whitequark
eed2db3a98
artiq_flash: make the proxy action unnecessary.
2018-01-27 15:43:27 +00:00
whitequark
d58393a1e5
runtime: build with -Cpanic=unwind.
...
This is required for backtraces to function. I'm not sure how it
turned out that master had -Cpanic=abort.
2018-01-26 23:01:24 +00:00
whitequark
08101b631d
artiq_devtool: fix typo.
2018-01-26 13:55:31 +00:00
440e19b8f9
kasli: use SFP2 for DRTIO mastering
...
SFP1 PCB routing has some issues.
Also use SFP1 LED for DRTIO in both master and satellite.
2018-01-26 19:02:54 +08:00
0d2f89db53
si5324: chip does not ack RST_REG write
2018-01-25 11:06:19 +08:00
ca4d5ae73e
artiq_flash: add kasli drtio variants
2018-01-25 00:00:07 +08:00
77f90cf93b
test: relax RTIO counter test and print result
2018-01-24 10:07:22 +08:00
ed0fbd5662
test: add test for RTIO counter ( #883 )
2018-01-24 00:28:39 +08:00
e0e795f11c
sayma_amc: constrain pin, remove keep
2018-01-23 15:42:47 +00:00
b5c035bb52
sayma_rtm: constrain serwb clock input
2018-01-23 13:54:53 +00:00
aada38f508
kasli, kc705: remove vivado "keep", cleanup a constraint
2018-01-23 13:15:26 +00:00
85102e191e
sayma_rtm: derive clocks automatically
...
* also don't add false paths unless necessary
2018-01-23 11:00:55 +00:00
7d1b3f37c9
sayma_rtm: set CFGBVS/CONFIG_VOLTAGE, compress
2018-01-23 10:56:42 +00:00
cb0016ceee
examples/sayma: fix ref_multiplier
...
SAWG is working, whoohoo!
2018-01-23 15:26:03 +08:00
cfffd9e13d
si5324: kasli support
2018-01-23 13:17:03 +08:00
649deccd9b
kasli: fix DRTIO satellite QPLL refclksel
2018-01-23 12:27:19 +08:00
4b4374f76a
sayma: register_jref for JESD204. Closes #904
2018-01-23 12:19:15 +08:00
763aefacff
kasli: fix typo
2018-01-23 12:10:54 +08:00
c7b148a704
kasli: when using both GTP clocks, send REFCLK0 to PLL0 and REFCLK1 to PLL1
2018-01-23 12:08:10 +08:00
d6157514c7
gtp_7series: flexible QPLL channel selection
2018-01-23 12:03:09 +08:00
9f87c34a94
kasli: fix QPLL instantiation
2018-01-23 10:39:31 +08:00
98a5607634
gtp_7series: set clock muxes correctly for second QPLL channel
2018-01-23 10:39:20 +08:00
25fee1a0bb
gtp_7series: use QPLL second channel
2018-01-23 10:15:49 +08:00
031d7ff020
kasli: keep using second QPLL channel for DRTIO satellite
2018-01-23 10:13:10 +08:00
626075cbc1
gtp_7series: simplify TX clocking
2018-01-23 09:49:23 +08:00
74b7baa8c5
urukul example: mmcx clock input
2018-01-22 20:30:08 +01:00
a86b28def2
urukul: example additions
...
* relax timings for faster spi xfers
* continuous readback test to explore spi speed limit
2018-01-22 20:29:30 +01:00
5a9035b122
urukul: faster spi clock
2018-01-22 18:27:40 +00:00
ca1fdaa190
ad9910: relax timing for faster spi clock
2018-01-22 18:27:40 +00:00
401e57d41c
gtp_7series: fix nchannels assert
2018-01-23 01:28:01 +08:00
aa62e91487
kasli: add DRTIO targets (no firmware)
2018-01-23 01:27:40 +08:00
296ac35f5d
sayma_amc: SFP TX disable is active-high
2018-01-23 00:32:09 +08:00
77192256ea
kc705: style
2018-01-23 00:02:35 +08:00
ab7c49d6d0
sayma_amc: raise error on invalid variant
2018-01-23 00:02:16 +08:00
c1ac3b66b1
sayma_rtm: fix 8fe463d4a
2018-01-23 00:01:45 +08:00
53facfef13
sayma: build fixes
2018-01-22 18:33:22 +08:00
25f3feeda8
refactor targets
2018-01-22 18:25:10 +08:00
5198c224a2
sayma,kasli: use new pin names
2018-01-22 11:51:07 +08:00
whitequark
8598e475e9
artiq_flash: fix a refactoring mistake.
