Update Kirdy Driver Example Code

pykirdy/driver/kirdy_async.py

@@ -129,11 +129,16 @@ class FilterConfig:
         def _filter_type(self):
             return "Sinc3"
 
+    ############## Rewrite
     class Sinc3WithFineODR():
         def __init__(self, rate):
             assert rate >= 1.907465 and rate <= 31250
             self.rate = float(rate)
 
+        # def rate(self, rate):
+        #     assert rate >= 1.907465 and rate <= 31250
+        #     return float(rate)
+
         def _odr_type(self):
             return "sinc3fineodr"
         
@@ -223,7 +228,7 @@ class Device:
                     'ld_i_set': 0.0,            # Laser Diode Output Current (A)
                     'pd_i': 2.0000002e-06,      # Internal Photodiode Monitor current (A)
                     'pd_pwr': None,             # Power Readings from Internal Photodiode (W). Return None if pd_mon parameter(s) are not defined.
-                    'term_50ohm': 'Is50Ohm'    # Is the Low Frequency Modulation Input's Impedance 50 Ohm? (On/Off)
+                    'term_status': 'Is50Ohm'    # Is the Low Frequency Modulation Input's Impedance 50 Ohm? (Is50Ohm/Not50Ohm)
                 }, 
                 'thermostat': {
                     'pwr_on': False,            # Tec Power is On (True/False)

pykirdy/kirdy_qt.py

@@ -332,7 +332,7 @@ class MainWindow(QtWidgets.QMainWindow):
             {'name': 'LD Current Set', 'type': 'float', 'suffix': 'A', 'siPrefix': True, 'readonly': True},
             {'name': 'PD Current', 'type': 'float', 'suffix': 'A', 'siPrefix': True, 'readonly': True},
             {'name': 'PD Power', 'type': 'float', 'suffix': 'W', 'siPrefix': True, 'readonly': True},
-            {'name': 'LF Mod Termination (50 Ohm)', 'type': 'list', 'limits': ['On', 'Off'], 'readonly': True}
+            {'name': 'LF Mod Impedance', 'type': 'list', 'limits': ['Is50Ohm', 'Not50Ohm'], 'readonly': True}
         ]},
         {'name': 'Output Config', 'expanded': True, 'type': 'group', 'children': [
             {'name': 'LD Current Set', 'type': 'float', 'value': 0, 'step': 1, 'decimals': 6, 'limits': (0, 1),
@@ -818,7 +818,7 @@ class MainWindow(QtWidgets.QMainWindow):
                     self.params[1].child('Readings', 'PD Power').setValue(report["pd_pwr"])
                 else:
                     self.params[1].child('Readings', 'PD Power').setValue(0)
-                self.params[1].child('Readings', 'LF Mod Termination (50 Ohm)').setValue(report["term_50ohm"])
+                self.params[1].child('Readings', 'LF Mod Impedance').setValue(report["term_status"])
         except Exception as e:
             logging.error(f"Params tree cannot be updated. Data:{report}", exc_info=True)
 
@@ -898,7 +898,7 @@ class MainWindow(QtWidgets.QMainWindow):
         try:
             if not (self.kirdy.connecting() or self.kirdy.connected()):
                 self.status_lbl.setText("Connecting...")
-                await self.kirdy.start_session(host=host, port=port, timeout=5.0)
+                await self.kirdy.start_session(host=host, port=port, timeout=0.1)
                 await self._on_connection_changed(True)
             else:
                 await self.bail()

src/laser_diode/laser_diode.rs

@@ -10,7 +10,7 @@ use uom::si::{electric_current::{ampere, milliampere},
               power::milliwatt};
 
 use crate::{device::sys_timer::sleep,
-            laser_diode::{ld_ctrl::{Impedance50Ohm, LdCtrl},
+            laser_diode::{ld_ctrl::{Impedance, LdCtrl},
                           ld_current_out_ctrl_timer::LdCurrentOutCtrlTimer,
                           ld_pwr_exc_protector::{self, LdPwrExcProtector},
                           pd_mon_params}};
@@ -66,7 +66,7 @@ pub struct StatusReport {
     ld_i_set: ElectricCurrent,
     pd_i: ElectricCurrent,
     pd_pwr: Power,
-    term_50ohm: Impedance50Ohm,
+    term_status: Impedance,
 }
 
 pub struct LdDrive {
@@ -210,7 +210,7 @@ impl LdDrive {
         self.settings.default_pwr_on = pwr_on;
     }
 
-    pub fn get_term_status(&mut self) -> Impedance50Ohm {
+    pub fn get_term_status(&mut self) -> Impedance {
         self.ctrl.get_lf_mod_in_impedance()
     }
 
@@ -226,7 +226,7 @@ impl LdDrive {
             ld_i_set: ld_i_set,
             pd_i: self.get_pd_i(),
             pd_pwr: self.get_pd_pwr(),
-            term_50ohm: self.get_term_status(),
+            term_status: self.get_term_status(),
         }
     }
 
@@ -255,9 +255,6 @@ impl LdDrive {
         self.settings.pd_mon_params = settings.pd_mon_params;
         self.settings.ld_pwr_limit = settings.ld_pwr_limit;
         self.settings.default_pwr_on = settings.default_pwr_on;
-
-        self.set_ld_power_limit(settings.ld_pwr_limit);
-
         if self.settings.ld_terms_short {
             self.ld_short();
         } else {

src/laser_diode/ld_ctrl.rs

@@ -11,9 +11,9 @@ use uom::si::{electric_current::ampere,
 use crate::laser_diode::max5719::{self, Dac};
 
