it-infra/nixbld-etc-nixos/configuration.nix

834 lines
30 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running nixos-help).
{ config, pkgs, ... }:
let
netifWan = "enp4s0";
netifLan = "enp5s0f1";
netifWifi = "wlp6s0";
netifSit = "henet0";
hydraWwwOutputs = "/var/www/hydra-outputs";
in
{
imports =
[
./hardware-configuration.nix
./backup-module.nix
./github-backup-module.nix
./afws-module.nix
./rt.nix
];
boot.loader.grub.enable = true;
boot.loader.grub.copyKernels = true;
boot.loader.grub.device = "nodev";
boot.loader.grub.efiSupport = true;
boot.loader.efi.canTouchEfiVariables = true;
boot.supportedFilesystems = ["zfs"];
boot.kernelParams = ["zfs.l2arc_write_max=536870912"];
services.zfs.autoScrub.enable = true;
services.zfs.autoScrub.interval = "monthly";
services.zfs.autoSnapshot.enable = true;
systemd.suppressedSystemUnits = [
"hibernate.target"
"suspend.target"
"suspend-then-hibernate.target"
"sleep.target"
"hybrid-sleep.target"
"systemd-hibernate.service"
"systemd-hybrid-sleep.service"
"systemd-suspend.service"
"systemd-suspend-then-hibernate.service"
];
security.apparmor.enable = true;
services.fail2ban.enable = true;
services.fail2ban.maxretry = 9;
services.fail2ban.bantime-increment.enable = true;
services.fail2ban.jails.sshd =
''
enabled = true
filter = sshd
action = iptables-allports
'';
networking = {
hostName = "nixbld";
hostId = "e423f012";
firewall = {
allowedTCPPorts = [ 80 443 7402 ];
allowedUDPPorts = [ 53 67 ];
trustedInterfaces = [ netifLan ];
};
interfaces."${netifWan}".useDHCP = true;
interfaces."${netifLan}" = {
ipv4.addresses = [{
address = "192.168.1.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:1::";
prefixLength = 64;
}];
ipv4.routes = [{
address = "192.168.13.0";
prefixLength = 24;
via = "192.168.1.30";
}];
ipv6.routes = [{
address = "2001:470:f821:3::";
prefixLength = 64;
via = "2001:470:f821:1:dea6:32ff:fe95:2fcf";
}];
};
interfaces."${netifWifi}" = {
ipv4.addresses = [{
address = "192.168.12.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:2::";
prefixLength = 64;
}];
};
nat = {
enable = true;
externalInterface = netifWan;
internalInterfaces = [ netifLan netifWifi ];
forwardPorts = [
{ sourcePort = 2201; destination = "192.168.1.201:22"; proto = "tcp"; }
{ sourcePort = 2202; destination = "192.168.1.202:22"; proto = "tcp"; }
{ sourcePort = 2203; destination = "192.168.1.203:22"; proto = "tcp"; }
{ sourcePort = 2204; destination = "192.168.1.204:22"; proto = "tcp"; }
];
extraCommands = ''
iptables -w -N block-lan-from-wifi
iptables -w -A block-lan-from-wifi -i ${netifLan} -o ${netifWifi} -j DROP
iptables -w -A block-lan-from-wifi -i ${netifWifi} -o ${netifLan} -j DROP
iptables -w -A FORWARD -j block-lan-from-wifi
'';
extraStopCommands = ''
iptables -w -D FORWARD -j block-lan-from-wifi 2>/dev/null|| true
iptables -w -F block-lan-from-wifi 2>/dev/null|| true
iptables -w -X block-lan-from-wifi 2>/dev/null|| true
'';
};
sits."${netifSit}" = {
dev = netifWan;
remote = "216.218.221.6";
local = "42.200.147.171";
