linuswck
da50f372d9
gui: plot ld_pwr is zero if responsitivity not set
2024-06-17 13:16:52 +08:00
linuswck
57bfd6d83c
gui: Relocate LD Power limit params in ctrl panel
2024-06-17 13:16:52 +08:00
linuswck
dacf9f0fa5
gui: Add pid autotune to ctrl panel
2024-06-17 13:16:52 +08:00
linuswck
bfd8c0e43a
pid_autotune: Update pid autotune main fn
2024-06-17 13:16:52 +08:00
linuswck
3813b79623
driver: Fix IP Settings not being able to update
2024-06-17 13:16:52 +08:00
linuswck
d5a620c76b
pd_mon: make transconductance user-configurable
...
- hw change: different boards now have different gain settings in order
to set a pd current range close to the ld being used
- transconductance and fin_gain params are added to flash with "Device"
as key
2024-06-17 13:16:48 +08:00
linuswck
f35546b070
gui: lock param tree value when user inputs a new value
...
- prevent user input from getting overwritten from incoming data
2024-06-11 15:03:09 +08:00
linuswck
ded7dd7694
gui: add waitingspinnerwidget
2024-04-23 15:55:14 +08:00
linuswck
ba30575406
GUI: Improve abnormal disconnection handling
2024-04-22 17:05:56 +08:00
linuswck
bfdb1f5066
gui: move tool, save & load flash btns to menu bar
...
- Add a new form to update IP address
2024-04-19 15:56:48 +08:00
linuswck
5b35f32a42
driver: Handle CancelledError for send_cmd handler
2024-04-19 15:56:48 +08:00
linuswck
2df22d5dcb
driver: Use inet_aton to check IPV4 address format
2024-04-19 15:56:48 +08:00
linuswck
b73eacd234
driver: Wait for a sec after hard rst cmd is sent
2024-04-19 15:56:43 +08:00
linuswck
4a06a7579f
gui: handle hard reset in _on_connection_changed()
...
- Ensure correct gui disconnection seq during Kirdy hard reset
2024-04-19 15:56:36 +08:00
linuswck
9524601cb6
gui: Improve DataWatcher operation
...
- Ensure there is only one instance of signal_emitter() task
- calling stop_watching should stop report_task
2024-04-19 13:25:00 +08:00
linuswck
6b250aa1fd
gui: Add global QT Style Sheet
...
- Gray out the objects if they are disabled
2024-04-18 16:45:35 +08:00
linuswck
de80aedafc
gui: separate connection_menu into Qdiag obj
2024-04-11 16:58:48 +08:00
linuswck
31a97bdeb4
gui: GUI Initial Commit
...
- Adapted from Thermostat GUI PR #101
2024-04-11 16:33:35 +08:00
linuswck
784b8a357b
driver: Update send_cmd fn to use msg_type params
2024-04-10 16:57:43 +08:00
linuswck
ae74455f94
driver: Separate setting pd_config into two fns
2024-04-10 16:56:20 +08:00
linuswck
6bccbceb81
main: Add a state to only save network settings
2024-04-10 16:56:20 +08:00
linuswck
eaebdb390d
cmd_handler: change mW to W in SetLdPwrLimit cmd
2024-04-10 16:56:20 +08:00
linuswck
4288d465c9
thermostat: Report temp_setpoint in degree celsius
2024-04-10 16:56:20 +08:00
linuswck
09863353cd
driver: Add lock for tcp writer & reader stream
2024-04-10 16:56:20 +08:00
linuswck
6d107d55cf
driver: Add StoppedConnecting exception
2024-04-10 16:56:20 +08:00
linuswck
898358f4e6
pykirdy: Add reporting interval in report_mode
2024-03-25 15:43:20 +08:00
linuswck
a13c6fa86c
pykirdy: Update handling of json objects received
...
- Accept new line delimited json in read_response()
2024-03-25 15:43:20 +08:00
linuswck
7f06fc06fd
async driver: fix incorrect timeout handling
2024-03-20 15:35:12 +08:00
linuswck
e525a3f354
fix typo
2024-03-20 12:06:05 +08:00
linuswck
048245f674
set_tec_max_i_pos/neg->...cooling_i/heating_i
2024-03-19 14:52:26 +08:00
linuswck
c06491a8b2
Update PID Autotune Code
2024-03-18 15:55:05 +08:00
linuswck
0380c8d30b
Unify naming and unit in firmware and driver
...
- mA, uA -> A
- K -> Degree Celsius
- tec -> thermostat
2024-03-18 15:55:05 +08:00
linuswck
ed5cda6364
Correct wrong comment in driver
2024-03-18 15:54:25 +08:00
linuswck
61624b0bd6
Implement Kirdy AsyncIo Driver and example code
2024-03-15 17:14:22 +08:00
linuswck