reorganize

This commit is contained in:
Sebastien Bourdeauducq 2017-05-09 15:57:54 +08:00
parent 8a49dfc980
commit e4f513d444
5 changed files with 390 additions and 309 deletions

274
firmware/src/board.rs Normal file
View File

@ -0,0 +1,274 @@
use cortex_m;
use tm4c129x;
const LED1: u8 = 0x10; // PF1
const LED2: u8 = 0x40; // PF3
const HV_PWM: u8 = 0x01; // PF0
const FV_PWM: u8 = 0x04; // PF2
const FBV_PWM: u8 = 0x01; // PD5
const FD_ADC: u8 = 0x01; // PE0
const FV_ADC: u8 = 0x02; // PE1
const FBI_ADC: u8 = 0x04; // PE2
const IC_ADC: u8 = 0x08; // PE3
const FBV_ADC: u8 = 0x20; // PD5
const AV_ADC: u8 = 0x40; // PD6
const FV_ERRN: u8 = 0x01; // PL0
const FBV_ERRN: u8 = 0x02; // PL1
const FBI_ERRN: u8 = 0x04; // PL2
const AV_ERRN: u8 = 0x08; // PL3
const AI_ERRN: u8 = 0x10; // PL4
const ERR_LATCHN: u8 = 0x20; // PL5
const ERR_RESN: u8 = 0x01; // PQ0
const PWM_LOAD: u16 = (/*pwmclk*/16_000_000u32 / /*freq*/100_000) as u16;
const UART_DIV_16P6: u32 = /*altclk*/16_000_000 * (1 << /*len(divfrac)*/6) /
(/*clkdiv*/16 * /*baud*/115200);
pub const AV_ADC_GAIN: f32 = 6.792703150912105;
pub fn set_led(nr: u8, state: bool) {
let bit = match nr {
1 => LED1,
2 => LED2,
_ => panic!("unknown LED")
};
cortex_m::interrupt::free(|cs| {
let gpio_k = tm4c129x::GPIO_PORTK.borrow(cs);
if state {
gpio_k.data.modify(|r, w| w.data().bits(r.data().bits() | bit))
} else {
gpio_k.data.modify(|r, w| w.data().bits(r.data().bits() & !bit))
}
});
}
pub fn set_hv_pwm(duty: u16) {
cortex_m::interrupt::free(|cs| {
let pwm0 = tm4c129x::PWM0.borrow(cs);
pwm0._0_cmpa.write(|w| w.compa().bits(duty));
});
}
pub fn set_fv_pwm(duty: u16) {
cortex_m::interrupt::free(|cs| {
let pwm0 = tm4c129x::PWM0.borrow(cs);
pwm0._1_cmpa.write(|w| w.compa().bits(duty));
});
}
pub fn set_fbv_pwm(duty: u16) {
cortex_m::interrupt::free(|cs| {
let pwm0 = tm4c129x::PWM0.borrow(cs);
pwm0._2_cmpa.write(|w| w.compa().bits(duty));
});
}
#[allow(dead_code)]
pub enum EmissionRange {
Low, // 22K
Med, // 22K//(200Ω + compensated diode)
High // 22K//(39Ω + uncompensated diode)
}
pub fn set_emission_range(range: EmissionRange) {
cortex_m::interrupt::free(|cs| {
let gpio_p = tm4c129x::GPIO_PORTP.borrow(cs);
gpio_p.data.modify(|r, w| {
let value = r.data().bits() & 0b100111;
match range {
EmissionRange::Low => w.data().bits(value | 0b000000),
EmissionRange::Med => w.data().bits(value | 0b001000),
EmissionRange::High => w.data().bits(value | 0b010000),
}
});
});
}
fn reset_error() {
cortex_m::interrupt::free(|cs| {
let gpio_l = tm4c129x::GPIO_PORTL.borrow(cs);
let gpio_q = tm4c129x::GPIO_PORTQ.borrow(cs);