ttl = 255;
};
interfaces."${netifSit}".ipv6 = {
addresses = [{ address = "2001:470:18:629::2"; prefixLength = 64; }];
routes = [{ address = "::"; prefixLength = 0; }];
};
};
boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = "1";
boot.kernel.sysctl."net.ipv6.conf.default.forwarding" = "1";
boot.kernel.sysctl."net.ipv6.conf.${netifLan}.accept_dad" = "0";
boot.kernel.sysctl."net.ipv6.conf.${netifWifi}.accept_dad" = "0";
services.unbound = {
enable = true;
settings = {
server = {
port = 5353;
};
};
};
services.hostapd = {
enable = true;
interface = netifWifi;
hwMode = "g";
ssid = "M-Labs";
wpaPassphrase = (import /etc/nixos/secret/wifi_password.nix);
extraConfig = ''
ieee80211d=1
country_code=HK
ieee80211n=1
wmm_enabled=1
auth_algs=1
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
'';
};
services.dnsmasq = {
enable = true;
servers = ["::1#5353"];
extraConfig = ''
interface=${netifLan}
interface=${netifWifi}
bind-interfaces
dhcp-range=interface:${netifLan},192.168.1.81,192.168.1.254,24h
dhcp-range=interface:${netifWifi},192.168.12.10,192.168.12.254,24h
enable-ra
dhcp-range=interface:${netifLan},::,constructor:${netifLan},ra-names
dhcp-range=interface:${netifWifi},::,constructor:${netifWifi},ra-only
no-resolv
# Static IPv4s to make Red Pitayas with factory firmware less annoying
dhcp-host=rp-f05cc9,192.168.1.190
dhcp-host=rp-f0612e,192.168.1.191
# Static IPv4s to make port redirections work
dhcp-host=rpi-1,192.168.1.201
dhcp-host=rpi-2,192.168.1.202
dhcp-host=rpi-3,192.168.1.203
dhcp-host=rpi-4,192.168.1.204
# Static IP addresses for non-DHCP boards
address=/rpi-ext/192.168.1.30
address=/rpi-ext/2001:470:f821:1:dea6:32ff:fe95:2fcf
address=/thermostat/192.168.1.26
address=/powercycler/192.168.1.31
address=/kc705/192.168.1.50
address=/zynq-experiments/192.168.1.51
address=/zc706/192.168.1.52
address=/zc706-2/192.168.1.53
address=/cora-z7/192.168.1.54
address=/rust-pitaya/192.168.1.55
address=/sayma/192.168.1.60
address=/metlino/192.168.1.65
address=/kasli/192.168.1.70
address=/kasli-customer/192.168.1.75
address=/stabilizer-customer/192.168.1.76
# uTCA MCH from NAT
address=/tschernobyl/192.168.1.80
'';
};
# Select internationalisation properties.
i18n.defaultLocale = "en_US.UTF-8";
console = {
font = "Lat2-Terminus16";
keyMap = "de";
};
# Set your time zone.
time.timeZone = "Asia/Hong_Kong";
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
wget vim git file lm_sensors acpi pciutils psmisc telnet nixopsUnstable
irssi tmux usbutils imagemagick jq zip unzip
iw
nvme-cli
borgbackup
(callPackage ./afws { inherit pkgs; })
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
# List services that you want to enable:
services.apcupsd.enable = true;
services.apcupsd.configText = ''
UPSTYPE usb
NISIP 127.0.0.1
BATTERYLEVEL 10
MINUTES 5
'';
# Enable the OpenSSH daemon.
services.openssh.enable = true;
services.openssh.forwardX11 = true;
services.openssh.passwordAuthentication = false;
programs.mosh.enable = true;
programs.fish.enable = true;
