it-infra/nixbld-etc-nixos/configuration.nix

803 lines
28 KiB
Nix
Raw Normal View History

2020-06-20 17:54:21 +08:00
# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running nixos-help).
{ config, pkgs, ... }:
let
2021-08-07 12:24:00 +08:00
netifWan = "enp4s0";
netifLan = "enp5s0f1";
2021-08-09 13:32:18 +08:00
netifWifi = "wlp6s0";
2020-06-20 17:54:21 +08:00
netifSit = "henet0";
hydraWwwOutputs = "/var/www/hydra-outputs";
in
{
imports =
[
./hardware-configuration.nix
./backup-module.nix
2021-08-07 17:46:09 +08:00
./github-backup-module.nix
2022-02-07 14:31:37 +08:00
./afws-module.nix
2021-08-10 21:28:14 +08:00
./rt.nix
2020-06-20 17:54:21 +08:00
];
2021-08-07 12:24:00 +08:00
boot.loader.grub.enable = true;
boot.loader.grub.copyKernels = true;
boot.loader.grub.device = "nodev";
boot.loader.grub.efiSupport = true;
2020-06-20 17:54:21 +08:00
boot.loader.efi.canTouchEfiVariables = true;
2020-07-26 22:21:31 +08:00
boot.supportedFilesystems = ["zfs"];
2021-08-07 12:24:00 +08:00
boot.kernelParams = ["zfs.l2arc_write_max=536870912"];
2020-07-26 22:21:31 +08:00
services.zfs.autoScrub.enable = true;
2021-05-28 16:07:09 +08:00
services.zfs.autoScrub.interval = "monthly";
2020-07-26 22:29:33 +08:00
services.zfs.autoSnapshot.enable = true;
2021-08-07 12:24:00 +08:00
systemd.suppressedSystemUnits = [
"hibernate.target"
"suspend.target"
"suspend-then-hibernate.target"
"sleep.target"
"hybrid-sleep.target"
"systemd-hibernate.service"
"systemd-hybrid-sleep.service"
"systemd-suspend.service"
"systemd-suspend-then-hibernate.service"
];
2020-06-20 17:54:21 +08:00
security.apparmor.enable = true;
2022-01-03 14:34:57 +08:00
services.fail2ban.enable = true;
services.fail2ban.maxretry = 9;
services.fail2ban.bantime-increment.enable = true;
services.fail2ban.jails.sshd =
''
enabled = true
filter = sshd
action = iptables-allports
'';
2020-06-20 17:54:21 +08:00
networking = {
hostName = "nixbld";
2021-08-07 12:24:00 +08:00
hostId = "e423f012";
2020-06-20 17:54:21 +08:00
firewall = {
2022-02-07 14:31:37 +08:00
allowedTCPPorts = [ 80 443 7402 ];
2020-06-20 17:54:21 +08:00
allowedUDPPorts = [ 53 67 ];
trustedInterfaces = [ netifLan ];
};
2021-08-07 12:24:00 +08:00
interfaces."${netifWan}".useDHCP = true;
2020-06-20 17:54:21 +08:00
interfaces."${netifLan}" = {
ipv4.addresses = [{
address = "192.168.1.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:1::";
prefixLength = 64;
}];
2021-03-04 15:54:41 +08:00
ipv4.routes = [{
address = "192.168.13.0";
prefixLength = 24;
2021-03-05 18:42:54 +08:00
via = "192.168.1.30";
2021-03-04 15:54:41 +08:00
}];
ipv6.routes = [{
address = "2001:470:f821:3::";
prefixLength = 64;
via = "2001:470:f821:1:dea6:32ff:fe95:2fcf";
}];
2020-06-20 17:54:21 +08:00
};
interfaces."${netifWifi}" = {
ipv4.addresses = [{
address = "192.168.12.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:2::";
prefixLength = 64;
}];
};
nat = {
enable = true;
externalInterface = netifWan;
internalInterfaces = [ netifLan netifWifi ];
forwardPorts = [
{ sourcePort = 2201; destination = "192.168.1.201:22"; proto = "tcp"; }
{ sourcePort = 2202; destination = "192.168.1.202:22"; proto = "tcp"; }
{ sourcePort = 2203; destination = "192.168.1.203:22"; proto = "tcp"; }
