M-Labs
/
artiq
mirror of https://github.com/m-labs/artiq.git
2
0
Fork 2
Code Issues Projects Releases Wiki Activity
8,674 Commits 13 Branches 35 Tags 26 MiB
Commit Graph

345 Commits

Author SHA1 Message Date
Robert Jördens 3e99f1ce5a phaser: refactor link 2020-08-22 11:56:23 +00:00
Robert Jördens a34a647ec4 phaser: refactor fastlink 2020-08-22 11:56:23 +00:00
Robert Jördens aa0154d8e2 phaser: initial 2020-08-22 11:56:23 +00:00
Sebastien Bourdeauducq 504f72a02c rtio: remove legacy i_overflow_reset CSR 2020-08-06 17:52:32 +08:00
Sebastien Bourdeauducq 4340a5cfc1 rtio/dma: fix previous commit 2020-07-12 10:14:22 +08:00
Sebastien Bourdeauducq f2e0d27334 rtio/dma: remove dead/broken code 2020-07-12 10:13:18 +08:00
Sebastien Bourdeauducq 3a7819704a rtio: support direct 64-bit now CSR in KernelInitiator 2020-04-26 16:04:32 +08:00
Robert Jördens ea79ba4622 ttl_serdes: detect edges on short pulses 
Edges on pulses shorter than the RTIO period were missed because the
reference sample and the last sample of the serdes word are the same.

This change enables detection of edges on pulses as short as the
serdes UI (and shorter as long as the pulse still hits a serdes sample
aperture).

In any RTIO period, only the leading event corresponding to the first
edge with slope according to sensitivity is registerd. If the channel is
sensitive to both rising and falling edges and if the pulse is contained
within an RTIO period, or if it is sensitive only to one edge slope and
there are multiple pulses in an RTIO period, only the leading event is
seen. Thus this possibility of lost events is still there. Only the
conditions under which loss occurs are reduced.