gpio_q.data.modify(|r, w| w.data().bits(r.data().bits() & !ERR_RESN));
while gpio_l.data.read().bits() as u8 & ERR_LATCHN == 0 {}
gpio_q.data.modify(|r, w| w.data().bits(r.data().bits() | ERR_RESN));
});
}
pub fn process_errors() {
cortex_m::interrupt::free(|cs| {
let gpio_l = tm4c129x::GPIO_PORTL.borrow(cs);
let errors_n = gpio_l.data.read().bits() as u8;
if errors_n & FV_ERRN == 0 {
hprintln!("Filament overvolt");
}
if errors_n & FBV_ERRN == 0 {
hprintln!("Filament bias overvolt");
}
if errors_n & FBI_ERRN == 0 {
hprintln!("Filament bias overcurrent");
}
if errors_n & AV_ERRN == 0 {
hprintln!("Anode overvolt");
}
if errors_n & AI_ERRN == 0 {
hprintln!("Anode overcurrent");
}
});
}
pub fn init() {
cortex_m::interrupt::free(|cs| {
let sysctl = tm4c129x::SYSCTL.borrow(cs);
// Set up main oscillator
sysctl.moscctl.write(|w| w.noxtal().bit(false));
sysctl.moscctl.modify(|_, w| w.pwrdn().bit(false).oscrng().bit(true));
// Set up PLL with fVCO=320 MHz
sysctl.pllfreq1.write(|w| w.q().bits(0).n().bits(4));
sysctl.pllfreq0.write(|w| w.mint().bits(64).pllpwr().bit(true));
sysctl.rsclkcfg.modify(|_, w| w.pllsrc().mosc().newfreq().bit(true));
while !sysctl.pllstat.read().lock().bit() {}
// Bring up GPIO ports A, D, E, F, G, K, L, P, Q
sysctl.rcgcgpio.modify(|_, w| {
w.r0().bit(true)
.r3().bit(true)
.r4().bit(true)
.r5().bit(true)
.r6().bit(true)
.r9().bit(true)
.r10().bit(true)
.r13().bit(true)
.r14().bit(true)
});
while !sysctl.prgpio.read().r0().bit() {}
while !sysctl.prgpio.read().r3().bit() {}
while !sysctl.prgpio.read().r4().bit() {}
while !sysctl.prgpio.read().r5().bit() {}
while !sysctl.prgpio.read().r6().bit() {}
while !sysctl.prgpio.read().r9().bit() {}
while !sysctl.prgpio.read().r10().bit() {}
while !sysctl.prgpio.read().r13().bit() {}
while !sysctl.prgpio.read().r14().bit() {}
// Set up UART0 at 115200
let gpio_a = tm4c129x::GPIO_PORTA_AHB.borrow(cs);
gpio_a.dir.write(|w| w.dir().bits(0b11));
gpio_a.den.write(|w| w.den().bits(0b11));
gpio_a.afsel.write(|w| w.afsel().bits(0b11));
gpio_a.pctl.write(|w| unsafe { w.pmc0().bits(1).pmc1().bits(1) });
sysctl.rcgcuart.modify(|_, w| w.r0().bit(true));
while !sysctl.pruart.read().r0().bit() {}
let uart_0 = tm4c129x::UART0.borrow(cs);
uart_0.cc.write(|w| w.cs().altclk());
uart_0.ibrd.write(|w| w.divint().bits((UART_DIV_16P6 >> 6) as u16));
uart_0.fbrd.write(|w| w.divfrac().bits(UART_DIV_16P6 as u8));
uart_0.lcrh.write(|w| w.wlen()._8().fen().bit(true));
uart_0.ctl.write(|w| w.rxe().bit(true).txe().bit(true).uarten().bit(true));
// Set up LEDs
let gpio_k = tm4c129x::GPIO_PORTK.borrow(cs);
gpio_k.dir.write(|w| w.dir().bits(LED1|LED2));
