mirror of
https://github.com/m-labs/artiq.git
synced 2024-12-19 00:16:29 +08:00
220 lines
5.3 KiB
ReStructuredText
220 lines
5.3 KiB
ReStructuredText
Network device support packages reference
|
|
=========================================
|
|
|
|
|
|
PDQ2
|
|
----
|
|
|
|
Driver
|
|
++++++
|
|
|
|
.. automodule:: artiq.devices.pdq2.driver
|
|
:members:
|
|
|
|
Mediator
|
|
++++++++
|
|
|
|
.. automodule:: artiq.devices.pdq2.mediator
|
|
:members:
|
|
|
|
Controller
|
|
++++++++++
|
|
|
|
.. argparse::
|
|
:ref: artiq.frontend.pdq2_controller.get_argparser
|
|
:prog: pdq2_controller
|
|
|
|
Client
|
|
++++++
|
|
|
|
.. argparse::
|
|
:ref: artiq.frontend.pdq2_client.get_argparser
|
|
:prog: pdq2_client
|
|
|
|
Lab Brick Digital Attenuator (LDA)
|
|
----------------------------------
|
|
|
|
On Linux, you need to give your user access to the USB device.
|
|
|
|
You can do that by creating a file under ``/etc/udev/rules.d/`` named
|
|
``99-lda.rules`` with the following content::
|
|
|
|
SUBSYSTEM=="usb", ATTR{idVendor}=="041f", MODE="0666"
|
|
|
|
Then you need to tell udev to reload its rules::
|
|
|
|
$ sudo invoke-rc.d udev reload
|
|
|
|
You must also unplug/replug your device if it was already plugged in.
|
|
|
|
Then, to run the Lab Brick Digital Attenuator (LDA) controller::
|
|
|
|
$ lda_controller -d SN:xxxxx
|
|
|
|
The serial number must contain exactly 5 digits, prepend it with the necessary number of 0s.
|
|
Also, the ``SN:`` prefix is mandatory.
|
|
|
|
You can choose the LDA model with the ``-P`` parameter. The default is LDA-102.
|
|
|
|
Driver
|
|
++++++
|
|
|
|
.. automodule:: artiq.devices.lda.driver
|
|
:members:
|
|
|
|
Controller
|
|
++++++++++
|
|
|
|
.. argparse::
|
|
:ref: artiq.frontend.lda_controller.get_argparser
|
|
:prog: lda_controller
|
|
|
|
Novatech 409B
|
|
-------------
|
|
|
|
Driver
|
|
++++++
|
|
|
|
.. automodule:: artiq.devices.novatech409b.driver
|
|
:members:
|
|
|
|
Controller
|
|
++++++++++
|
|
|
|
.. argparse::
|
|
:ref: artiq.frontend.novatech409b_controller.get_argparser
|
|
:prog: novatech409b_controller
|
|
|
|
Thorlabs T-Cube
|
|
---------------
|
|
|
|
.. _tdc001-controller-usage-example:
|
|
|
|
TDC001 controller usage example
|
|
+++++++++++++++++++++++++++++++
|
|
|
|
First, run the TDC001 controller::
|
|
|
|
$ thorlabs_tcube_controller -P TDC001 -d /dev/ttyUSBx
|
|
|
|
.. note::
|
|
On Windows the serial port (the ``-d`` argument) will be of the form ``COMx``.
|
|
|
|
.. note::
|
|
Anything compatible with `serial_for_url <http://pyserial.sourceforge.net/pyserial_api.html#serial.serial_for_url>`_
|
|
can be given as a device in ``-d`` argument.
|
|
|
|
For instance, if you want to specify the Vendor/Product ID and the USB Serial Number, you can do:
|
|
|
|
``-d "hwgrep://<VID>:<PID> SNR=<serial_number>"``.
|
|
for instance:
|
|
|
|
``-d "hwgrep://0403:faf0 SNR=83852734"``
|
|
|
|
The hwgrep URL works on both Linux and Windows.
