M-Labs
/
artiq
mirror of https://github.com/m-labs/artiq.git
2
0
Fork 1
Code Issues Projects Releases Wiki Activity
6,163 Commits 13 Branches 35 Tags 27 MiB
Commit Graph

267 Commits

Author SHA1 Message Date
Sebastien Bourdeauducq 2008d02f4d runtime: use different default IP and MAC for different kinds of boards 
This helps reduce conflicts when having many boards on a development network.
 2018-08-07 10:30:50 +08:00
Chris Ballance 47740c8930 share moninj injection state between dashboards 
Previously if one dashboard overrode a channel this was not visible on
any other dashboard - the channel appeared to operate normally.
 2018-08-02 19:34:14 +08:00
Sebastien Bourdeauducq e4d48a78eb drtio: wait for remote to ack TSC synchronization 
Sayma takes a long time after TSC sync to align SYSREF, and this caused two issues:
1. Aux packets getting lost and causing error reports
2. DRTIO links reported up and kernels proceeding despite the DACs not being properly synced.
 2018-07-26 20:28:17 +08:00
Sebastien Bourdeauducq 83de8b2ba2 drtio: add ping timeout during link init 2018-07-26 20:27:53 +08:00
Sebastien Bourdeauducq 446f791180 firmware: simplify SYSREF DRTIO alignment 2018-07-26 19:37:59 +08:00
Sebastien Bourdeauducq 32c95ac034 sayma: automated DAC SYSREF phase calibration 2018-07-26 16:23:55 +08:00
Sebastien Bourdeauducq d523d03f71 sayma: automated FPGA SYSREF phase offset calibration 2018-07-26 14:53:28 +08:00
Sebastien Bourdeauducq 13984385a8 firmware: version → ident 2018-07-15 17:40:17 +08:00
Sebastien Bourdeauducq b27fa8964b add variant in identifier string 
Also add without-sawg suffixes on Sayma.

Closes #1060
Closes #1059
 2018-07-15 17:21:17 +08:00
Sebastien Bourdeauducq 1c191a62bf sayma: tune SYSREF phases 2018-07-12 12:33:35 +08:00
Sebastien Bourdeauducq a8a2ad68d3 runtime: tune Sayma SYSREF phases 2018-06-27 17:31:29 +08:00
Sebastien Bourdeauducq 68530fde07 sayma: generate 100MHz from Si5324 on standalone and master targets 
* Allow switching between DRTIO satellite and standalone without
  touching the hardware.
* Allow operating standalone and master without an additional RF
  signal generator.
 2018-06-23 10:44:38 +08:00
Sebastien Bourdeauducq de7d64d482 sayma: clock JESD204 from GTP CLK2 
This frees up GTP CLK1, which is routable to the SFP quads, for DRTIO.
 2018-06-21 22:33:53 +08:00
Sebastien Bourdeauducq e29536351d drtio: resync SYSREF when TSC is loaded 2018-06-21 17:00:32 +08:00
Sebastien Bourdeauducq 5a2a857a2f firmware: clean up SYSREF phase management 2018-06-21 16:23:41 +08:00
Sebastien Bourdeauducq 1d594d0c97 firmware: make DAC initialization failures non-fatal 
This allows using RTMs with one broken DAC for development.
 2018-06-19 19:09:38 +08:00
Robert Jördens a143e238a8 savel_fpga: get rid of unneeded config 2018-06-12 10:24:04 +02:00
whitequark d686d33093 runtime: print hex dumps around PC/EA in case of exception. 
For #1026.
 2018-06-01 21:17:59 +00:00
Sebastien Bourdeauducq 560889372f firmware: grabber support 2018-05-29 10:26:36 +08:00
Sebastien Bourdeauducq b10d3ee4b4 make RTIO clock switch optional and simplify 
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
 2018-05-18 17:41:34 +08:00
whitequark 5744d97d59 firmware: adjust backtrace addresses correctly. 2018-05-17 08:13:55 +00:00
whitequark 31c6c79204 firmware: implement an edge profiler. 
It doesn't work extremely well, and the results can be somewhat
confusing, and it needs a libunwind patch, but it's the best I could
do and it seems still useful.
 2018-05-16 21:53:53 +00:00
whitequark ca93b94aea firmware: move config requests to management protocol. 
They were only in session protocol because of historical reasons.
 2018-05-16 14:32:49 +00:00
Florent Kermarrec 7fe49a78d2 firmware/runtime/session: fix compilation when no rtio core 2018-05-15 23:47:47 +02:00
whitequark 9f5b76253c firmware: remove some unnecessary unwraps. 2018-05-15 15:05:19 +00:00
whitequark b54926134c firmware: update the signature of #[lang="panic_fmt"]. 2018-05-15 15:05:19 +00:00
whitequark 9347f6e00c firmware: use a dedicated error type in the scheduler. 
After this commit, error handling does not normally allocate
(session::Error::{Load,Unexpected} still allocate, but those two
are very rare).