2018-01-20 08:30:42 +00:00
c3323f0d57
hmc830: improve lock failure error report
2018-01-20 15:42:53 +08:00
whitequark
115aa0d0d6
artiq_flash: support load action for Sayma RTM FPGA.
2018-01-20 07:23:50 +00:00
whitequark
94592c7a4c
artiq_flash: unify flash handling in XC7 and Sayma programmers.
2018-01-20 07:23:50 +00:00
whitequark
1ffabac06f
artiq_flash: use atexit for tempfile cleanup.
2018-01-20 07:23:50 +00:00
Florent Kermarrec
8fe463d4a0
sayma_rtm: add UART loopback to easily know if rtm fpga is alive
2018-01-20 06:04:34 +01:00
Florent Kermarrec
74ce7319d3
sayma: reduce serwb linerate to 625Mbps (make it work on saymas with 1.8v issue, related?)
2018-01-20 06:04:18 +01:00
whitequark
f4022ba872
remoting: avoid a race condition.
2018-01-20 01:30:44 +00:00
whitequark
83278a6edb
artiq_flash: fix a refactoring bug.
2018-01-20 01:30:44 +00:00
hartytp
37fa3b29da
firmware: add register dump on HMC830 lock timeout.
2018-01-20 00:19:31 +00:00
whitequark
934bc53cb5
artiq_devtool: refactor.
2018-01-19 20:35:35 +00:00
whitequark
ebd02c4f43
artiq_flash: fix typo.
2018-01-19 18:53:49 +00:00
whitequark
1c7cb737ca
artiq_flash: refactor.
2018-01-19 17:45:49 +00:00
whitequark
bcc39a8c9d
artiq_flash: add --dry-run option.
2018-01-19 17:45:49 +00:00
whitequark
323c7e66cf
artiq_devtool: fix help message.
2018-01-19 17:45:49 +00:00
Florent Kermarrec
9eb13aba3c
liboard_artiq/hmc830_7043: allow sysref digital/analog delay configuration (will need to be adjusted for jesd subclass1)
2018-01-19 17:19:02 +01:00
Florent Kermarrec
d27727968c
add artix7 gtp (3gbps), share clock aligner with gth_ultrascale
2018-01-19 12:17:54 +01:00
cdbf95d46a
kasli: fix permissions
2018-01-19 18:31:20 +08:00
whitequark
3c0b164e4d
artiq_devtool: update for new board file convention.
...
Also fix a typo in documentation.
2018-01-19 09:43:03 +00:00
whitequark
4fd236d234
artiq_flash: cache transferred artifacts.
2018-01-19 08:28:04 +00:00
whitequark
3922a7c64b
artiq_devtool: make locking reentrant.
2018-01-19 07:58:58 +00:00
whitequark
b553804e5a
artiq_flash: implement network transparency.
2018-01-19 07:39:55 +00:00
whitequark
80cbef0031
firmware: always reset PHY when initializing Ethernet.
...
Fixes #897 .
2018-01-19 04:56:11 +00:00
whitequark
1f82ceaa85
firmware: add HMC542 (Allaki) support.
2018-01-19 04:47:26 +00:00
Florent Kermarrec
07f4e2e35a
libboard_artiq/ad9154: fix prbs test (only keep prbs7) and
...
always do it after ad9154 initialization
2018-01-18 08:19:37 +01:00
8ec33ae7bd
kasli: feed EEM clock fan-out from SI5324
2018-01-17 17:27:59 +01:00
whitequark
dbe48d3cad
Fix 3313e997.
2018-01-17 11:31:32 +00:00
whitequark
3313e997df
test: fix test_worker to work when deprecation warnings are emitted.
2018-01-17 11:27:56 +00:00
ed3e3b2791
sayma_amc: clarify --with-sawg help
2018-01-17 12:10:30 +01:00
Florent Kermarrec
f54b27b79c
sayma_amc: prepare for jesd subclass 1
2018-01-17 11:49:36 +01:00
whitequark
f77aa9b78f
artiq_flash: rename sayma to sayma_amc to fix bitstream discovery.
...
Fixes #895 .
2018-01-17 01:45:47 +00:00
whitequark
a536d6df12
artiq_flash: add sayma_rtm support.
