci13024bqfslj1gx6dwhjv11ksw229xdcghd";
+    };
+    pythonOptions = {
+      propagatedBuildInputs = [ sipyco ];
+      # no unit tests without hardware so do a simple smoke test
+      checkPhase = "python -m hut2.aqctl_hut2 -h";
+    };
+    condaOptions = { dependencies = [ "sipyco" ]; };
+  }) // rec {
+    toptica-lasersdk = pkgs.python3Packages.buildPythonPackage rec {
+      version = "2.0.0";
+      name = "toptica-lasersdk-${version}";
+      format = "wheel";
+      src = pkgs.fetchurl {
+        url = "https://files.pythonhosted.org/packages/6b/e2/5c98407215884c2570453a78bc0d6f0bbe619f06593847ccd6a2f1d3fe59/toptica_lasersdk-2.0.0-py3-none-any.whl";
+        sha256 = "1k5d9ah8qzp75hh63nh9l5dk808v9ybpmzlhrdc3sxmas3ajv8s7";
+      };
+      propagatedBuildInputs = [ pkgs.python3Packages.pyserial ];
+    };
+    toptica-lasersdk-artiq = pkgs.python3Packages.buildPythonPackage rec {
+      version = "0.2";
+      name = "toptica-lasersdk-artiq-${version}";
+      src = pkgs.fetchFromGitHub {
+        owner = "quartiq";
+        repo = "lasersdk-artiq";
+        rev = "901dec13a1bf9429ce7ab49be34b03d1c49b8a9f";
+        sha256 = "0lqxvgvpgrpw1kzhg5axnfb40ils2vdk75r43hqmk2lfz4sydwb2";
+      };
+      postPatch = ''
+        substituteInPlace lasersdk_artiq/aqctl_laser.py \
+          --replace "toptica.lasersdk.async.client" \
+                    "toptica.lasersdk.asyncio.client"
+        substituteInPlace lasersdk_artiq/test.py \
+          --replace "toptica.lasersdk.async.client" \
+                    "toptica.lasersdk.asyncio.client"
+      '';
+      propagatedBuildInputs = [ sipyco toptica-lasersdk ];
+    };
+    conda-toptica-lasersdk-artiq = condaBuild {
+      name = "conda-toptica-lasersdk-artiq";
+      src = condaFakeSource {
+        name = "toptica-lasersdk-artiq";
+        inherit (toptica-lasersdk-artiq) version src;
+        dependencies = [ "sipyco" "lasersdk =1.3.1" ];
+      };
+    };
+  } // (dualPackage {
+    name = "highfinesse-net";
+    version = "0.2";
+    src = pkgs.fetchFromGitHub {
+      owner = "quartiq";
+      repo = "highfinesse-net";
+      rev = "a9cc049c9846845d2b2d8662266ec11fe770abee";
+      sha256 = "01mk4gf6rk3jqpz4y7m35vawjybvyp26bizz5a4ygkb8dq5l51g4";
+    };
+    pythonOptions = {
+      propagatedBuildInputs = [ sipyco ];
+      # no unit tests without hardware so do a simple smoke test
+      checkPhase = "python -m highfinesse_net.aqctl_highfinesse_net -h";
+    };
+    condaOptions = { dependencies = [ "sipyco" ]; };
+  }) // rec {
+    artiq-comtools = pkgs.python3Packages.buildPythonPackage rec {
+      name = "artiq-comtools-${version}";
+      version = "1.1";
+      src = pkgs.fetchFromGitHub {
+        owner = "m-labs";
+        repo = "artiq-comtools";
+        rev = "v${version}";
+        sha256 = "165j12k9nnrkf2pv0idcv6xhnp1hnsllna4rps2dssnqgjfaw1ss";
+      };
+      propagatedBuildInputs = [ sipyco pkgs.python3Packages.numpy pkgs.python3Packages.aiohttp ];
+      # Modifies PATH to pass the wrapped python environment (i.e. python3.withPackages(...) to subprocesses.
+      # Allows subprocesses using python to find all packages you have installed
+      makeWrapperArgs = [ ''--run 'if [ ! -z "$NIX_PYTHONPREFIX" ]; then export PATH=$NIX_PYTHONPREFIX/bin:$PATH;fi' '' ];
+    };
+    conda-artiq-comtools = condaBuild {
+      name = "conda-artiq-comtools";
+      src = condaFakeSource {
+        name = "artiq-comtools";
+        inherit (artiq-comtools) version src;
+        dependencies = [ "sipyco" "numpy" "aiohttp >=3" ];
+      };
+    };
+  } // {
+    wand = pkgs.python3Packages.buildPythonApplication rec {
+      name = "wand";
+      version = "0.4.dev";
+      src = pkgs.fetchFromGitHub {
+        owner = "OxfordIonTrapGroup";
+        repo = "wand";
+        rev = "0bf1cfef4aa37e5761c20ac8702abec125b45e23";
+        sha256 = "0jfw6w6id7qkx2f6rklrmp13b2hsnvii1qbls60ampx399lcb43g";
+      };
+      patches = [ ./wand-fix-config-dir.patch ];
+      nativeBuildInputs = [ pkgs.qt5.wrapQtAppsHook ];
+      dontWrapQtApps = true;
+      postFixup = ''
+        wrapQtApp "$out/bin/wand_gui"
+      '';
+      propagatedBuildInputs = with pkgs.python3Packages; [ artiq quamash numpy scipy influxdb setuptools ];
+    };
+  } // (dualPackage {
+    name = "flake8-artiq";
+    version = "0.1";
+    withManual = false;
+    src = pkgs.fetchgit {
+      url = "https://gitlab.com/duke-artiq/flake8-artiq.git";
+      rev = "ed5c4f56c391fe11c6c81020f06a1dc80c2cae9e";
+      sha256 = "112qlx3rx4w7l23f0n16xldc49x4wvf65fx4wdyzq85rxlvl72kh";
+    };
+    pythonOptions = {
+      propagatedBuildInputs = [ pkgs.python3Packages.flake8 ];
+      checkInputs = [ pkgs.python3Packages.pytest pkgs.python3Packages.mypy pkgs.python3Packages.flake8 ];
+      checkPhase =
+        ''
+        pytest
+        mypy
+        flake8
+        '';
+    };
+    condaOptions = { dependencies = [ "flake8" ]; };
+  })

artiq-full/generate-identifier.py

@@ -0,0 +1,24 @@
+#!/usr/bin/env python
+#
+# Encodes data like ARTIQ build_soc.py ReprogrammableIdentifier
+
+import sys
+
+if len(sys.argv) != 2:
+    raise ValueError('argument missing')
+
+identifier_str = sys.argv[1]
+contents = list(identifier_str.encode())
+l = len(contents)
+if l > 255:
+    raise ValueError("Identifier string must be 255 characters or less")
+contents.insert(0, l)
+
+f = sys.stdout
+f.write("[\n");
+for i in range(7):
+    init = sum(1 << j if c & (1 << i) else 0 for j, c in enumerate(contents))
+    f.write(
+        '  {{ cell = "identifier_str{}"; init = "256\'h{:X}"; }}\n'.format(i, init)
+    )
+f.write("]\n");

artiq-full/python-deps.nix

@@ -0,0 +1,43 @@
+{ pkgs }:
+
+rec {
+  wavedrom = pkgs.python3Packages.buildPythonPackage rec {
+    pname = "wavedrom";
+    version = "2.0.3.post2";
+
+    src = pkgs.python3Packages.fetchPypi {
+      inherit pname version;
+      sha256 = "13a4086417nv836s2wbj3f4r31gwapbyw5smgl00jsqizwsk96r3";
+    };
+
+    buildInputs = [ pkgs.python3Packages.setuptools_scm ];
+    propagatedBuildInputs = with pkgs.python3Packages; [ svgwrite attrdict ];
+    doCheck = false;
+
+    meta = with pkgs.stdenv.lib; {
+      description = "WaveDrom compatible Python module and command line";
+      homepage    = "https://pypi.org/project/wavedrom/";
+      license     = licenses.mit;
+    };
+  };
+
+  sphinxcontrib-wavedrom = pkgs.python3Packages.buildPythonPackage rec {
+    pname = "sphinxcontrib-wavedrom";
+    version = "2.1.1";
+
+    src = pkgs.python3Packages.fetchPypi {
+      inherit pname version;
+      sha256 = "09xq4csdcil2x8mm38yd5k6lfbkazicvm278xnzwbfc9vghkqqs2";
+    };
+
+    buildInputs = [ pkgs.python3Packages.setuptools_scm ];
+    propagatedBuildInputs = [ wavedrom ] ++ (with pkgs.python3Packages; [ sphinx xcffib cairosvg ]);
+    doCheck = false;
+
+    meta = with pkgs.stdenv.lib; {
+      description = "A Sphinx extension that allows including WaveDrom diagrams";
+      homepage    = "https://pypi.org/project/sphinxcontrib-wavedrom/";
+      license     = licenses.mit;
+    };
+  };
+}

artiq-full/sipyco-manual.nix

@@ -0,0 +1,56 @@
+{ stdenv, lib, python3Packages, texlive, texinfo, sipyco }:
+
+let
+  version = sipyco.version;
+
+  isLatexPdfTarget = target: builtins.match "latexpdf.*" target != null;
+
+  latex = texlive.combine {
+    inherit (texlive)
+      scheme-basic latexmk cmap collection-fontsrecommended fncychap
+      titlesec tabulary varwidth framed fancyvrb float wrapfig parskip
+      upquote capt-of needspace etoolbox;
+  };
+
+  sipyco-manual = target: stdenv.mkDerivation rec {
+    name = "sipyco-manual-${target}-${version}";
+    inherit version;
+
+    src = sipyco.src;
+    buildInputs = [
+      python3Packages.sphinx python3Packages.sphinx_rtd_theme
+      python3Packages.sphinx-argparse sipyco
+    ] ++
+      lib.optional (isLatexPdfTarget target) latex ++
+      lib.optional (target == "texinfo") texinfo;
+
+    preBuild = ''
+        export SOURCE_DATE_EPOCH=`cat TIMESTAMP`
+        cd doc
+      '';
+    makeFlags = [ target ];
+
+    installPhase =
+      let
+        dest = "$out/share/doc/sipyco-manual";
+      in
+        if isLatexPdfTarget target
+        then ''
+            mkdir -p ${dest}
+            cp _build/latex/SiPyCo.pdf ${dest}/
+
+            mkdir -p $out/nix-support/
+            echo doc-pdf manual ${dest} SiPyCo.pdf >> $out/nix-support/hydra-build-products
+          ''
+        else ''
+            mkdir -p ${dest}
+            cp -r _build/${target} ${dest}/
+
+            mkdir -p $out/nix-support/
+            echo doc manual ${dest}/${target} index.html >> $out/nix-support/hydra-build-products
+          '';
+  };
+
+  targets = [ "html" "latexpdf" ];
+in
+  builtins.listToAttrs (map (target: { name = "sipyco-manual-${target}"; value = sipyco-manual target; }) targets)

