Remove request rate restriction and remove proxy protocol

Signed-off-by: Egor Savkin <es@m-labs.hk>

m-labs-intl/m-labs-intl.com

@@ -0,0 +1,81 @@
+upstream rfq_server {
+    server 127.0.0.1:5000;
+}
+
+server {
+    limit_conn addr 5;
+
+    root /var/www/m-labs-intl.com/html;
+    index index.html index.htm index.nginx-debian.html;
+
+    server_name m-labs-intl.com;
+
+    location / {
+        try_files $uri $uri/ =404;
+    }
+
+    listen [::]:443 ssl ipv6only=on; # managed by Certbot
+    listen 443 ssl; # managed by Certbot
+    ssl_certificate /etc/letsencrypt/live/m-labs-intl.com/fullchain.pem; # managed by Certbot
+    ssl_certificate_key /etc/letsencrypt/live/m-labs-intl.com/privkey.pem; # managed by Certbot
+    include /etc/letsencrypt/options-ssl-nginx.conf; # managed by Certbot
+    ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot
+}
+
+server {
+    server_name www.m-labs-intl.com;
+    return 301 https://m-labs-intl.com$request_uri;
+
+    listen [::]:443 ssl; # managed by Certbot
+    listen 443 ssl; # managed by Certbot
+    ssl_certificate /etc/letsencrypt/live/m-labs-intl.com/fullchain.pem; # managed by Certbot
+    ssl_certificate_key /etc/letsencrypt/live/m-labs-intl.com/privkey.pem; # managed by Certbot
+    include /etc/letsencrypt/options-ssl-nginx.conf; # managed by Certbot
+    ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot
+}
+
+server {
+    server_name hooks.m-labs-intl.com;
+    limit_conn addr 5;
+
+    location /rfq {
+        proxy_pass http://rfq_server/rfq;
+        proxy_set_header Host $host;
+        proxy_set_header X-Real-IP $remote_addr;
+        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
+        proxy_set_header X-Forwarded-Proto $scheme;
+        proxy_read_timeout 30;
+        proxy_connect_timeout 30;
+        proxy_send_timeout 30;
+    }
+
+    location / {
+        return 418;
+    }
+
+    listen [::]:443 ssl; # managed by Certbot
+    listen 443 ssl; # managed by Certbot
+    ssl_certificate /etc/letsencrypt/live/m-labs-intl.com/fullchain.pem; # managed by Certbot
+    ssl_certificate_key /etc/letsencrypt/live/m-labs-intl.com/privkey.pem; # managed by Certbot
+    include /etc/letsencrypt/options-ssl-nginx.conf; # managed by Certbot
+    ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot
+}
+
+server {
+    limit_conn addr 5;
+    if ($host = m-labs-intl.com) {
+        return 301 https://$host$request_uri;
+    } # managed by Certbot
+
+
+    if ($host = www.m-labs-intl.com) {
+        return 301 https://m-labs-intl.com$request_uri;
+    } # managed by Certbot
+
+
+    listen 80;
+    listen [::]:80;
+
+    server_name m-labs-intl.com www.m-labs-intl.com hooks.m-labs-intl.com;
+    return 301 https://$host$request_uri;
+}

m-labs-intl/main.cf

@@ -0,0 +1,63 @@
+# See /usr/share/postfix/main.cf.dist for a commented, more complete version
+
+
+# Debian specific:  Specifying a file name will cause the first
+# line of that file to be used as the name.  The Debian default
+# is /etc/mailname.
+#myorigin = /etc/mailname
+
+smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
+biff = no
+
+# appending .domain is the MUA's job.
+append_dot_mydomain = no
+
+# Uncomment the next line to generate "delayed mail" warnings
+#delay_warning_time = 4h
+
+readme_directory = no
+
+# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 3.6 on
+# fresh installs.
+compatibility_level = 3.6
+
+
+
+# TLS parameters
+smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
+smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
+smtpd_tls_security_level=may
+
+smtp_tls_CApath=/etc/ssl/certs
+smtp_tls_security_level=may
+smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
+
+
+smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
+myhostname = mail.m-labs-intl.com
+mydomain = m-labs-intl.com
+alias_maps = hash:/etc/aliases
+alias_database = hash:/etc/aliases
+myorigin = $mydomain
+#mydestination = $myhostname, m-labs-intl.com, localhost.localdomain, localhost
+mydestination = 
+relayhost = mail.m-labs.hk
+#relay_domains = $mydomain
+local_transport = error:local delivery disabled
+mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
+mailbox_size_limit = 0
+recipient_delimiter = +
+inet_interfaces = all
+inet_protocols = all
+
+
+	
+virtual_alias_maps = hash:/etc/postfix/virtual
+virtual_alias_domains = $mydomain m-labs.hk
+
+
+# DKIM
+milter_default_action = accept
+milter_protocol = 2
+smtpd_milters = inet:localhost:8891
+non_smtpd_milters = inet:localhost:8891

