M-Labs
/
artiq
mirror of https://github.com/m-labs/artiq.git
2
0
Fork 2
Code Issues Projects Releases Wiki Activity
8,674 Commits 13 Branches 35 Tags 26 MiB
Commit Graph

345 Commits

Author SHA1 Message Date
whitequark 391660e545 gateware: simplify the CRI arbiter to use a plain mux. 2017-04-05 15:09:19 +00:00
Sebastien Bourdeauducq 12249dac57 rtio: do not clear asynchronous error flags on RTIO reset 2017-04-03 00:20:30 +08:00
Sebastien Bourdeauducq db3118b916 drtio: use BlindTransfer for error reporting 2017-04-03 00:18:07 +08:00
Sebastien Bourdeauducq b74d6fb9ba make collision and busy asynchronous errors, and simplify CPU/gateware handshake for output errors and reads 2017-03-27 16:32:23 +08:00
whitequark 4de336fbe9 gateware: reverse bytes of SDRAM word, not bits. 2017-03-17 11:16:46 +00:00
whitequark 6b63322106 gateware: reverse SDRAM words in RTIO DMA engine. 2017-03-17 07:29:28 +00:00
whitequark 4b14887ddb gateware: work around ISE/Vivado bugs with very wide shifts. 2017-03-17 07:29:28 +00:00
Sebastien Bourdeauducq a7de58b604 rtio: Inout → InOut 2017-03-14 14:18:55 +08:00
Sebastien Bourdeauducq 497c795d8c drtio: input support (untested) 2017-03-13 23:54:44 +08:00
Sebastien Bourdeauducq 1e6a33b586 rtio: handle input timeout in gateware 
The information passed by the runtime will be used by the DRTIO core
to poll the remote side appropriately.
 2017-03-03 17:37:47 +08:00
Sebastien Bourdeauducq d2f2415b50 analyzer: use CRI and connect at RTIO core 
This causes DMA events to be included in analyzer traces.
 2017-03-02 18:47:56 +08:00
Sebastien Bourdeauducq 7d6ebabc1b reorganize core device communication code 2017-02-27 18:37:30 +08:00
Sebastien Bourdeauducq c66efc0279 moninj: do not require a rsys clock domain 2017-02-20 15:52:48 +08:00
Sebastien Bourdeauducq 86f6b391b7 ad9xxx -> ad9_dds 2017-01-04 11:34:52 +01:00
Sebastien Bourdeauducq 6b998581cc rtio: use same reset for counter_rtio whatever the interface delay is 2016-12-15 09:28:13 +08:00
Robert Jördens 8381db279f sawg: wire up all HBF outputs, latency compensation in phys, simplify 2016-12-14 19:16:07 +01:00
Robert Jördens 6cdb96c5e0 rtio: add support for latency compensation in phy 
* if multiple RTIO channels influence the same data stream and physical
output channel (see SAWG) differential latency needs to be compensated
* this is a NOP for phys with zero delay (default)
* if delay==1, it adds one timestamp-wide register
* if delay >1, it adds one adder and one register
* latency compensation using (~10-50 deep) delay lines is about as
expensive as a single adder+register but very tedious to implement
 2016-12-14 19:16:07 +01:00
Robert Jördens c63fa46430 Merge branch 'phaser2' 
* phaser2: (157 commits)
  sawg/hbf: tweak pipeline for timing
  fir: register multiplier output
  conda/phaser: build-depend on numpy
  sawg: reduce coefficient width
  sawg: fix latency
  test/fir: needs mpl. don't run by default
  test/sawg: patch spline
  sawg: use ParallelHBFCascade to AA [WIP]
  fir: add ParallelHBFCascade
  fir: add ParallelFIR and test
  gateware/dsp: add FIR and test
  README_PHASER: update
  sawg: documentation
  sawg: extract spline
  sawg: document
  sawg: demo_2tone
  sawg: round to int64
  gateware/phaser -> gateware/ad9154_fmc_ebz
  phaser: fix typo
  sawg: merge set/set64
  ...
 2016-12-12 17:31:39 +01:00
Sebastien Bourdeauducq 7196bc21c1 rtio: simplify error reset logic 
Channel is always selected when reset is issued.
 2016-12-12 17:35:10 +08:00
Sebastien Bourdeauducq bc36bda94a perform RTIO init on comms CPU side 2016-12-09 14:16:55 +08:00
Sebastien Bourdeauducq f3c50a37ca rtio: always read full DMA sequence 2016-12-06 01:05:47 +08:00
Sebastien Bourdeauducq c413d95b49 rtio: fix DMA get_csrs 2016-12-05 18:12:09 +08:00
Sebastien Bourdeauducq b677c69faf rtio: fix handling of o_status in DMA 2016-12-05 18:01:48 +08:00
Sebastien Bourdeauducq 75ea13748a rtio: fix DMA data MSB and stop signaling, self-checking unittest 2016-12-05 18:01:48 +08:00
Sebastien Bourdeauducq a5834765d0 rtio: more DMA fixes, better stopping mechanism 2016-12-05 18:01:48 +08:00
Sebastien Bourdeauducq 30bce5ad35 rtio: DMA fixes 2016-12-05 18:01:48 +08:00
Sebastien Bourdeauducq 88ad054ab6 Merge branch 'drtio' 2016-12-03 23:25:17 +08:00
Sebastien Bourdeauducq 3931d8097b rtio: fix DMA TimeOffset stream.connect 2016-12-01 16:43:46 +08:00
Sebastien Bourdeauducq 7c59688a12 rtio: simple DMA fixes 2016-12-01 16:30:48 +08:00
Sebastien Bourdeauducq 46dbc44c8f rtio: export DMA and CRIInterconnectShared 2016-12-01 16:30:29 +08:00
Sebastien Bourdeauducq 6c97a97d8c rtio: support single-master CRI arbiter 2016-12-01 16:30:11 +08:00
Sebastien Bourdeauducq a318243083 rtio: CRI arbiter (untested) 2016-12-01 15:41:43 +08:00
Sebastien Bourdeauducq cd3f68ba76 rtio: DMA core (untested) 2016-11-30 18:43:19 +08:00
Sebastien Bourdeauducq 85f2467e2c rtio: fix RTIO/DRTIO timestamp resolution discrepancy 2016-11-28 15:01:46 +08:00
Sebastien Bourdeauducq 5460202220 drtio: typo 2016-11-28 14:35:21 +08:00
Sebastien Bourdeauducq 4e1b497742 drtio: typo 2016-11-28 14:34:58 +08:00
Sebastien Bourdeauducq c419c422fa drtio: support for local RTIO core 2016-11-28 14:33:26 +08:00
Robert Jördens 1c84d1ee59 Merge branch 'master' into phaser2 
* master:
  rtio: support differential ttl
  RELEASE_NOTES: int(a, width=b) removal, use int32/64
  pc_rpc: use ProactorEventLoop on Windows (#627)
 2016-11-24 15:05:49 +01:00
Robert Jördens 95c885b580 rtio: support differential ttl 2016-11-24 15:04:12 +01:00
Sebastien Bourdeauducq 2d62a89143 rtio: use large data register 2016-11-23 23:23:27 +08:00
Sebastien Bourdeauducq 9941f3557d rtio: use only CRI commands for rio/rio_phy resets 2016-11-23 23:19:14 +08:00
Robert Jördens 347609d765 rtio: auto clear output event data and address 
This is to support channels where variable length
event data is well-defined through zero-padding.
E.g. in the case of `Spline` zero-padding of events naturally
corresponds to low-order knots.