2018-01-17 01:21:19 +00:00
whitequark
bfceef439f
Add missing parts of f317d1a2.
2018-01-17 01:14:16 +00:00
whitequark
1e896d4ba8
firmware: fix warnings.
2018-01-17 00:48:46 +00:00
whitequark
f317d1a2c6
Update board naming (again) to match DNS.
2018-01-17 00:42:56 +00:00
Florent Kermarrec
f73c3e5944
gateware/test/serwb: update and cleanup test (v2...)
2018-01-16 20:06:43 +01:00
7405006668
sayma: rtio clock is jesd fabric clock
2018-01-16 18:19:04 +01:00
whitequark
247167d34a
Revert "gateware/test/serwb: update and cleanup tests"
...
This reverts commit 5b03cc2fae
2018-01-16 08:21:26 +00:00
whitequark
444b901dbe
sayma: add RTM configuration port.
2018-01-16 07:28:00 +00:00
Florent Kermarrec
702c35821b
libboard_artiq/ad9154: add dac_status and dac_prbs (untested)
2018-01-15 22:15:35 +01:00
Florent Kermarrec
5b03cc2fae
gateware/test/serwb: update and cleanup tests
2018-01-15 21:53:40 +01:00
1c15124c5e
artiq_flash: add kasli
2018-01-15 14:17:40 +01:00
whitequark
6891141fa6
artiq_flash: add sayma support.
2018-01-15 11:43:29 +00:00
529033e016
kernel_cpu: disable PCU
...
* contributes to long timing paths on artix 7 (kasli)
* currently only used for testing and debugging
2018-01-12 12:03:50 +00:00
ac3c3871d0
kasli: s/extensions/variant/g
2018-01-12 12:29:42 +01:00
7429ee4fb6
firmware: make read leveling robust for KUS SDRAM
...
Increases the initial delay step into the valid read window as
with the original delay I was not getting out of the noisy
transition window, as evidenced by seeing read delay windows
of only 8 LSB ~10% of the time, leading to failing memory
tests
2018-01-12 10:35:38 +08:00
7c82fcf41a
targets: avoid passing cpu_type around unnecessarily
2018-01-11 11:21:55 +08:00
6d58c4390b
Merge branch 'sed-merge'
2018-01-10 13:14:39 +08:00
94d51d1364
firmware: fix drtio_dbg module syntax
2018-01-10 12:15:23 +08:00
04b2fd3e13
sayma: fix AD9154NoSAWG ramp clock domain
2018-01-10 12:11:33 +08:00
dc593ec0f0
Merge branch 'rtio-sed' into sed-merge
2018-01-10 12:04:54 +08:00
Florent Kermarrec
2009734b3c
serwb/phy: get 625Mbps linerate working, increase timeout
2018-01-09 18:54:52 +01:00
Florent Kermarrec
9c6a7f7509
serwb/kusphy: use same serwb_serdes_5x reset than s7phy
2018-01-09 18:54:05 +01:00
whitequark
267c699835
firmware: support DDRPHY without write leveling ( fixes #886 ).
...
Currently, this is kasli.
2018-01-09 02:41:02 +00:00
whitequark
07ccb9eebd
firmware: support configuration without ethphy ( #886 ).
...
Currently, this is kasli.
2018-01-08 22:16:17 +00:00
whitequark
34a5445802
compiler: don't die if addr2line cannot extract line from backtrace.
...
Fixes #885 .
2018-01-08 21:53:04 +00:00
whitequark
3a3f44af53
firmware: update smoltcp.
2018-01-08 21:41:53 +00:00
whitequark
987a9c8308
conda: update rustc to 1.23.0.
2018-01-08 21:39:15 +00:00
8813aee6b1
targets: add kasli [wip, untested]
2018-01-04 16:12:12 +01:00
161a414567
serwb: debug print on error
2018-01-04 22:23:59 +08:00
e1a75ac1c1
runtime: set log level early
...
We want to debug startup.
2018-01-04 22:19:48 +08:00
whitequark
fc9766d2fa
firmware: reset ethphy before initializing smoltcp ( fixes #884 ).