Good riddance to libstd_artiq.
 2018-05-15 14:19:44 +00:00
whitequark 479cb9a857 firmware: use dedicated error types for every protocol and thread. 
Good riddance to io::Error::Unrecognized.
 2018-05-15 13:27:23 +00:00
whitequark 514eab3d39 Update Rust to 1.26.0. 2018-05-15 12:47:51 +00:00
whitequark 26faaad2b7 firmware: remove io::Result<T, E> in favor of Result<T, impl Fail>. 
This doesn't yet use impl Fail since std_artiq::io::Error doesn't
impl it.
 2018-05-15 08:29:03 +00:00
whitequark 140ca729aa firmware: rename io::Error::{UnexpectedEof→UnexpectedEnd}. 
We don't even have files.
 2018-05-15 08:27:45 +00:00
whitequark ce0593315b firmware: move {ProtoRead,ProtoWrite} to the root of libio. 2018-05-15 08:16:09 +00:00
whitequark 5ead27f2e1 firmware: eliminate uses of std_artiq::io::{Read,Write} from runtime. 2018-05-14 19:11:57 +00:00
whitequark cf33ba748d firmware: eliminate non-io uses of std_artiq from runtime. 
Just replace these with references to alloc.
 2018-05-14 19:11:57 +00:00
whitequark ae50196186 firmware: rename libproto to libproto_artiq. 
libproto_artiq only has ARTIQ-specific protocols.
 2018-05-14 18:09:44 +00:00
whitequark 02b8426f60 firmware: rename libboard to libboard_misoc. 
By analogy with libbuild_misoc. Hopefully one day it actually gets
moved to misoc...
 2018-05-14 18:09:44 +00:00
whitequark 1ff42683d9 firmware: merge libamp into libboard_artiq. 
All gateware interfaces live in libboard_artiq, but libamp predates
libboard_artiq.
 2018-05-14 17:33:25 +00:00
whitequark 764386c9e3 firmware: split libdrtioaux into libproto and libboard_artiq modules. 
All other protocol code lives in libproto, and all other gateware
interfaces live in libboard_artiq.
 2018-05-14 17:26:59 +00:00
whitequark 6a10d54432 firmware: migrate rpc_proto to new libio. 
This closes an old and horrible issue in that some code in ksupport
may implicitly try to allocate and we'll never know until it crashes
at runtime inside liballoc_stub.

This also removes liballoc_stub.
This also removes ReadExt and WriteExt from libproto.
Hooray!
 2018-05-14 17:26:59 +00:00
whitequark 09617c9f5e firmware: migrate session_proto to new libio. 2018-05-14 15:17:32 +00:00
whitequark 976bb5e935 firmware: migrate analyzer_proto to new libio. 2018-05-14 12:51:59 +00:00
whitequark d543c9aa63 firmware: backtrace_artiq → unwind_backtrace. 
This crate isn't ARTIQ-specific.
 2018-05-14 07:33:00 +00:00
whitequark 68ef09ed73 firmware: stop profiler before rebooting too. 2018-05-05 01:52:44 +00:00
whitequark b1d349cc1b firmware: implement a sampling profiler. 
Does not yet support constructing call graphs.
 2018-05-05 00:44:40 +00:00
whitequark 623614f835 Update LLVM to 6.0.0 and Rust to 1.25.0. 2018-05-01 08:57:37 +00:00
whitequark 3b054855ec firmware: add allocator debug feature, invoked by artiq_coredebug frontend. 2018-04-21 19:39:46 +00:00
whitequark 873324d52b firmware: don't truncate queued RPCs (fixes #985). 2018-04-21 19:39:46 +00:00
whitequark 0d5fd1e83d runtime: fix race condition in log extraction code paths (#979). 
The core device used to panic if certain combinations of borrows
of the log buffer happened. Now they all use .try_borrow_mut().
 2018-04-20 15:26:00 +00:00
Sebastien Bourdeauducq 416232cb64 runtime: do not reset RTIO PHY on core.reset(). Closes #971 2018-03-28 10:51:07 +08:00
Sebastien Bourdeauducq f2cc2a5ff2 firmware: reset local RTIO PHYs on startup (#958) 2018-03-22 16:29:31 +08:00