main: Add a state to only save network settings

This commit is contained in:
linuswck 2024-04-10 16:24:18 +08:00
parent eaebdb390d
commit 6bccbceb81
3 changed files with 23 additions and 17 deletions

View File

@ -95,8 +95,7 @@ class Device:
async def set_ip_settings(self, addr=[192, 168, 1, 128], port=1337, prefix_len=24, gateway=[192, 168, 1, 1]):
"""
After calling this fn, the user needs to issue the SaveFlashSettings cmd and then issue a
Hard Reset/Power Cycle Kirdy for the new network settings to be effective.
After calling this fn, the ip settings are immediately saved into flash and will be effective on next reboot.
"""
if not(isinstance(addr, list) and isinstance(gateway, list)):
raise InvalidDataType
@ -252,13 +251,13 @@ class Device:
async def save_current_settings_to_flash(self):
"""
Save the current device configurations into flash.
Save the current laser diode and thermostat configurations into flash.
"""
return await self._send_cmd(TARGET_DEVICE, "SaveFlashSettings")
async def load_current_settings_to_flash(self):
"""
Restore stored settings in flash
Restore the laser diode and thermostat settings from flash
"""
return await self._send_cmd(TARGET_DEVICE, "LoadFlashSettings")

View File

@ -42,7 +42,8 @@ pub enum State {
#[default]
LoadFlashSettings,
MainLoop,
SaveFlashSettings,
SaveLdThermostatSettings,
SaveDeviceSettings,
PrepareForHardReset,
HardReset,
}
@ -180,22 +181,12 @@ fn main() -> ! {
})
};
}
State::SaveFlashSettings => {
State::SaveLdThermostatSettings => {
// State Transition
state = State::MainLoop;
wd.feed();
let mut store_value_buf = [0u8; 1024];
match flash_store.write_value(CONFIG_KEY[0], &device_settings, &mut store_value_buf) {
Ok(()) => {
debug!("Device Settings is stored in flash");
}
Err(e) => {
debug!("Cannot Store Flash: {:?}", e);
}
}
wd.feed();
match flash_store.write_value(CONFIG_KEY[1], &laser.get_settings_summary(), &mut store_value_buf) {
Ok(()) => {
debug!("Laser Diode Settings is stored in flash");
@ -215,6 +206,21 @@ fn main() -> ! {
}
}
}
State::SaveDeviceSettings => {
// State Transition
state = State::MainLoop;
wd.feed();
let mut store_value_buf = [0u8; 1024];
match flash_store.write_value(CONFIG_KEY[0], &device_settings, &mut store_value_buf) {
Ok(()) => {
debug!("Device Settings is stored in flash");
}
Err(e) => {
debug!("Cannot Store Flash: {:?}", e);
}
}
}
State::PrepareForHardReset => {
// State Transition
state = State::HardReset;

View File

@ -255,6 +255,7 @@ pub fn execute_cmd(buffer: &mut [u8], buffer_size: usize, socket: &mut SocketHan
Some(val) => {
send_response(buffer, ResponseEnum::Acknowledge, None, socket);
device_settings.ip_settings = val;
*state = State::SaveDeviceSettings;
}
None => {
send_response(buffer, ResponseEnum::InvalidDatatype, Some(ERR_MSG_MISSING_IP_SETTINGS), socket);
@ -289,7 +290,7 @@ pub fn execute_cmd(buffer: &mut [u8], buffer_size: usize, socket: &mut SocketHan
}
Some(DeviceCmd::SaveFlashSettings) => {
send_response(buffer, ResponseEnum::Acknowledge, None, socket);
*state = State::SaveFlashSettings;
*state = State::SaveLdThermostatSettings;
}
Some(DeviceCmd::LoadFlashSettings) => {
send_response(buffer, ResponseEnum::Acknowledge, None, socket);