Use timestamp change as trigger. This assumes that writes to the
timestamp register always precede address and data writes.
It does not break support for ganged writes of the same event
timestamp and data/address to multiple channels or
channel-addresses.
 2016-11-23 15:03:36 +01:00
Sebastien Bourdeauducq d400c81cb2 rtio: remove debug print 2016-11-23 13:37:14 +08:00
Sebastien Bourdeauducq 4e931c7dd2 rtio: fix timestamp shift 2016-11-23 13:36:30 +08:00
Sebastien Bourdeauducq ffefdb9269 rtio: fix counter readback 2016-11-23 00:54:47 +08:00
Sebastien Bourdeauducq aa00627c0e rtio: fix CRI CSRs 2016-11-22 22:57:04 +08:00
Sebastien Bourdeauducq 9acc7d135e gateware: common RTIO interface 2016-11-22 22:46:50 +08:00
Sebastien Bourdeauducq 3459793586 Merge branch 'master' into drtio 2016-11-22 15:15:22 +08:00
Robert Jördens 4160490e0a Merge branch 'phaser' into phaser2 
* phaser: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
 2016-11-21 17:29:46 +01:00
Robert Jördens f7e8961ab0 Merge branch 'master' into phaser 
* master: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
 2016-11-21 17:29:39 +01:00
whitequark 5e8888d5f3 Fully drop AD9858 and kc705-nist_qc1 support (closes #576). 2016-11-21 15:14:17 +00:00
Robert Jördens 97a54046e8 rtio: auto clear output event data and address 
This is to support channels where variable length
event data is well-defined through zero-padding.
E.g. in the case of `Spline` zero-padding of events naturally
corresponds to low-order knots.