gpio_k.den.write(|w| w.den().bits(LED1|LED2));
// Set up gain and emission range control pins
let gpio_p = tm4c129x::GPIO_PORTP.borrow(cs);
gpio_p.dir.write(|w| w.dir().bits(0b111111));
gpio_p.den.write(|w| w.den().bits(0b111111));
// Set up error pins
let gpio_l = tm4c129x::GPIO_PORTL.borrow(cs);
let gpio_q = tm4c129x::GPIO_PORTQ.borrow(cs);
gpio_l.pur.write(|w| w.pue().bits(FV_ERRN|FBV_ERRN|FBI_ERRN|AV_ERRN|AI_ERRN));
gpio_l.den.write(|w| w.den().bits(FV_ERRN|FBV_ERRN|FBI_ERRN|AV_ERRN|AI_ERRN|ERR_LATCHN));
gpio_q.dir.write(|w| w.dir().bits(ERR_RESN));
gpio_q.den.write(|w| w.den().bits(ERR_RESN));
reset_error();
// Set up PWMs
let gpio_f = tm4c129x::GPIO_PORTF_AHB.borrow(cs);
gpio_f.dir.write(|w| w.dir().bits(HV_PWM|FV_PWM));
gpio_f.den.write(|w| w.den().bits(HV_PWM|FV_PWM));
gpio_f.afsel.write(|w| w.afsel().bits(HV_PWM|FV_PWM));
gpio_f.pctl.write(|w| unsafe { w.pmc0().bits(6).pmc2().bits(6) });
let gpio_g = tm4c129x::GPIO_PORTG_AHB.borrow(cs);
gpio_g.dir.write(|w| w.dir().bits(FBV_PWM));
gpio_g.den.write(|w| w.den().bits(FBV_PWM));
gpio_g.afsel.write(|w| w.afsel().bits(FBV_PWM));
gpio_g.pctl.write(|w| unsafe { w.pmc0().bits(6) });
sysctl.rcgcpwm.modify(|_, w| w.r0().bit(true));
while !sysctl.prpwm.read().r0().bit() {}
let pwm0 = tm4c129x::PWM0.borrow(cs);
// HV_PWM
pwm0._0_gena.write(|w| w.actload().zero().actcmpad().one());
pwm0._0_load.write(|w| w.load().bits(PWM_LOAD));
pwm0._0_cmpa.write(|w| w.compa().bits(0));
pwm0._0_ctl.write(|w| w.enable().bit(true));
// FV_PWM
pwm0._1_gena.write(|w| w.actload().zero().actcmpad().one());
pwm0._1_load.write(|w| w.load().bits(PWM_LOAD));
pwm0._1_cmpa.write(|w| w.compa().bits(0));
pwm0._1_ctl.write(|w| w.enable().bit(true));
// FBV_PWM
pwm0._2_gena.write(|w| w.actload().zero().actcmpad().one());
pwm0._2_load.write(|w| w.load().bits(PWM_LOAD));
pwm0._2_cmpa.write(|w| w.compa().bits(0));
pwm0._2_ctl.write(|w| w.enable().bit(true));
// Enable all at once
pwm0.enable.write(|w| {
w.pwm0en().bit(true)
.pwm2en().bit(true)
.pwm4en().bit(true)
});
// Set up ADC
let gpio_d = tm4c129x::GPIO_PORTD_AHB.borrow(cs);
let gpio_e = tm4c129x::GPIO_PORTE_AHB.borrow(cs);
gpio_d.afsel.write(|w| w.afsel().bits(FBV_ADC|AV_ADC));
gpio_d.amsel.write(|w| w.amsel().bits(FBV_ADC|AV_ADC));
gpio_e.afsel.write(|w| w.afsel().bits(FD_ADC|FV_ADC|FBI_ADC|IC_ADC));
gpio_e.amsel.write(|w| w.amsel().bits(FD_ADC|FV_ADC|FBI_ADC|IC_ADC));
sysctl.rcgcadc.modify(|_, w| w.r0().bit(true));
while !sysctl.pradc.read().r0().bit() {}
let adc0 = tm4c129x::ADC0.borrow(cs);
// Due to silicon erratum, this HAS to use PLL. PIOSC is not a suitable source.
