Remove temporary files after uploading website

Signed-off-by: Egor Savkin <es@m-labs.hk>

nixbld-etc-nixos/configuration.nix

@@ -651,6 +651,17 @@ in
         job = web:web:web
         command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/web
       </runcommand>
+      <runcommand>
+        job = web:web:web-intl
+        command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && export TMPSSH=`mktemp -d` && \
+          trap "rm -rf ${TMPSSH@Q}" EXIT && \
+          mkdir $TMPSSH/.ssh && \
+          cp /opt/hydra_id_ed25519 $TMPSSH/.ssh/id_ed25519 && \
+          cp /opt/hydra_id_ed25519.pub $TMPSSH/.ssh/id_ed25519.pub && \
+          echo "5.78.86.156 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEMbV69aqkHdQ1T5lMuALyHjNowU1rottZtEV4OhKQ6Y" > $TMPSSH/.ssh/known_hosts && \
+          chmod 600 $TMPSSH/.ssh/id_ed25519 && \
+          ${pkgs.rsync}/bin/rsync -r -e "${pkgs.openssh}/bin/ssh -i $TMPSSH/.ssh/id_ed25519 -o UserKnownHostsFile=$TMPSSH/.ssh/known_hosts -o IdentitiesOnly=yes" -c $(jq -r '.outputs[0].path' < $HYDRA_JSON)/ zolaupd@5.78.86.156:/var/www/m-labs-intl.com/html/
+      </runcommand>
       <runcommand>
         job = web:web:nmigen-docs
         command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/nmigen-docs
@@ -1158,6 +1169,7 @@ in
     enablePop3 = true;
     enablePop3Ssl = true;
     certificateScheme = "acme-nginx";
+    rejectSender = [ "sapcloudsupport@alerts.ondemand.com" ];
   } // (import /etc/nixos/secret/email_settings.nix);
   services.roundcube = {
     enable = true;

nixops/extra-udev.nix

@@ -23,4 +23,5 @@ SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="4121", MODE="0660"
 SUBSYSTEM=="usb", ATTRS{idVendor}=="1209", ATTRS{idProduct}=="4121", MODE="0660", GROUP="plugdev"
 # DSLogic
 SUBSYSTEM=="usb", ATTRS{idVendor}=="2a0e", ATTRS{idProduct}=="0020", MODE="0660", GROUP="plugdev"
+SUBSYSTEM=="usb", ATTRS{idVendor}=="2a0e", ATTRS{idProduct}=="0034", MODE="0660", GROUP="plugdev"
 ''

nixops/juno-hardware-configuration.nix

@@ -8,9 +8,9 @@
     [ (modulesPath + "/installer/scan/not-detected.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ "xhci_pci" "ehci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" "sr_mod" ];
+  boot.initrd.availableKernelModules = [ "ehci_pci" "ata_piix" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
   boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-intel" ];
   boot.extraModulePackages = [ ];
 
   fileSystems."/" =
@@ -18,12 +18,6 @@
       fsType = "ext4";
     };
 
-  fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/4E51-B390";
-      fsType = "vfat";
-      options = [ "fmask=0022" "dmask=0022" ];
-    };
-
   swapDevices = [ ];
 
   # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
@@ -31,13 +25,13 @@
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp3s0.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp5s0.useDHCP = lib.mkDefault true;
 
   nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
   hardware.cpu.intel.updateMicrocode = true;
 
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
+  boot.loader.grub.enable = true;
+  boot.loader.grub.device = "/dev/sda";
 
   nixpkgs.config.nvidia.acceptLicense = true;
   hardware.nvidia.package = config.boot.kernelPackages.nvidiaPackages.legacy_470;