# Enable CUPS to print documents.
services.avahi.enable = true;
services.avahi.interfaces = [ netifLan ];
services.avahi.publish.enable = true;
services.avahi.publish.userServices = true;
nixpkgs.config.allowUnfree = true;
services.printing.enable = true;
services.printing.drivers = [ pkgs.hplipWithPlugin ];
services.printing.browsing = true;
services.printing.listenAddresses = [ "*:631" ];
services.printing.defaultShared = true;
hardware.sane.enable = true;
hardware.sane.extraBackends = [ pkgs.hplipWithPlugin ];
users.extraUsers.root = {
openssh.authorizedKeys.keys = [
"ecdsa-sha2-nistp384 AAAAE2VjZHNhLXNoYTItbmlzdHAzODQAAAAIbmlzdHAzODQAAABhBNdIiLvP2hmDUFyyE0oLOIXrjrMdWWpBV9/gPR5m4AiARx4JkufIDZzmptdYQ5FhJORJ4lluPqp7dAmahoSwg4lv9Di0iNQpHMJvNGZLHYKM1H1FWCCFIEDJ8bD4SVfrDg=="
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCMALVC8RDTHec+PC8y1s3tcpUAODgq6DEzQdHDf/cyvDMfmCaPiMxfIdmkns5lMa03hymIfSmLUF0jFFDc7biRp7uf9AAXNsrTmplHii0l0McuOOZGlSdZM4eL817P7UwJqFMxJyFXDjkubhQiX6kp25Kfuj/zLnupRCaiDvE7ho/xay6Jrv0XLz935TPDwkc7W1asLIvsZLheB+sRz9SMOb9gtrvk5WXZl5JTOFOLu+JaRwQLHL/xdcHJTOod7tqHYfpoC5JHrEwKzbhTOwxZBQBfTQjQktKENQtBxXHTe71rUEWfEZQGg60/BC4BrRmh4qJjlJu3v4VIhC7SSHn1"
];
shell = pkgs.fish;
};
# https://github.com/NixOS/nixpkgs/issues/155357
security.sudo.enable = true;
users.extraUsers.sb = {
isNormalUser = true;
extraGroups = ["lp" "scanner" "afws"];
openssh.authorizedKeys.keys = [
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCyPk5WyFoWSvF4ozehxcVBoZ+UHgrI7VW/OoQfFFwIQe0qvetUZBMZwR2FwkLPAMZV8zz1v4EfncudEkVghy4P+/YVLlDjqDq9zwZnh8Nd/ifu84wmcNWHT2UcqnhjniCdshL8a44memzABnxfLLv+sXhP2x32cJAamo5y6fukr2qLp2jbXzR+3sv3klE0ruUXis/BR1lLqNJEYP8jB6fLn2sLKinnZPfn6DwVOk10mGeQsdME/eGl3phpjhODH9JW5V2V5nJBbC0rBnq+78dyArKVqjPSmIcSy72DEIpTctnMEN1W34BGrnsDd5Xd/DKxKxHKTMCHtZRwLC2X0NWN"
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCMALVC8RDTHec+PC8y1s3tcpUAODgq6DEzQdHDf/cyvDMfmCaPiMxfIdmkns5lMa03hymIfSmLUF0jFFDc7biRp7uf9AAXNsrTmplHii0l0McuOOZGlSdZM4eL817P7UwJqFMxJyFXDjkubhQiX6kp25Kfuj/zLnupRCaiDvE7ho/xay6Jrv0XLz935TPDwkc7W1asLIvsZLheB+sRz9SMOb9gtrvk5WXZl5JTOFOLu+JaRwQLHL/xdcHJTOod7tqHYfpoC5JHrEwKzbhTOwxZBQBfTQjQktKENQtBxXHTe71rUEWfEZQGg60/BC4BrRmh4qJjlJu3v4VIhC7SSHn1"
];
shell = pkgs.fish;
};
users.extraUsers.rj = {
isNormalUser = true;
extraGroups = ["afws"];
};
users.extraUsers.nkrackow = {
isNormalUser = true;
extraGroups = ["afws"];
openssh.authorizedKeys.keys = [
"ssh-rsa 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"
];
};
users.extraUsers.backupdl = {
isNormalUser = true;
openssh.authorizedKeys.keys = [
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCyPk5WyFoWSvF4ozehxcVBoZ+UHgrI7VW/OoQfFFwIQe0qvetUZBMZwR2FwkLPAMZV8zz1v4EfncudEkVghy4P+/YVLlDjqDq9zwZnh8Nd/ifu84wmcNWHT2UcqnhjniCdshL8a44memzABnxfLLv+sXhP2x32cJAamo5y6fukr2qLp2jbXzR+3sv3klE0ruUXis/BR1lLqNJEYP8jB6fLn2sLKinnZPfn6DwVOk10mGeQsdME/eGl3phpjhODH9JW5V2V5nJBbC0rBnq+78dyArKVqjPSmIcSy72DEIpTctnMEN1W34BGrnsDd5Xd/DKxKxHKTMCHtZRwLC2X0NWN"
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCMALVC8RDTHec+PC8y1s3tcpUAODgq6DEzQdHDf/cyvDMfmCaPiMxfIdmkns5lMa03hymIfSmLUF0jFFDc7biRp7uf9AAXNsrTmplHii0l0McuOOZGlSdZM4eL817P7UwJqFMxJyFXDjkubhQiX6kp25Kfuj/zLnupRCaiDvE7ho/xay6Jrv0XLz935TPDwkc7W1asLIvsZLheB+sRz9SMOb9gtrvk5WXZl5JTOFOLu+JaRwQLHL/xdcHJTOod7tqHYfpoC5JHrEwKzbhTOwxZBQBfTQjQktKENQtBxXHTe71rUEWfEZQGg60/BC4BrRmh4qJjlJu3v4VIhC7SSHn1"