Use timestamp change as trigger. This assumes that writes to the
timestamp register always precede address and data writes.
It does not break support for ganged writes of the same event
timestamp and data/address to multiple channels or
channel-addresses.
 2016-11-19 16:12:27 +01:00
Robert Jördens bcde26f990 Revert "phaser: cap phy data width to 64 temporarily" 
This reverts commit 342b9e977e.
 2016-11-18 17:08:44 +01:00
Robert Jördens 342b9e977e phaser: cap phy data width to 64 temporarily 2016-11-18 15:46:59 +01:00
Robert Jördens d678bb3fb6 phaser: update sawg tests 2016-11-18 15:23:56 +01:00
Robert Jördens b9ce2bb1f0 Merge branch 'phaser' into phaser2 
* phaser: (127 commits)
  phaser: use misoc cordic
  phaser: fix DDS dummy cfg
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  ...
 2016-11-13 17:30:37 +01:00
Robert Jördens aedb6747f2 Merge branch 'master' into phaser 
* master: (47 commits)
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
  Revert "Revert "Revert "Update for LLVM 3.9."""
  ...
 2016-11-13 16:54:28 +01:00
Sebastien Bourdeauducq 0c1a76d668 unify rtio/drtio kernel interface 2016-11-01 00:30:16 +08:00
Sebastien Bourdeauducq 9aa94e1a2d adapt to migen/misoc changes 2016-10-31 00:53:01 +08:00
Sebastien Bourdeauducq ed4d57c638 use new Migen signal attribute API 2016-10-29 21:19:58 +08:00
Robert Jördens ea0c304a0c phaser2: wip 2016-10-27 01:00:42 +02:00
Sebastien Bourdeauducq 449d1c4dc6 rtio: export CDC modules 2016-10-22 13:03:10 +08:00
Robert Jördens f5f7acc1f8 ttl_simple: add pure Input 
(no Tristate for internal signals)
 2016-10-10 17:13:23 +02:00
Robert Jördens 4a0eaf0f95 phaser: add jesd204b rtio dds 
gateware: add jesd204b awg

gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce

sawg: kernel support and docs

sawg: coredevice api fixes

sawg: example ddb/experiment

phaser: add conda package

examples/phaser: typo

sawg: adapt tests, fix accu stb

sawg: tweak dds parameters

sawg: move/adapt/extend tests

sawg: test phy, refactor

phaser: non-rtio spi

phaser: target cli update

phaser: ad9154-fmc-ebz pins

phaser: reorganize fmc signal naming

phaser: add test mode stubs

phaser: txen is LVTTL

phaser: clk spi xfer test

phaser: spi for ad9154 and ad9516

phaser: spi tweaks

ad9154: add register map from ad9144.xml

ad9516: add register map from ad9517.xml and manual adaptation

ad9154_reg: just generate getter/setter macros as well

ad9154: reg WIP

ad9154: check and fix registers

kc705: single ended rtio_external_clk

use single ended user_sma_clk_n instead of p/n to free up one clock sma

kc705: mirror clk200 at user_sma_clock_p

ad9516_regs.h: fix B_COUNTER_MSB

phase: wire up clocking differently

needs patched misoc

kc705: feed rtio_external_clock directly

kc705: remove rtio_external_clk for phaser

phaser: spi tweaks

ad9516: some startup

ad9516_reg fixes

phaser: setup ad9516 for supposed 500 MHz operation

ad9516: use full duplex spi

ad9154_reg: add CONFIG_REG_2

ad9154_reg: fixes

phaser: write some ad9154 config

ad9154_reg: fixes

ad9154: more init, and human readable setup

ad9154/ad9516: merge spi support

ad9154: status readout

Revert "kc705: remove rtio_external_clk for phaser"

This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.

Revert "kc705: feed rtio_external_clock directly"

This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.

Revert "phase: wire up clocking differently"

This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.

Revert "kc705: mirror clk200 at user_sma_clock_p"

This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.

