M-Labs
/
artiq
mirror of https://github.com/m-labs/artiq.git
2
0
Fork 2
Code Issues Projects Releases Wiki Activity
5,294 Commits 13 Branches 35 Tags 26 MiB
Commit Graph

290 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq 5d145ff912 drtio: add false paths between sys and transceiver clocks 2016-12-03 23:03:01 +08:00
Sebastien Bourdeauducq 4b97b9f8ce drtio: add clock constraints 2016-12-03 22:17:29 +08:00
Robert Jördens cbf1004df3 gateware/phaser -> gateware/ad9154_fmc_ebz 2016-12-02 14:11:41 +01:00
Sebastien Bourdeauducq 6353f6d590 drtio: support different configurations and speeds 2016-12-02 17:22:22 +08:00
Sebastien Bourdeauducq d4cb1eb998 kc705: integrate DMA 2016-12-01 16:31:00 +08:00
Robert Jördens 27160f5912 phaser: make sysref input only for timing 2016-11-29 15:28:10 +01:00
Sebastien Bourdeauducq cf342eca6e kc705_drtio_master: fix number of fine RTIO timestamp bits 2016-11-29 10:44:27 +08:00
Sebastien Bourdeauducq f4c6d6eb69 kc705_drtio_master: fix number of fine RTIO timestamp bits 2016-11-28 15:18:54 +08:00
Sebastien Bourdeauducq 85f2467e2c rtio: fix RTIO/DRTIO timestamp resolution discrepancy 2016-11-28 15:01:46 +08:00
Sebastien Bourdeauducq 9fdd29ddae drtio: connect KernelInitiator correctly 2016-11-28 14:36:18 +08:00
Sebastien Bourdeauducq c419c422fa drtio: support for local RTIO core 2016-11-28 14:33:26 +08:00
Robert Jördens 55e37b41ec phaser: use ttl_simple.Input for sync 2016-11-24 15:55:26 +01:00
Robert Jördens 8060652913 phaser: use Inout_8X 2016-11-24 15:21:03 +01:00
Robert Jördens 617650f3b2 phaser: extract target 2016-11-24 15:20:51 +01:00
Robert Jördens 32fdacd95a Merge remote-tracking branch 'm-labs/master' into phaser2 
* m-labs/master:
  runtime: don't attempt to perform writeback if disabled in kernel.
  runtime: print trace level log messages to UART during startup.
  runtime: support for targets without RTIO log channel
  runtime: support for targets without I2C
  kc705: remove stale DDS definition
  runtime: show a prompt to erase startup/idle kernels.
 2016-11-23 14:56:29 +01:00
Sebastien Bourdeauducq 0443f83d5e runtime: support for targets without RTIO log channel 2016-11-23 10:50:55 +08:00
Sebastien Bourdeauducq 0c49679984 runtime: support for targets without RTIO log channel 2016-11-23 10:48:26 +08:00
Sebastien Bourdeauducq fbd83cf9ee kc705: remove stale DDS definition 2016-11-22 22:48:22 +08:00
Sebastien Bourdeauducq 9acc7d135e gateware: common RTIO interface 2016-11-22 22:46:50 +08:00
Sebastien Bourdeauducq 0aaf120ca7 kc705: remove stale DDS definition 2016-11-22 22:46:19 +08:00
Sebastien Bourdeauducq 3459793586 Merge branch 'master' into drtio 2016-11-22 15:15:22 +08:00
Robert Jördens 4160490e0a Merge branch 'phaser' into phaser2 
* phaser: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
 2016-11-21 17:29:46 +01:00
Robert Jördens f7e8961ab0 Merge branch 'master' into phaser 
* master: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
 2016-11-21 17:29:39 +01:00
Sebastien Bourdeauducq 93c310dfa5 pipistrello: add some inputs 2016-11-21 23:43:41 +08:00
whitequark 6aa5d9f6c6 Remove last vestiges of nist_qc1. 2016-11-21 15:36:22 +00:00
whitequark 5e8888d5f3 Fully drop AD9858 and kc705-nist_qc1 support (closes #576). 2016-11-21 15:14:17 +00:00
whitequark f4b7666768 coredevice.dds: reimplement fully in ARTIQ Python. 
This commit also drops AD9858 support from software.
 2016-11-21 15:13:26 +00:00
Robert Jördens 174c4be218 phaser: false paths sys<->{jesd,phy.tx} 2016-11-21 09:57:33 +01:00
Sebastien Bourdeauducq ad1049d59a Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623" 
This reverts commit 4a62e09bd4.
 2016-11-20 21:35:07 +08:00
whitequark 30598720f4 Fix whitespace. 2016-11-20 09:50:00 +00:00
David Leibrandt 4a62e09bd4 gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 2016-11-20 15:22:32 +08:00
Robert Jördens b714137f76 phaser: 150 MHz rtio/jesd clock 2016-11-19 13:16:30 +01:00