// fADC=32 MHz
adc0.cc.write(|w| w.cs().syspll().clkdiv().bits(10));
adc0.im.write(|w| w.mask0().bit(true));
adc0.emux.write(|w| w.em0().always());
adc0.ssmux0.write(|w| {
w.mux0().bits(0) // IC_ADC
.mux1().bits(1) // FBI_ADC
.mux2().bits(2) // FV_ADC
.mux3().bits(3) // FD_ADC
.mux4().bits(5) // AV_ADC
.mux5().bits(6) // FBV_ADC
});
adc0.ssctl0.write(|w| w.ie5().bit(true).end5().bit(true));
adc0.sstsh0.write(|w| {
w.tsh0()._4()
.tsh1()._4()
.tsh2()._4()
.tsh3()._4()
.tsh4()._4()
.tsh5()._4()
});
adc0.sac.write(|w| w.avg()._64x());
adc0.ctl.write(|w| w.vref().bit(true));
adc0.actss.write(|w| w.asen0().bit(true));
});
}

View File

@ -0,0 +1,39 @@
use board;
use pid;
const PID_PARAMETERS: pid::Parameters = pid::Parameters {
kp: 0.004,
ki: 0.002,
kd: 0.0,
output_min: 0.0,
output_max: 30.0,
integral_min: -5000.0,
integral_max: 5000.0
};
pub struct Controller {
pid: pid::Controller
}
impl Controller {
pub const fn new() -> Controller {
Controller {
pid: pid::Controller::new(PID_PARAMETERS)
}
}
pub fn adc_input(&mut self, av_sample: u16) {
let pid_out = self.pid.update(av_sample as f32);
board::set_hv_pwm(pid_out as u16)
}
pub fn set_target(&mut self, volts: f32) {
self.pid.set_target(volts*board::AV_ADC_GAIN)
}
pub fn ready(&mut self) -> bool {
self.pid.is_within(1.0*board::AV_ADC_GAIN)
}
}

View File

@ -0,0 +1,28 @@
use board;
use pid;
const PID_PARAMETERS: pid::Parameters = pid::Parameters {
kp: 0.004,
ki: 0.002,
kd: 0.0,
output_min: 0.0,
output_max: 30.0,
integral_min: -5000.0,
integral_max: 5000.0
};
pub struct Controller {
pid: pid::Controller
}
impl Controller {
pub const fn new() -> Controller {
Controller {
pid: pid::Controller::new(PID_PARAMETERS)
}
}
pub fn adc_input(&mut self, _fbi_sample: u16, _fd_sample: u16, _fv_sample: u16, _fbv_sample: u16) {
}
}

View File

@ -1,4 +1,4 @@
#![feature(used, const_fn)]
#![feature(used, const_fn, core_float)]
#![no_std]
#[macro_use]
@ -14,49 +14,17 @@ use cortex_m::interrupt::Mutex;
use tm4c129x::interrupt::Interrupt;
use tm4c129x::interrupt::Handlers as InterruptHandlers;
mod board;
mod pid;
mod loop_anode;
mod loop_cathode;
const HV_PID_PARAMETERS: pid::Parameters = pid::Parameters {
kp: 0.004,
ki: 0.002,
kd: 0.0,
output_min: 0.0,
output_max: 30.0,
integral_min: -5000.0,
integral_max: 5000.0
};
static LOOP_ANODE: Mutex<RefCell<loop_anode::Controller>> = Mutex::new(RefCell::new(
loop_anode::Controller::new()));
static HV_PID: Mutex<RefCell<pid::Controller>> = Mutex::new(RefCell::new(
pid::Controller::new(HV_PID_PARAMETERS)));
const LED1: u8 = 0x10; // PF1
const LED2: u8 = 0x40; // PF3
const HV_PWM: u8 = 0x01; // PF0
const FV_PWM: u8 = 0x04; // PF2
const FBV_PWM: u8 = 0x01; // PD5
const FD_ADC: u8 = 0x01; // PE0
const FV_ADC: u8 = 0x02; // PE1
const FBI_ADC: u8 = 0x04; // PE2
