Sebastien Bourdeauducq
bbac92442f
sayma: check hmc7043 slip period
2019-01-24 20:13:43 +08:00
Sebastien Bourdeauducq
f8b39b0b9a
sayma: enable 2X DAC interpolation
...
Seems to work just fine and gets one clock divider out of the way.
2019-01-24 18:28:01 +08:00
Sebastien Bourdeauducq
2e3555de85
firmware: fix compilation error with more than 1 Grabber
2019-01-22 19:35:46 +08:00
Sebastien Bourdeauducq
62599c5f91
firmware: use consistent terminology
2019-01-09 13:46:18 +08:00
Sebastien Bourdeauducq
887cb110a7
firmware: fix default DRTIO routing table
2019-01-08 20:46:53 +08:00
Sebastien Bourdeauducq
b5501aaf00
firmware: program I2C switch on Sayma RTM
2019-01-06 14:54:52 +08:00
Sebastien Bourdeauducq
a93fdb8c9d
drtio: disable all destinations in gateware at startup
...
Otherwise, kernels fail to get a RTIODestinationUnreachable exception when attempting
to reach a DRTIO destination that has never been up.
2019-01-04 23:42:12 +08:00
Sebastien Bourdeauducq
cc58318500
siphaser: autocalibrate skew using RX synchronizer
...
* removes the hardcoded, (poorly) manually determined skew value
* does not need si5324_clkout_fabric anymore (broken on Sayma RTM due to wrong IO voltage)
2019-01-02 22:29:27 +08:00
Sebastien Bourdeauducq
969a305c5a
Merge branch 'master' into switching125
2018-10-04 10:08:42 +08:00
Sebastien Bourdeauducq
3d965910f7
Revert "drtio: implement per-destination underflow margins"
...
This reverts commit 142c952e3d
.
2018-09-19 17:05:48 +08:00
Sebastien Bourdeauducq
142c952e3d
drtio: implement per-destination underflow margins
2018-09-19 17:03:15 +08:00
Sebastien Bourdeauducq
f7ad7a99e3
firmware: set DEST_COUNT to 0 without routing
2018-09-15 19:10:52 +08:00
Sebastien Bourdeauducq
d38755feff
drtio: implement destination state checks on operations
2018-09-15 15:55:45 +08:00
Sebastien Bourdeauducq
65da1fee4a
firmware: fix build without DRTIO
2018-09-14 20:38:41 +08:00
Sebastien Bourdeauducq
d19550daf8
firmware: simplify drtioaux function names
2018-09-14 20:32:09 +08:00
Sebastien Bourdeauducq
ae72e3a51e
firmware: add support for moninj and kern_hwreq over DRTIO switching
2018-09-14 20:26:39 +08:00
Sebastien Bourdeauducq
fa872c3341
firmware: implement DRTIO destination survey
2018-09-13 12:00:29 +08:00
Sebastien Bourdeauducq
420e1cb1d0
cri: fix firmware routing table access
2018-09-12 18:08:16 +08:00
Sebastien Bourdeauducq
36e3fedfc6
runtime: print routing table at boot
2018-09-11 20:10:33 +08:00
Sebastien Bourdeauducq
f5b386c0d8
firmware: fix routing table formatting
2018-09-11 18:22:45 +08:00
Sebastien Bourdeauducq
b38c57d73b
firmware: send DRTIO routing table to satellite
2018-09-11 14:12:41 +08:00
Sebastien Bourdeauducq
3d29a7ed14
firmware: add fmt::Display to RoutingTable
2018-09-11 11:27:56 +08:00
Sebastien Bourdeauducq
31bef9918e
firmware: fix drtio_routing compatibility with master and satellite
2018-09-10 20:16:42 +08:00
Sebastien Bourdeauducq
7ae44f3417
firmware: add routing table (WIP)
2018-09-09 21:49:28 +08:00
Robert Jördens
312256a18d
grabber: fix frame size off-by-1
2018-09-07 16:55:43 +02:00
Sebastien Bourdeauducq
87e0384e97
drtio: separate aux controller
...