{ sourcePort = 2204; destination = "192.168.1.204:22"; proto = "tcp"; }
];
extraCommands = ''
iptables -w -N block-lan-from-wifi
iptables -w -A block-lan-from-wifi -i ${netifLan} -o ${netifWifi} -j DROP
iptables -w -A block-lan-from-wifi -i ${netifWifi} -o ${netifLan} -j DROP
iptables -w -A FORWARD -j block-lan-from-wifi
'';
extraStopCommands = ''
iptables -w -D FORWARD -j block-lan-from-wifi 2>/dev/null|| true
iptables -w -F block-lan-from-wifi 2>/dev/null|| true
iptables -w -X block-lan-from-wifi 2>/dev/null|| true
'';
};
sits."${netifSit}" = {
dev = netifWan;
remote = "216.218.221.6";
local = "42.200.147.171";
ttl = 255;
};
interfaces."${netifSit}".ipv6 = {
addresses = [{ address = "2001:470:18:629::2"; prefixLength = 64; }];
routes = [{ address = "::"; prefixLength = 0; }];
};
};
boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = "1";
boot.kernel.sysctl."net.ipv6.conf.default.forwarding" = "1";
2021-04-05 00:08:44 +08:00
boot.kernel.sysctl."net.ipv6.conf.${netifLan}.accept_dad" = "0";
boot.kernel.sysctl."net.ipv6.conf.${netifWifi}.accept_dad" = "0";
2020-06-20 17:54:21 +08:00
services.unbound = {
enable = true;
2021-06-07 09:56:05 +08:00
settings = {
server = {
port = 5353;
};
};
2020-06-20 17:54:21 +08:00
};
services.hostapd = {
enable = true;
interface = netifWifi;
hwMode = "g";
ssid = "M-Labs";
wpaPassphrase = (import /etc/nixos/secret/wifi_password.nix);
extraConfig = ''
ieee80211d=1
country_code=HK
ieee80211n=1
wmm_enabled=1
auth_algs=1
wpa_key_mgmt=WPA-PSK
rsn_pairwise=CCMP
'';
};
services.dnsmasq = {
enable = true;
servers = ["::1#5353"];
extraConfig = ''
interface=${netifLan}
interface=${netifWifi}
bind-interfaces
dhcp-range=interface:${netifLan},192.168.1.81,192.168.1.254,24h
dhcp-range=interface:${netifWifi},192.168.12.10,192.168.12.254,24h
enable-ra
dhcp-range=interface:${netifLan},::,constructor:${netifLan},ra-names
dhcp-range=interface:${netifWifi},::,constructor:${netifWifi},ra-only
no-resolv
# Static IPv4s to make Red Pitayas with factory firmware less annoying
2020-06-20 17:54:21 +08:00
dhcp-host=rp-f05cc9,192.168.1.190
dhcp-host=rp-f0612e,192.168.1.191
# Static IPv4s to make port redirections work
dhcp-host=rpi-1,192.168.1.201
dhcp-host=rpi-2,192.168.1.202
dhcp-host=rpi-3,192.168.1.203
dhcp-host=rpi-4,192.168.1.204
2020-06-24 11:06:35 +08:00
# Static IP addresses for non-DHCP boards
2021-03-05 18:42:54 +08:00
address=/rpi-ext/192.168.1.30
address=/rpi-ext/2001:470:f821:1:dea6:32ff:fe95:2fcf
2020-06-20 17:54:21 +08:00
address=/thermostat/192.168.1.26
2020-06-24 11:06:35 +08:00
address=/powercycler/192.168.1.31
2020-06-20 17:54:21 +08:00
address=/kc705/192.168.1.50
2020-06-24 11:06:35 +08:00
address=/zynq-experiments/192.168.1.51
address=/zc706/192.168.1.52
address=/zc706-2/192.168.1.53
address=/cora-z7/192.168.1.54
address=/rust-pitaya/192.168.1.55
2020-06-20 17:54:21 +08:00
address=/sayma/192.168.1.60
address=/metlino/192.168.1.65
address=/kasli/192.168.1.70
address=/kasli-customer/192.168.1.75
address=/stabilizer-customer/192.168.1.76
2021-03-05 18:42:54 +08:00
2020-06-20 17:54:21 +08:00
# uTCA MCH from NAT
address=/tschernobyl/192.168.1.80
'';
};