const IC_ADC: u8 = 0x08; // PE3
const FBV_ADC: u8 = 0x20; // PD5
const AV_ADC: u8 = 0x40; // PD6
const FV_ERRN: u8 = 0x01; // PL0
const FBV_ERRN: u8 = 0x02; // PL1
const FBI_ERRN: u8 = 0x04; // PL2
const AV_ERRN: u8 = 0x08; // PL3
const AI_ERRN: u8 = 0x10; // PL4
const ERR_LATCHN: u8 = 0x20; // PL5
const ERR_RESN: u8 = 0x01; // PQ0
const PWM_LOAD: u16 = (/*pwmclk*/16_000_000u32 / /*freq*/100_000) as u16;
const UART_DIV_16P6: u32 = /*altclk*/16_000_000 * (1 << /*len(divfrac)*/6) /
(/*clkdiv*/16 * /*baud*/115200);
static LOOP_CATHODE: Mutex<RefCell<loop_cathode::Controller>> = Mutex::new(RefCell::new(
loop_cathode::Controller::new()));
pub struct UART0;
@ -89,283 +57,35 @@ macro_rules! println {
}
fn set_led(nr: u8, state: bool) {
cortex_m::interrupt::free(|cs| {
let gpio_k = tm4c129x::GPIO_PORTK.borrow(cs);
if state {
gpio_k.data.modify(|r, w| w.data().bits(r.data().bits() | nr))
} else {
gpio_k.data.modify(|r, w| w.data().bits(r.data().bits() & !nr))
}
});
}
fn set_hv_pwm(duty: u16) {
cortex_m::interrupt::free(|cs| {
let pwm0 = tm4c129x::PWM0.borrow(cs);
pwm0._0_cmpa.write(|w| w.compa().bits(duty));
});
}
fn set_fv_pwm(duty: u16) {
cortex_m::interrupt::free(|cs| {
let pwm0 = tm4c129x::PWM0.borrow(cs);
pwm0._1_cmpa.write(|w| w.compa().bits(duty));
});
}
fn set_fbv_pwm(duty: u16) {
cortex_m::interrupt::free(|cs| {
let pwm0 = tm4c129x::PWM0.borrow(cs);
pwm0._2_cmpa.write(|w| w.compa().bits(duty));
});
}
#[allow(dead_code)]
enum EmissionRange {
Low, // 22K
Med, // 22K//(200Ω + compensated diode)
High // 22K//(39Ω + uncompensated diode)
}
fn set_emission_range(range: EmissionRange) {
cortex_m::interrupt::free(|cs| {
let gpio_p = tm4c129x::GPIO_PORTP.borrow(cs);
gpio_p.data.modify(|r, w| {
let value = r.data().bits() & 0b100111;
match range {
EmissionRange::Low => w.data().bits(value | 0b000000),
EmissionRange::Med => w.data().bits(value | 0b001000),
EmissionRange::High => w.data().bits(value | 0b010000),
}
});
});
}
fn error_reset() {
cortex_m::interrupt::free(|cs| {
let gpio_l = tm4c129x::GPIO_PORTL.borrow(cs);
let gpio_q = tm4c129x::GPIO_PORTQ.borrow(cs);
gpio_q.data.modify(|r, w| w.data().bits(r.data().bits() & !ERR_RESN));
while gpio_l.data.read().bits() as u8 & ERR_LATCHN == 0 {}
gpio_q.data.modify(|r, w| w.data().bits(r.data().bits() | ERR_RESN));
});
}
fn main() {
cortex_m::interrupt::free(|cs| {
let sysctl = tm4c129x::SYSCTL.borrow(cs);
let nvic = tm4c129x::NVIC.borrow(cs);
board::init();
cortex_m::interrupt::free(|cs| {
// Enable FPU
let scb = tm4c129x::SCB.borrow(cs);
scb.enable_fpu();
// Set up main oscillator
sysctl.moscctl.write(|w| w.noxtal().bit(false));
sysctl.moscctl.modify(|_, w| w.pwrdn().bit(false).oscrng().bit(true));
// Set up PLL with fVCO=320 MHz
sysctl.pllfreq1.write(|w| w.q().bits(0).n().bits(4));