This helps with managing CSR groups and heterogeneous (satellite/repeaters) DRTIO cores.
2018-09-05 17:56:58 +08:00
Sebastien Bourdeauducq
d1d26e2aa3
hmc7043: add explanation about HMC_SYSREF_DIV
2018-08-18 11:43:40 +08:00
Sebastien Bourdeauducq
f75a317446
hmc7043: automatically determine output groups
2018-08-18 11:43:23 +08:00
Sebastien Bourdeauducq
c498b28f88
hmc7043: disable FPGA_ADC_SYSREF
2018-08-18 11:42:57 +08:00
Sebastien Bourdeauducq
167e97efd2
sayma: support external RTM clocking
2018-08-17 22:57:54 +08:00
Sebastien Bourdeauducq
5c3e834c4d
ad9154: retry DAC initialization on STPL or PRBS failure
...
Works around #1127
2018-08-17 20:52:55 +08:00
Sebastien Bourdeauducq
738d2c6bcb
hmc7043: REFSYNCIN → RFSYNCIN
2018-08-11 12:07:17 +08:00
Robert Jördens
f7678cc24a
grabber: refactor state machine
2018-08-07 18:07:46 +02:00
Robert Jördens
6cd2432e30
grabber: log all resolution changes
...
close #1120
2018-08-07 16:21:21 +02:00
Robert Jördens
99a15ca0c6
grabber: rationalize derived traits
2018-08-07 16:21:21 +02:00
Sebastien Bourdeauducq
49f7a1610f
sayma: use GTP_CLK1 only for all variants ( #1080 )
2018-08-07 20:53:14 +08:00
Sebastien Bourdeauducq
bbe36b94f7
ad9154: enable sync in init
2018-08-06 19:02:27 +08:00
Sebastien Bourdeauducq
7f0b2ff594
jesd204sync: work around HMC7043 poor behavior with combined delays
...
The HMC7043 outputs poorly controlled signals when adjusting
two delays at once. This commit puts the DAC in one-shot SYSREF mode,
and only triggers synchronizations when SYSREF is stable.
2018-08-06 17:43:17 +08:00
Sebastien Bourdeauducq
f32f0126e2
Revert "ad9154: use continuous sync mode"
...
The HMC7043 is not really glitchless.
This reverts commit bd968211de
.
2018-08-06 16:59:53 +08:00
Sebastien Bourdeauducq
bd968211de
ad9154: use continuous sync mode
2018-08-06 00:27:10 +08:00
Sebastien Bourdeauducq
e83ee3a07a
hmc7043: disable GTP_CLK1 when not in use
...
Termination and biasing are not active at the FPGA when IBUFDS_GTE3 is
not instantiated, and driving a clock then leads to overvoltage.
2018-08-03 10:03:52 +08:00
Sebastien Bourdeauducq
446f791180
firmware: simplify SYSREF DRTIO alignment
2018-07-26 19:37:59 +08:00
Sebastien Bourdeauducq
32c95ac034
sayma: automated DAC SYSREF phase calibration
2018-07-26 16:23:55 +08:00
Sebastien Bourdeauducq
dbcf2fe9b4
firmware: remove 'chip found' messages on Sayma
2018-07-26 16:07:37 +08:00
Sebastien Bourdeauducq
d523d03f71
sayma: automated FPGA SYSREF phase offset calibration
2018-07-26 14:53:28 +08:00
Sebastien Bourdeauducq
19c51c644e
grabber: cleanup GRABBER_STATE
2018-07-24 19:08:51 +08:00
Sebastien Bourdeauducq
b27fa8964b
add variant in identifier string
...
Also add without-sawg suffixes on Sayma.
Closes #1060
Closes #1059
2018-07-15 17:21:17 +08:00
Sebastien Bourdeauducq
46fb5adac3
grabber: fix frequency counter formula
2018-07-12 20:14:38 +08:00
Sebastien Bourdeauducq
82def6b535
grabber: add frequency counter
...