# Select internationalisation properties.
i18n.defaultLocale = "en_US.UTF-8";
console = {
font = "Lat2-Terminus16";
keyMap = "de";
};
# Set your time zone.
time.timeZone = "Asia/Hong_Kong";
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
2021-11-24 23:57:18 +08:00
wget vim git file lm_sensors acpi pciutils psmisc telnet nixopsUnstable
2020-06-20 17:54:21 +08:00
irssi tmux usbutils imagemagick jq zip unzip
2021-08-09 13:32:37 +08:00
iw
nvme-cli
2021-09-18 16:35:25 +08:00
borgbackup
2022-02-07 14:31:37 +08:00
(callPackage ./afws { inherit pkgs; })
2020-06-20 17:54:21 +08:00
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
# List services that you want to enable:
services.apcupsd.enable = true;
services.apcupsd.configText = ''
UPSTYPE usb
NISIP 127.0.0.1
BATTERYLEVEL 10
MINUTES 5
'';
# Enable the OpenSSH daemon.
services.openssh.enable = true;
services.openssh.forwardX11 = true;
services.openssh.passwordAuthentication = false;
programs.mosh.enable = true;
programs.fish.enable = true;
# Enable CUPS to print documents.
services.avahi.enable = true;
services.avahi.interfaces = [ netifLan ];
services.avahi.publish.enable = true;
services.avahi.publish.userServices = true;
nixpkgs.config.allowUnfree = true;
services.printing.enable = true;
services.printing.drivers = [ pkgs.hplipWithPlugin ];
services.printing.browsing = true;
services.printing.listenAddresses = [ "*:631" ];
services.printing.defaultShared = true;
hardware.sane.enable = true;
hardware.sane.extraBackends = [ pkgs.hplipWithPlugin ];
2022-01-03 13:46:57 +08:00
users.extraUsers.root = {
openssh.authorizedKeys.keys = [
"ecdsa-sha2-nistp384 AAAAE2VjZHNhLXNoYTItbmlzdHAzODQAAAAIbmlzdHAzODQAAABhBNdIiLvP2hmDUFyyE0oLOIXrjrMdWWpBV9/gPR5m4AiARx4JkufIDZzmptdYQ5FhJORJ4lluPqp7dAmahoSwg4lv9Di0iNQpHMJvNGZLHYKM1H1FWCCFIEDJ8bD4SVfrDg=="
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCMALVC8RDTHec+PC8y1s3tcpUAODgq6DEzQdHDf/cyvDMfmCaPiMxfIdmkns5lMa03hymIfSmLUF0jFFDc7biRp7uf9AAXNsrTmplHii0l0McuOOZGlSdZM4eL817P7UwJqFMxJyFXDjkubhQiX6kp25Kfuj/zLnupRCaiDvE7ho/xay6Jrv0XLz935TPDwkc7W1asLIvsZLheB+sRz9SMOb9gtrvk5WXZl5JTOFOLu+JaRwQLHL/xdcHJTOod7tqHYfpoC5JHrEwKzbhTOwxZBQBfTQjQktKENQtBxXHTe71rUEWfEZQGg60/BC4BrRmh4qJjlJu3v4VIhC7SSHn1"
];
shell = pkgs.fish;
};
# https://github.com/NixOS/nixpkgs/issues/155357
security.sudo.enable = true;
2022-01-03 13:46:57 +08:00
2020-06-20 17:54:21 +08:00
users.extraUsers.sb = {
isNormalUser = true;
2022-02-07 14:31:37 +08:00
extraGroups = ["lp" "scanner" "afws"];
2020-06-20 17:54:21 +08:00
openssh.authorizedKeys.keys = [
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCyPk5WyFoWSvF4ozehxcVBoZ+UHgrI7VW/OoQfFFwIQe0qvetUZBMZwR2FwkLPAMZV8zz1v4EfncudEkVghy4P+/YVLlDjqDq9zwZnh8Nd/ifu84wmcNWHT2UcqnhjniCdshL8a44memzABnxfLLv+sXhP2x32cJAamo5y6fukr2qLp2jbXzR+3sv3klE0ruUXis/BR1lLqNJEYP8jB6fLn2sLKinnZPfn6DwVOk10mGeQsdME/eGl3phpjhODH9JW5V2V5nJBbC0rBnq+78dyArKVqjPSmIcSy72DEIpTctnMEN1W34BGrnsDd5Xd/DKxKxHKTMCHtZRwLC2X0NWN"
