Sebastien Bourdeauducq
6861d3ab33
remove WRPLL
2021-02-17 16:09:51 +08:00
Chris Ballance
43be383c86
kasli v2.0: drive TX_DISABLE low on all SFPs ( fixes #1570 )
...
This was the same problem as #1508 but on SFP1..3
2020-12-23 00:10:12 +08:00
Harry Ho
73271600a1
jdcg: STPL tests now perform after DAC initialization
2020-12-14 18:03:31 +08:00
eb350c3459
Drive SFP0 TX_DISABLE low during startup (as was in Kasli v1.1). Fixes Ethernet on SFP modules with pullup on this line.
...
Signed-off-by: Paweł Kulik <pawel.kulik@creotech.pl>
2020-08-24 21:39:53 +08:00
Sebastien Bourdeauducq
02900d79d0
firmware: fix typos
2020-05-29 15:21:07 +08:00
Sebastien Bourdeauducq
4e9a529e5a
kasli: integrate WRPLL
2020-05-07 21:34:02 +08:00
Sebastien Bourdeauducq
b83afedf43
kasli: light up ERROR LED on panic
2020-05-07 19:06:10 +08:00
Sebastien Bourdeauducq
4982fde898
firmware: I2C I/O expander support
2020-05-05 21:38:17 +08:00
Sebastien Bourdeauducq
3c823a483a
sayma: improve DAC sync messaging (again)
2020-04-06 22:36:43 +08:00
Sebastien Bourdeauducq
4d601c2102
sayma: improve DAC sync messaging
2020-04-06 22:36:03 +08:00
Sebastien Bourdeauducq
61d4614b61
sayma: fix/cleanup DRTIO-DAC sync interaction
2020-04-06 22:34:05 +08:00
Sebastien Bourdeauducq
ffd3172e02
sayma: move SYSREF DDMTD to RTM ( #795 )
2020-04-06 00:01:28 +08:00
Sebastien Bourdeauducq
62a52cb086
sayma: do not pollute the log with DAC status on success
2020-01-20 20:14:24 +08:00
Sebastien Bourdeauducq
6b428ef3be
sayma: initialize DAC before testing jesd::ready
2020-01-20 20:14:24 +08:00
Sebastien Bourdeauducq
5c299de3b4
sayma: print DAC status on JESD not ready error
2020-01-20 18:21:29 +08:00
Sebastien Bourdeauducq
45efee724e
sayma: add JESD204 PHY done diagnostics
2020-01-20 12:47:31 +08:00
Sebastien Bourdeauducq
3f32d78c0e
wrpll: simple ADPLL test
2019-12-31 12:12:29 +08:00
Sebastien Bourdeauducq
c5137eeb62
firmware: remove legacy hmc542 code
2019-12-20 15:25:55 +08:00
Sebastien Bourdeauducq
4832bfb08c
wrpll: i2c functions, select_recovered_clock placeholder
2019-11-27 21:21:00 +08:00
Sebastien Bourdeauducq
a78e493b72
firmware: load slave FPGA in bootloader
2019-10-31 12:42:40 +08:00
Sebastien Bourdeauducq
8f76a3218e
firmware: move i2c to libboard_misoc, enable IPv6 in bootloader, share network settings
2019-10-21 12:58:52 +08:00
Sebastien Bourdeauducq
1c5e749036
satman: remove compilation warning without JESD DACs
2019-10-21 12:53:54 +08:00
Sebastien Bourdeauducq
05e8f24c24
sayma2: JESD204 synchronization
2019-10-18 23:28:47 +08:00
Sebastien Bourdeauducq
4df2c5d1fb
sayma: prepare for SYSREF align
...
We will try DDMTD on the AMC first, as this is simpler and perhaps will work on v2 after the power supply fixes.