In testing with the kasli-ptb6 variant, this also improves resource
usage (a couple hundred LUT) and timing (0.1 ns WNS).
 2020-04-13 13:21:03 +02:00
Robert Jördens e803830b3b fastino: support wide RTIO interface and channel groups 2020-03-05 17:55:04 +00:00
Robert Jördens 2c4e5bfee4 fastino: add [WIP] 2020-01-20 13:25:00 +01:00
Sebastien Bourdeauducq 6c948c7726 sayma: RF switch control is active-low on Basemod, invert 2020-01-16 08:59:52 +08:00
Sebastien Bourdeauducq 37d0a5dc19 rtio/ttl: expose OE 2019-10-16 18:48:20 +08:00
Sebastien Bourdeauducq bc060b7f01 style 2019-10-16 18:18:11 +08:00
Robert Jördens f0e87d2e59 grabber: remove unused code 2019-09-20 15:26:12 +02:00
Sebastien Bourdeauducq f8dba7ae35 rtio: use BlindTransfer from Migen 2019-07-05 18:46:18 +08:00
David Nadlinger 0353966ef7 gateware/suservo: Sign-extend data on RTIO read-back 
See GitHub #1327 for original patch by Brad Bondurant.
 2019-06-14 23:46:16 +01:00
hartytp cfe1f56f73
suservo: add some more comments to the RTServoMem to clarify the RTIO interface (#1323) 2019-05-17 16:12:35 +01:00
Sebastien Bourdeauducq 3e8fe3f29d suservo: fix permissions 2019-02-08 14:54:02 +08:00
hartytp 87e85bcc14 suservo: fix coefficient data writing 
Signed-off-by: Thomas Harty <thomas.harty@physics.ox.ac.uk>
 2019-02-07 14:47:11 +01:00
David Nadlinger a565f77538 Add gateware input event counter 2019-01-15 10:55:07 +00:00
Sebastien Bourdeauducq cf9447ab77 rtio/cri: remove unneeded CSR management 2019-01-05 23:40:45 +08:00
Sebastien Bourdeauducq 0972d61e81 ttl_serdes_ultrascale: use GTH clock domains 2019-01-03 20:50:04 +08:00
Sebastien Bourdeauducq 4af8fd6a0d ttl_serdes_ultrascale: fix Input 2019-01-03 20:14:54 +08:00
Sebastien Bourdeauducq 7e14f3ca4e compiler,gateware: atomic now stores 2018-12-02 05:06:46 +08:00
Sebastien Bourdeauducq c56c0ba41f rtio/dds: use write-only RT2WB 
This saves one address bit and prevents issues with AD9914 and 8-bit addresses.
 2018-11-26 07:38:15 +08:00
Sebastien Bourdeauducq 09141e5bee rtio/wishbone: support write-only interface 2018-11-26 07:38:06 +08:00
Sebastien Bourdeauducq 450a035f9e suservo: move overflowing RTIO address bits into data 2018-11-26 06:54:20 +08:00
Sebastien Bourdeauducq ae8ef18f47 rtlink: sanity-check parameters 2018-11-26 01:14:02 +08:00
Sebastien Bourdeauducq 8caea0e6d3 gateware,runtime: optimize RTIO kernel interface further 
* now pinning (TODO: atomicity)
* for inputs, merge request and timeout registers
 2018-11-08 18:29:24 +08:00
Sebastien Bourdeauducq aadf5112b7 rtio: remove incorrect comment 2018-11-08 00:02:44 +08:00
Sebastien Bourdeauducq 3d0c3cc1cf gateware,runtime: optimize RTIO output interface 
* reduce address to 8 bits
* merge core, channel and address into 32-bit pre-computable "target"
* merge we register into data register
 2018-11-07 23:39:58 +08:00
Sebastien Bourdeauducq ad0254c17b Merge branch 'switching125' into new 2018-11-07 22:03:18 +08:00
Sebastien Bourdeauducq 48a142ed63 use FutureWarning instead of DeprecationWarning 
DeprecationWarning is disabled by default and too easy to ignore.
 2018-10-21 12:14:51 +08:00
Sebastien Bourdeauducq d38755feff drtio: implement destination state checks on operations 2018-09-15 15:55:45 +08:00
Sebastien Bourdeauducq 420e1cb1d0 cri: fix firmware routing table access 2018-09-12 18:08:16 +08:00
Sebastien Bourdeauducq 5bcd40ff59 cri: fix routing table depth 2018-09-12 17:30:55 +08:00
Sebastien Bourdeauducq d5577ec0d0 cri: add routing table support 2018-09-09 16:26:48 +08:00
Sebastien Bourdeauducq 92be9324df add missing files 2018-09-05 16:09:02 +08:00
Sebastien Bourdeauducq 4e4398afa6 analyzer: adapt to TSC changes 2018-09-05 12:06:20 +08:00
Sebastien Bourdeauducq f3fe818049 rtio: refactor TSC to allow sharing between cores 2018-09-03 09:48:12 +08:00
Sebastien Bourdeauducq 0fe2a6801e drtio: forward destination with channel 2018-09-02 15:50:23 +08:00
Sebastien Bourdeauducq aa64e6c1c6 cri: add buffer space request protocol 2018-08-29 15:16:43 +08:00
Sebastien Bourdeauducq 60a7e0e40d grabber: use usual order of ROI coordinates in cfg addresses 2018-07-24 10:55:13 +08:00
Sebastien Bourdeauducq 7b75026391 grabber: add MultiReg to transfer ROI boundaries 2018-07-21 13:40:12 +08:00
Sebastien Bourdeauducq 031de58d21 grabber: complete RTIO PHY, untested 2018-07-21 13:25:47 +08:00
Sebastien Bourdeauducq 82def6b535 grabber: add frequency counter 
Cameras are a bit obscure about what they output, this can help with troubleshooting.
 2018-07-12 17:05:18 +08:00
Sebastien Bourdeauducq 4f56710e4b grabber: add parser, report detected frame size in core device log 2018-07-10 02:06:37 +08:00
Sebastien Bourdeauducq 9142a5ab8a rtio: expose coarse timestamp in RTIO and DRTIO satellite cores 2018-06-20 17:39:54 +08:00
Sebastien Bourdeauducq 2612fd1e72 rtio: add grabber deserializer and WIP PHY encapsulation 2018-05-28 22:42:27 +08:00
Sebastien Bourdeauducq 3027951dd8 integrate new AD9914 driver 
moninj, analyzer, docs, examples, tests.
 2018-05-13 23:29:35 +08:00
Robert Jördens f055bf88f6 suservo: add clip flags (#992) 2018-05-09 07:16:15 +00:00
Sebastien Bourdeauducq 4120105e3a rtio/sed: fix output network cmp_wrap 2018-05-02 12:04:03 +08:00
Sebastien Bourdeauducq 83fb431cd0 rtio/sed: pass sequence numbers through the FIFOs. Closes #978 2018-05-02 10:57:57 +08:00
Robert Jördens 5f00326c65 suservo: coeff mem write port READ_FIRST 2018-04-27 15:43:32 +00:00
Robert Jördens 307cd07b9d suservo: lots of gateware/ runtime changes 
tested/validated:

* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback

individual changes below:

suservo: correct rtio readback

suservo: example, device_db [wip]

suservo: change rtio channel layout

suservo: mem ports in rio domain

suservo: sck clocked from rio_phy

suservo: cleanup, straighten out timing

suservo: dds cs polarity

suservo: simplify pipeline

suservo: drop unused eem names

suservo: decouple adc SR from IIR

suservo: expand coredevice layer

suservo: start the correct stage

suservo: actually load ctrl

suservo: refactor/tweak adc timing

suservo: implement cpld and dds init
 2018-04-27 13:50:26 +02:00
Robert Jördens c83305065a suservo: add servo/config/status register 2018-04-25 15:59:06 +00:00
Robert Jördens fe75064c1e suservo: cleanup rtio interface 2018-04-24 13:08:40 +00:00
Robert Jördens 99dd9c7a2a suservo: fix rtio interface width 2018-04-23 18:30:18 +00:00
Robert Jördens 934c41b90a gateware: add suservo 
from
fe4b60b902

m-labs/artiq#788
 2018-04-23 18:24:59 +00:00
Sebastien Bourdeauducq f0771765c1 rtio: move CRI write comment to more appropriate location 2018-03-29 23:55:00 +08:00
Robert Jördens 3a0dfb7fdc ad53xx: port monitor, moninj dashboard, kc705 target 2018-03-24 16:04:02 +01:00
Robert Jördens 1553fc8c7d sed: reset `valid` in output sorter 2018-03-23 11:11:11 +00:00
Sebastien Bourdeauducq f8c2d54e75 ttl_serdes_ultrascale: configurable SERDES ratio. Also try X4 on Sayma 2018-03-21 13:01:38 +08:00
Sebastien Bourdeauducq c8020f6bbd ttl_serdes_generic: fix/upgrade test 2018-03-20 16:46:57 +08:00
Sebastien Bourdeauducq a5825184b7 add ttl_serdes_ultrascale (untested) 2018-03-20 16:07:23 +08:00
Sebastien Bourdeauducq fad066f1aa ttl_serdes_7series: cleanup indentation 
Inconsistent with other code and confuses text editors.
 2018-03-20 15:50:04 +08:00
Sebastien Bourdeauducq a315ecd10b rtio/ttl_serdes_7series: reset IOSERDES (#958) 2018-03-14 09:01:29 +08:00
Chris Ballance 6dfebd54dd ttl_serdes_7series: use correct IBUFDS_INTERMDISABLE port names 2018-03-12 10:37:33 +08:00
Robert Jördens 3a6566f949 rtio: judicious spray with reset_less=True 
Hoping to reduce rst routing difficulty and easier RTIO timing closure.
 2018-03-07 14:57:18 +00:00
Robert Jördens b0282fa855 spi2: reset configuration in rio_phy 2018-03-07 14:42:11 +00:00
Robert Jördens 4af7600b2d Revert "LaneDistributor: try equivalent spread logic" 
This reverts commit 8b70db5f17.