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCMALVC8RDTHec+PC8y1s3tcpUAODgq6DEzQdHDf/cyvDMfmCaPiMxfIdmkns5lMa03hymIfSmLUF0jFFDc7biRp7uf9AAXNsrTmplHii0l0McuOOZGlSdZM4eL817P7UwJqFMxJyFXDjkubhQiX6kp25Kfuj/zLnupRCaiDvE7ho/xay6Jrv0XLz935TPDwkc7W1asLIvsZLheB+sRz9SMOb9gtrvk5WXZl5JTOFOLu+JaRwQLHL/xdcHJTOod7tqHYfpoC5JHrEwKzbhTOwxZBQBfTQjQktKENQtBxXHTe71rUEWfEZQGg60/BC4BrRmh4qJjlJu3v4VIhC7SSHn1"
];
2020-10-27 14:57:07 +08:00
shell = pkgs.fish;
2020-06-20 17:54:21 +08:00
};
users.extraUsers.rj = {
isNormalUser = true;
2022-02-07 14:31:37 +08:00
extraGroups = ["afws"];
2020-06-20 17:54:21 +08:00
};
users.extraUsers.backupdl = {
isNormalUser = true;
openssh.authorizedKeys.keys = [
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCyPk5WyFoWSvF4ozehxcVBoZ+UHgrI7VW/OoQfFFwIQe0qvetUZBMZwR2FwkLPAMZV8zz1v4EfncudEkVghy4P+/YVLlDjqDq9zwZnh8Nd/ifu84wmcNWHT2UcqnhjniCdshL8a44memzABnxfLLv+sXhP2x32cJAamo5y6fukr2qLp2jbXzR+3sv3klE0ruUXis/BR1lLqNJEYP8jB6fLn2sLKinnZPfn6DwVOk10mGeQsdME/eGl3phpjhODH9JW5V2V5nJBbC0rBnq+78dyArKVqjPSmIcSy72DEIpTctnMEN1W34BGrnsDd5Xd/DKxKxHKTMCHtZRwLC2X0NWN"
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCMALVC8RDTHec+PC8y1s3tcpUAODgq6DEzQdHDf/cyvDMfmCaPiMxfIdmkns5lMa03hymIfSmLUF0jFFDc7biRp7uf9AAXNsrTmplHii0l0McuOOZGlSdZM4eL817P7UwJqFMxJyFXDjkubhQiX6kp25Kfuj/zLnupRCaiDvE7ho/xay6Jrv0XLz935TPDwkc7W1asLIvsZLheB+sRz9SMOb9gtrvk5WXZl5JTOFOLu+JaRwQLHL/xdcHJTOod7tqHYfpoC5JHrEwKzbhTOwxZBQBfTQjQktKENQtBxXHTe71rUEWfEZQGg60/BC4BrRmh4qJjlJu3v4VIhC7SSHn1"
2021-11-22 12:19:00 +08:00
"ssh-rsa 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 backupdl@minipc"
2020-10-27 14:57:07 +08:00
];
2020-06-20 17:54:21 +08:00
};
2021-11-11 12:12:46 +08:00
users.extraUsers.occheung = {
isNormalUser = true;
2022-02-07 14:31:37 +08:00
extraGroups = ["lp" "scanner" "afws"];
2021-11-11 12:12:46 +08:00
openssh.authorizedKeys.keys = [
"ecdsa-sha2-nistp384 AAAAE2VjZHNhLXNoYTItbmlzdHAzODQAAAAIbmlzdHAzODQAAABhBPEvmWmxpFpMgp5fpjKud8ev0cyf/+X5fEpQt/YD/+u4mbvZYPE300DLqQ0h/qjgvaGMz1ndf4idYnRdy+plJEC/+hmlRW5NlcpAr3S/LYAisacgKToFVl+MlBo+emS9Ig=="
];
};
2020-06-20 17:54:21 +08:00
users.extraUsers.nix = {
isNormalUser = true;
};
boot.kernel.sysctl."kernel.dmesg_restrict" = true;
services.udev.packages = [ pkgs.sane-backends ];
2021-12-01 18:11:06 +08:00
nix.package = pkgs.nix_2_4;
nix.maxJobs = 10;
2021-08-07 12:24:00 +08:00
nix.nrBuildUsers = 64;
2021-11-25 10:42:01 +08:00
nix.trustedUsers = ["sb"];
2020-06-20 17:54:21 +08:00
services.hydra = {
enable = true;
package = pkgs.hydra-unstable;
useSubstitutes = true;
hydraURL = "https://nixbld.m-labs.hk";
notificationSender = "hydra@m-labs.hk";
minimumDiskFree = 15; # in GB
minimumDiskFreeEvaluator = 1;
extraConfig =
''
binary_cache_secret_key_file = /etc/nixos/secret/nixbld.m-labs.hk-1
max_output_size = 10000000000
<runcommand>
job = web:web:web
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/web
</runcommand>
<runcommand>
job = artiq:full:sipyco-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-html
</runcommand>
<runcommand>
job = artiq:full:sipyco-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-latexpdf
</runcommand>
<runcommand>
job = artiq:main-beta:artiq-manual-html
2020-06-20 17:54:21 +08:00
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-beta
