M-Labs
/
ionpak-thermostat
7
0
Fork 1
Code Issues Pull Requests Releases Wiki Activity

update errata

pull/1/head
Sebastien Bourdeauducq 2018-02-13 18:26:13 +08:00
parent cf2e3c251e
commit 9a1d839e19
2 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -3,7 +3,7 @@ ionpak
A modern, low-cost universal controller for hot-cathode ionization vacuum gauges.
![Test setup](https://raw.githubusercontent.com/m-labs/ionpak/master/pictures/full_ionpak_front_resized.jpg)
![ionpak picture](https://raw.githubusercontent.com/m-labs/ionpak/master/pictures/full_ionpak_front_resized.jpg)
Why?
----

2
hardware/errata.md
View File

@ -44,3 +44,5 @@ Rev 1
* add plated-through holes and pads for mounting rods of BNC connector
* simplify FBI circuit, 2 ranges only (typ. 8mA and 45mA), remove diodes and neglect MOSFET leakage
* to support different case designs, replace the holes on the connectors side with slots. One of the case designs requires holes whose center is at 11.5mm from the board edge.
* review choice of external LED connector type and clearance
* if using a non-polarized connector, change pinout so that connecting the LEDs the wrong way cannot cause damage