artiq-full/wand-fix-config-dir.patch

@@ -0,0 +1,30 @@
+diff --git a/wand/tools.py b/wand/tools.py
+index a51dabd..4d5a9d1 100644
+--- a/wand/tools.py
++++ b/wand/tools.py
+@@ -6,6 +6,7 @@ import shutil
+ import logging
+ 
+ from sipyco import pyon
++from artiq.appdirs import user_config_dir
+ import wand
+ 
+ logger = logging.getLogger(__name__)
+@@ -26,10 +27,15 @@ class LockException(Exception):
+     pass
+ 
+ 
++def get_user_config_dir():
++    dir = user_config_dir("wand", "oitg", "1")
++    os.makedirs(dir, exist_ok=True)
++    return dir
++
++
+ def get_config_path(args, name_suffix=""):
+     config_file = "{}{}_config.pyon".format(args.name, name_suffix)
+-    wand_dir = os.path.dirname(wand.__file__)
+-    config_path = os.path.join(wand_dir, config_file)
++    config_path = os.path.join(get_user_config_dir(), config_file)
+ 
+     if args.backup_dir == "":
+         backup_path = ""

gluelogic/default.nix

@@ -1,12 +1,12 @@
 { pkgs ? import <nixpkgs> {} }:
 let
+  artiqpkgs = import ../artiq-fast/pkgs/python-deps.nix { inherit (pkgs) stdenv fetchgit fetchFromGitHub python3Packages; misoc-new = true; };
   ise = import ./ise.nix { inherit pkgs; };
-  vivado = import ./vivado.nix { inherit pkgs; };
+  vivado = import ../artiq-fast/vivado.nix { inherit pkgs; };
-  fpgatools = import ./fpgatools.nix { inherit pkgs; };
   buildUrukulCpld = {version, src}: pkgs.stdenv.mkDerivation {
     pname = "urukul-cpld";
     inherit src version;
-    buildInputs = [(pkgs.python3.withPackages(ps: [fpgatools.migen]))] ++ (builtins.attrValues fpgatools.ise);
+    buildInputs = [(pkgs.python3.withPackages(ps: [artiqpkgs.migen]))] ++ (builtins.attrValues ise);
     phases = ["buildPhase" "installPhase"];
     buildPhase = "python $src/urukul_impl.py";
     installPhase =
@@ -16,11 +16,11 @@ let
       echo file binary-dist $out/urukul.jed >> $out/nix-support/hydra-build-products
       '';
   };
-  buildMirnyCpld = {version, patchPhase ? "", src}: pkgs.stdenv.mkDerivation {
+  buildMirnyCpld = {version, src}: pkgs.stdenv.mkDerivation {
     pname = "mirny-cpld";
-    inherit src version patchPhase;
+    inherit src version;
-    buildInputs = [(pkgs.python3.withPackages(ps: [fpgatools.migen]))] ++ (builtins.attrValues fpgatools.ise);
+    buildInputs = [(pkgs.python3.withPackages(ps: [artiqpkgs.migen]))] ++ (builtins.attrValues ise);
-    phases = ["unpackPhase" "patchPhase" "buildPhase" "installPhase"];
+    phases = ["buildPhase" "installPhase"];
     buildPhase = "python $src/mirny_impl.py";
     installPhase =
       ''
@@ -58,28 +58,18 @@ in
       src = <mirnySrc>;
     };
     mirny-cpld-release = buildMirnyCpld rec {
-      version = "0.3.1";
-      src = pkgs.fetchFromGitHub {
-        owner = "quartiq";
-        repo = "mirny";
-        rev = "v${version}";
-        sha256 = "sha256-FbPUgXcUByEnczbnDCh8wYPO+rpSZSAabG1rtvA7mIs=";
-      };
-    };
-    mirny-cpld-legacy-almazny = buildMirnyCpld rec {
       version = "0.2.4";
       src = pkgs.fetchFromGitHub {
         owner = "quartiq";
         repo = "mirny";
         rev = "v${version}";
-        sha256 = "sha256-/O1AE0JOXALC8I7NPhOd8h18oX8Qu7lj+6ToAMMD3zs=";
+        sha256 = "0fyz0g1h1s54zdivkfqhgyhpq7gjkl9kxkcfy3104p2f889l1vgw";
       };
-      patchPhase = "patch -p1 < ${./mirny-legacy-almazny.diff}";
     };
     fastino-fpga = pkgs.stdenv.mkDerivation {
       name = "fastino-fpga";
       src = <fastinoSrc>;
-      buildInputs = [(pkgs.python3.withPackages(ps: [fpgatools.migen fpgatools.misoc]))] ++ [pkgs.yosys pkgs.nextpnr pkgs.icestorm];
+      buildInputs = [(pkgs.python3.withPackages(ps: [artiqpkgs.migen artiqpkgs.misoc]))] ++ [pkgs.yosys pkgs.nextpnr pkgs.icestorm];
       phases = ["buildPhase" "installPhase"];
       buildPhase = "python $src/fastino_phy.py";
       installPhase =
@@ -98,7 +88,7 @@ in
                     ""
       '';
 
-      buildInputs = [ (pkgs.python3.withPackages(ps: [ fpgatools.migen fpgatools.misoc ])) ] ++ [ fpgatools.vivado ];
+      buildInputs = [ (pkgs.python3.withPackages(ps: [ artiqpkgs.migen artiqpkgs.misoc ])) ] ++ [ vivado ];
       buildPhase = "python phaser.py";
       installPhase =
         ''

gluelogic/fpgatools.nix

@@ -1,94 +0,0 @@
-{ pkgs, isePath ? "/opt/Xilinx/14.7/ISE_DS", vivadoPath ? "/opt/Xilinx/Vivado/2022.2" }:
-rec {
-  ise = let
-    makeXilinxEnv = name: pkgs.buildFHSUserEnv {
-      inherit name;
-      targetPkgs = pkgs: (
-        with pkgs; [
-          ncurses5
-          zlib
-          libuuid
-          xorg.libSM
-          xorg.libICE
-          xorg.libXrender
-          xorg.libX11
-          xorg.libXext
-          xorg.libXtst
-          xorg.libXi
-        ]
-      );
-      profile = 
-        ''
-        source ${isePath}/common/.settings64.sh ${isePath}/common
-        source ${isePath}/ISE/.settings64.sh ${isePath}/ISE
-        '';
-      runScript = name;
-    };
-  in
-    pkgs.lib.attrsets.genAttrs ["xst" "ngdbuild" "cpldfit" "taengine" "hprep6"] makeXilinxEnv;
-  vivado = pkgs.buildFHSUserEnv {
-    name = "vivado";
-    targetPkgs = pkgs: (
-      with pkgs; let
-        # Apply patch from https://github.com/nix-community/nix-environments/pull/54
-        # to fix ncurses libtinfo.so's soname issue
-        ncurses' = ncurses5.overrideAttrs (old: {
-          configureFlags = old.configureFlags ++ [ "--with-termlib" ];
-          postFixup = "";
-        });
-      in [
-        libxcrypt-legacy
-        (ncurses'.override { unicodeSupport = false; })
-        zlib
-        libuuid
-        xorg.libSM
-        xorg.libICE
-        xorg.libXrender
-        xorg.libX11
-        xorg.libXext
-        xorg.libXtst
-        xorg.libXi
-      ]
-    );
-    profile = "source ${vivadoPath}/settings64.sh";
-    runScript = "vivado";
-  };
-  migen = pkgs.python3Packages.buildPythonPackage {
-    pname = "migen";
-    version = "unstable-2024-05-02";
-    src = pkgs.fetchFromGitHub {
-      owner = "m-labs";
-      repo = "migen";
-      rev = "4790bb577681a8c3a8d226bc196a4e5deb39e4df";
-      sha256 = "sha256-4DCHBUBfc/VA+7NW2Hr0+JP4NnKPru2uVJyZjCCk0Ws=";
-    };
-    format = "pyproject";
-    nativeBuildInputs = [ pkgs.python3Packages.setuptools ];
-    propagatedBuildInputs = with pkgs.python3Packages; [ colorama ];
-  };
-  asyncserial = pkgs.python3Packages.buildPythonPackage {
-    pname = "asyncserial";
-    version = "0.1";
-    src = pkgs.fetchFromGitHub {
-      owner = "m-labs";
-      repo = "asyncserial";
-      rev = "d95bc1d6c791b0e9785935d2f62f628eb5cdf98d";
-      sha256 = "0yzkka9jk3612v8gx748x6ziwykq5lr7zmr9wzkcls0v2yilqx9k";
-    };
-    propagatedBuildInputs = with pkgs.python3Packages; [ pyserial ];
-  };
-  misoc = pkgs.python3Packages.buildPythonPackage {
-    pname = "misoc";
-    version = "unstable-2021-10-10";
-    src = pkgs.fetchFromGitHub {
-      owner = "m-labs";
-      repo = "misoc";
-      rev = "f5203e406520874e15ab5d070058ef642fc57fd9";
-      sha256 = "sha256-/2XTejqj0Bo81HaTrlTSWwInnWwsuqnq+CURXbpIrkA=";
-      fetchSubmodules = true;
-    };
-    # TODO: fix misoc bitrot and re-enable tests
-    doCheck = false;
-    propagatedBuildInputs = with pkgs.python3Packages; [ pyserial jinja2 numpy asyncserial migen ];
-  };
-}

gluelogic/ise.nix

@@ -0,0 +1,31 @@
+# Install ISE in /opt and add to /etc/nixos/configuration.nix:
+#  nix.sandboxPaths = ["/opt"];
+
+{ pkgs, isePath ? "/opt/Xilinx/14.7/ISE_DS" }:
+
+let
+  makeXilinxEnv = name: pkgs.buildFHSUserEnv {
+    inherit name;
+    targetPkgs = pkgs: (
+      with pkgs; [
+        ncurses5
+        zlib
+        libuuid
+        xorg.libSM
+        xorg.libICE
+        xorg.libXrender
+        xorg.libX11
+        xorg.libXext
+        xorg.libXtst
+        xorg.libXi
+      ]
+    );
+    profile = 
+      ''
+      source ${isePath}/common/.settings64.sh ${isePath}/common
+      source ${isePath}/ISE/.settings64.sh ${isePath}/ISE
+      '';
+    runScript = name;
+  };
+in
+  pkgs.lib.attrsets.genAttrs ["xst" "ngdbuild" "cpldfit" "taengine" "hprep6"] makeXilinxEnv