</runcommand>
<runcommand>
job = artiq:main-beta:artiq-manual-pdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-pdf-beta
2020-06-20 17:54:21 +08:00
</runcommand>
<runcommand>
job = artiq:full-beta:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-beta
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf
</runcommand>
<runcommand>
job = artiq:full:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel
</runcommand>
2021-02-17 16:09:20 +08:00
<runcommand>
job = artiq:full-legacy:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-legacy
</runcommand>
<runcommand>
job = artiq:full-legacy:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf-legacy
</runcommand>
<runcommand>
job = artiq:full-legacy:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-legacy
</runcommand>
2021-08-10 19:08:25 +08:00
<runcommand>
job = artiq:*:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-archives/$(jq -r '.build' < $HYDRA_JSON)
</runcommand>
2021-02-17 16:09:20 +08:00
<githubstatus>
jobs = artiq:fast.*:extended-tests
inputs = artiqSrc
useShortContext = 1
authorization = token ${(import /etc/nixos/secret/github_tokens.nix).artiq}
</githubstatus>
<gitea_authorization>
sb=${(import /etc/nixos/secret/gitea_tokens.nix).artiq-zynq}
</gitea_authorization>
2020-06-20 17:54:21 +08:00
'';
};
systemd.services.hydra-www-outputs-init = {
description = "Set up a hydra-owned directory for build outputs";
wantedBy = [ "multi-user.target" ];
requiredBy = [ "hydra-queue-runner.service" ];
before = [ "hydra-queue-runner.service" ];
serviceConfig = {
Type = "oneshot";
2021-08-10 19:08:25 +08:00
ExecStart = [
"${pkgs.coreutils}/bin/mkdir -p ${hydraWwwOutputs} ${hydraWwwOutputs}/artiq-conda-channel-archives"
"${pkgs.coreutils}/bin/chown hydra-queue-runner:hydra ${hydraWwwOutputs} ${hydraWwwOutputs}/artiq-conda-channel-archives"
];
2020-06-20 17:54:21 +08:00
};
};
2022-02-07 14:31:37 +08:00
services.afws.enable = true;
2020-06-20 17:54:21 +08:00
nix.extraOptions = ''
secret-key-files = /etc/nixos/secret/nixbld.m-labs.hk-1
'';
nix.sandboxPaths = ["/opt"];
services.munin-node.enable = true;
services.munin-cron = {
enable = true;
hosts = ''
[${config.networking.hostName}]
address localhost
'';
};
services.mlabs-backup.enable = true;
2021-08-07 17:46:09 +08:00
services.ghbackup.enable = true;
2020-06-20 17:54:21 +08:00
services.gitea = {
enable = true;
httpPort = 3001;
rootUrl = "https://git.m-labs.hk/";
appName = "M-Labs Git";
cookieSecure = true;
disableRegistration = true;
mailerPasswordFile = "/etc/nixos/secret/mailerpassword";
2020-10-31 17:30:46 +08:00
settings = {
indexer = {
REPO_INDEXER_ENABLED = true;
};
2020-08-31 17:39:28 +08:00
2020-10-31 17:30:46 +08:00
mailer = {
ENABLED = true;
HOST = "ssl.serverraum.org:587";
FROM = "sysop@m-labs.hk";
USER = "sysop@m-labs.hk";
};
2020-06-20 17:54:21 +08:00
2020-10-31 17:30:46 +08:00
service = {
ENABLE_NOTIFY_MAIL = true;
};
2020-06-20 17:54:21 +08:00
2020-10-31 17:30:46 +08:00
attachment = {
ALLOWED_TYPES = "*/*";
};
};
2020-06-20 17:54:21 +08:00
};
systemd.tmpfiles.rules = [