"ssh-rsa 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 backupdl@minipc"
];
};
users.extraUsers.occheung = {
isNormalUser = true;
extraGroups = ["lp" "scanner" "afws"];
openssh.authorizedKeys.keys = [
"ecdsa-sha2-nistp384 AAAAE2VjZHNhLXNoYTItbmlzdHAzODQAAAAIbmlzdHAzODQAAABhBPEvmWmxpFpMgp5fpjKud8ev0cyf/+X5fEpQt/YD/+u4mbvZYPE300DLqQ0h/qjgvaGMz1ndf4idYnRdy+plJEC/+hmlRW5NlcpAr3S/LYAisacgKToFVl+MlBo+emS9Ig=="
];
};
users.extraUsers.spaqin = {
isNormalUser = true;
extraGroups = ["lp" "scanner" "afws"];
openssh.authorizedKeys.keys = [
"ecdsa-sha2-nistp384 AAAAE2VjZHNhLXNoYTItbmlzdHAzODQAAAAIbmlzdHAzODQAAABhBOtmlQmIK/cEUkcwA/y9jC4AohjoEmikerpxzPhZZtOcENidN/vFum58jIcSxBvjHnILOzhfCTeLvbvGbQOFE53a7FOyEHmIzXRKS86Mg5bPHUBJxRSq9MjulGZXES3HOQ=="
];
shell = pkgs.zsh;
};
users.extraUsers.nix = {
isNormalUser = true;
};
boot.kernel.sysctl."kernel.dmesg_restrict" = true;
services.udev.packages = [ pkgs.sane-backends ];
nix.package = pkgs.nix_2_4;
nix.maxJobs = 10;
nix.nrBuildUsers = 64;
nix.trustedUsers = ["sb"];
services.hydra = {
enable = true;
package = pkgs.hydra-unstable;
useSubstitutes = true;
hydraURL = "https://nixbld.m-labs.hk";
notificationSender = "hydra@m-labs.hk";
minimumDiskFree = 15; # in GB
minimumDiskFreeEvaluator = 1;
extraConfig =
''
binary_cache_secret_key_file = /etc/nixos/secret/nixbld.m-labs.hk-1
max_output_size = 10000000000
<runcommand>
job = web:web:web
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/web
</runcommand>
<runcommand>
job = artiq:sipyco:sipyco-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-html
</runcommand>
<runcommand>
job = artiq:sipyco:sipyco-manual-pdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-pdf
</runcommand>
<runcommand>
job = artiq:main-beta:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-beta
</runcommand>
<runcommand>
job = artiq:main-beta:artiq-manual-pdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-pdf-beta
</runcommand>
<runcommand>
job = artiq:extra-beta:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-beta
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf
</runcommand>
<runcommand>
job = artiq:full:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel
</runcommand>
<runcommand>
job = artiq:full-legacy:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-legacy
</runcommand>
<runcommand>
job = artiq:full-legacy:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf-legacy
</runcommand>
<runcommand>
job = artiq:full-legacy:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-legacy
</runcommand>
<runcommand>
job = artiq:*:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-archives/$(jq -r '.build' < $HYDRA_JSON)
</runcommand>
<runcommand>
job = artiq:artiq-nac3:msys2-repos
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/msys2
</runcommand>
<githubstatus>
jobs = artiq:fast.*:extended-tests
inputs = artiqSrc
useShortContext = 1
authorization = token ${(import /etc/nixos/secret/github_tokens.nix).artiq}
</githubstatus>
<gitea_authorization>
sb=${(import /etc/nixos/secret/gitea_tokens.nix).artiq-zynq}