2018-01-04 11:42:35 +00:00
67746cc7a0
urukul: raise instead of assert, clean up
2018-01-03 19:22:36 +00:00
e3d66d286d
urukul: ad9910 examples
2018-01-03 18:43:04 +00:00
eae7584432
ad9910: add [wip]
2018-01-03 18:43:04 +00:00
7ac809f8b3
urukul: do io reset
2018-01-03 18:43:04 +00:00
28a3ee7e61
urukul: make STA reading robust, add io_rst(), clean up
2018-01-03 18:43:04 +00:00
cef40eef43
ad9912: clean up
2018-01-03 18:43:04 +00:00
d8dbab024d
urukul: don't deal with dds_reset for now
2018-01-03 18:43:04 +00:00
e8608d12f5
device_db.py: whitespace
2018-01-03 18:43:04 +00:00
Florent Kermarrec
1e972034e8
gateware/targets: enable serwb scrambling on sayma amc & rtm
2018-01-03 17:34:46 +01:00
Florent Kermarrec
907af25a69
gateware/serwb: add scrambling, reduce cdc fifo depth
2018-01-03 17:34:03 +01:00
Florent Kermarrec
7f4756a869
gateware/serwb: cleanup packet
2018-01-03 17:30:12 +01:00
a940550e47
urukul: add CPLD and AD9912 driver [wip]
2018-01-02 19:59:24 +01:00
c2be820e9a
kc705_dds: make ext_clkout 100 MHz
2018-01-02 19:58:47 +01:00
43686f324b
kc705_dds: fix HPC voltages
...
* VADJ is 3.3 V due to the DDS card on LPC
* the LVDS standards need to be 2.5 V
* the direction control register on HPC (FMC-DIO to VHDCI)
was LVCMOS33 but while all the LVDS pairs are at VCCIO=VADJ=3.3 V
they were instantiated as LVDS_25 (ignoring the wrongly powered bank)
* we now use 2.5 V standards on HPC consistently despite VADJ=3.3 V
and hope for the best.
2018-01-02 13:41:07 +01:00
94b84ebe7c
kc705_dds: add urukul spi/ttl channels
2018-01-02 13:20:48 +01:00
53969d3686
kc705_dds: add urukul on vhdci extension definition
2018-01-02 13:20:47 +01:00
2f8e6c7462
spi: add diff_term, save power on outputs
2018-01-02 13:20:47 +01:00
6d20b71dde
ttl_serdes_7series: refactor IOSERDES
2018-01-02 13:20:47 +01:00
whitequark
b7f38b123b
frimware: update to log 0.4.
2018-01-01 11:45:55 +00:00
745e695b09
sayma: output a ramp in the absence of SAWG channels
2017-12-31 12:18:53 +01:00
whitequark
a371b25525
bootloader: allow using without Ethernet.
2017-12-31 09:21:28 +00:00
whitequark
70ebe431fd
satman: fix build after b8f3d28b.
2017-12-31 09:21:02 +00:00
whitequark
e1253db0e8
firmware: update crc dependency, use it in libdrtioaux.
2017-12-31 09:16:11 +00:00
whitequark
b8f3d28bc0
firmware: update compiler_builtins dependency and move it to libboard.
...
This is so that we only specify it once.
2017-12-31 09:16:11 +00:00
a1b8bca1e6
Revert "artiq_flash: ignore RTM FPGA"
...
Naive optimism.
This reverts commit 100bda2582
2017-12-31 13:29:36 +08:00
100bda2582
artiq_flash: ignore RTM FPGA
...
It has no flash connected, and attempting to detect it causes unnecessary program failure when the RTM is not present.
2017-12-31 12:10:16 +08:00
38ce1f1d5d
artiq_flash: support flashing satman
...
A bit ugly and ad-hoc but I cannot think of an easy and better option right now.
2017-12-31 12:09:18 +08:00
a897d82324
ad9154: retry initialization ( #727 )
2017-12-31 11:27:43 +08:00
6e0288e568
drtio: fix GTH CPLL reset
2017-12-30 12:14:36 +08:00
379d29561b
sayma: plausibility assertion on sawg data stream
2017-12-29 19:15:40 +01:00
37f9c0b10c
spi: register clk
...
following m-labs/misoc#65
1dc68b0d0b
2017-12-28 16:50:22 +01:00
whitequark
3505878176
bootloader: add basic network support.
2017-12-28 15:26:12 +00:00
whitequark
d2687ce3c4
firmware: fix a typo replacing spiflash::SECTOR_SIZE with PAGE_SIZE.
2017-12-28 15:26:12 +00:00
whitequark
33e0393e4a
firmware: move mod ethmac to libboard.
2017-12-28 14:40:15 +00:00
whitequark
55cfdec644
firmware: enlarge bootloader partition to 4 sectors.