"L+ '${config.services.gitea.stateDir}/custom/templates/home.tmpl' - - - - ${./gitea-home.tmpl}"
"L+ '${config.services.gitea.stateDir}/custom/templates/user/auth/signin.tmpl' - - - - ${./gitea-signin.tmpl}"
2020-06-20 17:54:21 +08:00
];
services.mattermost = {
enable = true;
siteUrl = "https://chat.m-labs.hk/";
mutableConfig = true;
};
2021-06-07 09:56:05 +08:00
services.postgresql.package = pkgs.postgresql_11;
2020-06-20 17:54:21 +08:00
services.matterbridge = {
enable = true;
configPath = "/etc/nixos/secret/matterbridge.toml";
};
nixpkgs.config.packageOverrides = super: let self = super.pkgs; in {
2021-12-01 18:11:06 +08:00
nix_2_4 = super.nix_2_4.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nix-3-networked-derivations.patch ];
});
2021-12-01 18:11:06 +08:00
nixUnstable = super.nixUnstable.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nix-3-networked-derivations.patch ];
});
2020-06-20 17:54:21 +08:00
hydra-unstable = super.hydra-unstable.overrideAttrs(oa: {
patches = oa.patches or [] ++ [
./hydra-conda.patch
./hydra-restrictdist.patch
./hydra-hack-allowed-uris.patch # work around https://github.com/NixOS/nix/issues/5039
];
2020-06-20 17:54:21 +08:00
hydraPath = oa.hydraPath + ":" + super.lib.makeBinPath [ super.jq ];
});
matterbridge = super.matterbridge.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./matterbridge-disable-github.patch ];
});
gitea = super.gitea.overrideAttrs(oa: {
preBuild = let tagsString = "pam sqlite sqlite_unlock_notify"; in ''
export buildFlagsArray=(
-tags="${tagsString}"
-ldflags='-X "main.Version=${oa.version}" -X "main.Tags=${tagsString}"'
)
'';
});
2020-06-20 17:54:21 +08:00
};
security.acme.acceptTerms = true;
security.acme.email = "sb" + "@m-labs.hk";
security.acme.certs = {
"nixbld.m-labs.hk" = {
2020-11-06 14:58:35 +08:00
group = "nginx";
2020-06-20 17:54:21 +08:00
webroot = "/var/lib/acme/acme-challenge";
2020-10-31 17:30:46 +08:00
extraDomainNames = [
"m-labs.hk"
"www.m-labs.hk"
"conda.m-labs.hk"
"lab.m-labs.hk"
"git.m-labs.hk"
"chat.m-labs.hk"
"hooks.m-labs.hk"
"forum.m-labs.hk"
"perso.m-labs.hk"
"call.m-labs.hk"
2021-08-11 12:02:33 +08:00
"rt.m-labs.hk"
2020-10-31 17:30:46 +08:00
"nmigen.org"
"www.nmigen.org"
];
2020-06-20 17:54:21 +08:00
};
};
# https://github.com/NixOS/nixpkgs/issues/106862
systemd.services."acme-fixperms".wants = [ "unbound.service" "dnsmasq.service" ];
systemd.services."acme-fixperms".after = [ "unbound.service" "dnsmasq.service" ];
2020-06-20 17:54:21 +08:00
services.nginx = {
enable = true;
recommendedProxySettings = true;
recommendedGzipSettings = true;
virtualHosts = let
mainWebsite = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "${hydraWwwOutputs}/web";
extraConfig = ''
error_page 404 /404.html;
'';
locations."^~ /fonts/".extraConfig = ''
expires 60d;
'';
locations."^~ /js/".extraConfig = ''
expires 60d;
'';
locations."/MathJax/" = {
alias = "/var/www/MathJax/";
extraConfig = ''
expires 60d;
'';
};
# legacy URLs, redirect to avoid breaking people's bookmarks
locations."/gateware.html".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/migen".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/artiq".extraConfig = ''