Robert Jördens 2e482505c6 phaser: fix DDS dummy cfg 2016-11-13 17:08:59 +01:00
Robert Jördens aedb6747f2 Merge branch 'master' into phaser 
* master: (47 commits)
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
  Revert "Revert "Revert "Update for LLVM 3.9."""
  ...
 2016-11-13 16:54:28 +01:00
Sebastien Bourdeauducq 99ad9b5917 add has_dds, use config flags 2016-11-08 23:33:03 +08:00
Robert Jördens d158c69be0 phaser: fix frequency comment 2016-11-05 16:54:23 +01:00
Sebastien Bourdeauducq 47b9868c68 kc705_drtio_master: pretend drtio is rtio 2016-11-05 23:48:29 +08:00
Sebastien Bourdeauducq de065b7578 kc705_drtio_satellite: set output dir 2016-11-05 23:48:15 +08:00
whitequark 00100148f1 Si5324: actually write value of N32 into registers. 2016-11-02 07:09:04 +00:00
Sebastien Bourdeauducq 1ed3278783 remove stale TODO 2016-11-02 10:53:54 +08:00
whitequark a6ae254796 Si5324: update to free run from XA/XB, with CKIN1 having priority. 2016-11-01 16:01:24 +00:00
Sebastien Bourdeauducq 07ad00c1ca drtio: split kernel/system CSRs 2016-10-31 18:09:36 +08:00
Sebastien Bourdeauducq 9aa94e1a2d adapt to migen/misoc changes 2016-10-31 00:53:01 +08:00
Sebastien Bourdeauducq 2392113bb6 kc705: use misoc clock for false path 2016-10-30 11:16:04 +08:00
Sebastien Bourdeauducq c656a53532 kc705: clean up clock constraints 2016-10-29 21:28:01 +08:00
Sebastien Bourdeauducq ed4d57c638 use new Migen signal attribute API 2016-10-29 21:19:58 +08:00
Sebastien Bourdeauducq da5208e160 drtio: add master gateware target 2016-10-29 17:31:15 +08:00
Robert Jördens 2a1e529dcf phaser: DDS config dummies 2016-10-28 01:58:08 +02:00
Robert Jördens c428800caf phaser: spi, sma_gpio: 2.5 V 2016-10-27 15:53:49 +02:00
Sebastien Bourdeauducq e7dbed3b02 gateware: KC705 satellite target 2016-10-17 19:23:45 +08:00
Florent Kermarrec 0259c80015 phaser/kc705: remove transceiver initialization workaround 2016-10-14 19:06:43 +02:00
Robert Jördens b41b9de905 phaser: tag jesd as clock net 2016-10-14 10:46:33 +02:00
Robert Jördens 4ea3dea217 phaser: broad spectrum antibiotics with xilinx false paths 2016-10-14 10:22:03 +02:00
Robert Jördens e400f8d672 phaser: add two more registers before jesd 2016-10-14 09:54:56 +02:00
Robert Jördens 3c9c42c779 phaser: drive rtio from jesd-bufg 2016-10-14 02:26:19 +02:00
Robert Jördens 808874a523 phaser: drive cd_jesd with BUFG 2016-10-14 01:57:48 +02:00
Robert Jördens 342d6d756e phaser: bypass gtx phalign 2016-10-14 00:59:53 +02:00
Robert Jördens 89150c9817 phaser: 10G line rate 2016-10-14 00:53:38 +02:00
Robert Jördens 42c6658ffe phaser: add some more blinking leds 2016-10-13 15:21:27 +02:00
Robert Jördens 6a456bd7d4 phaser: feed correct sink (crucial) 2016-10-13 15:17:38 +02:00
Robert Jördens c8e45ae3f6 phaser: cleanup jesd phy instantiation a bit 2016-10-13 14:43:24 +02:00
Robert Jördens 78a41eec8f phaser: kc705: syntax 2016-10-13 12:38:32 +02:00
Florent Kermarrec af0e8582a2 phaser: use new jesd clocking 2016-10-13 11:51:06 +02:00
Robert Jördens 1117fe191b phaser: support core stpl 2016-10-12 12:03:29 +02:00
Robert Jördens f515c11f26 phaser: fix refclk period spec 2016-10-11 20:13:34 +02:00
Robert Jördens bae5b73155 phaser: comment out stpl test 2016-10-11 19:50:19 +02:00
Robert Jördens 2b1cca2e7e phaser: stpl 2016-10-11 19:29:27 +02:00
Robert Jördens 18d18b6685 phaser: add sync ttl input for monitoring 2016-10-10 17:13:23 +02:00
Florent Kermarrec c08caae171 phaser: use qpll 2016-10-10 17:05:42 +02:00
Robert Jördens 9b860b26e8 phaser: fix rtio pll inputs 2016-10-07 13:00:42 +02:00
Robert Jördens 09434ec054 phaser: also adapt rtio_crg 2016-10-07 12:44:22 +02:00
Florent Kermarrec b02a7234f6 phaser: use 125MHz refclk for jesd 2016-10-07 08:59:34 +02:00
Robert Jördens 1193ba4bf4 ad9154: merge csr spaces 2016-10-06 16:21:15 +02:00
Robert Jördens 4d87f0e9e0 phaser: instantiate jesd204b core, wire up 2016-10-06 14:44:22 +02:00
Robert Jördens 4a0eaf0f95 phaser: add jesd204b rtio dds 
gateware: add jesd204b awg

gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce

sawg: kernel support and docs

sawg: coredevice api fixes

sawg: example ddb/experiment

phaser: add conda package

examples/phaser: typo

sawg: adapt tests, fix accu stb

sawg: tweak dds parameters

sawg: move/adapt/extend tests

sawg: test phy, refactor

phaser: non-rtio spi

phaser: target cli update

phaser: ad9154-fmc-ebz pins

phaser: reorganize fmc signal naming

phaser: add test mode stubs

phaser: txen is LVTTL

phaser: clk spi xfer test

phaser: spi for ad9154 and ad9516

phaser: spi tweaks

ad9154: add register map from ad9144.xml

ad9516: add register map from ad9517.xml and manual adaptation

ad9154_reg: just generate getter/setter macros as well

ad9154: reg WIP

ad9154: check and fix registers

kc705: single ended rtio_external_clk

use single ended user_sma_clk_n instead of p/n to free up one clock sma

kc705: mirror clk200 at user_sma_clock_p

ad9516_regs.h: fix B_COUNTER_MSB

phase: wire up clocking differently

needs patched misoc

kc705: feed rtio_external_clock directly

kc705: remove rtio_external_clk for phaser

phaser: spi tweaks

ad9516: some startup

ad9516_reg fixes

phaser: setup ad9516 for supposed 500 MHz operation

ad9516: use full duplex spi

ad9154_reg: add CONFIG_REG_2

ad9154_reg: fixes

phaser: write some ad9154 config

ad9154_reg: fixes

ad9154: more init, and human readable setup

ad9154/ad9516: merge spi support

ad9154: status readout

Revert "kc705: remove rtio_external_clk for phaser"

This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.

Revert "kc705: feed rtio_external_clock directly"

This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.