sysctl.pllfreq0.write(|w| w.mint().bits(64).pllpwr().bit(true));
sysctl.rsclkcfg.modify(|_, w| w.pllsrc().mosc().newfreq().bit(true));
while !sysctl.pllstat.read().lock().bit() {}
// Set up system timer
let systick = tm4c129x::SYST.borrow(cs);
systick.set_reload(systick.get_ticks_per_10ms());
systick.enable_counter();
systick.enable_interrupt();
// Bring up GPIO ports A, D, E, F, G, K, L, P, Q
sysctl.rcgcgpio.modify(|_, w| {
w.r0().bit(true)
.r3().bit(true)
.r4().bit(true)
.r5().bit(true)
.r6().bit(true)
.r9().bit(true)
.r10().bit(true)
.r13().bit(true)
.r14().bit(true)
});
while !sysctl.prgpio.read().r0().bit() {}
while !sysctl.prgpio.read().r3().bit() {}
while !sysctl.prgpio.read().r4().bit() {}
while !sysctl.prgpio.read().r5().bit() {}
while !sysctl.prgpio.read().r6().bit() {}
while !sysctl.prgpio.read().r9().bit() {}
while !sysctl.prgpio.read().r10().bit() {}
while !sysctl.prgpio.read().r13().bit() {}
while !sysctl.prgpio.read().r14().bit() {}
// Set up UART0 at 115200
let gpio_a = tm4c129x::GPIO_PORTA_AHB.borrow(cs);
gpio_a.dir.write(|w| w.dir().bits(0b11));
gpio_a.den.write(|w| w.den().bits(0b11));
gpio_a.afsel.write(|w| w.afsel().bits(0b11));
gpio_a.pctl.write(|w| unsafe { w.pmc0().bits(1).pmc1().bits(1) });
sysctl.rcgcuart.modify(|_, w| w.r0().bit(true));
while !sysctl.pruart.read().r0().bit() {}
let uart_0 = tm4c129x::UART0.borrow(cs);
uart_0.cc.write(|w| w.cs().altclk());
uart_0.ibrd.write(|w| w.divint().bits((UART_DIV_16P6 >> 6) as u16));
uart_0.fbrd.write(|w| w.divfrac().bits(UART_DIV_16P6 as u8));
uart_0.lcrh.write(|w| w.wlen()._8().fen().bit(true));
uart_0.ctl.write(|w| w.rxe().bit(true).txe().bit(true).uarten().bit(true));
// Set up LEDs
let gpio_k = tm4c129x::GPIO_PORTK.borrow(cs);
gpio_k.dir.write(|w| w.dir().bits(LED1|LED2));
gpio_k.den.write(|w| w.den().bits(LED1|LED2));
// Set up gain and emission range control pins
let gpio_p = tm4c129x::GPIO_PORTP.borrow(cs);
gpio_p.dir.write(|w| w.dir().bits(0b111111));
gpio_p.den.write(|w| w.den().bits(0b111111));
// Set up error pins
let gpio_l = tm4c129x::GPIO_PORTL.borrow(cs);
let gpio_q = tm4c129x::GPIO_PORTQ.borrow(cs);
gpio_l.pur.write(|w| w.pue().bits(FV_ERRN|FBV_ERRN|FBI_ERRN|AV_ERRN|AI_ERRN));
gpio_l.den.write(|w| w.den().bits(FV_ERRN|FBV_ERRN|FBI_ERRN|AV_ERRN|AI_ERRN|ERR_LATCHN));
gpio_q.dir.write(|w| w.dir().bits(ERR_RESN));
gpio_q.den.write(|w| w.den().bits(ERR_RESN));
error_reset();
// Set up PWMs
let gpio_f = tm4c129x::GPIO_PORTF_AHB.borrow(cs);
gpio_f.dir.write(|w| w.dir().bits(HV_PWM|FV_PWM));
gpio_f.den.write(|w| w.den().bits(HV_PWM|FV_PWM));
gpio_f.afsel.write(|w| w.afsel().bits(HV_PWM|FV_PWM));
gpio_f.pctl.write(|w| unsafe { w.pmc0().bits(6).pmc2().bits(6) });
let gpio_g = tm4c129x::GPIO_PORTG_AHB.borrow(cs);