return 301 /experiment-control/artiq/;
'';
locations."/artiq/resources.html".extraConfig = ''
return 301 /experiment-control/resources/;
'';
# autogenerated manuals
locations."/artiq/sipyco-manual/" = {
alias = "${hydraWwwOutputs}/sipyco-manual-html/share/doc/sipyco-manual/html/";
};
locations."=/artiq/sipyco-manual.pdf" = {
alias = "${hydraWwwOutputs}/sipyco-manual-latexpdf/share/doc/sipyco-manual/SiPyCo.pdf";
};
locations."/artiq/manual-beta/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-beta/";
2020-06-20 17:54:21 +08:00
};
locations."=/artiq/manual-beta.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-pdf-beta/ARTIQ.pdf";
2020-06-20 17:54:21 +08:00
};
locations."/artiq/manual/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf/share/doc/artiq-manual/ARTIQ.pdf";
};
2021-02-17 16:09:20 +08:00
locations."/artiq/manual-legacy/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-legacy/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual-legacy.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf-legacy/share/doc/artiq-manual/ARTIQ.pdf";
};
2020-06-20 17:54:21 +08:00
# legacy content
locations."/migen/manual/" = {
alias = "/var/www/m-labs.hk.old/migen/manual/";
};
locations."/artiq/manual-release-4/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-4/";
};
locations."/artiq/manual-release-3/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-3/";
};
locations."/artiq/manual-release-2/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-2/";
};
};
in {
"m-labs.hk" = mainWebsite;
"www.m-labs.hk" = mainWebsite;
"lab.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/munin/".alias = "/var/www/munin/";
locations."/munin".extraConfig = ''
auth_basic "Munin";
auth_basic_user_file /etc/nixos/secret/muninpasswd;
'';
};
"nixbld.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3000";
};
"conda.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/artiq-beta/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-beta/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
locations."/artiq/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
2021-02-17 16:09:20 +08:00
locations."/artiq-legacy/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-legacy/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
2021-08-10 19:08:25 +08:00
locations."/artiq-archives/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-archives/";
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
2020-06-20 17:54:21 +08:00
};
"git.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3001";
extraConfig = ''
client_max_body_size 300M;
'';
};
"chat.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyWebsockets = true;
};
"hooks.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/mattermost-github".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi-mgi.sock;
'';
locations."/rfq".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi-rfq.sock;
'';
};
"forum.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/flarum/public";
2020-06-20 17:54:21 +08:00