</gitea_authorization>
'';
};
systemd.services.hydra-www-outputs-init = {
description = "Set up a hydra-owned directory for build outputs";
wantedBy = [ "multi-user.target" ];
requiredBy = [ "hydra-queue-runner.service" ];
before = [ "hydra-queue-runner.service" ];
serviceConfig = {
Type = "oneshot";
ExecStart = [
"${pkgs.coreutils}/bin/mkdir -p ${hydraWwwOutputs} ${hydraWwwOutputs}/artiq-conda-channel-archives"
"${pkgs.coreutils}/bin/chown hydra-queue-runner:hydra ${hydraWwwOutputs} ${hydraWwwOutputs}/artiq-conda-channel-archives"
];
};
};
services.afws.enable = true;
nix.extraOptions = ''
secret-key-files = /etc/nixos/secret/nixbld.m-labs.hk-1
'';
nix.sandboxPaths = ["/opt"];
services.munin-node.enable = true;
services.munin-cron = {
enable = true;
hosts = ''
[${config.networking.hostName}]
address localhost
'';
};
services.mlabs-backup.enable = true;
services.ghbackup.enable = true;
services.gitea = {
enable = true;
httpPort = 3001;
rootUrl = "https://git.m-labs.hk/";
appName = "M-Labs Git";
cookieSecure = true;
disableRegistration = true;
mailerPasswordFile = "/etc/nixos/secret/mailerpassword";
settings = {
indexer = {
REPO_INDEXER_ENABLED = true;
};
mailer = {
ENABLED = true;
HOST = "ssl.serverraum.org:587";
FROM = "sysop@m-labs.hk";
USER = "sysop@m-labs.hk";
};
service = {
ENABLE_NOTIFY_MAIL = true;
};
attachment = {
ALLOWED_TYPES = "*/*";
};
};
};
systemd.tmpfiles.rules = [
"L+ '${config.services.gitea.stateDir}/custom/templates/home.tmpl' - - - - ${./gitea-home.tmpl}"
"L+ '${config.services.gitea.stateDir}/custom/templates/user/auth/signin.tmpl' - - - - ${./gitea-signin.tmpl}"
];
services.mattermost = {
enable = true;
siteUrl = "https://chat.m-labs.hk/";
mutableConfig = true;
};
services.postgresql.package = pkgs.postgresql_11;
services.matterbridge = {
enable = true;
configPath = "/etc/nixos/secret/matterbridge.toml";
};
nixpkgs.config.packageOverrides = super: let self = super.pkgs; in {
nix_2_4 = super.nix_2_4.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nix-3-networked-derivations.patch ];
});
nixUnstable = super.nixUnstable.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nix-3-networked-derivations.patch ];
});
hydra-unstable = super.hydra-unstable.overrideAttrs(oa: {
patches = oa.patches or [] ++ [
./hydra-conda.patch
./hydra-msys2.patch
./hydra-restrictdist.patch
./hydra-hack-allowed-uris.patch # work around https://github.com/NixOS/nix/issues/5039
];
hydraPath = oa.hydraPath + ":" + super.lib.makeBinPath [ super.jq ];
});
matterbridge = super.matterbridge.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./matterbridge-disable-github.patch ];
});
gitea = super.gitea.overrideAttrs(oa: {
preBuild = let tagsString = "pam sqlite sqlite_unlock_notify"; in ''
export buildFlagsArray=(
-tags="${tagsString}"
-ldflags='-X "main.Version=${oa.version}" -X "main.Tags=${tagsString}"'
)
'';
});
};
security.acme.acceptTerms = true;
security.acme.email = "sb" + "@m-labs.hk";
security.acme.certs = {
"nixbld.m-labs.hk" = {
group = "nginx";
webroot = "/var/lib/acme/acme-challenge";
extraDomainNames = [
"m-labs.hk"
"www.m-labs.hk"
"conda.m-labs.hk"
"lab.m-labs.hk"
"git.m-labs.hk"
"chat.m-labs.hk"
"hooks.m-labs.hk"
"forum.m-labs.hk"
"perso.m-labs.hk"