Just a shot into the dark.
 2018-03-07 11:34:51 +00:00
Robert Jördens a6d1b030c1 RTIO: use TS counter in the correct CD 
artiq/m-labs#938
 2018-03-07 11:34:42 +00:00
Robert Jördens 8b70db5f17 LaneDistributor: try equivalent spread logic 2018-03-07 11:34:42 +00:00
Robert Jördens 2cbd597416 LaneDistributor: style and signal consolidation [NFC] 2018-03-07 11:34:42 +00:00
Robert Jördens 50298a6104 ttl_serdes_7series: suppress diff_term in outputs 2018-03-06 14:27:19 +01:00
Robert Jördens e356150ac4 ttl_simple: support differential io 2018-03-06 14:27:19 +01:00
Sebastien Bourdeauducq c25560baec sed: more LaneDistributor comments 2018-03-06 20:56:35 +08:00
Sebastien Bourdeauducq f40255c968 sed: add comments about key points in LaneDistributor 2018-03-06 20:51:09 +08:00
Sebastien Bourdeauducq 928d5dc9b3 drtio: raise RTIOLinkError if operation fails due to link lost (#942) 2018-03-04 01:02:53 +08:00
Robert Jördens cc70578f1f remove old spi RTIO Phy 2018-03-01 11:19:18 +01:00
Robert Jördens f8e6b4f4e3 ad5360: port to spi2 
* kc705 nist_clock target gateware
* coredevice driver
* moninj code
* test/example/device_db

This is untested as we don't have a AD5360 board right now.
Will be tested with Zotino v1.1

m-labs/artiq#926
 2018-02-22 10:25:46 +01:00
Robert Jördens 37a0d6580b spi2: add RTIO gateware and coredevice driver 
1006218997
 2018-02-21 13:37:36 +00:00
Robert Jördens 7a1d71502a ttl_serdes_7series: drive IBUF and INTERM disables from serdes 2018-02-21 13:37:29 +00:00
Robert Jördens 476e4fdd56 ttl_serdes_7series: disable IBUF and INTERM when output 2018-02-21 13:37:29 +00:00
Sebastien Bourdeauducq ab5f397fea sed/fifos: use AsyncFIFOBuffered 
(D)RTIO now passes timing at 150MHz on Kasli.
 2018-02-13 20:02:51 +08:00
Sebastien Bourdeauducq dc593ec0f0 Merge branch 'rtio-sed' into sed-merge 2018-01-10 12:04:54 +08:00
Robert Jördens 6d20b71dde ttl_serdes_7series: refactor IOSERDES 2018-01-02 13:20:47 +01:00
Sebastien Bourdeauducq d5b5076f67 gateware/ad5360_monitor: fix SPI data decoding 2017-10-26 11:58:59 +08:00
Sebastien Bourdeauducq 412548a86c gateware: add AD5360 monitor (untested) 2017-10-23 20:09:28 +08:00
Sebastien Bourdeauducq 4fa823b62a gateware: add support for SPI-over-LVDS 2017-10-23 15:04:01 +08:00
Sebastien Bourdeauducq 5f083f21a4 rtio/dma: fix signal width 2017-10-08 22:37:46 +08:00
Sebastien Bourdeauducq 6c049ad40c rtio: report channel numbers in asynchronous errors 2017-09-29 16:32:57 +08:00
Sebastien Bourdeauducq 5437f0e3e3 rtio: make sequence errors consistently asychronous 2017-09-29 14:40:06 +08:00
Sebastien Bourdeauducq d7ef07a0c2 rtio/sed: document architecture 2017-09-26 16:44:23 +08:00
Sebastien Bourdeauducq 9905b8723b rtio/sed: support negative latency compensation 2017-09-26 16:11:08 +08:00
Sebastien Bourdeauducq 4112e403de rtio/sed: latency compensation 2017-09-26 15:09:07 +08:00
Sebastien Bourdeauducq aa8fc81a87 rtio: allow specifying glbl_fine_ts_width externally 2017-09-23 22:34:55 +08:00
Sebastien Bourdeauducq 5cf0693758 rtio: use BlindTransfer to report collision and busy errors to sys domain 2017-09-21 22:31:56 +08:00
Sebastien Bourdeauducq d74a7d272e rtio: fix/cleanup parameters 2017-09-21 15:59:48 +08:00
Sebastien Bourdeauducq 07d3f87c51 rtio/sed: min_space → buffer_space 2017-09-21 14:36:13 +08:00