locations."~ \.php$".extraConfig = ''
fastcgi_pass unix:${config.services.phpfpm.pools.flarum.socket};
fastcgi_index index.php;
'';
extraConfig = ''
index index.php;
include /var/www/flarum/.nginx.conf;
2020-06-20 17:54:21 +08:00
'';
};
2020-08-03 15:19:56 +08:00
"call.m-labs.hk" = {
useACMEHost = "nixbld.m-labs.hk";
2020-10-31 17:30:46 +08:00
enableACME = false;
2020-08-03 15:19:56 +08:00
forceSSL = true;
};
2020-06-20 17:54:21 +08:00
"perso.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/perso";
};
2021-08-10 21:28:14 +08:00
"rt.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
2021-08-11 10:54:12 +08:00
locations."/" = {
proxyPass = "http://127.0.0.1:4201";
extraConfig = ''
client_max_body_size 100M;
'';
};
locations."/REST/1.0/NoAuth" = {
proxyPass = "http://127.0.0.1:4201";
extraConfig = ''
client_max_body_size 100M;
allow 127.0.0.1;
deny all;
'';
};
2021-08-10 21:28:14 +08:00
};
2020-06-20 17:54:21 +08:00
"nmigen.org" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
return 307 https://m-labs.hk/gateware/nmigen/;
'';
};
"www.nmigen.org" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
return 307 https://m-labs.hk/gateware/nmigen/;
'';
};
};
};
services.uwsgi = {
enable = true;
plugins = [ "python3" ];
instance = {
type = "emperor";
vassals = {
mattermostgithub = import ./mattermost-github-integration/uwsgi-config.nix { inherit config pkgs; };
rfq = import ./rfq/uwsgi-config.nix { inherit config pkgs; };
};
};
};
services.mysql = {
enable = true;
package = pkgs.mariadb;
};
services.phpfpm.pools.flarum = {
user = "nobody";
2020-06-20 17:54:21 +08:00
settings = {
"listen.owner" = "nginx";
"listen.group" = "nginx";
"listen.mode" = "0600";
"pm" = "dynamic";
"pm.max_children" = 5;
"pm.start_servers" = 2;
"pm.min_spare_servers" = 1;
"pm.max_spare_servers" = 3;
"pm.max_requests" = 500;
};
};
2020-08-03 15:19:56 +08:00
services.jitsi-meet = {
enable = true;
hostName = "call.m-labs.hk";
};
services.jitsi-videobridge.openFirewall = true;
2020-08-03 15:19:56 +08:00
2021-08-10 21:28:14 +08:00
services.rt = {
enable = true;
2021-08-12 13:39:35 +08:00
package = pkgs.rt.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./rt-session.patch ];
});
2021-08-10 21:28:14 +08:00
organization = "M-Labs";
domain = "rt.m-labs.hk";
rtName = "Helpdesk";
ownerEmail = "sb" + "@m-labs.hk";
commentAddress = "helpdesk" + "@m-labs.hk";
correspondAddress = "helpdesk" + "@m-labs.hk";
2021-08-11 10:54:24 +08:00
sendmailPath = "${pkgs.msmtp}/bin/msmtp";
sendmailArguments = ["-t" "-C" "/etc/nixos/secret/rt_msmtp.conf"];
2021-08-10 21:28:14 +08:00
};
2021-08-11 11:57:05 +08:00
systemd.services.rt-fetchmail = {
description = "Fetchmail for RT";
wantedBy = [ "multi-user.target" ];
after = [ "network.target" ];
serviceConfig = {
Restart = "on-failure";
User = "rt";
Group = "rt";
ExecStart = "${pkgs.bash}/bin/bash -c 'PATH=${pkgs.rt}/bin HOME=/tmp ${pkgs.fetchmail}/bin/fetchmail -f /etc/nixos/secret/rt_fetchmailrc'";
};
};
2021-08-10 21:28:14 +08:00
2021-08-07 13:19:47 +08:00
system.stateVersion = "21.05";
2020-06-20 17:54:21 +08:00
}