m-labs-intl/nginx.conf

@@ -0,0 +1,88 @@
+user www-data;
+worker_processes auto;
+pid /run/nginx.pid;
+error_log /var/log/nginx/error.log;
+include /etc/nginx/modules-enabled/*.conf;
+
+events {
+	worker_connections 768;
+	# multi_accept on;
+}
+
+http {
+
+	##
+	# Basic Settings
+	##
+
+	sendfile on;
+	tcp_nopush on;
+	types_hash_max_size 2048;
+	# server_tokens off;
+
+	server_names_hash_bucket_size 64;
+	# server_name_in_redirect off;
+
+	include /etc/nginx/mime.types;
+	default_type application/octet-stream;
+
+	##
+	# SSL Settings
+	##
+
+	ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3; # Dropping SSLv3, ref: POODLE
+	ssl_prefer_server_ciphers on;
+
+	# Rate limiting
+	limit_conn_zone $binary_remote_addr zone=addr:10m;
+
+	##
+	# Logging Settings
+	##
+
+	access_log /var/log/nginx/access.log;
+
+	##
+	# Gzip Settings
+	##
+
+	gzip on;
+
+	# gzip_vary on;
+	# gzip_proxied any;
+	# gzip_comp_level 6;
+	# gzip_buffers 16 8k;
+	# gzip_http_version 1.1;
+	gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript;
+
+	##
+	# Virtual Host Configs
+	##
+
+	include /etc/nginx/conf.d/*.conf;
+	include /etc/nginx/sites-enabled/*;
+}
+
+
+stream {
+    # Upstream mail servers
+    upstream smtp_backend {
+        server mail.m-labs.hk:25;
+    }
+
+    upstream submission_backend {
+        server mail.m-labs.hk:587;
+    }
+
+    # SMTP
+    server {
+        listen 25;
+        proxy_pass smtp_backend;
+    }
+
+    # Submission (Authenticated SMTP)
+    server {
+        listen 587;
+        proxy_pass submission_backend;
+    }
+}

m-labs-intl/opendkim

@@ -0,0 +1,32 @@
+# NOTE: This is a legacy configuration file. It is not used by the opendkim
+# systemd service. Please use the corresponding configuration parameters in
+# /etc/opendkim.conf instead.
+#
+# Previously, one would edit the default settings here, and then execute
+# /lib/opendkim/opendkim.service.generate to generate systemd override files at
+# /etc/systemd/system/opendkim.service.d/override.conf and
+# /etc/tmpfiles.d/opendkim.conf. While this is still possible, it is now
+# recommended to adjust the settings directly in /etc/opendkim.conf.
+#
+#DAEMON_OPTS=""
+# Change to /var/spool/postfix/run/opendkim to use a Unix socket with
+# postfix in a chroot:
+#RUNDIR=/var/spool/postfix/run/opendkim
+RUNDIR=/run/opendkim
+#
+# Uncomment to specify an alternate socket
+# Note that setting this will override any Socket value in opendkim.conf
+# default:
+SOCKET=local:$RUNDIR/opendkim.sock
+# listen on all interfaces on port 54321:
+#SOCKET=inet:54321
+# listen on loopback on port 12345:
+#SOCKET=inet:12345@localhost
+# listen on 192.0.2.1 on port 12345:
+#SOCKET=inet:12345@192.0.2.1
+USER=opendkim
+GROUP=opendkim
+PIDFILE=$RUNDIR/$NAME.pid
+EXTRAAFTER=
+
+SOCKET="inet:8891@localhost"