Revert "kc705: single ended rtio_external_clk"

This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.

ad9516: 2000 MHz clock

phaser: test clock dist

phaser: test freqs

ad9154: iostandards

phaser: drop clock monitor

phaser: no separate i2c

phaser: drive rtio from refclk, wire up sysref

phaser: ttl channel for sync

ad9154: 4x interp, status, tweaks

phaser: sync/sysref 33V banks

phaser: sync/sysref LVDS_25 inputs are VCCO tolerant

phaser: user input-only ttls

phaser: rtio fully from refclk

ad9154: reg name usage fix

ad9154: check register modifications

Revert "ad9154: check register modifications"

This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.

ad9154: fix status code

ad9154: addrinc, recal serdes pll

phaser: coredevice, example tweaks

sawg: missing import

sawg: type fixes

ad9514: move setup functions

ad9154: msb first also decreasing addr

phaser: use sys4x for rtio internal ref

phaser: move init code to main

phaser: naming cleanup

phaser: cleanup pins

phaser: move spi to kernel cpu

phaser: kernel support for ad9154 spi

ad9154: add r/w methods

ad9154: need return annotations

ad9154: r/w methods are kernels

ad9154_reg: portable helpers

phaser: cleanup startup kernel

ad9154: status test

ad9154: prbs test

ad9154: move setup, document

phaser: more documentation
 2016-10-05 16:17:50 +02:00
Robert Jördens a91ed8394c rtio: add input-only channel 2016-10-05 16:17:50 +02:00
Robert Jördens 279f0d568d rtio: support differential ttl 2016-10-05 16:17:50 +02:00
Sebastien Bourdeauducq a7dd356d30 rtio/phy/ttl: support 'set sensitivity and sample' command (#218) 2016-09-07 15:42:09 +08:00
Sebastien Bourdeauducq 7a2405146a rtio: do not reset DDS and SPI PHYs on RTIO reset (#503) 2016-07-09 10:07:19 +08:00
Sebastien Bourdeauducq 900b0cc629 analyzer: make byte_count 64-bit 2016-03-19 19:40:23 +08:00
Sebastien Bourdeauducq 1bbef94061 analyzer: fix byte_count (again) 2016-03-15 20:49:07 +08:00
Sebastien Bourdeauducq 85ea70a664 analyzer: fix byte_count 2016-03-15 20:33:08 +08:00
Sebastien Bourdeauducq 62ac4e3c2e analyzer: fix EOP generation 2016-03-15 20:25:02 +08:00
Sebastien Bourdeauducq b5ec979db3 analyzer: drive wishbone cyc signal 2016-03-15 19:46:12 +08:00
Sebastien Bourdeauducq 8a6873cab2 analyzer: use EOP, flush pipeline on stop 2016-03-15 17:49:59 +08:00
Florent Kermarrec 8ad799a850 gateware/rtio/analyzer: use new Converter 2016-03-14 15:15:07 +01:00
Sebastien Bourdeauducq de718fc819 rtio: fix different address collision detection 2016-03-10 12:15:36 +08:00
Sebastien Bourdeauducq f4f95d330b Merge branch 'master' of github.com:m-labs/artiq 2016-03-10 11:15:30 +08:00
Sebastien Bourdeauducq 542a375305 rtio: remove NOP suppression capability 
Back when RTIO was driving TTLs, this functionality made it simpler to use by removing some irrelevant underflows.

The same technique is not applicable to DDS and SPI, so the user will have to deal with such underflows.