Cameras are a bit obscure about what they output, this can help with troubleshooting.
2018-07-12 17:05:18 +08:00
Sebastien Bourdeauducq
29c35ee553
hmc7043: fix dumb mistake in previous commit
2018-07-12 13:01:41 +08:00
Sebastien Bourdeauducq
8802b930de
hmc7043: add delay after init
...
Delay required at step 9 of the "Typical Programming Sequence" (page 24 of the datasheet)
2018-07-12 12:37:12 +08:00
Sebastien Bourdeauducq
c66f9483f8
hmc7043: wait after changing delays
...
Allows for the SPI transaction to finish, and for the delay to stabilize.
2018-07-12 12:33:53 +08:00
Sebastien Bourdeauducq
773240bef4
hmc7043: test GPO before using
...
Based on code by David.
2018-07-12 11:30:24 +08:00
Sebastien Bourdeauducq
4843832329
hmc7043: check phase status on init. Closes #1055
...
Troubleshooting by David.
2018-07-11 19:45:24 +08:00
Sebastien Bourdeauducq
9397fa7f5a
hmc7043: unstick SYSREF FSM ( #1055 )
...
Troubleshooting by David.
Additionally, register 7D is broken.
Checking phase init state has to be done through another means.
2018-07-11 19:11:01 +08:00
Sebastien Bourdeauducq
4f56710e4b
grabber: add parser, report detected frame size in core device log
2018-07-10 02:06:37 +08:00
Robert Jördens
4eb26c0050
hmc7043: enable group 5
2018-07-03 14:16:31 +02:00
Sebastien Bourdeauducq
a65721d649
sayma: put RTM clock tree into the siphaser loop
...
* Fixes one bug where siphaser was one Si5324 output and the rest of the
system was clocked by the other. With the Si5324 settings we have, skew
between the outputs is not controlled.
* Puts the coaxial cable between AMC and RTM into the siphaser loop.
2018-06-27 21:46:55 +08:00
Sebastien Bourdeauducq
46c044099c
hmc7043,satman: verify alignment of SYSREF slips
2018-06-27 17:36:13 +08:00
Sebastien Bourdeauducq
7dfd70c502
hmc7043: make margin_{minus,plus} consistent with ad9154
2018-06-27 17:35:26 +08:00
Sebastien Bourdeauducq
4bbdd43bdf
hmc7043: do not freeze if SYSREF slip fails
2018-06-27 17:32:56 +08:00
Sebastien Bourdeauducq
76fc63bbf7
jesd204: use separate controls for reset and input buffer disable
2018-06-22 11:38:18 +08:00
Sebastien Bourdeauducq
de7d64d482
sayma: clock JESD204 from GTP CLK2
...
This frees up GTP CLK1, which is routable to the SFP quads, for DRTIO.
2018-06-21 22:33:53 +08:00
Sebastien Bourdeauducq
07bcdfd91e
hmc7043: stricter check of FPGA SYSREF margin
2018-06-21 22:26:49 +08:00
Sebastien Bourdeauducq
5a2a857a2f
firmware: clean up SYSREF phase management
2018-06-21 16:23:41 +08:00
Sebastien Bourdeauducq
05e908a0fd
hmc7043: align SYSREF with RTIO
2018-06-21 15:54:42 +08:00
Sebastien Bourdeauducq
9741654cad
hmc7043: style
2018-06-21 15:54:42 +08:00
Sebastien Bourdeauducq
45e8263208
hmc7043: do not configure phases during initial init
...
They are determined later on.
2018-06-21 15:54:42 +08:00
Sebastien Bourdeauducq
814d0583db
hmc7043: improve smoothness of sysref phase control
2018-06-20 17:40:48 +08:00
Sebastien Bourdeauducq
5272c11704
typo
2018-06-20 17:05:20 +08:00
Sebastien Bourdeauducq
0c32d07e8b
ad9154: new sysref scan
...
Print margins around the pre-defined fixed phase.
Also report error if margins are too small.