"call.m-labs.hk"
"rt.m-labs.hk"
"nmigen.org"
"www.nmigen.org"
"m-labs.science"
"www.m-labs.science"
];
};
};
# https://github.com/NixOS/nixpkgs/issues/106862
systemd.services."acme-fixperms".wants = [ "unbound.service" "dnsmasq.service" ];
systemd.services."acme-fixperms".after = [ "unbound.service" "dnsmasq.service" ];
services.nginx = {
enable = true;
recommendedProxySettings = true;
recommendedGzipSettings = true;
virtualHosts = let
mainWebsite = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "${hydraWwwOutputs}/web";
extraConfig = ''
error_page 404 /404.html;
'';
locations."^~ /fonts/".extraConfig = ''
expires 60d;
'';
locations."^~ /js/".extraConfig = ''
expires 60d;
'';
locations."/MathJax/" = {
alias = "/var/www/MathJax/";
extraConfig = ''
expires 60d;
'';
};
# legacy URLs, redirect to avoid breaking people's bookmarks
locations."/gateware.html".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/migen".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/artiq".extraConfig = ''
return 301 /experiment-control/artiq/;
'';
locations."/artiq/resources.html".extraConfig = ''
return 301 /experiment-control/resources/;
'';
# autogenerated manuals
locations."/artiq/sipyco-manual/" = {
alias = "${hydraWwwOutputs}/sipyco-manual-html/";
};
locations."=/artiq/sipyco-manual.pdf" = {
alias = "${hydraWwwOutputs}/sipyco-manual-pdf/SiPyCo.pdf";
};
locations."/artiq/manual-beta/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-beta/";
};
locations."=/artiq/manual-beta.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-pdf-beta/ARTIQ.pdf";
};
locations."/artiq/manual/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf/share/doc/artiq-manual/ARTIQ.pdf";
};
locations."/artiq/manual-legacy/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-legacy/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual-legacy.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf-legacy/share/doc/artiq-manual/ARTIQ.pdf";
};
# legacy content
locations."/migen/manual/" = {
alias = "/var/www/m-labs.hk.old/migen/manual/";
};
locations."/artiq/manual-release-4/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-4/";
};
locations."/artiq/manual-release-3/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-3/";
};
locations."/artiq/manual-release-2/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-2/";
};
};
in {
"m-labs.hk" = mainWebsite;
"www.m-labs.hk" = mainWebsite;
"m-labs.science" = mainWebsite;
"www.m-labs.science" = mainWebsite;
"lab.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/munin/".alias = "/var/www/munin/";
locations."/munin".extraConfig = ''
auth_basic "Munin";
auth_basic_user_file /etc/nixos/secret/muninpasswd;
'';
locations."/msys2/" = {
alias = "${hydraWwwOutputs}/msys2/";
extraConfig = ''
autoindex on;
'';
};
};
"nixbld.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3000";
};
"conda.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/artiq-beta/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-beta/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
locations."/artiq/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
locations."/artiq-legacy/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-legacy/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