 #[derive(Deserialize, Serialize, Debug, Clone, Copy)]
-pub enum Impedance50Ohm {
-    On,
-    Off,
+pub enum Impedance {
+    Is50Ohm,
+    Not50Ohm,
 }
 
 pub trait ChannelPins {
@@ -66,11 +66,11 @@ impl LdCtrl {
         self.phy.current_source_short_pin.set_high();
     }
 
-    pub fn get_lf_mod_in_impedance(&mut self) -> Impedance50Ohm {
+    pub fn get_lf_mod_in_impedance(&mut self) -> Impedance {
         if self.phy.termination_status_pin.is_high() {
-            Impedance50Ohm::On
+            Impedance::Is50Ohm
         } else {
-            Impedance50Ohm::Off
+            Impedance::Not50Ohm
         }
     }
 

src/thermostat/max1968.rs

@@ -12,7 +12,7 @@ use stm32f4xx_hal::{adc::{config::{self, AdcConfig},
                     timer::pwm::PwmChannel};
 use uom::si::{electric_potential::millivolt, f32::ElectricPotential, ratio::ratio};
 
-use crate::{device::sys_timer::sleep, thermostat::ad5680};
+use crate::thermostat::ad5680;
 
 pub const PWM_FREQ_KHZ: KilohertzU32 = KilohertzU32::from_raw(20);
 
@@ -77,7 +77,6 @@ pub struct MAX1968 {
     pub phy: MAX1968Phy<Channel0>,
     pub pins_adc: Adc<ADC1>,
     pub dma_adc: DMA_Transfer<Stream2<DMA2>, 1, Adc<ADC2>, PeripheralToMemory, &'static mut [u16; 16]>,
-    pub dac_out_range: ElectricPotential,
     prev_vtec_volt: ElectricPotential,
     prev_itec_volt: ElectricPotential,
 }
@@ -116,7 +115,7 @@ static mut ADC2_FIRST_BUFFER: [u16; 16] = [0; 16];
 static mut ADC2_LOCAL_BUFFER: [u16; 16] = [0; 16];
 
 impl MAX1968 {
-    pub fn new(mut phy_ch0: MAX1968Phy<Channel0>, adc1: ADC1, adc2: ADC2, dma2: DMA2) -> Self {
+    pub fn new(phy_ch0: MAX1968Phy<Channel0>, adc1: ADC1, adc2: ADC2, dma2: DMA2) -> Self {
         let adc_config = AdcConfig::default()
             .clock(config::Clock::Pclk2_div_8)
             .default_sample_time(config::SampleTime::Cycles_480);
@@ -222,27 +221,11 @@ impl MAX1968 {
             );
             NVIC::unmask(interrupt::DMA2_STREAM2);
         }
-        
-        phy_ch0.dac.set(ad5680::MAX_VALUE).unwrap();
-        sleep(500);
-        let mut sample = 0;
-        for _ in 0..512 {
-            sample += pins_adc1.convert(
-                &phy_ch0.dac_feedback_pin,
-                stm32f4xx_hal::adc::config::SampleTime::Cycles_480,
-            ) as u32;
-        }
-        let sample = sample / 512 as u32;
-        let mv = pins_adc1.sample_to_millivolts(sample as u16);
-        let dac_out_range = ElectricPotential::new::<millivolt>(mv as f32);
-        phy_ch0.dac.set(0).unwrap();
-
 
         MAX1968 {
             phy: phy_ch0,
             pins_adc: pins_adc1,
             dma_adc: dma_adc,
-            dac_out_range: dac_out_range,
             prev_vtec_volt: ElectricPotential::new::<millivolt>(0.0),
             prev_itec_volt: ElectricPotential::new::<millivolt>(0.0),
         }

src/thermostat/thermostat.rs

@@ -47,6 +47,11 @@ pub struct TecSettings {
 }
 
 impl TecSettings {
+    pub const DAC_OUT_V_MAX: ElectricPotential = ElectricPotential {
+        dimension: PhantomData,
+        units: PhantomData,
+        value: 3.0,
+    };
     pub const TEC_VSEC_BIAS_V: ElectricPotential = ElectricPotential {
         dimension: PhantomData,
         units: PhantomData,
@@ -232,8 +237,7 @@ impl Thermostat {
 
     pub fn set_i(&mut self, i_tec: ElectricCurrent) -> ElectricCurrent {
         let voltage = i_tec * 10.0 * R_SENSE + self.tec_settings.center_pt;
-        let voltage = self.max1968.set_dac(voltage, self.max1968.dac_out_range);
-
+        let voltage = self.max1968.set_dac(voltage, TecSettings::DAC_OUT_V_MAX);
         self.tec_settings.i_set = (voltage - self.tec_settings.center_pt) / (10.0 * R_SENSE);
         self.tec_settings.i_set
     }
@@ -331,7 +335,7 @@ impl Thermostat {
                     best_error = error;
                     start_value = prev_value;
 
-                    let vref = (value as f32 / ad5680::MAX_VALUE as f32) * self.max1968.dac_out_range;
+                    let vref = (value as f32 / ad5680::MAX_VALUE as f32) * TecSettings::DAC_OUT_V_MAX;
                     self.set_center_pt(vref);
                 }
                 prev_value = value;