gluelogic/mirny-legacy-almazny.diff

@@ -1,313 +0,0 @@
-diff --git a/Makefile b/Makefile
-index 667b8e7..ed97303 100644
---- a/Makefile
-+++ b/Makefile
-@@ -8,9 +8,15 @@ test:
- .PHONY: build
- build: build/mirny.vm6
- 
-+.PHONY: legacy_almazny
-+legacy_almazny: build/mirny_legacy_almazny.vm6
-+
- build/mirny.vm6: mirny.py mirny_cpld.py
- 	python mirny_impl.py
- 
-+build/mirny_legacy_almazny.vm6: mirny.py mirny_cpld.py
-+	python mirny_impl.py --legacy-almazny
-+
- REV:=$(shell git describe --always --abbrev=8 --dirty)
- 
- .PHONY: release
-diff --git a/README.md b/README.md
-index 1bea35a..5e93809 100644
---- a/README.md
-+++ b/README.md
-@@ -1,23 +1,39 @@
--# Mirny CPLD code
-+# Mirny CPLD gateware
- 
--[Mirny overview](https://github.com/sinara-hw/mirny/wiki)
-+## Hardware
-+
-+[![Hardware](https://github.com/sinara-hw/mirny/wiki/Mirny_v1.0_top_small.jpg)](https://github.com/sinara-hw/mirny/wiki)
- 
- [Mirny Schematics](https://github.com/sinara-hw/mirny/releases)
- 
- ## Building
- 
--Needs migen and ISE.
-+Needs [migen](https://github.com/m-labs/migen) and [Xilinx ISE](https://www.xilinx.com/products/design-tools/ise-design-suite.html). Assumes ISE is installed in ``/opt/Xilinx``.
- 
- ```
- make
--# and then look at/use flash.sh or make flash
--
--# or use fxload and xc3sprog:
--/sbin/fxload -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D /dev/bus/usb/001/*`cat /sys/bus/usb/devices/1-3/devnum` && sleep 10 && \
--xc3sprog -c xpc -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed:w
--# look for "Verify: Success"
- ```
- 
-+## Flashing
-+
-+With Digilent [JTAG HS2](https://store.digilentinc.com/jtag-hs2-programming-cable/) cable:
-+
-+  - download firmware to dongle. Manually (adjust USB bus as needed):
-+  ```
-+  /sbin/fxload -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D /dev/bus/usb/001/*`cat /sys/bus/usb/devices/1-3/devnum`
-+  ```
-+  or automatically via the ``udev`` rule:
-+  ```
-+  SUBSYSTEM=="usb", ACTION="add", ATTR{idVendor}=="0403", ATTR{idProduct}=="6014", ATTR{manufacturer}=="Digilent", RUN+="/usr/bin/fxload -v -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D $tempnode"
-+  ```
-+
-+  - install [xc3sprog](http://xc3sprog.sourceforge.net/)
-+
-+  - ``flash_xc3.sh jtaghs2``
-+
-+  - look for ``Verify: Success``
-+
-+
- # License
- 
- GPLv3+
-diff --git a/flash_xc3.sh b/flash_xc3.sh
-index 4c8a94c..c84b4d6 100755
---- a/flash_xc3.sh
-+++ b/flash_xc3.sh
-@@ -1,8 +1,9 @@
- #!/bin/bash
- 
- set -e
--set -x
- 
--/sbin/fxload -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D /dev/bus/usb/001/*`cat /sys/bus/usb/devices/1-7/devnum`
--sleep 7
--../xc3sprog/build/xc3sprog -c xpc -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed:w
-+XC3SPROG=xc3sprog
-+CABLE=${1-xpc}
-+
-+set -x
-+$XC3SPROG -c $CABLE -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed:w
-diff --git a/mirny.py b/mirny.py
-index 82edca2..6dc2612 100644
---- a/mirny.py
-+++ b/mirny.py
-@@ -153,7 +153,6 @@ class SR(Module):
-             ),
-         ]
- 
--
- def intersection(a, b):
-     (aa, am), (ba, bm) = a, b
-     # TODO
-@@ -182,26 +181,26 @@ class Mirny(Module):
-     SPI
-     ---
- 
--    SPI xfer is ADR(7), WE(1), DAT(REG: 16, ATT: 8, PLL: 32)
--
--    | ADR | TARGET |
--    |--------+--------|
--    | 0 | REG0     |
--    | 1 | REG1     |
--    | 2 | REG2     |
--    | 3 | REG3     |
--    | 4 | PLL0     |
--    | 5 | PLL1     |
--    | 6 | PLL2     |
--    | 7 | PLL3     |
--    | 8 | ATT0     |
--    | 9 | ATT1     |
--    | a | ATT2     |
--    | b | ATT3     |
--    | c | reserved |
--    | d | reserved |
--    | e | reserved |
--    | f | reserved |
-+    SPI xfer is ADR(7), WE(1), DAT(REG: 16, ATT: 8, PLL: 32, SR: 8)
-+
-+    | ADR | TARGET               |
-+    |-----+----------------------|
-+    | 0   | REG0                 |
-+    | 1   | REG1                 |
-+    | 2   | REG2                 |
-+    | 3   | REG3                 |
-+    | 4   | PLL0                 |
-+    | 5   | PLL1                 |
-+    | 6   | PLL2                 |
-+    | 7   | PLL3                 |
-+    | 8   | ATT0                 |
-+    | 9   | ATT1                 |
-+    | a   | ATT2                 |
-+    | b   | ATT3                 |
-+    | c   | (Legacy Almazny) SR1 |
-+    | d   | (Legacy Almazny) SR2 |
-+    | e   | (Legacy Almazny) SR3 |
-+    | f   | (Legacy Almazny) SR4 |
- 
-     The SPI interface is CPOL=0, CPHA=0, SPI mode 0, 4-wire, full fuplex.
- 
-@@ -223,8 +222,8 @@ class Mirny(Module):
-     | Name      | Width | Function                           |
-     |-----------+-------+------------------------------------|
-     | CE_N      | 4     | PLL chip enable (bar)              |
--    | CLK_SEL   | 2     | Selects CLK source: 0 OSC, 1 MMCX, |
--    |           |       | 2 reserved, 3 SMA                  |
-+    | CLK_SEL   | 2     | Selects CLK source:                |
-+    |           |       | 0 OSC, 1 reserved, 2 MMCX, 3 SMA   |
-     | DIV       | 2     | Clock divider configuration:       |
-     |           |       | 0: divide-by-one,                  |
-     |           |       | 1: reserved,                       |
-@@ -234,6 +233,7 @@ class Mirny(Module):
-     | FSEN_N    | 1     | LVDS fail safe, Type 2 (bar)       |
-     | MUXOUT_EEM| 1     | route MUXOUT to EEM[4:8]           |
-     | EEM_MEZZIO| 1     | route EEM[4:8] to MEZZ_IO[0:4]     |
-+    | ALMAZNY_OE| 1     | Almazny OE in legacy Almazny mode  |
- 
-     | Name      | Width | Function                           |
-     |-----------+-------+------------------------------------|
-@@ -250,7 +250,7 @@ class Mirny(Module):
-     The test points expose miscellaneous signals for debugging and are not part
-     of the protocol revision.
-     """
--    def __init__(self, platform):
-+    def __init__(self, platform, legacy_almazny=False):
-         self.eem = eem = []
-         for i in range(8):
-             tsi = TSTriple()
-@@ -292,7 +292,7 @@ class Mirny(Module):
-             self.sr.ext.cs.eq(eem[3].i),
-         ]
- 
--        regs = [REG(), REG(width=12), REG(width=4), REG()]
-+        regs = [REG(), REG(width=13), REG(width=4), REG()]
-         self.submodules += regs
-         for i, reg in enumerate(regs):
-             self.sr.connect(reg.bus, adr=i, mask=mask)
-@@ -310,23 +310,47 @@ class Mirny(Module):
-         clk = platform.request("clk")
-         clk_div = TSTriple()
-         self.specials += clk_div.get_tristate(clk.div)
--        # in_sel: 00: XO, 01: MMCX, 10: n/a (SMA+XO), 11: SMA
-+        # in_sel: 00: XO, 01: n/a (SMA+XO), 10: MMCX, 11: SMA
-         # dividers: 00(z): 1, 01(z): 1, 10(low): 2, 11(high) 4
-         self.comb += [
-             Cat(clk.in_sel, clk_div.o, clk_div.oe).eq(regs[1].write[4:8]),
-             platform.request("fsen").eq(~regs[1].write[9]),
-         ]
- 
--        for i, m in enumerate(platform.request("mezz_io")):
--            tsi = TSTriple()
--            self.specials += tsi.get_tristate(m)
-+        if legacy_almazny:
-+            almazny_io = platform.request("legacy_almazny_common")
-+            almazny_adr = 0b1100  # 1100 - and then 1101, 1110, 1111 for sr 1-4
-+            ext = Record(ext_layout)
-+            self.sr.connect_ext(ext, almazny_adr, almazny_adr)
-+            latches = AsyncRst(width=4, reset=0xF)
-+            self.submodules += latches
-+
-             self.comb += [
--                tsi.o.eq(regs[3].write[i] | (0 if i >= 4 else
--                    (regs[1].write[11] & eem[i + 4].i))),
--                regs[3].read[i].eq(tsi.i),
--                tsi.oe.eq(regs[3].write[i + 8]),
--                regs[3].read[i + 8].eq(tsi.oe),
-+                latches.ce.eq(ext.cs),
-+                almazny_io.clk.eq(ext.sck),
-+                almazny_io.mosi.eq(ext.sdi),
-+                almazny_io.srclr.eq(1)
-             ]
-+            
-+            for i in range(4):
-+                almazny = platform.request("legacy_almazny", i)
-+                self.sync += latches.i[i].eq(self.sr.bus.adr[:2] != i)
-+                self.comb += [ 
-+                    almazny.latch.eq(latches.o[i]),
-+                    almazny.noe.eq(~regs[1].write[12])
-+                ]
-+
-+        else:
-+            for i, m in enumerate(platform.request("mezz_io")):
-+                tsi = TSTriple()
-+                self.specials += tsi.get_tristate(m)
-+                self.comb += [
-+                    tsi.o.eq(regs[3].write[i] | (0 if i >= 4 else
-+                        (regs[1].write[11] & eem[i + 4].i))),
-+                    regs[3].read[i].eq(tsi.i),
-+                    tsi.oe.eq(regs[3].write[i + 8]),
-+                    regs[3].read[i + 8].eq(tsi.oe),
-+                ]
- 
-         for i in range(4):
-             rf_sw = platform.request("rf_sw", i)
-diff --git a/mirny_cpld.py b/mirny_cpld.py
-index 70fc164..a688d89 100644
---- a/mirny_cpld.py
-+++ b/mirny_cpld.py
-@@ -16,9 +16,33 @@ _io = [
-         # fail save LVDS enable, LVDS mode selection
-         # high: type 2 receiver, failsafe low
-         ("fsen", 0, Pins("P80")),
--
-+        
-+        # IO from 0 to 7
-         ("mezz_io", 0, Pins("P57 P58 P59 P60 P61 P64 P68 P69")),
- 
-+        # legacy (v1.0-1.1) Almazny pins
-+        ("legacy_almazny_common", 0, 
-+            Subsignal("mosi", Pins("P94")),
-+            Subsignal("clk", Pins("P97")),
-+            Subsignal("srclr", Pins("P60")),
-+        ),
-+        ("legacy_almazny", 0,
-+            Subsignal("latch", Pins("P96")),
-+            Subsignal("noe", Pins("P95")),
-+        ),
-+        ("legacy_almazny", 1,
-+            Subsignal("latch", Pins("P100")),
-+            Subsignal("noe", Pins("P98")),
-+        ),
-+        ("legacy_almazny", 2,
-+            Subsignal("latch", Pins("P92")),
-+            Subsignal("noe", Pins("P101")),
-+        ),
-+        ("legacy_almazny", 3,
-+            Subsignal("latch", Pins("P57")),
-+            Subsignal("noe", Pins("P58")),
-+        ),
-+
-         ("clk", 0,
-             Subsignal("div", Pins("P53")),
-             Subsignal("in_sel", Pins("P54 P56")),
-diff --git a/mirny_impl.py b/mirny_impl.py
-index 0c42b0b..d7022dc 100644
---- a/mirny_impl.py
-+++ b/mirny_impl.py
-@@ -1,10 +1,23 @@
-+import argparse
-+
-+def get_argparser():
-+    parser = argparse.ArgumentParser(
-+        description="Mirny CPLD firmware"
-+    )
-+    parser.add_argument("--legacy-almazny", action="store_true", default=False)
-+
-+    return parser
-+
- def main():
-     from mirny_cpld import Platform
-     from mirny import Mirny
- 
-+    args = get_argparser().parse_args()
-+
-     p = Platform()
--    mirny = Mirny(p)
--    p.build(mirny, build_name="mirny", mode="cpld")
-+    mirny = Mirny(p, args.legacy_almazny)
-+    build_name = "mirny" if not args.legacy_almazny else "mirny_legacy_almazny"
-+    p.build(mirny, build_name=build_name, mode="cpld")
- 
- 
- if __name__ == "__main__":