gpio_g.dir.write(|w| w.dir().bits(FBV_PWM));
gpio_g.den.write(|w| w.den().bits(FBV_PWM));
gpio_g.afsel.write(|w| w.afsel().bits(FBV_PWM));
gpio_g.pctl.write(|w| unsafe { w.pmc0().bits(6) });
sysctl.rcgcpwm.modify(|_, w| w.r0().bit(true));
while !sysctl.prpwm.read().r0().bit() {}
let pwm0 = tm4c129x::PWM0.borrow(cs);
// HV_PWM
pwm0._0_gena.write(|w| w.actload().zero().actcmpad().one());
pwm0._0_load.write(|w| w.load().bits(PWM_LOAD));
pwm0._0_cmpa.write(|w| w.compa().bits(0));
pwm0._0_ctl.write(|w| w.enable().bit(true));
// FV_PWM
pwm0._1_gena.write(|w| w.actload().zero().actcmpad().one());
pwm0._1_load.write(|w| w.load().bits(PWM_LOAD));
pwm0._1_cmpa.write(|w| w.compa().bits(0));
pwm0._1_ctl.write(|w| w.enable().bit(true));
// FBV_PWM
pwm0._2_gena.write(|w| w.actload().zero().actcmpad().one());
pwm0._2_load.write(|w| w.load().bits(PWM_LOAD));
pwm0._2_cmpa.write(|w| w.compa().bits(0));
pwm0._2_ctl.write(|w| w.enable().bit(true));
// Enable all at once
pwm0.enable.write(|w| {
w.pwm0en().bit(true)
.pwm2en().bit(true)
.pwm4en().bit(true)
});
// Set up ADC
let gpio_d = tm4c129x::GPIO_PORTD_AHB.borrow(cs);
let gpio_e = tm4c129x::GPIO_PORTE_AHB.borrow(cs);
gpio_d.afsel.write(|w| w.afsel().bits(FBV_ADC|AV_ADC));
gpio_d.amsel.write(|w| w.amsel().bits(FBV_ADC|AV_ADC));
gpio_e.afsel.write(|w| w.afsel().bits(FD_ADC|FV_ADC|FBI_ADC|IC_ADC));
gpio_e.amsel.write(|w| w.amsel().bits(FD_ADC|FV_ADC|FBI_ADC|IC_ADC));
sysctl.rcgcadc.modify(|_, w| w.r0().bit(true));
while !sysctl.pradc.read().r0().bit() {}
let adc0 = tm4c129x::ADC0.borrow(cs);
// Due to silicon erratum, this HAS to use PLL. PIOSC is not a suitable source.
// fADC=32 MHz
adc0.cc.write(|w| w.cs().syspll().clkdiv().bits(10));
adc0.im.write(|w| w.mask0().bit(true));
adc0.emux.write(|w| w.em0().always());
adc0.ssmux0.write(|w| {
w.mux0().bits(0) // IC_ADC
.mux1().bits(1) // FBI_ADC
.mux2().bits(2) // FV_ADC
.mux3().bits(3) // FD_ADC
.mux4().bits(5) // AV_ADC
.mux5().bits(6) // FBV_ADC
});
adc0.ssctl0.write(|w| w.ie5().bit(true).end5().bit(true));
adc0.sstsh0.write(|w| {
w.tsh0()._4()
.tsh1()._4()
.tsh2()._4()
.tsh3()._4()
.tsh4()._4()
.tsh5()._4()
});
adc0.sac.write(|w| w.avg()._64x());
adc0.ctl.write(|w| w.vref().bit(true));
adc0.actss.write(|w| w.asen0().bit(true));
let nvic = tm4c129x::NVIC.borrow(cs);
nvic.enable(Interrupt::ADC0SS0);
set_emission_range(EmissionRange::Med);
HV_PID.borrow(cs).borrow_mut().set_target(200.0);
set_fv_pwm(PWM_LOAD/16);
set_fbv_pwm(PWM_LOAD/8);
board::set_emission_range(board::EmissionRange::High);
LOOP_ANODE.borrow(cs).borrow_mut().set_target(30.0+12.0);
//set_fv_pwm(10);
board::set_fbv_pwm(20);
});
println!("ready");
loop {
cortex_m::interrupt::free(|cs| {
let gpio_l = tm4c129x::GPIO_PORTL.borrow(cs);
let errors_n = gpio_l.data.read().bits() as u8;