|
|
|
|
Then, send commands to it via the ``artiq_rpctool`` utility::
|
|
|
|
$ artiq_rpctool ::1 3255 list-targets
|
|
Target(s): tdc001
|
|
$ artiq_rpctool ::1 3255 call move_relative 10000 # will move forward
|
|
$ artiq_rpctool ::1 3255 call move_relative -10000 # will move backward
|
|
$ artiq_rpctool ::1 3255 call move_absolute 20000 # absolute move to 20000
|
|
$ artiq_rpctool ::1 3255 call move_home # will go back to home position
|
|
$ artiq_rpctool ::1 3255 call close # close the device
|
|
|
|
TPZ001 controller usage example
|
|
+++++++++++++++++++++++++++++++
|
|
|
|
First, run the TPZ001 controller::
|
|
|
|
$ thorlabs_tcube_controller -P TPZ001 -d /dev/ttyUSBx
|
|
|
|
.. note::
|
|
On Windows the serial port (the ``-d`` argument) will be of the form ``COMx``.
|
|
|
|
.. note::
|
|
See the :ref:`TDC001 documentation <tdc001-controller-usage-example>` for
|
|
how to specify the USB Serial Number of the device instead of the
|
|
/dev/ttyUSBx (or the COMx name).
|
|
|
|
Then, send commands to it via the ``artiq_rpctool`` utility::
|
|
|
|
$ artiq_rpctool ::1 3255 list-targets
|
|
Target(s): tpz001
|
|
$ artiq_rpctool ::1 3255 call set_output_volts 15 # set output voltage to 15 V
|
|
$ artiq_rpctool ::1 3255 call get_output_volts # read back output voltage
|
|
15
|
|
$ artiq_rpctool ::1 3255 call set_tpz_io_settings 150 1 # set maximum output voltage to 150 V
|
|
$ artiq_rpctool ::1 3255 call set_output_volts 150 # set output voltage to 150 V
|
|
$ artiq_rpctool ::1 3255 call close # close the device
|
|
|
|
TDC001 Driver
|
|
+++++++++++++
|
|
|
|
.. autoclass:: artiq.devices.thorlabs_tcube.driver.Tdc
|
|
:members:
|
|
|
|
TPZ001 Driver
|
|
+++++++++++++
|
|
|
|
.. autoclass:: artiq.devices.thorlabs_tcube.driver.Tpz
|
|
:members:
|
|
|
|
Controller
|
|
++++++++++
|
|
|
|
.. argparse::
|
|
:ref: artiq.frontend.thorlabs_tcube_controller.get_argparser
|
|
:prog: thorlabs_controller
|
|
|
|
|
|
NI PXI6733
|
|
----------
|
|
|
|
PXI6733 controller usage example
|
|
++++++++++++++++++++++++++++++++
|
|
|
|
This controller has only been tested on Windows so far.
|
|
|
|
To use this controller you need first to install the NI-DAQmx driver
|
|
from http://www.ni.com/downloads/ni-drivers/f/.
|
|
|
|
Then you also need to install PyDAQmx python module::
|
|
|
|
$ git clone https://github.com/clade/PyDAQmx
|
|
$ cd PyDAQmx
|
|
$ C:\Python34\Tools\Scripts\2to3.py -w .
|
|
$ python setup.py build
|
|
$ python setup.py install
|
|
|
|
Then, you can run the PXI6733 controller::
|
|
|
|
$ pxi6733_controller -d Dev1
|
|
|
|
Then, send a load_sample_values command to it via the ``artiq_rpctool`` utility::
|
|
|
|
$ artiq_rpctool ::1 3256 list-targets
|
|
Target(s): pxi6733
|
|
$ artiq_rpctool ::1 3256 call load_sample_values 'np.array([1.0, 2.0, 3.0, 4.0], dtype=float)'
|
|
|
|
This loads 4 voltage values as a numpy float array: 1.0 V, 2.0 V, 3.0 V, 4.0 V
|
|
|
|
Then the device is set up to output those samples at each rising edge of the clock.
|
|
|
|
Driver
|
|
++++++
|
|
|
|
.. automodule:: artiq.devices.pxi6733.driver
|
|
:members:
|
|
|
|
Controller
|
|
++++++++++
|
|
|
|
Usage example
|
|
|
|
.. argparse::
|
|
:ref: artiq.frontend.pxi6733_controller.get_argparser
|
|
:prog: pxi6733_controller
|
|
|