Revert "phase: wire up clocking differently"

This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.

Revert "kc705: mirror clk200 at user_sma_clock_p"

This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.

Revert "kc705: single ended rtio_external_clk"

This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.

ad9516: 2000 MHz clock

phaser: test clock dist

phaser: test freqs

ad9154: iostandards

phaser: drop clock monitor

phaser: no separate i2c

phaser: drive rtio from refclk, wire up sysref

phaser: ttl channel for sync

ad9154: 4x interp, status, tweaks

phaser: sync/sysref 33V banks

phaser: sync/sysref LVDS_25 inputs are VCCO tolerant

phaser: user input-only ttls

phaser: rtio fully from refclk

ad9154: reg name usage fix

ad9154: check register modifications

Revert "ad9154: check register modifications"

This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.

ad9154: fix status code

ad9154: addrinc, recal serdes pll

phaser: coredevice, example tweaks

sawg: missing import

sawg: type fixes

ad9514: move setup functions

ad9154: msb first also decreasing addr

phaser: use sys4x for rtio internal ref

phaser: move init code to main

phaser: naming cleanup

phaser: cleanup pins

phaser: move spi to kernel cpu

phaser: kernel support for ad9154 spi

ad9154: add r/w methods

ad9154: need return annotations

ad9154: r/w methods are kernels

ad9154_reg: portable helpers

phaser: cleanup startup kernel

ad9154: status test

ad9154: prbs test

ad9154: move setup, document

phaser: more documentation
 2016-10-05 16:17:50 +02:00
Sebastien Bourdeauducq 8280e72e90 gateware: use new misoc CSR mapping API 2016-09-24 20:48:37 +08:00
Robert Jördens 2bb90a4449 pipistrello: shrink a few more fifos 2016-09-21 02:29:05 +02:00
Robert Jördens 454b48df97 pipistrello: shrink fifos a bit more to relax pnr 2016-07-23 12:55:49 +02:00
Sebastien Bourdeauducq 8cb29fcb3b targets/kc705: redefine user SMAs as 3.3V IO. Closes #502 2016-07-07 14:53:01 +08:00
dhslichter 141edb521a qc2: swap SPI/TTL, all TTL lines are now In+Out compatible 2016-05-19 10:42:03 +08:00
Sebastien Bourdeauducq 9707981c07 targets/kc705: fix default -H option 2016-04-30 00:30:24 +08:00
dhslichter f395a630e0 Updated qc2 pinouts for SPI and 2x DDS bus, update docs 2016-04-13 18:38:34 +08:00
Sebastien Bourdeauducq ed1c368e73 gateware: name targets consistently. Closes #290 2016-04-05 16:07:29 +08:00
Robert Jördens 8f54a1e619 pipistrello: sys_clk 83 -> 75 MHz 
This should close #341 once migen generates stable output.
 2016-03-21 13:47:32 +01:00
Sebastien Bourdeauducq 0e1f75ec49 targets/kc705/qc2: hook up HPC backplane 2016-03-16 16:19:56 +08:00
Sebastien Bourdeauducq f0b0b1bac7 support for multiple DDS buses (untested) 2016-03-09 17:12:50 +08:00
Robert Jördens f33baf339f pipistrello: drop ttls on pmod, add leds back in 2016-03-08 23:34:51 +01:00
Robert Jördens f39208c95a pipistrello: try with fewer leds/pmod ttl 2016-03-08 22:10:47 +01:00
Robert Jördens 0d431cb019 pipistrello: make pmod extension header, cleanup 2016-03-08 17:07:44 +01:00
Robert Jördens a8fe3f50c3 pipistrello: grow fifos a bit (may make ise happier) 2016-03-08 16:17:37 +01:00