This patch makes the behavior of RTIO more consistent and the code simpler.
 2016-03-10 09:47:29 +08:00
Sebastien Bourdeauducq 2e39802a61 rtio/wishbone: make replace configurable 2016-03-10 09:44:05 +08:00
Robert Jördens 107e5cfbd4 gateware/rtio: factor _BlindTransfer 2016-03-09 19:07:46 +01:00
Robert Jördens 349a66124b Merge branch 'master' into rtiobusy 
* master:
  coredevice: fix _DDSGeneric __init__ args
  rtio/core: fix syntax
  rtio: disable replace on rt2wb channels
  examples: dds_bus -> core_dds
  fix more multi-DDS-bus problems
  runtime: fix dds declarations
  support for multiple DDS buses (untested)
 2016-03-09 17:58:58 +01:00
Robert Jördens 3f8e431de6 rtio/core: fix syntax 2016-03-09 17:10:21 +01:00
Sebastien Bourdeauducq 03b53c3af9 rtio: disable replace on rt2wb channels 2016-03-09 23:37:04 +08:00
Robert Jördens 2cb58592ff rtio: add RTIOBusy 2016-03-08 18:04:34 +01:00
Sebastien Bourdeauducq 2953b069dc rtio: when rtlink addresses are different, issue collision not replace (fixes #320) 2016-03-08 15:58:25 +08:00
Sebastien Bourdeauducq 71105fd0d7 rtio: collision_error -> collision 2016-03-08 15:38:35 +08:00
Robert Jördens a0083f4501 Revert "gateware/rt2wb: only input when active" 
This reverts commit 1b08e65fa1.
 2016-02-29 16:44:11 +01:00
Robert Jördens cb8815cc65 Revert "gateware/rt2wb: support combinatorial ack" 
This reverts commit f73228f248.
 2016-02-29 16:44:04 +01:00
Robert Jördens f73228f248 gateware/rt2wb: support combinatorial ack 2016-02-29 15:40:55 +01:00
Robert Jördens 1b08e65fa1 gateware/rt2wb: only input when active 2016-02-29 14:56:29 +01:00
Robert Jördens f8732acece rtio.spi: drop unused argument 2016-02-28 21:06:20 +01:00
Robert Jördens e7146cc999 gateware.spi: design sketch 2016-02-26 17:03:08 +01:00
Robert Jördens 68891493a3 analyzer: move common to artiq.protocols 
migen was still pulled in through rtio.__init__.py
 2016-01-29 20:26:48 -07:00
Robert Jördens cbb60337ae refactor Analyzer constants to unlink dependencies 2016-01-25 18:03:48 -07:00
Sebastien Bourdeauducq 080752092c gateware/rtio: add LogChannel 2015-12-26 22:43:28 +08:00
Sebastien Bourdeauducq 9ba8dfbf23 gateware/rtio/core: avoid potential python bug 2015-12-26 22:11:57 +08:00
Sebastien Bourdeauducq 8691f69a3c gateware/rtio/analyzer: suppress spurious initial reset messages 2015-12-21 18:32:08 +08:00
Sebastien Bourdeauducq 5769107936 gateware/rtio: keep counter clock domain transfer active during CSR reset 2015-12-20 22:12:34 +08:00
Sebastien Bourdeauducq 46f59b673f coredevice: analyzer message decoding 2015-12-20 14:34:16 +08:00
Sebastien Bourdeauducq 1638f0fa9b gateware/rtio/analyzer: fix event ordering 2015-12-19 17:04:30 +08:00
Sebastien Bourdeauducq 64ad38854b gateware/rtio/analyzer: fix exception message layout 2015-12-18 18:27:06 +08:00
Sebastien Bourdeauducq 59a3ea4f15 gateware/rtio/analyzer: fix bus write 2015-12-18 15:44:20 +08:00
Sebastien Bourdeauducq afaad270cc rtio/analyzer: fix superficial mistakes 2015-12-16 17:36:36 +08:00
Sebastien Bourdeauducq 4362f97d67 gateware/rtio/analyzer: complete, untested 2015-12-14 23:53:14 +08:00
Sebastien Bourdeauducq b5f2e178f6 rtio/analyzer: message encoder 2015-12-14 00:37:08 +08:00
Sebastien Bourdeauducq e26147b2ac gateware,runtime: use new migen/misoc 2015-11-04 00:35:03 +08:00
Sebastien Bourdeauducq e46ba83513 rtio/dds: use rio_phy domain to reset FTW tracker. Closes #120 2015-10-04 22:53:51 +08:00
Robert Jördens 01416bb0be copyright: claim contributions 
These are contributions of >= 30% or >= 20 lines (half-automated).

I hereby resubmit all my previous contributions to the ARTIQ project
under the following terms:

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Closes #130

Signed-off-by: Robert Jordens <jordens@gmail.com>
 2015-09-06 16:08:57 -06:00
Sebastien Bourdeauducq 90ce54d8d5 gateware/dds/monitor: support onehot selection, strip reset 2015-08-27 15:54:01 +08:00
Sebastien Bourdeauducq 1d34c06d79 rtio: detect collision errors 2015-07-29 19:43:35 +08:00
Robert Jördens fb339d294e serdes_s6: no need to reset 2015-07-28 12:54:31 -06:00
Robert Jördens 9ac5bc52d4 rtio: add spartan6 serdes, 4x and 8x 2015-07-27 21:01:15 -06:00
Sebastien Bourdeauducq b1d58bd4c8 rtio: fix replace/sequence_error when fine_ts_width > 0 2015-07-27 12:22:35 +08:00
Sebastien Bourdeauducq 959b7a7b46 rtio: resetless -> reset_less 2015-07-27 11:46:56 +08:00
Sebastien Bourdeauducq fe6a5c42df rtio: remove unused clk_freq argument 2015-07-27 10:57:15 +08:00
Sebastien Bourdeauducq 5b50f5fe05 rtio/ttl_serdes_7series: use recommended OSERDES T configuration 2015-07-27 10:50:50 +08:00
Sebastien Bourdeauducq f68d5cbd73 rtio: forward rtio domain reset to rio and rio_phy domains 2015-07-27 01:52:47 +08:00
Sebastien Bourdeauducq 940aa815dd rtio/ttl_serdes: cleanup/rewrite 2015-07-27 01:44:52 +08:00
Yann Sionneau d90dff4ef1 rtio: add SERDES TTL (WIP) 2015-07-26 17:40:34 +08:00
Robert Jördens 47191eda91 dds monitor: relax timing (for pipistrello) 2015-07-19 21:36:51 -06:00
Sebastien Bourdeauducq 66940ea815 rtio: disable NOP suppression after reset and underflow 2015-07-15 20:54:55 +02:00
Sebastien Bourdeauducq 8a33d8c868 never stop RTIO counter 2015-07-07 15:29:38 +02:00
Sebastien Bourdeauducq 58c0150822 ttl: improve clockgen doc 2015-07-05 19:07:13 +02:00
Sebastien Bourdeauducq 753d61b38f complete support for TTL clock generator 2015-07-04 18:36:01 +02:00
Sebastien Bourdeauducq 2881d5f00a gateware: add RTIO clock generator 2015-07-02 18:20:26 +02:00
Sebastien Bourdeauducq 944bfafefa soc: support QC2 and AD9914 (untested) 2015-06-28 21:37:27 +02:00
Sebastien Bourdeauducq f47c2e54e1 DDS monitor fixes 2015-06-19 17:36:46 -06:00
Sebastien Bourdeauducq 5a9bdb2e33 DDS monitoring 2015-06-19 15:30:17 -06:00
Sebastien Bourdeauducq b2af0f6cc3 soc,runtime: support TTL override 2015-06-09 19:51:02 +08:00
Sebastien Bourdeauducq a2ae5e4706 runtime: report TTL status over UDP 2015-06-03 18:26:19 +08:00
Sebastien Bourdeauducq b81151eb42 soc: rtio monitor 2015-06-02 17:41:40 +08:00
Sebastien Bourdeauducq a36c51eb83 DDS over RTIO (batch mode not supported yet) 2015-05-08 14:44:39 +08:00
Sebastien Bourdeauducq cb65b1e322 rtio/phy/ttl_simple: reset sensitivity with RTIO logic 2015-05-02 16:17:31 +08:00
Sebastien Bourdeauducq a61d701d47 rtio: decouple PHY reset from logic reset 2015-05-02 11:47:11 +08:00
Sebastien Bourdeauducq 27d94a22de rtio: expose full_ts_width instead of counter_width parameter 2015-04-28 01:38:11 +08:00
Sebastien Bourdeauducq 546996f896 coredevice,runtime: put ref_period into the ddb 2015-04-16 15:15:38 +08:00
Sebastien Bourdeauducq 71167b8adf rtio: do not attempt latency compensation in gateware 2015-04-16 13:09:29 +08:00
Sebastien Bourdeauducq 6215d63491 rtio: do not create spurious CSRs when data_width/address_width is 0 2015-04-16 13:04:19 +08:00
Sebastien Bourdeauducq 26003781b4 rtio/rtlink: add 'like' methods to clone interfaces 2015-04-16 13:02:39 +08:00
Sebastien Bourdeauducq 30dffb6644 rtio/phy: add wishbone adapter 2015-04-15 20:39:40 +08:00
Sebastien Bourdeauducq 4c10182c9f rtio: refactor, use rtlink 2015-04-14 19:44:45 +08:00
Sebastien Bourdeauducq ff9a7727d2 rtio: add rtlink definition (currently unused) 2015-04-13 22:19:18 +08:00
Florent Kermarrec 2995f0a705 remove use of _r prefix on CSRs 2015-04-02 18:30:44 +08:00
Sebastien Bourdeauducq 3122623c6f rtio: make 63-bit timestamp counter the default [soc] 2015-03-12 13:13:35 +01:00
Sebastien Bourdeauducq 28bce9ee40 artiqlib -> artiq.gateware 2015-03-08 11:00:24 +01:00