2019-10-08 12:30:47 +08:00
Sebastien Bourdeauducq
5ee81dc643
satman: define constants for JdacBasicRequest reqnos
2019-10-08 10:27:04 +08:00
Sebastien Bourdeauducq
4b3baf4825
firmware: run PRBS and STPL JESD204 tests
2019-10-08 00:10:36 +08:00
Sebastien Bourdeauducq
ebd5d890f1
satman: check for JESD ready
2019-10-06 23:10:57 +08:00
Sebastien Bourdeauducq
a421820a32
sayma: initialize DACs over DRTIO
2019-10-06 21:42:45 +08:00
Sebastien Bourdeauducq
f8e4cc37d0
sayma_rtm: reset and detect DACs
2019-10-06 20:15:27 +08:00
Sebastien Bourdeauducq
fdba0bfbbc
satman: move now-unrelated hmc830_7043 init away from DRTIO transceiver init
2019-10-06 19:22:46 +08:00
Sebastien Bourdeauducq
e9b81f6e33
remove serwb
...
DRTIO is a better solution
2019-10-06 18:10:23 +08:00
Sebastien Bourdeauducq
3356717316
sayma: DDMTD SYSREF measurement demonstration
2019-01-25 16:00:31 +08:00
Sebastien Bourdeauducq
4941fb3300
sayma: 2.4GHz DAC clocking (4X interpolation)
...
* gets another clock divider out of the way
* gets one cycle within range of the HMC7043 analog delay alone
* SYSREF/RTIO alignment removed, to be replaced with DDMTD-based scheme
2019-01-25 13:47:04 +08:00
Sebastien Bourdeauducq
a0eba5b09b
satman: support Grabber
2019-01-22 19:36:13 +08:00
Sebastien Bourdeauducq
332bd6090f
satman: wait for CPLL/QPLL lock after setting drtio_transceiver::stable_clkin
2019-01-07 17:09:19 +08:00
Sebastien Bourdeauducq
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
Sebastien Bourdeauducq
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
Sebastien Bourdeauducq
b92350b0f6
drtio: monitor RTIOClockMultiplier PLL ( #1155 )
...
Debugging by Tom Harty
2018-09-26 10:52:08 +08:00
Sebastien Bourdeauducq
1b7f403a4b
drtio: remove remote RTIO PHY resets
2018-09-20 11:10:32 +08:00
Sebastien Bourdeauducq
53a979e74d
rtio: cleanup resets
2018-09-20 10:58:38 +08:00
Sebastien Bourdeauducq
d38755feff
drtio: implement destination state checks on operations
2018-09-15 15:55:45 +08:00
Sebastien Bourdeauducq
f097b4104c
satman: not(has_drtio_routing) fixes
2018-09-15 12:06:47 +08:00
Sebastien Bourdeauducq
d19550daf8
firmware: simplify drtioaux function names
2018-09-14 20:32:09 +08:00
Sebastien Bourdeauducq
ae72e3a51e
firmware: add support for moninj and kern_hwreq over DRTIO switching
2018-09-14 20:26:39 +08:00
Sebastien Bourdeauducq
fa872c3341
firmware: implement DRTIO destination survey
2018-09-13 12:00:29 +08:00
Sebastien Bourdeauducq
6cf3db3485
satman: forward RTIO resets
2018-09-12 23:02:54 +08:00
Sebastien Bourdeauducq
5a9cc004f2
drtio: receive and print unsolicited aux packets
...
Helps with debugging and prevents the aux channel from getting stuck after packets arrive after the timeout.
2018-09-12 22:57:21 +08:00
Sebastien Bourdeauducq
0befec7d26
drtio: improve repeater error reports
2018-09-12 20:54:01 +08:00
Sebastien Bourdeauducq
edf403b837
drtio: improve error reporting
2018-09-12 15:44:34 +08:00
Sebastien Bourdeauducq
5439abaa9d
satman: fix error messages
2018-09-11 20:10:52 +08:00
Paweł Kulik