mirror of https://github.com/m-labs/artiq.git
142 lines
4.9 KiB
Python
142 lines
4.9 KiB
Python
import numpy as np
|
|
|
|
from artiq import *
|
|
from artiq.coredevice import comm_serial, core, dds, rtio
|
|
from artiq.devices import pdq2
|
|
|
|
|
|
class Transport(AutoContext):
|
|
parameters = (
|
|
"bd pmt repeats nbins "
|
|
"electrodes transport_data wait_at_stop speed"
|
|
)
|
|
|
|
def prepare(self, stop):
|
|
t = self.transport_data["t"][:stop]*self.speed
|
|
u = self.transport_data["u"][:stop]
|
|
# start a new frame
|
|
self.tf = self.electrodes.create_frame()
|
|
# interpolates t and u and appends the (t, u) segment to the frame
|
|
# adds wait-for-trigger to the first line/spline knot
|
|
# will also apply offset and gain calibration data
|
|
# stores duration and the fact that this segment needs to be triggered
|
|
# both (duration and segment triggering flag) to be retrieved during
|
|
# kernel compilation, see transport()
|
|
self.tf.append("to_stop",
|
|
t, u, trigger=True)
|
|
# append the reverse transport (from stop to 0)
|
|
# both durations are the same in this case
|
|
self.tf.append("from_stop",
|
|
t[-1] - t[::-1], u[::-1], trigger=True)
|
|
# closes the frame with a wait line before jumping back into
|
|
# the jump table so that frame signal can be set before the jump
|
|
# also mark the frame as closed and prevent further append()ing
|
|
self.tf.close()
|
|
# user must pass all frames that are going to be used next
|
|
# selects possible frame id based on rtio_frame assignments
|
|
# from core device
|
|
# distributes frames to the sub-devices in CompoundPDQ2
|
|
# and uploads them
|
|
# uploading is ARM_DIS, writing, ARM_EN
|
|
self.electrodes.prepare(self.tf)
|
|
|
|
@kernel
|
|
def cool(self):
|
|
with parallel:
|
|
self.bd.pulse(200*MHz, 1*ms)
|
|
self.bdd.pulse(300*MHz, 1*ms)
|
|
self.bd.pulse(210*MHz, 100*us)
|
|
|
|
@kernel
|
|
def transport(self):
|
|
# ensures no frame is currently being actively played
|
|
# set rtio frame select signal to frame id
|
|
# rtio trigger jump into transport frame
|
|
# (does not advance the timeline)
|
|
self.tf.begin()
|
|
# triggers pdqs to start transport frame segment
|
|
# plays the transport waveform from 0 to stop
|
|
# delay()s the core by the duration of the waveform segment
|
|
self.tf.to_stop.advance()
|
|
# leaves the ion in the dark at the transport endpoint
|
|
delay(self.wait_at_stop)
|
|
# transport back (again: trigger, delay())
|
|
# segments can only be advance()ed in order
|
|
self.tf.from_stop.advance()
|
|
# ensures all segments have been advanced() through, must leave pdq
|
|
# in a state where the next frame can begin()
|
|
self.tf.finish()
|
|
|
|
@kernel
|
|
def detect(self):
|
|
with parallel:
|
|
self.bd.pulse(220*MHz, 100*us)
|
|
self.pmt.gate_rising(100*us)
|
|
self.bd.on(200*MHz)
|
|
self.bdd.on(300*MHz)
|
|
return self.pmt.count()
|
|
|
|
@kernel
|
|
def one(self):
|
|
self.cool()
|
|
self.transport()
|
|
return self.detect()
|
|
|
|
@kernel
|
|
def repeat(self):
|
|
hist = array(0, self.nbins)
|
|
|
|
for i in range(self.repeats):
|
|
n = self.one()
|
|
if n >= self.nbins:
|
|
n = self.nbins-1
|
|
hist[n] += 1
|
|
|
|
for i in range(self.nbins):
|
|
self.histogram.append(hist[i])
|
|
|
|
def scan(self, stops):
|
|
for s in stops:
|
|
self.histogram = []
|
|
# non-kernel, calculate waveforms, build frames
|
|
# could also be rpc'ed from repeat()
|
|
self.prepare(s)
|
|
# kernel part
|
|
self.repeat()
|
|
# live update 2d plot with current self.histogram
|
|
# broadcast(s, self.histogram)
|
|
|
|
|
|
if __name__ == "__main__":
|
|
# data is usually precomputed offline
|
|
data = dict(
|
|
t=np.linspace(0, 10, 101), # waveform time
|
|
u=np.random.randn(101, 4*3*3), # waveform data,
|
|
# 4 devices, 3 board each, 3 dacs each
|
|
)
|
|
|
|
with comm_serial.Comm() as comm:
|
|
coredev = core.Core(comm)
|
|
exp = Transport(
|
|
core=coredev,
|
|
bd=dds.DDS(core=coredev, dds_sysclk=1*GHz,
|
|
reg_channel=0, rtio_switch=1),
|
|
bdd=dds.DDS(core=coredev, dds_sysclk=1*GHz,
|
|
reg_channel=1, rtio_switch=2),
|
|
pmt=rtio.RTIOIn(core=coredev, channel=0),
|
|
# a compound pdq device that wraps multiple usb devices (looked up
|
|
# by usb "serial number"/id) into one
|
|
electrodes=pdq2.CompoundPDQ2(
|
|
core=coredev,
|
|
ids=["qc_q1_{}".format(i) for i in range(4)],
|
|
rtio_trigger=3, rtio_frame=(4, 5, 6)),
|
|
transport_data=data, # or: json.load
|
|
wait_at_stop=100*us,
|
|
speed=1.5,
|
|
repeats=100,
|
|
nbins=100
|
|
)
|
|
# scan transport endpoint
|
|
stop = range(10, len(exp.transport_data["t"]), 10)
|
|
exp.scan(stop)
|