Commit Graph

24 Commits

Author SHA1 Message Date
Robert Jördens a6b45caefa conda: new openocd
* new jtagspi protocol
* new proxy bitstreams
2017-10-23 12:39:27 +02:00
Robert Jördens 34ddda7a0c conda: use single-tap proxy bitstreams 2017-08-15 14:30:53 -06:00
Robert Jördens 5c66b63768 setup.py etc: update license 2017-07-18 11:31:43 +02:00
Sebastien Bourdeauducq 10fb6c6216 conda: set ignore_prefix_files on all board packages 2017-06-15 16:25:52 +08:00
Sebastien Bourdeauducq 5e94810e84 Revert "Revert "conda: use new noarch system for board packages as well""
This reverts commit 832fb139a0.
2017-06-15 16:10:58 +08:00
Sebastien Bourdeauducq 832fb139a0 Revert "conda: use new noarch system for board packages as well"
Never missing an opportunity to be awful, conda helps itself with the .fbi files and merrily patches the strings inside them that contain paths resembling the conda build folder, resulting of course in corrupption and CRC errors.

This reverts commit c856b22579.
2017-06-15 16:00:00 +08:00
Sebastien Bourdeauducq c856b22579 conda: use new noarch system for board packages as well 2017-06-06 15:05:13 +08:00
Sebastien Bourdeauducq 0b437c7645 conda: shorten git hash in strings to 8 characters instead of 12 2017-06-05 11:43:10 +08:00
whitequark d383145752 conda: use GIT_FULL_HASH rather than GIT_DESCRIBE_HASH. 2017-04-20 16:58:38 +00:00
whitequark c9b20a1765 Commit missing parts of 0d0ddf2e. 2017-04-20 16:53:16 +00:00
whitequark 0d0ddf2e58 conda: limit git hashes in build numbers to 8 chars exactly.
Before this commit, a nasty edge case was possible where repositories
on different builders have had different sets of objects fetched
into them, and so git-describe selected different lengths for
abbreviating hashes.

See also https://github.com/conda/conda-build/issues/1940.
2017-04-20 16:40:10 +00:00
whitequark 3de19f6786 conda: use verbose misoc build. 2017-02-05 14:26:08 +00:00
Robert Jördens fb56c32d35 conda: use artiq-dev metapackage 2017-02-01 15:34:05 +01:00
whitequark c585784cd9 conda: bump misoc dependency. 2017-01-30 08:03:41 +00:00
Sebastien Bourdeauducq bff5f1b714 conda: update migen 2017-01-30 13:39:44 +08:00
Robert Jördens 9e92706d09 conda: pin misoc/migen package hashes 2017-01-27 14:43:24 +01:00
whitequark c45a170bb4 firmware: update for Rust 1.16.0. 2016-12-26 17:20:29 +00:00
Robert Jördens ca636ef28a conda/phaser: build-depend on numpy 2016-12-08 16:23:40 +01:00
Robert Jördens 7657cf1264 phaser: bump misoc/migen 2016-11-29 14:55:15 +01:00
Robert Jördens 41779367b5 phaser: adapt conda recipe 2016-11-24 16:04:13 +01:00
Robert Jördens 7664b226f2 phaser/conda: bump jesd204b 2016-11-18 15:34:03 +01:00
Robert Jördens 062aca2a6b conda/phaser: build-depend on jesd204b 2016-10-19 14:44:54 +02:00
Robert Jördens 81511feab8 phaser: README: specify versions 2016-10-12 17:13:06 +02:00
Robert Jördens 4a0eaf0f95 phaser: add jesd204b rtio dds
gateware: add jesd204b awg

gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce

sawg: kernel support and docs

sawg: coredevice api fixes

sawg: example ddb/experiment

phaser: add conda package

examples/phaser: typo

sawg: adapt tests, fix accu stb

sawg: tweak dds parameters

sawg: move/adapt/extend tests

sawg: test phy, refactor

phaser: non-rtio spi

phaser: target cli update

phaser: ad9154-fmc-ebz pins

phaser: reorganize fmc signal naming

phaser: add test mode stubs

phaser: txen is LVTTL

phaser: clk spi xfer test

phaser: spi for ad9154 and ad9516

phaser: spi tweaks

ad9154: add register map from ad9144.xml

ad9516: add register map from ad9517.xml and manual adaptation

ad9154_reg: just generate getter/setter macros as well

ad9154: reg WIP

ad9154: check and fix registers

kc705: single ended rtio_external_clk

use single ended user_sma_clk_n instead of p/n to free up one clock sma

kc705: mirror clk200 at user_sma_clock_p

ad9516_regs.h: fix B_COUNTER_MSB

phase: wire up clocking differently

needs patched misoc

kc705: feed rtio_external_clock directly

kc705: remove rtio_external_clk for phaser

phaser: spi tweaks

ad9516: some startup

ad9516_reg fixes

phaser: setup ad9516 for supposed 500 MHz operation

ad9516: use full duplex spi

ad9154_reg: add CONFIG_REG_2

ad9154_reg: fixes

phaser: write some ad9154 config

ad9154_reg: fixes

ad9154: more init, and human readable setup

ad9154/ad9516: merge spi support

ad9154: status readout

Revert "kc705: remove rtio_external_clk for phaser"

This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.

Revert "kc705: feed rtio_external_clock directly"

This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.

Revert "phase: wire up clocking differently"

This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.

Revert "kc705: mirror clk200 at user_sma_clock_p"

This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.

Revert "kc705: single ended rtio_external_clk"

This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.

ad9516: 2000 MHz clock

phaser: test clock dist

phaser: test freqs

ad9154: iostandards

phaser: drop clock monitor

phaser: no separate i2c

phaser: drive rtio from refclk, wire up sysref

phaser: ttl channel for sync

ad9154: 4x interp, status, tweaks

phaser: sync/sysref 33V banks

phaser: sync/sysref LVDS_25 inputs are VCCO tolerant

phaser: user input-only ttls

phaser: rtio fully from refclk

ad9154: reg name usage fix

ad9154: check register modifications

Revert "ad9154: check register modifications"

This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.

ad9154: fix status code

ad9154: addrinc, recal serdes pll

phaser: coredevice, example tweaks

sawg: missing import

sawg: type fixes

ad9514: move setup functions

ad9154: msb first also decreasing addr

phaser: use sys4x for rtio internal ref

phaser: move init code to main

phaser: naming cleanup

phaser: cleanup pins

phaser: move spi to kernel cpu

phaser: kernel support for ad9154 spi

ad9154: add r/w methods

ad9154: need return annotations

ad9154: r/w methods are kernels

ad9154_reg: portable helpers

phaser: cleanup startup kernel

ad9154: status test

ad9154: prbs test

ad9154: move setup, document

phaser: more documentation
2016-10-05 16:17:50 +02:00