The fixed phase is also changed by this commit (the value 88 is
from before the new HMC7043 initialization code, and is probably wrong).
2018-06-20 00:15:58 +08:00
Sebastien Bourdeauducq
3d0e92aefd
hmc7043: check that chip is disabled at startup
2018-06-19 23:49:17 +08:00
Sebastien Bourdeauducq
740e6863c3
hmc7043: add delay after releasing hardware reset
2018-06-19 23:48:48 +08:00
Sebastien Bourdeauducq
eb3259b847
firmware: reduce number of DAC initialization attempts
...
Faster startup when one DAC is broken.
2018-06-19 19:10:23 +08:00
Sebastien Bourdeauducq
1d594d0c97
firmware: make DAC initialization failures non-fatal
...
This allows using RTMs with one broken DAC for development.
2018-06-19 19:09:38 +08:00
Sebastien Bourdeauducq
574892a4e5
firmware/serwb: cleanup and improve messaging
2018-06-19 15:11:03 +08:00
Sebastien Bourdeauducq
c862471165
typo
2018-06-19 14:35:24 +08:00
Sebastien Bourdeauducq
476cfa0f53
si5324: improve lock messaging
2018-06-19 14:29:57 +08:00
Sebastien Bourdeauducq
d29b3dd588
hmc830: compile-time configurable reference frequency
2018-06-19 13:47:32 +08:00
Sebastien Bourdeauducq
0e640a6d6f
hmc7043: fix SYSREF to meet s/h at FPGA ( #794 )
2018-06-18 17:04:12 +08:00
Robert Jördens
6272052d15
ad9154: don't drive the bsm with txen pins
2018-06-18 10:04:42 +02:00
Sebastien Bourdeauducq
4f0c918dd3
slave_fpga: improve messaging
2018-06-17 00:27:27 +08:00
Robert Jördens
40baa8ecba
hmc7043: disable ch 10 and 11 group
2018-06-15 15:34:31 +00:00
Robert Jördens
edfae3c4ba
hmc7043: make fpga fabric clocks lvds
...
2 V common and 1.9 Vpp swing
is brutal to the banks (HP 1.8V AMC and RT 1.8V RTM)
2018-06-15 14:24:33 +00:00
Robert Jördens
f385add8b1
slave_fpga: disable cclk and din drive when done
...
to guard against accidental contention (old rtm gateware
but #813 rework done)
2018-06-13 16:26:48 +00:00
Robert Jördens
a9a25f2605
sayma_rtm: drive ref_lo_clk_sel, and set clk muxes early
2018-06-12 20:00:12 +02:00
Thomas Harty
b90a8fcc82
Merge branch 'master' of https://github.com/m-labs/artiq
2018-06-12 14:55:22 +01:00
ion
28ecf81c6c
Sayma: HMC7043 init and detect no longer need results.
2018-06-12 13:10:26 +01:00
ion
c8935f7adf
Sayma: bypass dividers where possible to minimize noise (nb this changes the output skew).
2018-06-12 12:56:04 +01:00
hartytp
7a0140ecb2
Sayma HMC830: update interface and register writes. ( #1068 )
...
* Break the HMC830 init into separate functions for general purpose (but, integer-N) init, setting dividers and checking lock
* Use 1.6mA ICP (which the loop filter was optimized for)
* Go through the data sheet carefully and set all registers to the correct value (e.g. ensure that all settings are correctly optimized for integer-N usage)
* Change divider values (now using 100MHz PFD, which should give lower noise in theory)
2018-06-12 12:37:17 +01:00
Robert Jördens
a9d97101fc
slave_fpga: add another check
2018-06-12 10:24:04 +02:00
Robert Jördens
a143e238a8
savel_fpga: get rid of unneeded config
2018-06-12 10:24:04 +02:00
Robert Jördens
4912f53ab4
slave_fpga: board_misoc
2018-06-12 10:24:04 +02:00
hartytp
cb6e44b23a
Sayma: disable unused HMC7043 outputs.