Robert Jördens 00d4775da5 pipistrello: shrink fifos a bit (may make ise happier) 2016-03-08 15:40:12 +01:00
Robert Jördens 9c11cda7dc pipistrello: use ttl_simple for pmod[4:8] 2016-03-08 13:52:52 +01:00
Robert Jördens 104d641c59 pipistrello: move the spi channel like kc705 2016-03-08 13:30:05 +01:00
Robert Jördens 2180c5af7c pipistrello: make pmod[4:8] available as ttls 2016-03-08 13:07:58 +01:00
Robert Jördens e809e89571 pipistrello: adhere to pmod interface type 2 layout 2016-03-08 13:01:52 +01:00
Sebastien Bourdeauducq e8b59b00f6 soc: use add_extra_software_packages, factor builder code 2016-03-07 00:18:47 +08:00
Sebastien Bourdeauducq a8a74d7840 targets/kc705: enable I2C for all hardware adapters 2016-03-05 00:19:59 +08:00
Robert Jördens 7ff0c89d51 kc705.clock: add all spi buses 2016-03-04 00:03:48 +01:00
Sebastien Bourdeauducq 423ca03f3b runtime: bit-banged i2c support (untested) 2016-03-03 17:46:42 +08:00
Sebastien Bourdeauducq cfe72c72a2 gateware/kc705: add I2C GPIO core for QC2 2016-03-03 15:32:10 +08:00
Sebastien Bourdeauducq a901971e58 gateware/soc: factor code to connect CSR device to kernel CPU 2016-03-03 15:12:15 +08:00
Sebastien Bourdeauducq 9af12230c8 soc: add timer to kernel CPU system 2016-03-03 13:19:17 +08:00
Robert Jördens d3f36ce784 kc705: add false paths for ethernet phy 
* vivado prefers rsys_clk over sys_clk (despite the assignment hierarchy)
  (We need DONT_TOUCH and/or KEEP verilog annotations to fix this)
 2016-03-02 19:56:24 +01:00
Robert Jördens 2cc1dfaee3 kc705: move ttl channels together again, update doc 2016-03-01 19:40:32 +01:00
Robert Jördens f2ec8692c0 nist_clock: disable spi1/2 2016-03-01 01:52:46 +01:00
Robert Jördens 7ef21f03b9 nist_clock: add SPIMasters to spi buses 2016-02-29 22:19:39 +01:00
Robert Jördens 7ab7f7d75d Merge branch 'master' into spimaster 
* master:
  artiq_flash: use term 'gateware'
  targets/kc705-nist_clock: add clock generator on LA32 for testing purposes
  doc: insist that output() must be called on TTLInOut. Closes #297
  doc: update install instructions
  coredevice: do not give up on UTF-8 errors in log. Closes #300
  use m-labs setup for defaults
  fix indentation
 2016-02-29 20:47:52 +01:00
Sebastien Bourdeauducq 5fad570f5e targets/kc705-nist_clock: add clock generator on LA32 for testing purposes 2016-03-01 00:35:26 +08:00
Sebastien Bourdeauducq 572c49f475 use m-labs setup for defaults 2016-02-29 21:35:23 +08:00
Robert Jördens ad34927b0a spi: RTIO_SPI_CHANNEL -> RTIO_FIRST_SPI_CHANNEL 2016-02-29 11:35:49 +01:00
Robert Jördens 8d7e92ebae pipistrello: set RTIO_SPI_CHANNEL 2016-02-29 00:37:00 +01:00
Robert Jördens d5893d15fb gateware.kc705: make xadc/ams an extension header 2016-02-28 22:41:17 +01:00
Robert Jördens 312e09150e kc705/clock: add spi bus for dac on ams101 2016-02-28 21:17:53 +01:00
Robert Jördens ade3eda19a gateware.pipistrello: use pmod for spi 2016-02-27 11:29:40 +01:00
Robert Jördens fb929c8599 gateware/spi: stubs 2016-02-26 13:11:10 +01:00
Sebastien Bourdeauducq a8545fc1f7 targets/kc705: set up user_sma_gpio_n like other TTLs 2016-02-22 22:35:15 +08:00
Sebastien Bourdeauducq 4946a53456 Revert "targets/kc705: pre-divide input RTIO clock to improve non-50% duty cycle tolerance" 
This reverts commit 04b0db1a91.