2017-12-28 14:39:26 +00:00
whitequark
acd13837ff
firmware: implement the new bootloader.
2017-12-28 13:18:51 +00:00
whitequark
b9754e7108
firmware: deduplicate libbuild_misoc and libbuild_artiq.
2017-12-28 13:18:51 +00:00
8153cfa88f
drtio/gth: add probes on {tx,rx}_init.done
2017-12-28 16:49:08 +08:00
c086149782
drtio/gth: use async microscope probes
2017-12-28 16:37:40 +08:00
whitequark
d94db1de5d
Revert accidentally committed parts of 1b9b5602.
2017-12-28 08:23:34 +00:00
whitequark
fcc438524c
firmware: use main.rs as the root source for non-library crates. NFC.
2017-12-28 08:20:23 +00:00
whitequark
1b9b560242
firmware: use libbuild_misoc in libdrtioaux. NFC.
2017-12-28 08:20:23 +00:00
whitequark
8f33061a6d
firmware: fix sayma_amc_standalone build with sawg.
2017-12-28 08:20:23 +00:00
4ea801b2ea
firmware: si5324 moved to board_artiq
2017-12-28 15:45:45 +08:00
whitequark
3b18ece3b7
satman: update for changes in firmware elsewhere.
2017-12-28 07:36:33 +00:00
whitequark
d3066e5044
firmware: oops, misoc #[cfg]s were missing from libboard_artiq.
2017-12-28 07:36:33 +00:00
whitequark
ca419aa3c2
firmware: split out libboard_artiq from libboard.
2017-12-28 07:07:00 +00:00
6801921fc0
drtio: instrument GTH transceiver
2017-12-28 15:03:14 +08:00
whitequark
b443fbd8f7
runtime: remove #[repr(simd)] hack.
2017-12-28 04:46:27 +00:00
whitequark
7687a34285
firmware: remove dependency on compiler-rt.
2017-12-28 04:08:29 +00:00
whitequark
4dfe71676e
firmware: remove dependency on libbase.
2017-12-28 04:03:27 +00:00
whitequark
68f128944a
firmware: clean up makefiles.
2017-12-27 23:10:47 +00:00
whitequark
d7cb4963e1
firmware: prepare config block for access from BIOS/bootloader.
...
* remove liballoc dependency from mod config,
* move mod config to libboard,
* move config sector immediately after BIOS sector.
2017-12-27 21:28:40 +00:00
whitequark
5a2cbe7088
runtime: remove borrow_mut!() in favor of backtraces.
2017-12-27 19:15:25 +00:00
whitequark
4d915ad15b
compiler: do not permit str(...). ( #878 )
2017-12-27 03:10:50 +00:00
whitequark
355acb5e13
compiler: fix typo in a0a2650f.
2017-12-26 21:55:22 +00:00
whitequark
edfacbd063
conda: ship runtime.elf in board-specific packages.
...
This is so that backtraces may be symbolized.
2017-12-26 21:50:31 +00:00
whitequark
9aec64093b
compiler: do not ever emit !tbaa on invoke instructions.
2017-12-26 21:35:08 +00:00
whitequark
a2bc12da68
Only print gateware/software mismatch warning once per process.
2017-12-26 21:13:46 +00:00
whitequark
b31b59f7ca
compiler: update for llvmlite 0.20.0.
2017-12-26 16:25:19 +00:00
whitequark
a0a2650fca
compiler: do not use invoke for calls to nounwind ffi functions.
...
Otherwise, declarations such as:
@syscall(flags={"nounwind", "nowrite"})
def foo(...):
trip an LLVM assert because the invoke instruction and the !tbaa
metadata are no longer compatible since LLVM 4.0.
2017-12-26 16:24:57 +00:00
whitequark
fd6d97f052
artiq_devtool: set ServerAliveInterval.
2017-12-26 15:41:03 +00:00
whitequark
8b4a006855
runtime: update smoltcp.
2017-12-26 14:33:56 +00:00
whitequark
c939c6183e
Update to LLVM 4.0.
2017-12-26 14:09:17 +00:00
whitequark
71eca5ad61
runtime: fix some final flash storage issues.
2017-12-26 14:09:17 +00:00
whitequark
188764693e
runtime: we're growing, put storage at 1M instead of 512K.
2017-12-26 03:34:16 +00:00
whitequark
e2513a2401
runtime: ensure flash storage never overlaps with runtime sections.