m-labs-intl/opendkim.conf

@@ -0,0 +1,57 @@
+# This is a basic configuration for signing and verifying. It can easily be
+# adapted to suit a basic installation. See opendkim.conf(5) and
+# /usr/share/doc/opendkim/examples/opendkim.conf.sample for complete
+# documentation of available configuration parameters.
+
+Syslog			yes
+SyslogSuccess		yes
+#LogWhy			no
+
+# Common signing and verification parameters. In Debian, the "From" header is
+# oversigned, because it is often the identity key used by reputation systems
+# and thus somewhat security sensitive.
+Canonicalization	relaxed/simple
+#Mode			sv
+#SubDomains		no
+OversignHeaders		From
+
+# Signing domain, selector, and key (required). For example, perform signing
+# for domain "example.com" with selector "2020" (2020._domainkey.example.com),
+# using the private key stored in /etc/dkimkeys/example.private. More granular
+# setup options can be found in /usr/share/doc/opendkim/README.opendkim.
+#Domain			example.com
+#Selector		2020
+#KeyFile		/etc/dkimkeys/example.private
+
+# In Debian, opendkim runs as user "opendkim". A umask of 007 is required when
+# using a local socket with MTAs that access the socket as a non-privileged
+# user (for example, Postfix). You may need to add user "postfix" to group
+# "opendkim" in that case.
+UserID			opendkim
+UMask			007
+
+# Socket for the MTA connection (required). If the MTA is inside a chroot jail,
+# it must be ensured that the socket is accessible. In Debian, Postfix runs in
+# a chroot in /var/spool/postfix, therefore a Unix socket would have to be
+# configured as shown on the last line below.
+Socket			local:/run/opendkim/opendkim.sock
+#Socket			inet:8891@localhost
+#Socket			inet:8891
+#Socket			local:/var/spool/postfix/opendkim/opendkim.sock
+
+PidFile			/run/opendkim/opendkim.pid
+
+# Hosts for which to sign rather than verify, default is 127.0.0.1. See the
+# OPERATION section of opendkim(8) for more information.
+#InternalHosts		192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
+
+# The trust anchor enables DNSSEC. In Debian, the trust anchor file is provided
+# by the package dns-root-data.
+TrustAnchorFile		/usr/share/dns/root.key
+#Nameservers		127.0.0.1
+
+
+Domain                  m-labs-intl.com
+KeyFile                 /etc/postfix/dkim.key
+Selector                mail
+SOCKET                  inet:8891@localhost

m-labs-intl/rfq.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=RFQ service
+After=network.target
+
+[Service]
+Type=simple
+User=rfqserver
+ExecStart=/home/rfqserver/runrfq.sh
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target

m-labs-intl/runrfq.sh

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+export FLASK_DEBUG=0
+export FLASK_MAIL_SERVER=mail.m-labs.hk
+export FLASK_MAIL_PORT=465
+export FLASK_MAIL_USE_SSL=True
+export FLASK_MAIL_USERNAME=sysop-intl@m-labs-intl.com
+export FLASK_MAIL_PASSWORD_FILE=/home/rfqserver/mail.secret
+export FLASK_MAIL_RECIPIENT=sales@m-labs.hk
+export FLASK_MAIL_SENDER=sysop-intl@m-labs-intl.com
+
+cd /home/rfqserver/web2019/server
+source venv/bin/activate
+python3 -m flask --app rfq run --port=5000

m-labs-intl/setup.md

@@ -0,0 +1,67 @@
+# Setup m-labs-intl.com server
+
+```shell
+apt install git nginx-full python3 python3.12-venv python3-pip
+snap install --classic certbot
+ln -s /snap/bin/certbot /usr/bin/certbot
+useradd -m rfqserver
+useradd -m zolaupd
+
+cp m-labs-intl.com /etc/nginx/sites-available/
+cp nginx.conf /etc/nginx/
+ln -s /etc/nginx/sites-available/m-labs-intl.com /etc/nginx/sites-enabled/
+
+mkdir -p /var/www/m-labs-intl.com/html
+chown -R zolaupd /var/www/m-labs-intl.com/
+
+cp runrfq.sh /home/rfqserver/
+cp mail.secret /home/rfqserver/
+chown rfqserver /home/rfqserver/runrfq.sh
+chmod +x /home/rfqserver/runrfq.sh
+chown rfqserver /home/rfqserver/mail.secret
+
+
+sudo -u zolaupd sh -c '
+  cd /home/zolaupd;
+  mkdir /home/zolaupd/.ssh;
+  echo -n "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIP1OJJM8g/1ffxDjN31XKEfGmrYaW03lwpyTa1UGWqVx
+  ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF6R6XK0IiuAKxVKvSABm4m9bfOlvfJcMvTpjenuXUPv" > /home/zolaupd/.ssh/authorized_keys
+  chmod 700 .ssh/
+  chmod 600 .ssh/authorized_keys
+  '
+
+sudo -u rfqserver sh -c '
+  cd /home/rfqserver;
+  git clone https://git.m-labs.hk/M-Labs/web2019.git;
+  cd web2019;
+  python3 -m venv ./venv;
+  source venv/bin/activate;
+  pip install -r requirements.txt;
+'
+
+cp rfq.service /etc/systemd/system/
+
+systemctl daemon-reload
+systemctl enable rfq.service
+systemctl start rfq.service
+
+service nginx restart
+
+certbot --nginx
+
+service nginx restart
+
+ufw default deny
+ufw allow from 94.190.212.123
+ufw allow from 2001:470:f891:1:5999:5529:5d:f71d
+ufw allow from 202.77.7.238
+ufw allow from 2001:470:18:390::2
+ufw allow "Nginx HTTP"
+ufw allow "Nginx HTTPS"
+ufw limit OpenSSH
+ufw default allow outgoing
+ufw limit 25/tcp
+ufw limit 587/tcp
+ufw show added
+ufw enable
+```

m-labs-intl/virtual

@@ -0,0 +1 @@
+es@m-labs-intl.com es@m-labs.hk