hydra/artiq.json

@@ -1,140 +1,93 @@
 {
-    "main-nac3": {
+    "fast-beta": {
         "enabled": 1,
-        "type": 1,
         "hidden": false,
-        "description": "Main ARTIQ packages (with NAC3)",
+        "description": "Core ARTIQ packages to build fast for CI purposes (beta version)",
-        "flake": "git+https://github.com/m-labs/artiq.git?ref=nac3",
+        "nixexprinput": "nixScripts",
+        "nixexprpath": "artiq-fast.nix",
         "checkinterval": 300,
         "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 50
+        "keepnr": 10,
+        "inputs": {
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
+            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
+            "artiqSrc": { "type": "git", "value": "git://github.com/m-labs/artiq.git master 1", "emailresponsible": false }
+        }
     },
-    "nac3": {
+    "board-generated-beta": {
         "enabled": 1,
-        "type": 1,
         "hidden": false,
-        "description": "Third generation ARTIQ compiler",
+        "description": "Generated code for ARTIQ targets (beta version)",
-        "flake": "git+https://git.m-labs.hk/M-Labs/nac3.git",
+        "nixexprinput": "nixScripts",
+        "nixexprpath": "artiq-board-generated",
+        "checkinterval": 86400,
+        "schedulingshares": 1,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 10,
+        "inputs": {
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
+            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
+            "sinaraSystemsSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/sinara-systems.git master 1", "emailresponsible": false },
+            "artiq-fast": { "type": "sysbuild", "value": "artiq:fast-beta:generated-nix", "emailresponsible": false }
+        }
+    },
+    "full-beta": {
+        "enabled": 1,
+        "hidden": false,
+        "description": "Full set of ARTIQ packages (beta version)",
+        "nixexprinput": "nixScripts",
+        "nixexprpath": "artiq-full.nix",
+        "checkinterval": 86400,
+        "schedulingshares": 1,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 10,
+        "inputs": {
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
+            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
+            "beta": { "type": "boolean", "value": "true" },
+            "artiq-board-generated": { "type": "sysbuild", "value": "artiq:board-generated-beta:generated-nix", "emailresponsible": false }
+        }
+    },
+    "fast": {
+        "enabled": 1,
+        "hidden": false,
+        "description": "Core ARTIQ packages to build fast for CI purposes",
+        "nixexprinput": "nixScripts",
+        "nixexprpath": "artiq-fast.nix",
         "checkinterval": 300,
         "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 50
+        "keepnr": 10,
+        "inputs": {
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.03", "emailresponsible": false },
+            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
+            "artiqSrc": { "type": "git", "value": "git://github.com/m-labs/artiq.git release-5 1", "emailresponsible": false }
+        }
     },
-
+    "full": {
-    "main-beta": {
         "enabled": 1,
-        "type": 1,
         "hidden": false,
-        "description": "Main ARTIQ packages (beta version)",
+        "description": "Full set of ARTIQ packages",
-        "flake": "git+https://github.com/m-labs/artiq.git",
+        "nixexprinput": "nixScripts",
-        "checkinterval": 300,
+        "nixexprpath": "artiq-full.nix",
-        "schedulingshares": 10,
+        "checkinterval": 86400,
+        "schedulingshares": 1,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 50
+        "keepnr": 10,
+        "inputs": {
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.03", "emailresponsible": false },
+            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
+            "sinaraSystemsSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/sinara-systems.git master 1", "emailresponsible": false },
+            "beta": { "type": "boolean", "value": "false" },
+            "artiq-fast": { "type": "sysbuild", "value": "artiq:fast:generated-nix", "emailresponsible": false }
+        }
     },
-    "extra-beta": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Additional ARTIQ packages (beta version)",
-        "flake": "git+https://git.m-labs.hk/m-labs/artiq-extrapkg.git",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-    "zynq-beta": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "ARTIQ on Zynq-7000 (beta version)",
-        "flake": "git+https://git.m-labs.hk/m-labs/artiq-zynq.git",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-
-    "main": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Main ARTIQ packages (stable version)",
-        "flake": "git+https://github.com/m-labs/artiq.git?ref=release-8",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-    "extra": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Additional ARTIQ packages (stable version)",
-        "flake": "git+https://git.m-labs.hk/m-labs/artiq-extrapkg.git?ref=release-8",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-    "zynq": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "ARTIQ on Zynq-7000 (stable version)",
-        "flake": "git+https://git.m-labs.hk/m-labs/artiq-zynq.git?ref=release-8",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-
-    "main-legacy": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Main ARTIQ packages (legacy version)",
-        "flake": "git+https://github.com/m-labs/artiq.git?ref=release-7",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-    "extra-legacy": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Additional ARTIQ packages (legacy version)",
-        "flake": "git+https://git.m-labs.hk/m-labs/artiq-extrapkg.git?ref=release-7",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-    "zynq-legacy": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "ARTIQ on Zynq-7000 (legacy version)",
-        "flake": "git+https://git.m-labs.hk/m-labs/artiq-zynq.git?ref=release-7",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-
     "gluelogic": {
         "enabled": 1,
         "hidden": false,
@@ -145,39 +98,33 @@
         "schedulingshares": 1,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 50,
+        "keepnr": 10,
         "inputs": {
-            "nixpkgs": { "type": "git", "value": "https://github.com/NixOS/nixpkgs.git nixos-24.05", "emailresponsible": false },
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
             "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "urukulSrc": { "type": "git", "value": "https://github.com/quartiq/urukul.git", "emailresponsible": false },
+            "urukulSrc": { "type": "git", "value": "git://github.com/quartiq/urukul", "emailresponsible": false },
-            "mirnySrc": { "type": "git", "value": "https://github.com/quartiq/mirny.git", "emailresponsible": false },
+            "mirnySrc": { "type": "git", "value": "git://github.com/quartiq/mirny", "emailresponsible": false },
-            "fastinoSrc": { "type": "git", "value": "https://github.com/quartiq/fastino.git", "emailresponsible": false },
+            "fastinoSrc": { "type": "git", "value": "git://github.com/quartiq/fastino", "emailresponsible": false },
-            "phaserSrc": { "type": "git", "value": "https://github.com/quartiq/phaser.git", "emailresponsible": false }
+            "phaserSrc": { "type": "git", "value": "git://github.com/quartiq/phaser", "emailresponsible": false }
         }
     },
-
+    "zynq": {
-    "sipyco": {
         "enabled": 1,
-        "type": 1,
         "hidden": false,
-        "description": "Simple Python Communications",
+        "description": "ARTIQ on Zynq",
-        "flake": "github:m-labs/sipyco",
+        "nixexprinput": "nixScripts",
-        "checkinterval": 600,
+        "nixexprpath": "zynq.nix",
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 50
-    },
-    "zynq-rs": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Bare-metal Rust on Zynq-7000",
-        "flake": "git+https://git.m-labs.hk/m-labs/zynq-rs.git",
         "checkinterval": 300,
-        "schedulingshares": 10,
+        "schedulingshares": 1,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 50
+        "keepnr": 10,
+        "inputs": {
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
+            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
+            "artiq-fast": { "type": "sysbuild", "value": "artiq:fast-beta:generated-nix", "emailresponsible": false },
+            "zynq-rs": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/zynq-rs.git", "emailresponsible": false },
+            "artiq-zynq": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/artiq-zynq.git", "emailresponsible": false }
+        }
     }
 }

hydra/mcu.json

@@ -1,57 +1,23 @@
 {
-    "mcu-contrib": {
+    "mcu": {
         "enabled": 1,
         "hidden": false,
-        "description": "Third-party MCU firmware",
+        "description": "MCU firmware",
         "nixexprinput": "nixScripts",
-        "nixexprpath": "mcu-contrib.nix",
+        "nixexprpath": "mcu.nix",
-        "checkinterval": 7200,
+        "checkinterval": 300,
         "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
         "keepnr": 10,
         "inputs": {
-            "nixpkgs": { "type": "git", "value": "https://github.com/NixOS/nixpkgs.git nixos-24.05", "emailresponsible": false },
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
-            "mozillaOverlay": { "type": "git", "value": "https://github.com/mozilla/nixpkgs-mozilla.git", "emailresponsible": false },
+            "mozillaOverlay": { "type": "git", "value": "git://github.com/mozilla/nixpkgs-mozilla.git", "emailresponsible": false },
             "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "stabilizerSrc": { "type": "git", "value": "https://github.com/quartiq/stabilizer.git main", "emailresponsible": false },
+            "stabilizerSrc": { "type": "git", "value": "git://github.com/quartiq/stabilizer.git", "emailresponsible": false },
-            "saymaMmcSrc": { "type": "git", "value": "https://github.com/sinara-hw/openMMC.git sayma-devel", "emailresponsible": false }
+            "thermostatSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/thermostat.git", "emailresponsible": false },
-        }
+            "humpbackDdsSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/humpback-dds.git", "emailresponsible": false },
-    },
+            "saymaMmcSrc": { "type": "git", "value": "git://github.com/sinara-hw/openMMC sayma-devel", "emailresponsible": false }
-    "thermostat": {
+        }
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Firmware for the Sinara 8451 Thermostat",
-        "flake": "git+https://git.m-labs.hk/M-Labs/thermostat.git",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 10
-    },
-    "humpback-dds": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Firmware for Humpback-DDS",
-        "flake": "git+https://git.m-labs.hk/M-Labs/humpback-dds.git",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 10
-    },
-    "kirdy": {
-        "enabled": 1,
-        "type": 1,
-        "hidden": false,
-        "description": "Firmware for the Sinara 1550 Kirdy laser diode driver",
-        "flake": "git+https://git.m-labs.hk/M-Labs/kirdy.git",
-        "checkinterval": 300,
-        "schedulingshares": 10,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 10
     }
 }

hydra/web.json

@@ -2,7 +2,7 @@
     "web": {
         "enabled": 1,
         "hidden": false,
-        "description": "Websites",
+        "description": "M-Labs website",
         "nixexprinput": "nixScripts",
         "nixexprpath": "web.nix",
         "checkinterval": 300,
@@ -11,10 +11,9 @@
         "emailoverride": "",
         "keepnr": 10,
         "inputs": {
-            "nixpkgs": { "type": "git", "value": "https://github.com/NixOS/nixpkgs.git nixos-24.05", "emailresponsible": false },
+            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.03", "emailresponsible": false },
             "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "webSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/web2019.git", "emailresponsible": false },
+            "webSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/web2019.git", "emailresponsible": false }
-            "nmigenSrc": { "type": "git", "value": "https://gitlab.com/nmigen/nmigen.git", "emailresponsible": false }
         }
     }
 }

