laser diode: Add Analog Watchdog initial commit

- rm pid_state for laser diode
This commit is contained in:
linuswck 2024-01-24 11:47:15 +08:00
parent 095fe8ea69
commit c02181c80c
2 changed files with 210 additions and 2 deletions

View File

@ -0,0 +1,208 @@
// stm32f4xx_hal does not provide config and driver for analog watchdog yet
use stm32f4xx_hal::{
pac::{ADC2, NVIC},
gpio::{Analog, Output, PushPull, gpioa::PA3, gpiod::PD9},
interrupt,
};
use uom::si::electric_potential::millivolt;
use uom::si::f64::ElectricPotential;
// 12 bit Resolution
const MAX_SAMPLE: u16 = 4095;
pub type LdPwrEnPinType = PD9<Output<PushPull>>;
pub type PdMonAdcPinType = PA3<Analog>;
static mut ANALOG_WDG: Option<LdAnalogWdg> = None;
pub struct LdAnalogWdgPhy {
// To make sure PA3 is configured to Analog mode
pub _pd_mon_ch0: PdMonAdcPinType,
pub pwr_en_ch0: LdPwrEnPinType,
}
#[derive(Clone)]
pub struct AlarmStatus {
alarm: bool,
val: u16,
}
pub struct LdAnalogWdg {
pac: ADC2,
phy: LdAnalogWdgPhy,
alarm_status: AlarmStatus,
//Calibrated VDDA in millivolt from Adc<ADC1>.calibrate()
calibrated_vdda: u32,
}
impl LdAnalogWdg {
/// ADC interrupt is disabled and continuous conversion is started by default
pub fn setup(pac: ADC2, phy: LdAnalogWdgPhy){
unsafe { ANALOG_WDG = Some(LdAnalogWdg{
pac: pac,
phy: phy,
alarm_status: AlarmStatus {
alarm: false,
val: 0x0000,
},
calibrated_vdda: 3300,
});
}
unsafe {
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.pac.cr1.write(|w| w
// 12 Bit Resolution
.res().twelve_bit()
// Enable Analog Watchdog on Single Regular Channel
.awden().enabled()
.awdsgl().single_channel()
.jawden().disabled()
// Disable Analog Watchdog Interrupt
.awdie().disabled()
// Select Analog Watchdog Channel 3 (PA3) on ADC2
.awdch().bits(0x03)
);
wdg.pac.cr2.write(|w| w
// Continous Conversion mode
.cont().set_bit()
// Enable ADC
.adon().set_bit()
// Start ADC Conversion
.swstart().set_bit()
);
// Set Sampling Time for Channel 3 to 480 Cycle
wdg.pac.smpr2.write(|w| w
.smp3().cycles480()
);
// Set the high threshold to be max value initially
wdg.pac.htr.write(|w| w.bits(0xFFFF_FFFF));
// Set the high threshold to be min value initially
wdg.pac.ltr.write(|w| w.bits(0x0000_0000));
// Set the Conversion Sequence to only have Channel 3 (PA3)
wdg.pac.sqr3.write(|w| w
.sq1().bits(0x03)
);
}
}
}
fn get() -> Option<&'static mut Self> {
unsafe { ANALOG_WDG.as_mut() }
}
/// This fn accepts the calibrated vdda value from Adc<ADC1>.calibrate()
pub fn set_calibrated_vdda(val: u32) {
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.calibrated_vdda = val;
}
}
pub fn get_pd_v() -> ElectricPotential {
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
let sample = wdg.pac.dr.read().data().bits();
return ElectricPotential::new::<millivolt>(((u32::from(sample) * wdg.calibrated_vdda) / u32::from(MAX_SAMPLE)) as f64)
}
ElectricPotential::new::<millivolt>(0.0)
}
fn set_alarm(){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.alarm_status = AlarmStatus {
alarm: true,
val: wdg.pac.dr.read().data().bits(),
};
}
}
pub fn get_alarm_status() -> AlarmStatus {
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
return wdg.alarm_status.clone()
}
AlarmStatus {
alarm: false,
val: 0x0000,
}
}
pub fn clear_alarm_status(){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.alarm_status = AlarmStatus {
alarm: false,
val: 0x0000,
};
}
}
/// Set ADC Watchdog Higher threshold register
/// Interrupt is triggered when ADC value is ABOVE the value set
pub fn set_htr(htr: u32){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.pac.htr.write(|w| unsafe {w.bits(htr)});
}
}
/// Set ADC Watchdog Lower threshold register
/// Interrupt is triggered when ADC value is BELOW the value set
#[allow(unused)]
pub fn set_ltr(ltr:u32){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.pac.ltr.write(|w| unsafe {w.bits(ltr)});
}
}
pub fn enable_watchdog_interrupt(){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.pac.cr1.modify(|_, w| w
.awdie().set_bit()
);
}
}
pub fn disable_watchdog_interrupt(){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.pac.cr1.modify(|_, w| w
.awdie().clear_bit()
);
}
}
fn clear_interrupt_bit(){
unsafe{
NVIC::unmask(interrupt::ADC);
}
}
pub fn is_pwr_engaged() -> bool{
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
return wdg.phy.pwr_en_ch0.is_set_high()
}
false
}
pub fn pwr_engage(){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.phy.pwr_en_ch0.set_high()
}
}
pub fn pwr_disengage(){
if let Some(ref mut wdg ) = LdAnalogWdg::get() {
wdg.phy.pwr_en_ch0.set_low()
}
}
}
#[interrupt]
fn ADC(){
cortex_m::interrupt::free(|_| {
LdAnalogWdg::set_alarm();
LdAnalogWdg::pwr_disengage();
// Disable interrupt to avoid getting stuck in infinite interrupt loop
LdAnalogWdg::disable_watchdog_interrupt();
LdAnalogWdg::clear_interrupt_bit();
}
)
}

View File

@ -1,5 +1,5 @@
pub mod ld_ctrl;
pub mod max5719;
pub mod laser_diode;
pub mod pid_state;
pub mod pd_mon;
pub mod analog_wdg;