if errors_n & FV_ERRN == 0 {
hprintln!("Filament overvolt");
}
if errors_n & FBV_ERRN == 0 {
hprintln!("Filament bias overvolt");
}
if errors_n & FBI_ERRN == 0 {
hprintln!("Filament bias overcurrent");
}
if errors_n & AV_ERRN == 0 {
hprintln!("Anode overvolt");
}
if errors_n & AI_ERRN == 0 {
hprintln!("Anode overcurrent");
}
});
}
}
use cortex_m::exception::SysTick;
extern fn sys_tick(ctxt: SysTick) {
static ELAPSED: Local<Cell<u32>, SysTick> = Local::new(Cell::new(0));
let elapsed = ELAPSED.borrow(&ctxt);
elapsed.set(elapsed.get() + 1);
if elapsed.get() % 100 == 0 {
set_led(LED1, true);
set_led(LED2, false);
}
if elapsed.get() % 100 == 50 {
set_led(LED1, false);
set_led(LED2, true);
board::process_errors();
}
}
use tm4c129x::interrupt::ADC0SS0;
extern fn adc0_ss0(_ctxt: ADC0SS0) {
extern fn adc0_ss0(ctxt: ADC0SS0) {
static ELAPSED: Local<Cell<u32>, ADC0SS0> = Local::new(Cell::new(0));
let elapsed = ELAPSED.borrow(&ctxt);
cortex_m::interrupt::free(|cs| {
let adc0 = tm4c129x::ADC0.borrow(cs);
if adc0.ostat.read().ov0().bit() {
@ -374,21 +94,31 @@ extern fn adc0_ss0(_ctxt: ADC0SS0) {
adc0.isc.write(|w| w.in0().bit(true));
let _ic_sample = adc0.ssfifo0.read().data().bits();
let _fbi_sample = adc0.ssfifo0.read().data().bits();
let _fv_sample = adc0.ssfifo0.read().data().bits();
let _fd_sample = adc0.ssfifo0.read().data().bits();
let fbi_sample = adc0.ssfifo0.read().data().bits();
let fv_sample = adc0.ssfifo0.read().data().bits();
let fd_sample = adc0.ssfifo0.read().data().bits();
let av_sample = adc0.ssfifo0.read().data().bits();
let _fbv_sample = adc0.ssfifo0.read().data().bits();
let fbv_sample = adc0.ssfifo0.read().data().bits();
let mut hv_pid = HV_PID.borrow(cs).borrow_mut();
set_hv_pwm(hv_pid.update(av_sample as f32) as u16);
let mut loop_anode = LOOP_ANODE.borrow(cs).borrow_mut();
let mut loop_cathode = LOOP_CATHODE.borrow(cs).borrow_mut();
loop_anode.adc_input(av_sample);
loop_cathode.adc_input(fbi_sample, fd_sample, fv_sample, fbv_sample);
if elapsed.get() % 100 == 0 {
board::set_led(1, true);
board::set_led(2, false);
}
if elapsed.get() % 100 == 50 {
board::set_led(1, false);
board::set_led(2, true);
}
})
}
#[used]
#[link_section = ".rodata.exceptions"]
pub static EXCEPTIONS: ExceptionHandlers = ExceptionHandlers {
sys_tick: sys_tick,
..cortex_m::exception::DEFAULT_HANDLERS
};

View File

@ -1,3 +1,5 @@
use core::num::Float;
#[derive(Clone, Copy)]
pub struct Parameters {
pub kp: f32,
@ -60,6 +62,14 @@ impl Controller {
self.target = target
}
#[allow(dead_code)]
pub fn is_within(&mut self, tolerance: f32) -> bool {
match self.last_input {
None => false,
Some(last_input) => (last_input - self.target).abs() < tolerance
}
}
#[allow(dead_code)]
pub fn reset(&mut self) {
self.integral = 0.0;