mcu-contrib/default.nix

@@ -1,104 +0,0 @@
-{ # Use master branch of the overlay by default
-  mozillaOverlay ? import (builtins.fetchTarball https://github.com/mozilla/nixpkgs-mozilla/archive/master.tar.gz),
-}:
-
-let
-  pkgs = import <nixpkgs> { overlays = [ mozillaOverlay ]; };
-  targets = [
-    "thumbv7em-none-eabihf"
-  ];
-  rustManifest = pkgs.fetchurl {
-    url = "https://static.rust-lang.org/dist/2024-06-13/channel-rust-stable.toml";
-    sha256 = "sha256-Ngiz76YP4HTY75GGdH2P+APE/DEIx2R/Dn+BwwOyzZU=";
-  };
-  rustChannelOfTargets = _channel: _date: targets:
-    (pkgs.lib.rustLib.fromManifestFile rustManifest {
-      inherit (pkgs) stdenv lib fetchurl patchelf;
-      }).rust.override {
-      inherit targets;
-      extensions = ["rust-src"];
-    };
-  rust = rustChannelOfTargets "nightly" null targets;
-  rustPlatform = pkgs.recurseIntoAttrs (pkgs.makeRustPlatform {
-    rustc = rust;
-    cargo = rust;
-  });
-
-  buildStm32Firmware = { name, src, cargoDepsName ? name, patchPhase ? "", extraNativeBuildInputs ? [], checkPhase ? "", doCheck ? true, binaryName ? name, extraCargoBuildArgs ? "", outputHashes ? {} }:
-    rustPlatform.buildRustPackage rec {
-      inherit name cargoDepsName;
-      version = "0.0.0";
-
-      inherit src;
-
-      cargoLock = { lockFile = "${src}/Cargo.lock"; inherit outputHashes; };
-
-      inherit patchPhase;
-      nativeBuildInputs = [ pkgs.llvm ] ++ extraNativeBuildInputs;
-      buildPhase = ''
-        export CARGO_HOME=$(mktemp -d cargo-home.XXX)
-        cargo build --release --bin ${binaryName} ${extraCargoBuildArgs}
-      '';
-
-      inherit checkPhase doCheck;
-      # binaryName defaults to the `name` arg (i.e. the Rust package name);
-      # it is used as the Cargo binary filename
-      installPhase = ''
-        mkdir -p $out $out/nix-support
-        cp target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.elf
-        echo file binary-dist $out/${name}.elf >> $out/nix-support/hydra-build-products
-        llvm-objcopy -O binary target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.bin
-        echo file binary-dist $out/${name}.bin >> $out/nix-support/hydra-build-products
-      '';
-
-      dontFixup = true;
-      auditable = false;
-    };
-in
-  pkgs.lib.attrsets.mapAttrs'
-    (name: value: pkgs.lib.attrsets.nameValuePair ("stabilizer-" + name)
-    (buildStm32Firmware ({
-      name = "stabilizer-" + name;
-      # If binaryName is not specified, use the attribute name as binaryName by default.
-      binaryName = name;
-      cargoDepsName = "stabilizer";
-      src = <stabilizerSrc>;
-      patchPhase = ''
-        patch -p1 < ${./pounder-725.diff}
-      '';
-      doCheck = false;
-      outputHashes = {
-        "menu-0.6.0" = "sha256-Zilj27J4a/T/Je2qJr6igFj2OEw0/4fU4f0t+afm4TY=";
-      };
-    } // value))) {
-      dual-iir = {};
-      dual-iir-pounder_v1_0 = {
-        binaryName = "dual-iir";
-        extraCargoBuildArgs = "--features pounder_v1_0";
-      };
-      lockin = {};
-    } //
-  {
-    # openMMC build system breaks if host compiler is not available, so do not use stdenvNoCC here
-    sayma-mmc = pkgs.stdenv.mkDerivation {
-      name = "sayma-mmc";
-      src = <saymaMmcSrc>;
-      phases = [ "unpackPhase" "buildPhase" "installPhase" ];
-      nativeBuildInputs = [ pkgs.cmake pkgs.gcc-arm-embedded ];
-      buildPhase =
-        ''
-        mkdir build
-        cd build
-        cmake .. -DBOARD=sayma -DBOARD_RTM=sayma -DVERSION= -DTARGET_CONTROLLER=LPC1776 -DCMAKE_BUILD_TYPE=Debug
-        make
-        '';
-      installPhase =
-        ''
-        mkdir $out
-        cp out/* $out
-        mkdir -p $out $out/nix-support
-        echo file binary-dist $out/openMMC.axf >> $out/nix-support/hydra-build-products
-        echo file binary-dist $out/openMMC.bin >> $out/nix-support/hydra-build-products
-        '';
-    };
-  }