 2016-02-22 17:52:40 +08:00
Robert Jördens d1119d7747 artiq_dir: move out of tools to unlink dependencies 2016-01-25 18:15:50 -07:00
Robert Jördens 2832d200f2 Merge remote-tracking branch 'm-labs/master' into ppp2 
* m-labs/master:
  test/worker: update
  gui/log: display level and date information in tooltips
  master: add filename in worker log entries. Closes #226
  master: finer control of worker exception reporting. Closes #233
  conda: add artiq-kc705-nist_clock
  gateware: add QC1 docstring
  gateware: add clock target from David
  gateware: clean up and integrate QC2 modifications from Daniel
  add information about CLOCK hardware
 2016-01-25 12:17:04 -07:00
Robert Jördens 8cbb60b370 Merge branch 'master' into ppp2 
* master:
  add release notes/process
  targets/kc705: fix e664fe3
  targets/kc705: fix DDS_RTIO_CLK_RATIO for AD9914. Closes #238
  transforms.inferencer: give a suggestion on "raise Exception".
  pdq2/mediator: raise instances, not classes
  pdq2: wire up more of the pipeline
  doc: use actual version
  Fix formatting.
  doc: add artiq_flash
  versioneer: remote tag_prefix = v
 2016-01-20 19:29:00 -07:00
Sebastien Bourdeauducq 18f0ee814d gateware: add QC1 docstring 2016-01-20 21:27:22 -05:00
Sebastien Bourdeauducq db8ba8d6c1 gateware: add clock target from David 2016-01-20 21:23:49 -05:00
Sebastien Bourdeauducq b3ba97e431 gateware: clean up and integrate QC2 modifications from Daniel 2016-01-20 21:17:19 -05:00
Sebastien Bourdeauducq cb5fd08713 targets/kc705: fix e664fe3 2016-01-20 09:38:44 -05:00
Sebastien Bourdeauducq e664fe38b0 targets/kc705: fix DDS_RTIO_CLK_RATIO for AD9914. Closes #238 2016-01-20 09:18:50 -05:00
Robert Jördens 57ce78c54d pipistrello: add rtio.Analyzer() 2016-01-18 19:17:44 -07:00
Robert Jördens 87dd09a71c gateware: compress bitstreams 2016-01-06 15:40:28 -07:00
Sebastien Bourdeauducq 04b0db1a91 targets/kc705: pre-divide input RTIO clock to improve non-50% duty cycle tolerance 2015-12-29 17:00:57 +08:00
Sebastien Bourdeauducq ba6c527819 gateware/targets: add RTIO log channels 2015-12-26 22:44:01 +08:00
Sebastien Bourdeauducq 4def561710 targets: integrate RTIO analyzer 2015-12-16 17:36:52 +08:00
Robert Jördens bf29e8ddc6 kc705: make config[] usage consistent 2015-12-15 12:14:30 -07:00
Robert Jördens 7886827b80 CSRConstant: also port DDS constants 2015-12-04 18:27:59 +08:00
Robert Jördens 5db1f9794e top.add_constant() -> top.config[] (CSRConstant) 
This is to be synchronized with the corresponding change in misoc.
 2015-12-04 18:27:54 +08:00
whitequark c14299dca8 Merge branch 'new-py2llvm' 2015-11-24 03:01:54 +08:00
whitequark 9fc7a42036 pipistrello: expose LED{1..4} as RTIO channels. 2015-11-23 18:26:45 +08:00
Sebastien Bourdeauducq ae99af27ee runtime,gateware: use new misoc identifier 2015-11-10 22:44:38 +08:00
Sebastien Bourdeauducq e749bae302 package everything to rebuild core device binaries 2015-11-09 10:47:14 +08:00
whitequark 51f04f6311 Explicitly use the python3.5 binary everywhere. 2015-11-07 13:39:39 +03:00
Sebastien Bourdeauducq ad5a32fb6e targets/kc705: remove unneeded argument on qc2 2015-11-04 20:09:37 +08:00
Sebastien Bourdeauducq e26147b2ac gateware,runtime: use new migen/misoc 2015-11-04 00:35:03 +08:00