improve readme appearance

This commit is contained in:
Sebastien Bourdeauducq 2017-05-04 16:18:08 +08:00
parent c2934d6940
commit 2f2c53b28e
3 changed files with 4 additions and 11 deletions

View File

@ -1,4 +1,4 @@
Ionpak ionpak
====== ======
A modern, low-cost universal controller for ionization vacuum gauges. A modern, low-cost universal controller for ionization vacuum gauges.
@ -8,21 +8,14 @@ A modern, low-cost universal controller for ionization vacuum gauges.
Flyback transformer construction Flyback transformer construction
-------------------------------- --------------------------------
TR300 TR300: Use EPCOS coilformer B66208X1010T1. Wind 5 turns on the primary and spread them across the length of the coilformer - it is important that the air gap between the cores is covered by windings. Wind 70 turns on the secondary in multiple layers. As with all flyback transformers, the polarity of the windings is critical. Assemble with EPCOS cores B66317G500X127 and B66317GX127 (one half gapped core, one half ungapped core), and corresponding clips.
*****
Use EPCOS coilformer B66208X1010T1. Wind 5 turns on the primary and spread them across the length of the coilformer - it is important that the air gap between the cores is covered by windings. Wind 70 turns on the secondary in multiple layers. As with all flyback transformers, the polarity of the windings is critical. Assemble with EPCOS cores B66317G500X127 and B66317GX127 (one half gapped core, one half ungapped core), and corresponding clips. TR350: Use EPCOS coilformer B66206W1110T1 and cores B66311G250X127 and B66311GX127. Both the primary and the secondary have 5 turns and must be wound together, interleaving the windings. The same remarks as for TR300 apply.
TR350
*****
Use EPCOS coilformer B66206W1110T1 and cores B66311G250X127 and B66311GX127. Both the primary and the secondary have 5 turns and must be wound together, interleaving the windings. The same remarks as for TR300 apply.
Errata Errata
------ ------
PCB rev 1 PCB rev 1:
*********
* R307 needs more clearance from D400 * R307 needs more clearance from D400
* Pins 1 and 12 of U502 need pull-downs * Pins 1 and 12 of U502 need pull-downs

Binary file not shown.

Before

Width:  |  Height:  |  Size: 143 KiB

After

Width:  |  Height:  |  Size: 203 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 64 KiB

After

Width:  |  Height:  |  Size: 38 KiB