mcu-contrib/pounder-725.diff

@@ -1,811 +0,0 @@
-diff --git a/ad9959/src/lib.rs b/ad9959/src/lib.rs
-index 025f7d4f..59578cce 100644
---- a/ad9959/src/lib.rs
-+++ b/ad9959/src/lib.rs
-@@ -2,8 +2,24 @@
- 
- use bit_field::BitField;
- use bitflags::bitflags;
-+use core::ops::Range;
- use embedded_hal::{blocking::delay::DelayUs, digital::v2::OutputPin};
- 
-+/// The minimum reference clock input frequency with REFCLK multiplier disabled.
-+const MIN_REFCLK_FREQUENCY: f32 = 1e6;
-+/// The minimum reference clock input frequency with REFCLK multiplier enabled.
-+const MIN_MULTIPLIED_REFCLK_FREQUENCY: f32 = 10e6;
-+/// The system clock frequency range with high gain configured for the internal VCO.
-+const HIGH_GAIN_VCO_RANGE: Range<f32> = Range {
-+    start: 255e6,
-+    end: 500e6,
-+};
-+/// The system clock frequency range with low gain configured for the internal VCO.
-+const LOW_GAIN_VCO_RANGE: Range<f32> = Range {
-+    start: 100e6,
-+    end: 160e6,
-+};
-+
- /// A device driver for the AD9959 direct digital synthesis (DDS) chip.
- ///
- /// This chip provides four independently controllable digital-to-analog output sinusoids with
-@@ -218,23 +234,17 @@ impl<I: Interface> Ad9959<I> {
-         reference_clock_frequency: f32,
-         multiplier: u8,
-     ) -> Result<f32, Error> {
-+        let frequency =
-+            validate_clocking(reference_clock_frequency, multiplier)?;
-         self.reference_clock_frequency = reference_clock_frequency;
- 
--        if multiplier != 1 && !(4..=20).contains(&multiplier) {
--            return Err(Error::Bounds);
--        }
--
--        let frequency = multiplier as f32 * self.reference_clock_frequency;
--        if frequency > 500_000_000.0f32 {
--            return Err(Error::Frequency);
--        }
--
-         // TODO: Update / disable any enabled channels?
-         let mut fr1: [u8; 3] = [0, 0, 0];
-         self.read(Register::FR1, &mut fr1)?;
-         fr1[0].set_bits(2..=6, multiplier);
- 
--        let vco_range = frequency > 255e6;
-+        let vco_range = HIGH_GAIN_VCO_RANGE.contains(&frequency)
-+            || frequency == HIGH_GAIN_VCO_RANGE.end;
-         fr1[0].set_bit(7, vco_range);
- 
-         self.write(Register::FR1, &fr1)?;
-@@ -365,9 +375,7 @@ impl<I: Interface> Ad9959<I> {
-         channel: Channel,
-         phase_turns: f32,
-     ) -> Result<f32, Error> {
--        let phase_offset: u16 =
--            (phase_turns * (1 << 14) as f32) as u16 & 0x3FFFu16;
--
-+        let phase_offset = phase_to_pow(phase_turns)?;
-         self.modify_channel(
-             channel,
-             Register::CPOW0,
-@@ -513,6 +521,108 @@ impl<I: Interface> Ad9959<I> {
-     }
- }
- 
-+/// Validate the internal system clock configuration of the chip.
-+///
-+/// Arguments:
-+/// * `reference_clock_frequency` - The reference clock frequency provided to the AD9959 core.
-+/// * `multiplier` - The frequency multiplier of the system clock. Must be 1 or 4-20.
-+///
-+/// Returns:
-+/// The system clock frequency to be configured.
-+pub fn validate_clocking(
-+    reference_clock_frequency: f32,
-+    multiplier: u8,
-+) -> Result<f32, Error> {
-+    // The REFCLK frequency must be at least 1 MHz with REFCLK multiplier disabled.
-+    if reference_clock_frequency < MIN_REFCLK_FREQUENCY {
-+        return Err(Error::Bounds);
-+    }
-+    // If the REFCLK multiplier is enabled, the multiplier (FR1[22:18]) must be between 4 to 20.
-+    // Alternatively, the clock multiplier can be disabled. The multiplication factor is 1.
-+    if multiplier != 1 && !(4..=20).contains(&multiplier) {
-+        return Err(Error::Bounds);
-+    }
-+    // If the REFCLK multiplier is enabled, the REFCLK frequency must be at least 10 MHz.
-+    if multiplier != 1
-+        && reference_clock_frequency < MIN_MULTIPLIED_REFCLK_FREQUENCY
-+    {
-+        return Err(Error::Bounds);
-+    }
-+    let frequency = multiplier as f32 * reference_clock_frequency;
-+    // SYSCLK frequency between 255 MHz and 500 MHz (inclusive) is valid with high range VCO
-+    if HIGH_GAIN_VCO_RANGE.contains(&frequency)
-+        || frequency == HIGH_GAIN_VCO_RANGE.end
-+    {
-+        return Ok(frequency);
-+    }
-+
-+    // SYSCLK frequency between 100 MHz and 160 MHz (inclusive) is valid with low range VCO
-+    if LOW_GAIN_VCO_RANGE.contains(&frequency)
-+        || frequency == LOW_GAIN_VCO_RANGE.end
-+    {
-+        return Ok(frequency);
-+    }
-+
-+    // When the REFCLK multiplier is disabled, SYSCLK frequency can go below 100 MHz
-+    if multiplier == 1 && (0.0..=LOW_GAIN_VCO_RANGE.start).contains(&frequency)
-+    {
-+        return Ok(frequency);
-+    }
-+
-+    Err(Error::Frequency)
-+}
-+
-+/// Convert and validate frequency into frequency tuning word.
-+///
-+/// Arguments:
-+/// * `dds_frequency` - The DDS frequency to be converted and validated.
-+/// * `system_clock_frequency` - The system clock frequency of the AD9959 core.
-+///
-+/// Returns:
-+/// The corresponding frequency tuning word.
-+pub fn frequency_to_ftw(
-+    dds_frequency: f32,
-+    system_clock_frequency: f32,
-+) -> Result<u32, Error> {
-+    // Output frequency should not exceed the Nyquist's frequency.
-+    if !(0.0..=(system_clock_frequency / 2.0)).contains(&dds_frequency) {
-+        return Err(Error::Bounds);
-+    }
-+    // The function for channel frequency is `f_out = FTW * f_s / 2^32`, where FTW is the
-+    // frequency tuning word and f_s is the system clock rate.
-+    Ok(((dds_frequency / system_clock_frequency) * (1u64 << 32) as f32) as u32)
-+}
-+
-+/// Convert phase into phase offset word.
-+///
-+/// Arguments:
-+/// * `phase_turns` - The normalized number of phase turns of a DDS channel.
-+///
-+/// Returns:
-+/// The corresponding phase offset word.
-+pub fn phase_to_pow(phase_turns: f32) -> Result<u16, Error> {
-+    Ok((phase_turns * (1 << 14) as f32) as u16 & 0x3FFFu16)
-+}
-+
-+/// Convert amplitude into amplitude control register values.
-+///
-+/// Arguments:
-+/// * `amplitude` - The normalized amplitude of a DDS channel.
-+///
-+/// Returns:
-+/// The corresponding value in the amplitude control register.
-+pub fn amplitude_to_acr(amplitude: f32) -> Result<u32, Error> {
-+    if !(0.0..=1.0).contains(&amplitude) {
-+        return Err(Error::Bounds);
-+    }
-+
-+    let acr: u32 = *0u32
-+        .set_bits(0..=9, ((amplitude * (1 << 10) as f32) as u32) & 0x3FF)
-+        .set_bit(12, amplitude != 1.0);
-+
-+    Ok(acr as u32)
-+}
-+
- /// Represents a means of serializing a DDS profile for writing to a stream.
- pub struct ProfileSerializer {
-     // heapless::Vec<u8, 32>, especially its extend_from_slice() is slow
-@@ -568,6 +678,39 @@ impl ProfileSerializer {
-         }
-     }
- 
-+    /// Update the system clock configuration.
-+    ///
-+    /// # Args
-+    /// * `reference_clock_frequency` - The reference clock frequency provided to the AD9959 core.
-+    /// * `multiplier` - The frequency multiplier of the system clock. Must be 1 or 4-20.
-+    ///
-+    /// # Limitations
-+    /// The correctness of the FR1 register setting code rely on FR1\[0:17\] staying 0.
-+    pub fn set_system_clock(
-+        &mut self,
-+        reference_clock_frequency: f32,
-+        multiplier: u8,
-+    ) -> Result<f32, Error> {
-+        let frequency = reference_clock_frequency * multiplier as f32;
-+
-+        // The enabled channel will be updated after clock reconfig
-+        let mut fr1 = [0u8; 3];
-+
-+        // The ad9959 crate does not modify FR1[0:17]. These bits keep their default value.
-+        // These bits by default are 0.
-+        // Reading the register then update is not possible to implement in a serializer, where
-+        // many QSPI writes are performed in burst. Switching between read and write requires
-+        // breaking the QSPI indirect write mode and switch into the QSPI indirect read mode.
-+        fr1[0].set_bits(2..=6, multiplier);
-+
-+        // Frequencies within the VCO forbidden range (160e6, 255e6) are already rejected.
-+        let vco_range = HIGH_GAIN_VCO_RANGE.contains(&frequency);
-+        fr1[0].set_bit(7, vco_range);
-+
-+        self.add_write(Register::FR1, &fr1);
-+        Ok(frequency)
-+    }
-+
-     /// Add a register write to the serialization data.
-     fn add_write(&mut self, register: Register, value: &[u8]) {
-         let data = &mut self.data[self.index..];
-diff --git a/src/bin/dual-iir.rs b/src/bin/dual-iir.rs
-index ea566e14..84bde34a 100644
---- a/src/bin/dual-iir.rs
-+++ b/src/bin/dual-iir.rs
-@@ -28,7 +28,7 @@
- #![no_std]
- #![no_main]
- 
--use core::mem::MaybeUninit;
-+use core::mem::{MaybeUninit, size_of};
- use core::sync::atomic::{fence, Ordering};
- use serde::{Deserialize, Serialize};
- 
-@@ -47,6 +47,8 @@ use stabilizer::{
-         dac::{Dac0Output, Dac1Output, DacCode},
-         hal,
-         signal_generator::{self, SignalGenerator},
-+        pounder::{ClockConfig, PounderConfig},
-+        setup::PounderDevices as Pounder,
-         timers::SamplingTimer,
-         DigitalInput0, DigitalInput1, SerialTerminal, SystemTimer, Systick,
-         UsbDevice, AFE0, AFE1,
-@@ -179,6 +181,16 @@ pub struct DualIir {
-     /// See [signal_generator::BasicConfig#miniconf]
-     #[tree(depth = 2)]
-     source: [signal_generator::BasicConfig; 2],
-+
-+    /// Specifies the config for pounder DDS clock configuration, DDS channels & attenuations
-+    ///
-+    /// # Path
-+    /// `pounder`
-+    ///
-+    /// # Value
-+    /// See [PounderConfig#miniconf]
-+    #[tree]
-+    pounder: Option<PounderConfig>,
- }
- 
- impl Default for DualIir {
-@@ -206,6 +218,8 @@ impl Default for DualIir {
-             source: Default::default(),
- 
-             stream: Default::default(),
-+
-+            pounder: None.into(),
-         }
-     }
- }
-@@ -222,6 +236,7 @@ mod app {
-         active_settings: DualIir,
-         telemetry: TelemetryBuffer,
-         source: [SignalGenerator; 2],
-+        pounder: Option<Pounder>,
-     }
- 
-     #[local]
-@@ -233,6 +248,7 @@ mod app {
-         adcs: (Adc0Input, Adc1Input),
-         dacs: (Dac0Output, Dac1Output),
-         iir_state: [[[f32; 4]; IIR_CASCADE_LENGTH]; 2],
-+        dds_clock_state: Option<ClockConfig>,
-         generator: FrameGenerator,
-         cpu_temp_sensor: stabilizer::hardware::cpu_temp_sensor::CpuTempSensor,
-     }
-@@ -242,7 +258,7 @@ mod app {
-         let clock = SystemTimer::new(|| Systick::now().ticks());
- 
-         // Configure the microcontroller
--        let (stabilizer, _pounder) = hardware::setup::setup::<Settings, 4>(
-+        let (mut stabilizer, pounder) = hardware::setup::setup::<Settings, 4>(
-             c.core,
-             c.device,
-             clock,
-@@ -261,6 +277,13 @@ mod app {
- 
-         let generator = network.configure_streaming(StreamFormat::AdcDacData);
- 
-+        let dds_clock_state = pounder.as_ref().map(|_| ClockConfig::default());
-+        if pounder.is_some() {
-+            stabilizer.settings.dual_iir
-+                .pounder
-+                .replace(PounderConfig::default());
-+        }
-+
-         let shared = Shared {
-             usb: stabilizer.usb,
-             network,
-@@ -279,6 +302,7 @@ mod app {
-                 ),
-             ],
-             settings: stabilizer.settings,
-+            pounder
-         };
- 
-         let mut local = Local {
-@@ -289,6 +313,7 @@ mod app {
-             adcs: stabilizer.adcs,
-             dacs: stabilizer.dacs,
-             iir_state: [[[0.; 4]; IIR_CASCADE_LENGTH]; 2],
-+            dds_clock_state,
-             generator,
-             cpu_temp_sensor: stabilizer.temperature_sensor,
-         };
-@@ -458,7 +483,7 @@ mod app {
-         }
-     }
- 
--    #[task(priority = 1, local=[afes], shared=[network, settings, active_settings, source])]
-+    #[task(priority = 1, local=[afes, dds_clock_state], shared=[network, settings, active_settings, source, pounder])]
-     async fn settings_update(mut c: settings_update::Context) {
-         c.shared.settings.lock(|settings| {
-             c.local.afes.0.set_gain(settings.dual_iir.afe[0]);
-@@ -480,6 +505,17 @@ mod app {
-                     ),
-                 }
-             }
-+        // Update Pounder configurations
-+        c.shared.pounder.lock(|pounder| {
-+            if let Some(pounder) = pounder {
-+                let pounder_settings = settings.dual_iir.pounder.as_ref().unwrap();
-+                // let mut clocking = c.local.dds_clock_state;
-+                pounder.update_dds(
-+                    *pounder_settings,
-+                    c.local.dds_clock_state.as_mut().unwrap(),
-+                );
-+            }
-+        });
- 
-             c.shared
-                 .network
-@@ -491,21 +527,30 @@ mod app {
-         });
-     }
- 
--    #[task(priority = 1, shared=[network, settings, telemetry], local=[cpu_temp_sensor])]
-+    #[task(priority = 1, shared=[network, settings, telemetry, pounder], local=[cpu_temp_sensor])]
-     async fn telemetry(mut c: telemetry::Context) {
-         loop {
-             let telemetry = c.shared.telemetry.lock(|telemetry| *telemetry);
- 
--            let (gains, telemetry_period) =
-+            let (gains, telemetry_period, pounder_config) =
-                 c.shared.settings.lock(|settings| {
--                    (settings.dual_iir.afe, settings.dual_iir.telemetry_period)
-+                    (
-+                        settings.dual_iir.afe,
-+                        settings.dual_iir.telemetry_period,
-+                        settings.dual_iir.pounder
-+                    )
-                 });
- 
-+            let pounder_telemetry = c.shared.pounder.lock(|pounder| {
-+                pounder.as_mut().map(|pdr| pdr.get_telemetry(pounder_config.unwrap()))
-+            });
-+
-             c.shared.network.lock(|net| {
-                 net.telemetry.publish(&telemetry.finalize(
-                     gains[0],
-                     gains[1],
-                     c.local.cpu_temp_sensor.get_temperature().unwrap(),
-+                    pounder_telemetry,
-                 ))
-             });
- 
-diff --git a/src/bin/lockin.rs b/src/bin/lockin.rs
-index 3ddecd7c..77a7474b 100644
---- a/src/bin/lockin.rs
-+++ b/src/bin/lockin.rs
-@@ -29,7 +29,7 @@
- 
- use core::{
-     convert::TryFrom,
--    mem::MaybeUninit,
-+    mem::{MaybeUninit, size_of},
-     sync::atomic::{fence, Ordering},
- };
- 
-@@ -547,6 +547,7 @@ mod app {
-                     gains[0],
-                     gains[1],
