artiq/examples/transport.py

137 lines
4.9 KiB
Python

import numpy as np
from artiq import *
from artiq.devices import corecom_serial, core, dds_core, rtio_core, pdq2
class Transport(AutoContext):
parameters = ("bd pmt repeats nbins "
"electrodes transport_data wait_at_stop speed"
)
def prepare(self, stop):
t = self.data["t"][:stop]*self.speed
u = self.data["u"][:stop]
# start a new frame, selects possible frame id based on rtio_frame
# assignments from coredev
self.transport = self.electrodes.open_frame()
# interpolates t and u and appends the (t, u) segment to the frame
# adds wait-for-trigger to the first line/spline knot
# will also apply offset and gain calibration data
# stores duration and the fact that this segment needs to be triggered
# both (duration and segment triggering flag) to be retrieved during
# kernel compilation, see transport()
self.transport.append(t, u, trigger=True)
# append the reverse transport (from stop to 0)
# both durations are the same in this case
self.transport.append(t[-1] - t[::-1], u[::-1], trigger=True,
name="from_stop")
# closes the frame with a wait line before jumping back into the jump table
# so that frame signal can be set before the jump
# also mark the frame as closed and prevent further append()ing
self.transport.close()
# packs all in-use frames, distributes them to the sub-devices in
# CompoundPDQ2 and uploads them
# uploading is ARM_DIS, writing, ARM_EN
self.electrodes.prepare()
@kernel
def cool(self):
with parallel:
self.bd.pulse(200*MHz, 1*ms)
self.bdd.pulse(300*MHz, 1*ms)
self.bd.pulse(210*MHz, 100*us)
@kernel
def transport(self):
# ensures no frame is currently being actively played
# set rtio frame select signal to frame id
# rtio trigger jump into transport frame
# (it would be nice if this could be made zero-duration/not advancing the
# timeline by smart scheduling of this frame-select + trigger + minimum wait
# sequence)
self.transport.begin()
# triggers pdqs to start transport frame segment
# plays the transport waveform from 0 to stop
# delay()s the core by the duration of the waveform segment
self.transport.advance()
# leaves the ion in the dark at the transport endpoint
delay(self.wait_at_stop)
# transport back (again: trigger, delay())
# can explicitly reference segment name
# yet segments can only be advance()ed in order
self.transport.advance(name="from_stop")
# ensures all segments have been advanced() through, must leave pdq
# in a state where the next frame can begin()
self.transport.finish()
@kernel
def detect(self):
with parallel:
self.bd.pulse(220*MHz, 100*us)
self.pmt.gate_rising(100*us)
self.bd.on(200*MHz)
self.bdd.on(300*MHz)
return self.pmt.count()
@kernel
def one(self):
self.cool()
self.transport()
return self.detect()
@kernel
def repeat(self):
hist = array(0, self.nbins)
for i in range(self.repeats):
n = self.one()
if n >= self.nbins:
n = self.nbins-1
hist[n] += 1
for i in range(self.nbins):
self.histogram.append(hist[i])
def scan(self, stops):
self.histogram = []
for s in stops:
# non-kernel, calculate waveforms, build frames
# could also be rpc'ed from repeat()
self.prepare(s)
# kernel part
self.repeat()
# live update 2d plot with current self.histogram
# broadcast(s, self.histogram)
if __name__ == "__main__":
# data is usually precomputed offline
data = dict(
t=np.linspace(0, 10, 101), # waveform time
u=np.random.randn(101, 4*3*3), # waveform data,
# 4 devices, 3 board each, 3 dacs each
)
with corecom_serial.CoreCom() as com:
coredev = core.Core(com)
exp = PhotonHistogram(
core=coredev,
bd=dds_core.DDS(core=coredev, dds_sysclk=1*GHz,
reg_channel=0, rtio_channel=1),
pmt=rtio_core.RTIOIn(core=coredev, channel=0),
# a compound pdq device that wraps multiple usb devices (looked up
# by usb "serial number"/id) into one
electrodes=pdq2.CompoundPDQ2(core=coredev,
ids=["qc_q1_{}".format(i) for i in range(4)],
rtio_trigger=3, rtio_frame=(4, 5, 6)),
transport_data=data, # or: json.load
wait_at_stop=100*us,
speed=1.5,
repeats=100,
nbins=100
)
# scan transport endpoint
stop = range(0, len(exp.transport_data["t"]), 10)
exp.scan(stop)