attenuator: fix return data

This commit is contained in:
occheung 2020-08-21 14:18:33 +08:00
parent 2d7302bdca
commit dbea9aba30
5 changed files with 58 additions and 32 deletions

View File

@ -1,5 +1,5 @@
[target.thumbv7em-none-eabihf]
runner = "gdb -q -x gdb_config/fpga_config.gdb"
runner = "gdb -q -x gdb_config/openocd.gdb"
rustflags = [
"-C", "link-arg=-Tlink.x",
]

View File

@ -20,7 +20,7 @@ from migen.build.generic_platform import *
# Filter out SPI record
_io = [record for record in _io if record[0] != "spi"]
# Reinsert new SPI record
# Reinsert new SPI record, without MISO
_io.append(
("spi", 0,
Subsignal("cs" , Pins("B13 B14 B15")),
@ -31,6 +31,15 @@ _io.append(
)
)
# Insert LVDS input
_io.append(
("eem_in", 2,
Subsignal("p", Pins("C1")),
Subsignal("n", Pins("C2")),
IOStandard("LVDS25"),
)
)
# Inherit Platform to gain the programmed clock attribute
class HumpbackPlatform(Platform):

View File

@ -34,16 +34,24 @@ where
self.data[i] = self.data[i] << 2;
}
let mut clone = self.data.clone();
// Transmit SPI once to set attenuation
if self.spi.transfer(&mut clone).map_err(Error::SPI).is_err() {
return Err(Error::AttenuatorError);
}
// Transmit the same data again, to get the return value
// Report the data returned by SPI, or an error
clone = self.data.clone();
match self.spi.transfer(&mut clone).map_err(Error::SPI) {
Ok(arr) => {
Ok(self.data.clone())
Ok([arr[0], arr[1], arr[2], arr[3]])
},
err => Err(Error::AttenuatorError)
}
}
pub fn set_channel_attenuation(&mut self, channel: u8, attenuation: f32) -> Result<u8, Error<E>> {
assert!((channel < 4) && (channel >= 0));
assert!(channel < 4);
let mut arr: [f32; 4] = self.get_attenuation();
arr[channel as usize] = attenuation;
match self.set_attenuation(arr) {
@ -53,7 +61,7 @@ where
}
pub fn get_channel_attenuation(&mut self, channel: u8) -> f32 {
assert!((channel < 4) && (channel >= 0));
assert!(channel < 4);
(self.data[channel as usize] as f32)/8.0
}

View File

@ -60,7 +60,7 @@ where
{
type Error = Error<E>;
fn select_chip(&mut self, chip: u8) -> Result<(), Self::Error> {
hprintln!("Select chip: {}", chip).unwrap();
hprintln!("Selected chip {}.", chip);
match chip & (1 << 0) {
0 => self.chip_select.0.set_low(),
_ => self.chip_select.0.set_high(),

View File

@ -49,6 +49,7 @@ fn main() -> ! {
let gpiob = dp.GPIOB.split(ccdr.peripheral.GPIOB);
let gpioc = dp.GPIOC.split(ccdr.peripheral.GPIOC);
let gpiod = dp.GPIOD.split(ccdr.peripheral.GPIOD);
let gpioe = dp.GPIOE.split(ccdr.peripheral.GPIOE);
let gpiof = dp.GPIOF.split(ccdr.peripheral.GPIOF);
// Setup CDONE for checking
@ -71,8 +72,11 @@ fn main() -> ! {
let sclk = gpioa.pa5.into_alternate_af5();
let mosi = gpiob.pb5.into_alternate_af5();
let miso = gpioa.pa6.into_alternate_af5();
// let mut sclk = gpioa.pa5.into_push_pull_output();
// let mut mosi = gpiob.pb5.into_push_pull_output();
// let mut miso = gpioa.pa6.into_pull_up_input();
let (cs0, cs1, cs2) = (
let (mut cs0, mut cs1, mut cs2) = (
gpiob.pb12.into_push_pull_output(),
gpioa.pa15.into_push_pull_output(),
gpioc.pc7.into_push_pull_output(),
@ -81,40 +85,45 @@ fn main() -> ! {
let mut spi = dp.SPI1.spi(
(sclk, miso, mosi),
spi::MODE_0,
12.mhz(),
3.mhz(),
ccdr.peripheral.SPI1,
&ccdr.clocks,
);
let mut switch = CPLD::new(spi, (cs0, cs1, cs2));
// debug led
let mut yellow = gpioe.pe1.into_push_pull_output();
yellow.set_high().unwrap();
let mut switch = CPLD::new(spi, (cs0, cs1, cs2));
let parts = switch.split();
let mut attenuator = Attenuator::new(parts.spi2);
let mut attenuation :[f32; 4] = [24.0, -5.0, 32.0, 10.2];
attenuator.set_attenuation(attenuation);
attenuator.set_channel_attenuation(2, 15.3);
let mut config = ConfigRegister::new(parts.spi1);
// Target configuration: 0x000FF1CE
hprintln!("{:#06X}", config.set_configurations(&mut [
(CFGMask::RF_SW, 0xE),
(CFGMask::LED, 0xC),
(CFGMask::PROFILE, 0x1),
(CFGMask::IO_UPDATE, 0x1),
(CFGMask::MASK_NU, 0xF),
(CFGMask::CLK_SEL0, 0x1),
(CFGMask::SYNC_SEL, 0x1),
(CFGMask::RST, 0x1),
(CFGMask::IO_RST, 0x0),
(CFGMask::CLK_SEL1, 0x0),
(CFGMask::DIV, 0x0),
]).unwrap()).unwrap();
let mut dds = DDS::new(parts.spi4);
let mut att = Attenuator::new(parts.spi2);
loop {
nop();
// let mut counter = config.get_configuration(CFGMask::RF_SW);
// hprintln!("{}", counter);
// config.set_configurations(&mut [
// (CFGMask::RF_SW, ((counter + 1)%16) as u32)
// ]).unwrap();
hprintln!("{:?}", att.set_attenuation([33.0, -1.0, 24.0, 12.0]).unwrap()).unwrap();
hprintln!("{:?}", att.set_attenuation([0.0, 0.0, 0.0, 0.0]).unwrap()).unwrap();
}
/*
cs0.set_low().unwrap();
cs1.set_low().unwrap();
cs2.set_low().unwrap();
let mut arr: [u8; 4] = [0x12, 0x34, 0x56, 0x78];
loop {
arr[0] = 0x12;
arr[1] = 0x34;
arr[2] = 0x56;
arr[3] = 0x78;
cs1.set_high().unwrap();
hprintln!("{:?}", spi.transfer(&mut arr).unwrap()).unwrap();
cs1.set_low().unwrap();
}
*/
}