-                     c.local.cpu_temp_sensor.get_temperature().unwrap(),
-+                    None,
-                 ))
-             });
- 
-diff --git a/src/hardware/pounder/attenuators.rs b/src/hardware/pounder/attenuators.rs
-index cfd08b7f..2570f506 100644
---- a/src/hardware/pounder/attenuators.rs
-+++ b/src/hardware/pounder/attenuators.rs
-@@ -52,10 +52,9 @@ pub trait AttenuatorInterface {
-     fn get_attenuation(&mut self, channel: Channel) -> Result<f32, Error> {
-         let mut channels = [0_u8; 4];
- 
--        // Reading the data always shifts data out of the staging registers, so we perform a
--        // duplicate write-back to ensure the staging register is always equal to the output
--        // register.
--        self.transfer_attenuators(&mut channels)?;
-+        // Reading the data always shifts data out of the staging registers, so a duplicate
-+        // write-back will be performed to ensure the staging register is always equal to the
-+        // output register.
-         self.transfer_attenuators(&mut channels)?;
- 
-         // The attenuation code is stored in the upper 6 bits of the register, where each LSB
-@@ -66,6 +65,9 @@ pub trait AttenuatorInterface {
-         // care) would contain erroneous data.
-         let attenuation_code = (!channels[channel as usize]) >> 2;
- 
-+        // The write-back transfer is performed. Staging register is now restored.
-+        self.transfer_attenuators(&mut channels)?;
-+
-         // Convert the desired channel code into dB of attenuation.
-         Ok(attenuation_code as f32 / 2.0)
-     }
-diff --git a/src/hardware/pounder/dds_output.rs b/src/hardware/pounder/dds_output.rs
-index 3ae1ce90..cd978b01 100644
---- a/src/hardware/pounder/dds_output.rs
-+++ b/src/hardware/pounder/dds_output.rs
-@@ -55,7 +55,7 @@
- use log::warn;
- use stm32h7xx_hal as hal;
- 
--use super::{hrtimer::HighResTimerE, QspiInterface};
-+use super::{hrtimer::HighResTimerE, Profile, QspiInterface};
- use ad9959::{Channel, Mode, ProfileSerializer};
- 
- /// The DDS profile update stream.
-@@ -157,6 +157,46 @@ impl<'a> ProfileBuilder<'a> {
-         self
-     }
- 
-+    /// Update a number of channels with fully defined profile settings.
-+    ///
-+    /// # Args
-+    /// * `channels` - A set of channels to apply the configuration to.
-+    /// * `profile` - The complete DDS profile, which defines the frequency tuning word,
-+    ///   amplitude control register & the phase offset word of the channels.
-+    /// # Note
-+    /// The ACR should be stored in the 3 LSB of the word.
-+    /// If amplitude scaling is to be used, the "Amplitude multiplier enable" bit must be set.
-+    #[inline]
-+    pub fn update_channels_with_profile(
-+        &mut self,
-+        channels: Channel,
-+        profile: Profile,
-+    ) -> &mut Self {
-+        self.serializer.update_channels(
-+            channels,
-+            Some(profile.frequency_tuning_word),
-+            Some(profile.phase_offset),
-+            Some(profile.amplitude_control),
-+        );
-+        self
-+    }
-+
-+    /// Update the system clock configuration.
-+    ///
-+    /// # Args
-+    /// * `reference_clock_frequency` - The reference clock frequency provided to the AD9959 core.
-+    /// * `multiplier` - The frequency multiplier of the system clock. Must be 1 or 4-20.
-+    #[inline]
-+    pub fn set_system_clock(
-+        &mut self,
-+        reference_clock_frequency: f32,
-+        multiplier: u8,
-+    ) -> Result<&mut Self, ad9959::Error> {
-+        self.serializer
-+            .set_system_clock(reference_clock_frequency, multiplier)?;
-+        Ok(self)
-+    }
-+
-     /// Write the profile to the DDS asynchronously.
-     #[allow(dead_code)]
-     #[inline]
-diff --git a/src/hardware/pounder/mod.rs b/src/hardware/pounder/mod.rs
-index 5bc7e9ff..5b8d5d30 100644
---- a/src/hardware/pounder/mod.rs
-+++ b/src/hardware/pounder/mod.rs
-@@ -1,10 +1,17 @@
- use self::attenuators::AttenuatorInterface;
- 
- use super::hal;
--use crate::hardware::{shared_adc::AdcChannel, I2c1Proxy};
-+use crate::hardware::{setup, shared_adc::AdcChannel, I2c1Proxy};
-+use crate::net::telemetry::PounderTelemetry;
-+use ad9959::{
-+    amplitude_to_acr, frequency_to_ftw, phase_to_pow, validate_clocking,
-+};
- use embedded_hal::blocking::spi::Transfer;
- use enum_iterator::Sequence;
-+use miniconf::Tree;
-+use rf_power::PowerMeasurementInterface;
- use serde::{Deserialize, Serialize};
-+use stm32h7xx_hal::time::MegaHertz;
- 
- pub mod attenuators;
- pub mod dds_output;
-@@ -120,40 +127,99 @@ impl From<Channel> for GpioPin {
-     }
- }
- 
--#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
--pub struct DdsChannelState {
--    pub phase_offset: f32,
-+#[derive(Serialize, Deserialize, Copy, Clone, Debug, Tree)]
-+pub struct DdsChannelConfig {
-     pub frequency: f32,
-+    pub phase_offset: f32,
-     pub amplitude: f32,
--    pub enabled: bool,
- }
- 
--#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
--pub struct ChannelState {
--    pub parameters: DdsChannelState,
--    pub attenuation: f32,
-+impl Default for DdsChannelConfig {
-+    fn default() -> Self {
-+        Self {
-+            frequency: 0.0,
-+            phase_offset: 0.0,
-+            amplitude: 0.0,
-+        }
-+    }
- }
- 
--#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
--pub struct InputChannelState {
--    pub attenuation: f32,
--    pub power: f32,
--    pub mixer: DdsChannelState,
-+/// Represents a fully defined DDS profile, with parameters expressed in machine units
-+pub struct Profile {
-+    /// A 32-bits representation of DDS frequency in relation to the system clock frequency.
-+    /// This value corresponds to the AD9959 CFTW0 register, which specifies the frequency
-+    /// of DDS channels.
-+    pub frequency_tuning_word: u32,
-+    /// The DDS phase offset. It corresponds to the AD9959 CPOW0 register, which specifies
-+    /// the phase offset of DDS channels.
-+    pub phase_offset: u16,
-+    /// Control amplitudes of DDS channels. It corresponds to the AD9959 ACR register, which
-+    /// controls the amplitude scaling factor of DDS channels.
-+    pub amplitude_control: u32,
-+}
-+
-+impl TryFrom<(ClockConfig, ChannelConfig)> for Profile {
-+    type Error = ad9959::Error;
-+
-+    fn try_from(
-+        (clocking, channel): (ClockConfig, ChannelConfig),
-+    ) -> Result<Self, Self::Error> {
-+        let system_clock_frequency =
-+            clocking.reference_clock * clocking.multiplier as f32;
-+        Ok(Profile {
-+            frequency_tuning_word: frequency_to_ftw(
-+                channel.dds.frequency,
-+                system_clock_frequency,
-+            )?,
-+            phase_offset: phase_to_pow(channel.dds.phase_offset)?,
-+            amplitude_control: amplitude_to_acr(channel.dds.amplitude)?,
-+        })
-+    }
- }
- 
--#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
--pub struct OutputChannelState {
-+#[derive(Serialize, Deserialize, Copy, Clone, Debug, Tree)]
-+pub struct ChannelConfig {
-+    #[tree]
-+    pub dds: DdsChannelConfig,
-     pub attenuation: f32,
--    pub channel: DdsChannelState,
- }
- 
--#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
--pub struct DdsClockConfig {
-+impl Default for ChannelConfig {
-+    fn default() -> Self {
-+        ChannelConfig {
-+            dds: DdsChannelConfig::default(),
-+            attenuation: 31.5,
-+        }
-+    }
-+}
-+
-+#[derive(Serialize, Deserialize, Copy, Clone, Debug, PartialEq, Tree)]
-+pub struct ClockConfig {
-     pub multiplier: u8,
-     pub reference_clock: f32,
-     pub external_clock: bool,
- }
- 
-+impl Default for ClockConfig {
-+    fn default() -> Self {
-+        Self {
-+            multiplier: 5,
-+            reference_clock: MegaHertz::MHz(100).to_Hz() as f32,
-+            external_clock: false,
-+        }
-+    }
-+}
-+
-+#[derive(Copy, Clone, Debug, Default, Deserialize, Serialize, Tree)]
-+pub struct PounderConfig {
-+    #[tree]
-+    pub clock: ClockConfig,
-+    #[tree(depth = 2)]
-+    pub in_channel: [ChannelConfig; 2],
-+    #[tree(depth = 2)]
-+    pub out_channel: [ChannelConfig; 2],
-+}
-+
- impl From<Channel> for ad9959::Channel {
-     /// Translate pounder channels to DDS output channels.
-     fn from(other: Channel) -> Self {
-@@ -585,3 +651,78 @@ impl rf_power::PowerMeasurementInterface for PounderDevices {
-         Ok(adc_scale * 2.048)
-     }
- }
-+
-+impl setup::PounderDevices {
-+    pub fn update_dds(
-+        &mut self,
-+        settings: PounderConfig,
-+        clocking: &mut ClockConfig,
-+    ) {
-+        if *clocking != settings.clock {
-+            match validate_clocking(
-+                settings.clock.reference_clock,
-+                settings.clock.multiplier,
-+            ) {
-+                Ok(_frequency) => {
-+                    self.pounder
-+                        .set_ext_clk(settings.clock.external_clock)
-+                        .unwrap();
-+
-+                    self.dds_output
-+                        .builder()
-+                        .set_system_clock(
-+                            settings.clock.reference_clock,
-+                            settings.clock.multiplier,
-+                        )
-+                        .unwrap()
-+                        .write();
-+
-+                    *clocking = settings.clock;
-+                }
-+                Err(err) => {
-+                    log::error!("Invalid AD9959 clocking parameters: {:?}", err)
-+                }
-+            }
-+        }
-+
-+        for (channel_config, pounder_channel) in settings
-+            .in_channel
-+            .iter()
-+            .chain(settings.out_channel.iter())
-+            .zip([Channel::In0, Channel::In1, Channel::Out0, Channel::Out1])
-+        {
-+            match Profile::try_from((*clocking, *channel_config)) {
-+                Ok(dds_profile) => {
-+                    self.dds_output
-+                        .builder()
-+                        .update_channels_with_profile(
-+                            pounder_channel.into(),
-+                            dds_profile,
-+                        )
-+                        .write();
-+
-+                    if let Err(err) = self.pounder.set_attenuation(
-+                        pounder_channel,
-+                        channel_config.attenuation,
-+                    ) {
-+                        log::error!("Invalid attenuation settings: {:?}", err)
-+                    }
-+                }
-+                Err(err) => {
-+                    log::error!("Invalid AD9959 profile settings: {:?}", err)
-+                }
-+            }
-+        }
-+    }
-+
-+    pub fn get_telemetry(&mut self, config: PounderConfig) -> PounderTelemetry {
-+        PounderTelemetry {
-+            temperature: self.pounder.lm75.read_temperature().unwrap(),
-+            input_power: [
-+                self.pounder.measure_power(Channel::In0).unwrap(),
-+                self.pounder.measure_power(Channel::In1).unwrap(),
-+            ],
-+            config,
-+        }
-+    }
-+}
-diff --git a/src/net/data_stream.rs b/src/net/data_stream.rs
-index 714ec57f..d442f197 100644
---- a/src/net/data_stream.rs
-+++ b/src/net/data_stream.rs
-@@ -25,7 +25,7 @@
- 
- #![allow(non_camel_case_types)] // https://github.com/rust-embedded/heapless/issues/411
- 
--use core::{fmt::Write, mem::MaybeUninit};
-+use core::{fmt::Write, mem::{MaybeUninit, size_of_val}};
- use heapless::{
-     box_pool,
-     pool::boxed::{Box, BoxBlock},
-diff --git a/src/net/mod.rs b/src/net/mod.rs
-index 43733fa8..a8b90f86 100644
---- a/src/net/mod.rs
-+++ b/src/net/mod.rs
-@@ -32,14 +32,14 @@ pub type NetworkReference =
- 
- pub struct MqttStorage {
-     telemetry: [u8; 2048],
--    settings: [u8; 1024],
-+    settings: [u8; 1536],
- }
- 
- impl Default for MqttStorage {
-     fn default() -> Self {
-         Self {
-             telemetry: [0u8; 2048],
--            settings: [0u8; 1024],
-+            settings: [0u8; 1536],
-         }
-     }
- }
-diff --git a/src/net/telemetry.rs b/src/net/telemetry.rs
-index c8eb536b..116382a3 100644
---- a/src/net/telemetry.rs
-+++ b/src/net/telemetry.rs
-@@ -16,7 +16,7 @@ use minimq::{DeferredPublication, Publication};
- use serde::Serialize;
- 
- use super::NetworkReference;
--use crate::hardware::{adc::AdcCode, afe::Gain, dac::DacCode, SystemTimer};
-+use crate::hardware::{adc::AdcCode, afe::Gain, dac::DacCode, SystemTimer, pounder::PounderConfig};
- 
- /// Default metadata message if formatting errors occur.
- const DEFAULT_METADATA: &str = "{\"message\":\"Truncated: See USB terminal\"}";
-@@ -68,6 +68,26 @@ pub struct Telemetry {
- 
-     /// The CPU temperature in degrees Celsius.
-     pub cpu_temp: f32,
-+
-+    /// Measurements related to Pounder
-+    pub pounder: Option<PounderTelemetry>,
-+}
-+
-+/// The structure that holds the telemetry related to Pounder.
-+///
-+/// # Note
-+/// This structure should be generated on-demand by the buffer when required to minimize conversion
-+/// overhead.
-+#[derive(Copy, Clone, Serialize)]
-+pub struct PounderTelemetry {
-+    /// The Pounder temperature in degrees Celsius
-+    pub temperature: f32,
-+
-+    /// The detected RF power into IN channels
-+    pub input_power: [f32; 2],
-+
-+    /// The configuration of the clock and DDS channels
-+    pub config: PounderConfig,
- }
- 
- impl Default for TelemetryBuffer {
-@@ -87,10 +107,17 @@ impl TelemetryBuffer {
-     /// * `afe0` - The current AFE configuration for channel 0.
-     /// * `afe1` - The current AFE configuration for channel 1.
-     /// * `cpu_temp` - The current CPU temperature.
-+    /// * `pounder` - The current Pounder telemetry.
-     ///
-     /// # Returns
-     /// The finalized telemetry structure that can be serialized and reported.
--    pub fn finalize(self, afe0: Gain, afe1: Gain, cpu_temp: f32) -> Telemetry {
-+    pub fn finalize(
-+        self,
-+        afe0: Gain,
-+        afe1: Gain,
-+        cpu_temp: f32,
-+        pounder: Option<PounderTelemetry>,
-+    ) -> Telemetry {
-         let in0_volts = Into::<f32>::into(self.adcs[0]) / afe0.as_multiplier();
-         let in1_volts = Into::<f32>::into(self.adcs[1]) / afe1.as_multiplier();
- 
-@@ -99,6 +126,7 @@ impl TelemetryBuffer {
-             adcs: [in0_volts, in1_volts],
-             dacs: [self.dacs[0].into(), self.dacs[1].into()],
-             digital_inputs: self.digital_inputs,
-+            pounder,
-         }
-     }
- }

