compute emission current, filament voltage and bias voltage

firmware/src/board.rs

@@ -31,9 +31,17 @@ const UART_DIV_16P6: u32 = /*altclk*/16_000_000 * (1 << /*len(divfrac)*/6) /
 
 pub const AV_ADC_GAIN: f32 = 6.792703150912105;
 pub const FV_ADC_GAIN: f32 = 501.83449105726623;
+pub const FBI_ADC_GAIN: f32 = 1333.3333333333333;
+pub const FBI_ADC_OFFSET: f32 = 96.0;
+pub const FD_ADC_GAIN: f32 = 4170.212765957447;
+pub const FD_ADC_OFFSET: f32 = 96.0;
 pub const FBV_ADC_GAIN: f32 = 49.13796058269066;
 pub const FBV_PWM_GAIN: f32 = 0.5730803571428571;
 
+pub const FBI_R223: f32 = 200.0;
+pub const FBI_R224: f32 = 39.0;
+pub const FBI_R225: f32 = 22000.0;
+
 
 pub fn set_led(nr: u8, state: bool) {
     let bit = match nr {
@@ -72,7 +80,8 @@ pub fn set_fbv_pwm(duty: u16) {
     });
 }
 
-#[allow(dead_code)]
+
+#[derive(Clone, Copy)]
 pub enum EmissionRange {
     Low,  // 22K
     Med,  // 22K//(200Ω + compensated diode)

firmware/src/loop_cathode.rs

@@ -14,9 +14,14 @@ const PID_PARAMETERS: pid::Parameters = pid::Parameters {
 };
 
 pub struct Controller {
+    fbi_target: f32,
+    fbi_range: board::EmissionRange,
+    last_fbi: Option<f32>,
     pid: pid::Controller,
-    fbv_target: f32,
+
     last_fv: Option<f32>,
+
+    fbv_target: f32,
     last_fbv: Option<f32>
 }
 
@@ -24,16 +29,46 @@ pub struct Controller {
 impl Controller {
     pub const fn new() -> Controller {
         Controller {
+            fbi_target: 0.0,
+            fbi_range: board::EmissionRange::Low,
+            last_fbi: None,
             pid: pid::Controller::new(PID_PARAMETERS),
-            fbv_target: 0.0,
+
             last_fv: None,
+
+            fbv_target: 0.0,
             last_fbv: None,
         }
     }
 
-    pub fn adc_input(&mut self, _fbi_sample: u16, _fd_sample: u16, fv_sample: u16, fbv_sample: u16) {
+    pub fn adc_input(&mut self, fbi_sample: u16, fd_sample: u16, fv_sample: u16, fbv_sample: u16) {
-        self.last_fbv = Some(fbv_sample as f32/board::FBV_ADC_GAIN);
+        let fbi_voltage = ((fbi_sample as f32) - board::FBI_ADC_OFFSET)/board::FBI_ADC_GAIN;
+        let fbi_r225 = fbi_voltage/board::FBI_R225;
+        self.last_fbi = Some(match self.fbi_range {
+            board::EmissionRange::Low => fbi_r225,
+            board::EmissionRange::Med => {
+                let fd_voltage = ((fd_sample as f32) - board::FD_ADC_OFFSET)/board::FD_ADC_GAIN;
+                fbi_r225 + (fbi_voltage - fd_voltage)/board::FBI_R223
+            },
+            board::EmissionRange::High => {
+                let fd_voltage = 0.9;
+                fbi_r225 + (fbi_voltage - fd_voltage)/board::FBI_R224
+            }
+        });
         self.last_fv = Some(fv_sample as f32/board::FV_ADC_GAIN);
+        self.last_fbv = Some(fbv_sample as f32/board::FBV_ADC_GAIN);
+    }
+
+    pub fn set_emission_target(&mut self, amperes: f32) {
+        self.fbi_target = amperes;
+        self.fbi_range = board::EmissionRange::Low;
+        if amperes > 120e-6 {
+            self.fbi_range = board::EmissionRange::Med;
+        }
+        if amperes > 8e-3 {
+            self.fbi_range = board::EmissionRange::High;
+        }
+        board::set_emission_range(self.fbi_range);
     }
 
     pub fn set_bias_target(&mut self, volts: f32) {
@@ -53,6 +88,9 @@ impl Controller {
     }
 
     pub fn ready(&self) -> bool {
+        hprintln!("emission current: {}mA", 1000.0*self.last_fbi.unwrap());
+        hprintln!("filament voltage: {}V", self.last_fv.unwrap());
+        hprintln!("bias voltage: {}V", self.last_fbv.unwrap());
         self.emission_ready() & self.bias_ready()
     }
 }

firmware/src/main.rs

@@ -68,11 +68,14 @@ fn main() {
         let nvic = tm4c129x::NVIC.borrow(cs);
         nvic.enable(Interrupt::ADC0SS0);
 
-        board::set_emission_range(board::EmissionRange::High);
+        let mut loop_anode = LOOP_ANODE.borrow(cs).borrow_mut();
-        let bias = 15.0;
+        let mut loop_cathode = LOOP_CATHODE.borrow(cs).borrow_mut();
-        LOOP_ANODE.borrow(cs).borrow_mut().set_target(70.0+bias);
+        let anode_cathode = 60.0;
-        LOOP_CATHODE.borrow(cs).borrow_mut().set_bias_target(bias);
+        let cathode_bias = 12.0;
-        //board::set_fv_pwm(10);
+        loop_anode.set_target(anode_cathode+cathode_bias);
+        loop_cathode.set_emission_target(anode_cathode/10000.0);
+        loop_cathode.set_bias_target(cathode_bias);
+        board::set_fv_pwm(10);
     });
 
     println!("ready");
@@ -115,7 +118,10 @@ extern fn adc0_ss0(ctxt: ADC0SS0) {
             board::set_led(1, false);
             board::set_led(2, true);
         }
-    })
+        if elapsed.get() == 1000 {
+            loop_cathode.ready();
+        }
+    });
 }
 
 #[used]