locations."/artiq-archives/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-archives/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
};
"git.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3001";
extraConfig = ''
client_max_body_size 300M;
'';
};
"chat.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyWebsockets = true;
};
"hooks.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/mattermost-github".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi-mgi.sock;
'';
locations."/rfq".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi-rfq.sock;
'';
};
"forum.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/flarum/public";
locations."~ \.php$".extraConfig = ''
fastcgi_pass unix:${config.services.phpfpm.pools.flarum.socket};
fastcgi_index index.php;
'';
extraConfig = ''
index index.php;
include /var/www/flarum/.nginx.conf;
'';
};
"call.m-labs.hk" = {
useACMEHost = "nixbld.m-labs.hk";
enableACME = false;
forceSSL = true;
};
"perso.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/perso";
};
"rt.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/" = {
proxyPass = "http://127.0.0.1:4201";
extraConfig = ''
client_max_body_size 100M;
'';
};
locations."/REST/1.0/NoAuth" = {
proxyPass = "http://127.0.0.1:4201";
extraConfig = ''
client_max_body_size 100M;
allow 127.0.0.1;
deny all;
'';
};
};
"nmigen.org" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
return 307 https://m-labs.hk/gateware/nmigen/;
'';
};
"www.nmigen.org" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
return 307 https://m-labs.hk/gateware/nmigen/;
'';
};
};
};
services.uwsgi = {
enable = true;
plugins = [ "python3" ];
instance = {
type = "emperor";
vassals = {
mattermostgithub = import ./mattermost-github-integration/uwsgi-config.nix { inherit config pkgs; };
rfq = import ./rfq/uwsgi-config.nix { inherit config pkgs; };
};
};
};
services.mysql = {
enable = true;
package = pkgs.mariadb;
};
services.phpfpm.pools.flarum = {
user = "nobody";
settings = {
"listen.owner" = "nginx";
"listen.group" = "nginx";
"listen.mode" = "0600";
"pm" = "dynamic";
"pm.max_children" = 5;
"pm.start_servers" = 2;
"pm.min_spare_servers" = 1;
"pm.max_spare_servers" = 3;
"pm.max_requests" = 500;
};
};
services.jitsi-meet = {
enable = true;
hostName = "call.m-labs.hk";
};
services.jitsi-videobridge.openFirewall = true;
services.rt = {
enable = true;
package = pkgs.rt.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./rt-session.patch ];
});
organization = "M-Labs";
domain = "rt.m-labs.hk";
rtName = "Helpdesk";
ownerEmail = "sb" + "@m-labs.hk";
commentAddress = "helpdesk" + "@m-labs.hk";
correspondAddress = "helpdesk" + "@m-labs.hk";
sendmailPath = "${pkgs.msmtp}/bin/msmtp";
sendmailArguments = ["-t" "-C" "/etc/nixos/secret/rt_msmtp.conf"];
};
systemd.services.rt-fetchmail = {
description = "Fetchmail for RT";
wantedBy = [ "multi-user.target" ];
after = [ "network.target" ];
serviceConfig = {
Restart = "on-failure";
User = "rt";
Group = "rt";
ExecStart = "${pkgs.bash}/bin/bash -c 'PATH=${pkgs.rt}/bin HOME=/tmp ${pkgs.fetchmail}/bin/fetchmail -f /etc/nixos/secret/rt_fetchmailrc'";
};
};
system.stateVersion = "21.05";
}