kirdy/src/laser_diode/laser_diode.rs

use miniconf::Miniconf;
use stm32f4xx_hal::pac::ADC2;
use crate::laser_diode::ld_ctrl::LdCtrl;
use crate::laser_diode::ld_pwr_exc_protector::{LdPwrExcProtector, self};
use crate::laser_diode::pd_responsitivity;
use core::marker::PhantomData;

use uom::si::{
    electric_current::milliampere,
    f64::{ElectricPotential, ElectricCurrent, Power},
};

use uom::{si::{ISQ, SI, Quantity}, typenum::*};

// Volt / Ampere
pub type TransimpedanceUnit = Quantity<ISQ<P2, P1, N3, N2, Z0, Z0, Z0>, SI<f64>, f64>;
// Ampere / Volt
type TransconductanceUnit = Quantity<ISQ<N2, N1, P3, P2, Z0, Z0, Z0>, SI<f64>, f64>;

impl Settings{
    pub const DAC_OUT_V_MAX: ElectricPotential = ElectricPotential {
        dimension: PhantomData,
        units: PhantomData,
        value: 4.096,
    };

    // Unit: A/V
    const PD_MON_TRANSCONDUCTANCE: TransconductanceUnit = TransconductanceUnit {
        dimension: PhantomData,
        units: PhantomData,
        value: 0.001,
    };

    const LD_DRIVE_TRANSIMPEDANCE: TransimpedanceUnit = TransimpedanceUnit {
        dimension: PhantomData,
        units: PhantomData,
        value: 10.0 / 0.75,
    };
}

#[derive(Clone, Debug, Miniconf)]
pub struct Settings {
    ld_drive_current: ElectricCurrent,
    ld_drive_current_limit: ElectricCurrent,
    #[miniconf(defer)]
    pd_responsitivity: pd_responsitivity::Parameters,
}

impl Default for Settings {
    fn default() -> Self {
        Self {
            ld_drive_current: ElectricCurrent::new::<milliampere>(0.0),
            ld_drive_current_limit: ElectricCurrent::new::<milliampere>(0.0),
            pd_responsitivity: pd_responsitivity::Parameters::default(),
        }
    }
}

pub struct LdDrive{
    ctrl: LdCtrl,
    settings: Settings,
}

impl LdDrive{
    pub fn new(current_source: LdCtrl, pins_adc: ADC2, phy: ld_pwr_exc_protector::LdPwrExcProtectorPhy)-> Self {
        LdPwrExcProtector::setup(pins_adc, phy);

        LdDrive {
            ctrl: current_source,
            settings: Settings::default()
        }
    }

    pub fn setup(&mut self) {
        LdPwrExcProtector::pwr_off();
        self.ld_set_i(ElectricCurrent::new::<milliampere>(0.0));
        self.ld_short();
    }

    pub fn get_ld_drive_current(&mut self) -> ElectricCurrent{
        self.settings.ld_drive_current
    }

    pub fn set_ld_drive_current_limit(&mut self, i_limit: ElectricCurrent){
        self.settings.ld_drive_current_limit = i_limit;
    }

    pub fn ld_short(&mut self) {
        self.ctrl.ld_short_enable();
    }

    pub fn ld_open(&mut self) {
        self.ctrl.ld_short_disable();
    }

    pub fn power_up(&mut self){
        LdPwrExcProtector::pwr_on_and_arm_protection();
    }

    pub fn power_down(&mut self){
        LdPwrExcProtector::pwr_off();
    }

    pub fn get_pd_i(&mut self) -> ElectricCurrent {
        LdPwrExcProtector::get_status().v * Settings::PD_MON_TRANSCONDUCTANCE
    }

    pub fn ld_set_i(&mut self, i: ElectricCurrent) -> ElectricCurrent {
        let ld_i_set = i.min(self.settings.ld_drive_current_limit);
        let ld_i_set = self.ctrl.set_i(ld_i_set, Settings::LD_DRIVE_TRANSIMPEDANCE, Settings::DAC_OUT_V_MAX);
        self.settings.ld_drive_current = ld_i_set;
        ld_i_set
    }

    // Set the calibrated VDDA value obtained from ADC1 calibration
    pub fn set_pd_mon_calibrated_vdda(&mut self, val_cal: u32) {
        LdPwrExcProtector::set_calibrated_vdda(val_cal)
    }

    pub fn pd_mon_status(&mut self) -> ld_pwr_exc_protector::Status {
        LdPwrExcProtector::get_status()
    }

    pub fn pd_mon_clear_alarm(&mut self) {
        LdPwrExcProtector::clear_alarm_status();
    }

    pub fn set_pd_responsitivity(&mut self, responsitivity: pd_responsitivity::ResponsitivityUnit){
        self.settings.pd_responsitivity.responsitivity = responsitivity;
    }

    pub fn set_pd_dark_current(&mut self, i_dark: ElectricCurrent){
        self.settings.pd_responsitivity.i_dark = i_dark;
    }

    pub fn set_ld_power_limit(&mut self, pwr_limit: Power){
        LdPwrExcProtector::set_trigger_threshold_v(self.settings.pd_responsitivity
            .get_ld_i_from_ld_pwr(pwr_limit) / Settings::PD_MON_TRANSCONDUCTANCE
        );
    }

    pub fn set_pd_i_limit(&mut self, i: ElectricCurrent){
        LdPwrExcProtector::set_trigger_threshold_v(i / Settings::PD_MON_TRANSCONDUCTANCE);
    }
}