2017-12-26 03:31:37 +00:00
whitequark
6e341da3a1
runtime: simplify. NFC.
2017-12-26 02:31:28 +00:00
whitequark
061fb3dcd5
runtime: remove accidentally committed parts of a Makefile.
2017-12-25 20:30:13 +00:00
whitequark
230f2e5e18
runtime: print (address-only) backtraces on core device panics.
2017-12-25 18:32:41 +00:00
whitequark
3eec15c01d
firmware: fix compatibility with newer rustc. NFC.
2017-12-25 17:16:05 +00:00
whitequark
1570a482c2
artiq_devtool: don't require lock for reset.
...
reset is mainly useful as a part of reset+hotswap sequence, and that
already needs lock via connect.
2017-12-25 16:15:51 +00:00
70b7f28ad3
drtio: drive SFP TX disable pins
2017-12-23 22:58:51 +08:00
00ed51f6f4
satman: use new alloc_list ( #880 )
2017-12-23 22:15:39 +08:00
f8c8f3fe26
drtio: fix GTH clock domains
2017-12-23 07:21:44 +08:00
1af21c0b29
drtio: integrate GTH transceiver for Sayma
2017-12-23 01:19:59 +08:00
c57b66497c
drtio: refactor/simplify GTH, use migen
2017-12-23 01:19:44 +08:00
77897228ca
drtio: add GTH transceiver code from Florent (197c79d47)
2017-12-22 18:01:28 +08:00
ebdbaaad32
drtio: remove KC705/GTX support
2017-12-22 17:51:42 +08:00
0681d472c7
conda: fix sayma_rtm_csr.csv location for Sayma AMC
2017-12-22 17:14:10 +08:00
cbd69287a7
artiq_flash: select Sayma standalone variant by default
2017-12-22 16:54:06 +08:00
44959144d8
conda: add Sayma AMC standalone board package
2017-12-22 16:44:04 +08:00
Florent Kermarrec
86825a852c
gateware/targets/sayma_rtm: add false path between cd_sys and cd_clk200
2017-12-21 23:52:44 +01:00
69d7e93e99
drtio: adapt examples to Sayma
2017-12-21 23:09:19 +08:00
a6ffe9f38d
drtio: add Sayma top-level designs
2017-12-21 23:08:56 +08:00
4fbc8772a5
sayma: allocate all user LEDs to RTIO, make one TTL SMA input
2017-12-21 19:27:38 +08:00
a23251276d
Revert "sayma: set up Si5324 for RGMII clock rerouting"
...
This reverts commit 2b01aa22b6
2017-12-21 14:42:15 +08:00
whitequark
701308474f
runtime: update smoltcp.
2017-12-19 15:51:03 +00:00
whitequark
aaba36be7a
runtime: log moninj messages at TRACE level, like all others.
2017-12-16 22:39:13 +00:00
whitequark
8cece4f260
runtime: hotswap slightly more carefully.
...
This generally lets some last characters out of UART, last ACKs
out of queues, etc. Nothing guaranteed though.
2017-12-16 22:39:13 +00:00
whitequark
4a9d8c9459
runtime: fix a warning.
2017-12-16 22:39:13 +00:00
2b01aa22b6
sayma: set up Si5324 for RGMII clock rerouting
2017-12-17 00:25:33 +08:00
David Nadlinger
c3c13da1a6
dashboard: Restore minimized experiments when trying to open them again
...
When the user tried to open an experiment from the explorer that
already existed, previously "nothing would happen" (focus change
without the window being restored).
2017-12-15 19:11:09 +00:00
b6199bb35b
sayma: style
2017-12-15 19:45:51 +08:00
649b60ea29
targets/kc705_drtio: remove DAC FMC card support
2017-12-15 17:32:25 +08:00
f02c74cb7b
libboard/si5324: enable both clock outputs
2017-12-15 16:56:44 +08:00
9caef3c1d3
libboard/si5324: configure I2C mux on Sayma
2017-12-15 16:45:26 +08:00
341e809859
targets/sayma_rtm: enable Allaki RF switches, GPIO access to attenuator
2017-12-15 13:08:35 +08:00
77977932f2
firmware: remove AD9516 support
...
This was only used in KC705 phaser.
2017-12-14 19:16:39 +08:00
2e74ce25d8
examples/sayma: make LED blink pattern more peculiar
2017-12-14 19:10:34 +08:00