mcu.nix

@@ -1,7 +1,7 @@
 { pkgs ? import <nixpkgs> {} }:
 
 let
-  jobs = import ./mcu-contrib/default.nix {
+  jobs = import ./mcu/default.nix {
     mozillaOverlay = import <mozillaOverlay>;
   };
 in

mcu/default.nix

@@ -0,0 +1,105 @@
+{ # Use master branch of the overlay by default
+  mozillaOverlay ? import (builtins.fetchTarball https://github.com/mozilla/nixpkgs-mozilla/archive/master.tar.gz),
+  rustManifest ? ./channel-rust-nightly.toml
+}:
+
+let
+  pkgs = import <nixpkgs> { overlays = [ mozillaOverlay ]; };
+  rustPlatform = pkgs.recurseIntoAttrs (pkgs.callPackage ./rustPlatform.nix {
+    inherit rustManifest;
+  });
+  buildStm32Firmware = { name, src, patchPhase ? "", extraNativeBuildInputs ? [], checkPhase ? "", ... } @ args:
+    let
+      # If binaryName is specified as an arg of buildStm32Firmware,
+      # then the .nix containing the cargoSha256 must be named "cargosha256-${binaryName}.nix";
+      # otherwise, the .nix must be named "cargosha256.nix".
+      cargoSha256Drv = pkgs.runCommand "${name}-cargosha256" { } ''
+        cp "${src}/cargosha256${
+          if (args ? binaryName) then "-" + args.binaryName else ""
+        }.nix" $out
+        '';
+      # If binaryName is specified as an arg of buildStm32Firmware,
+      # then use it as the filename of the ELF generated from `cargo build`;
+      # otherwise, use the `name` arg (i.e. the Rust package name) as the ELF filename.
+      binaryName = if (args ? binaryName) then args.binaryName else name;
+    in
+      rustPlatform.buildRustPackage rec {
+        inherit name;
+        version = "0.0.0";
+
+        inherit src;
+        cargoSha256 = (import cargoSha256Drv);
+
+        inherit patchPhase;
+        nativeBuildInputs = [ pkgs.llvm ] ++ extraNativeBuildInputs;
+        buildPhase = ''
+          export CARGO_HOME=$(mktemp -d cargo-home.XXX)
+          cargo build --release
+        '';
+
+        inherit checkPhase;
+        installPhase = ''
+          mkdir -p $out $out/nix-support
+          cp target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.elf
+          echo file binary-dist $out/${name}.elf >> $out/nix-support/hydra-build-products
+          llvm-objcopy -O binary target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.bin
+          echo file binary-dist $out/${name}.bin >> $out/nix-support/hydra-build-products
+        '';
+
+        dontFixup = true;
+      };
+  migen = (import ../artiq-fast/pkgs/python-deps.nix { inherit (pkgs) stdenv fetchgit fetchFromGitHub python3Packages; misoc-new = true; }).migen;
+in
+  {
+    stabilizer-dual-iir = buildStm32Firmware {
+      name = "stabilizer-dual-iir";
+      binaryName = "dual-iir";
+      src = <stabilizerSrc>;
+      patchPhase = ''
+        substituteInPlace src/hardware/configuration.rs \
+          --replace "IpAddress::v4(10, 34, 16, 103)" \
+                    "IpAddress::v4(192, 168, 1, 76)" \
+          --replace "Ipv4Address::new(10, 34, 16, 1)" \
+                    "Ipv4Address::new(192, 168, 1, 1)"
+      '';
+    };
+    thermostat = buildStm32Firmware {
+      name = "thermostat";
+      src = <thermostatSrc>;
+      checkPhase = ''
+        cargo test --target=${pkgs.rust.toRustTarget pkgs.stdenv.targetPlatform}
+      '';
+    };
+    humpback-dds = buildStm32Firmware {
+      name = "humpback-dds";
+      src = <humpbackDdsSrc>;
+      extraNativeBuildInputs = [
+        (pkgs.python3.withPackages(ps: [ migen ]))
+        pkgs.yosys
+        pkgs.nextpnr
+        pkgs.icestorm
+      ];
+    };
+    # openMMC build system breaks if host compiler is not available, so do not use stdenvNoCC here
+    sayma-mmc = pkgs.stdenv.mkDerivation {
+      name = "sayma-mmc";
+      src = <saymaMmcSrc>;
+      phases = [ "unpackPhase" "buildPhase" "installPhase" ];
+      nativeBuildInputs = [ pkgs.cmake pkgs.gcc-arm-embedded ];
+      buildPhase =
+        ''
+        mkdir build
+        cd build
+        cmake .. -DBOARD=sayma -DBOARD_RTM=sayma -DVERSION= -DTARGET_CONTROLLER=LPC1776 -DCMAKE_BUILD_TYPE=Debug
+        make
+        '';
+      installPhase =
+        ''
+        mkdir $out
+        cp out/* $out
+        mkdir -p $out $out/nix-support
+        echo file binary-dist $out/openMMC.axf >> $out/nix-support/hydra-build-products
+        echo file binary-dist $out/openMMC.bin >> $out/nix-support/hydra-build-products
+        '';
+    };
+  }

mcu/rustPlatform.nix

@@ -0,0 +1,23 @@
+{ recurseIntoAttrs, stdenv, lib,
+  makeRustPlatform,
+  fetchurl, patchelf,
+  rustManifest ? ./channel-rust-nightly.toml
+}:
+
+let
+  targets = [
+    "thumbv7em-none-eabihf"
+  ];
+  rustChannel =
+    lib.rustLib.fromManifestFile rustManifest {
+      inherit stdenv fetchurl patchelf;
+    };
+  rust =
+    rustChannel.rust.override {
+      inherit targets;
+    };
+in
+makeRustPlatform {
+  rustc = rust;
+  cargo = rust;
+}

web.nix

@@ -1,36 +1,7 @@
 let
    pkgs = import <nixpkgs> {};
-   web-src = <webSrc>;
+   src = <webSrc>;
-   nmigen-src = <nmigenSrc>;
 in
-  rec {
+  {
-    web = pkgs.runCommand "web" {} "cd ${web-src}; ${pkgs.zola}/bin/zola build -o $out";
+    web = pkgs.runCommand "web" {} "cd ${src}; ${pkgs.zola}/bin/zola build -o $out";
-    web-intl = pkgs.runCommand "web-intl" {}
-      ''
-      cd ${web-src}
-      export DOMAINNAME=m-labs-intl.com
-      ${pkgs.zola}/bin/zola build -o $out -u https://$DOMAINNAME
-      '';
-    sphinxcontrib-platformpicker = pkgs.python3Packages.buildPythonPackage rec {
-      pname = "sphinxcontrib-platformpicker";
-      version = "1.3";
-      src = pkgs.fetchFromGitHub {
-        owner = "whitequark";
-        repo = "sphinxcontrib-platformpicker";
-        rev = "v${version}";
-        sha256 = "sha256-qKhi4QqYhU7CbNSpziFacXc/sWWPSuM3Nc/oWPmBivM=";
-       };
-      propagatedBuildInputs = [ pkgs.python3Packages.sphinx ];
-    };
-    nmigen-docs = pkgs.stdenvNoCC.mkDerivation {
-      name = "nmigen-docs";
-      src = nmigen-src;
-      buildInputs = [ (pkgs.python3.withPackages(ps: [ ps.sphinx ps.sphinx_rtd_theme sphinxcontrib-platformpicker ])) ];
-      phases = [ "buildPhase" ];
-      buildPhase =
-        ''
-        export PYTHONPATH=$src
-        sphinx-build -b html $src/docs $out
-        '';
-    };
   }

zynq.nix

@@ -0,0 +1,65 @@
+let
+  pkgs = import <nixpkgs> {};
+  zynq-rs-latest = import <zynq-rs>;
+  artiq-zynq = import <artiq-zynq>;
+  artiq-fast = import <artiq-fast> { inherit pkgs; };
+in
+  (
+    builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) zynq-rs-latest
+  ) // (
+    builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) artiq-zynq
+  ) // {
+    gateware-sim = pkgs.lib.hydraJob (pkgs.stdenv.mkDerivation {
+      name = "gateware-sim";
+      buildInputs = [ artiq-fast.migen artiq-fast.migen-axi artiq-fast.artiq ];
+
+      phases = [ "buildPhase" ];
+
+      buildPhase =
+        ''
+        python -m unittest discover ${<artiq-zynq>}/src/gateware -v
+        touch $out
+        '';
+    });
+    zc706-hitl-tests = pkgs.lib.hydraJob (pkgs.stdenv.mkDerivation {
+      name = "zc706-hitl-tests";
+
+      # requires patched Nix
+      __networked = true;
+
+      buildInputs = [
+        pkgs.netcat pkgs.openssh pkgs.rsync artiq-fast.artiq artiq-fast.artiq-netboot
+      ];
+      phases = [ "buildPhase" ];
+
+      buildPhase =
+        ''
+        echo Power cycling board...
+        (echo b; sleep 5; echo B; sleep 5) | nc -N -w6 192.168.1.31 3131
+        echo Power cycle done.
+
+        export USER=hydra
+        export OPENOCD_ZYNQ=${artiq-zynq.zynq-rs}/openocd
+        export SZL=${(import artiq-zynq.zynq-rs).zc706-szl}/szl.elf
+        pushd ${<artiq-zynq>}
+        bash ${<artiq-zynq>}/remote_run.sh -h rpi-4 -o "-F /dev/null -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR -i /opt/hydra_id_rsa" -d ${artiq-zynq.zc706-nist_qc2-jtag}
+        popd
+
+        echo Waiting for the firmware to boot...
+        sleep 15
+
+        echo Running test kernel...
+        artiq_run --device-db ${<artiq-zynq>}/examples/device_db.py ${<artiq-zynq>}/examples/mandelbrot.py
+
+        echo Running ARTIQ unit tests...
+        ARTIQ_ROOT=${<artiq-zynq>}/examples python -m unittest discover artiq.test.coredevice -v
+
+        touch $out
+
+        echo Completed
+
+        (echo b; sleep 5) | nc -N -w6 192.168.1.31 3131
+        echo Board powered off
+        '';
+    });
+  }