2018-06-12 16:18:20 +08:00
Sebastien Bourdeauducq
af88c4c93e
clean up hmc7043 reset
2018-06-05 20:41:48 +08:00
Thomas Harty
988054f4bb
Sayma: fix mistake in HMC7043 init code.
2018-06-05 19:22:04 +08:00
Thomas Harty
bd1ac7cf3b
Configure HMC7043 to give deterministic phase differences between its outputs
2018-06-05 19:22:04 +08:00
Thomas Harty
ac5c4913ec
Sayma RTM: hold hmc7043 in reset/mute state during init.
2018-06-05 19:22:04 +08:00
Florent Kermarrec
b82158a2de
firmware/ad9154: add stpl test
2018-06-05 02:08:57 +02:00
Florent Kermarrec
925b47b077
firmware/ad9154: reset the dac between each configuration attempt
2018-06-04 14:03:26 +02:00
Sebastien Bourdeauducq
560889372f
firmware: grabber support
2018-05-29 10:26:36 +08:00
Florent Kermarrec
bcb9c3d09d
firmware/serwb: move prbs_test outside of wait_init, add wishbone_test
2018-05-24 16:53:47 +02:00
Florent Kermarrec
353767bfdb
firmware/hmc830: add VCO subsystem register 6 programming (suggested by hartytp, tested on hardware without regression)
2018-05-24 16:49:49 +02:00
Florent Kermarrec
ad89c42acc
firmware/serwb: automatically adjust prbs test delay to prbs test cycles, increase prbs test cycles
2018-05-24 10:20:55 +02:00
Florent Kermarrec
19e5280824
firmware/ad9154: cleanup DAC init
...
- Split dac_setup in dac_reset, dat_detect & dac_setup.
- Only do one reset/detection.
- Configure before doing SYSREF scan (otherwise scan don't work at the first scan after power up).
- Do the spi_setup in each function.
2018-05-24 09:34:00 +02:00
Florent Kermarrec
fa3b48737b
firmware/hmc830: Added magic word to HMC830 init sequence (from gkasprow & marmeladapk)
2018-05-24 09:23:00 +02:00
Sebastien Bourdeauducq
d4f074b1e1
firmware: fix Allaki addressing. Closes #993
2018-05-17 16:02:21 +08:00
Sebastien Bourdeauducq
a640041844
firmware: improve ad9154/hmc830/hmc7043 messaging
2018-05-16 23:15:17 +08:00
Sebastien Bourdeauducq
fedf7f0c87
firmware/ad9154: cleanup sysref scan and run everytime
2018-05-16 23:01:19 +08:00
Sebastien Bourdeauducq
1364cd2948
firmware/hmc830_7043: break out HMC830 SPI mode selection
2018-05-16 22:46:45 +08:00
Sebastien Bourdeauducq
0aadd3a361
firmware/hmc830_7043: improve messaging
2018-05-16 22:46:45 +08:00
whitequark
1b0384c513
firmware: fix satman build.
2018-05-15 16:35:05 +00:00
Florent Kermarrec
c18a73d45f
sayma_amc/rtm: use new serwb low-speed phy
2018-05-15 16:40:50 +02:00
whitequark
ae50196186
firmware: rename libproto to libproto_artiq.
...
libproto_artiq only has ARTIQ-specific protocols.
2018-05-14 18:09:44 +00:00
whitequark
02b8426f60
firmware: rename libboard to libboard_misoc.
...
By analogy with libbuild_misoc. Hopefully one day it actually gets
moved to misoc...
2018-05-14 18:09:44 +00:00
whitequark
1ff42683d9
firmware: merge libamp into libboard_artiq.
...
All gateware interfaces live in libboard_artiq, but libamp predates
libboard_artiq.
2018-05-14 17:33:25 +00:00
whitequark
764386c9e3
firmware: split libdrtioaux into libproto and libboard_artiq modules.
...
All other protocol code lives in libproto, and all other gateware
interfaces live in libboard_artiq.
2018-05-14 17:26:59 +00:00
Florent Kermarrec
6b4bbe31f7
firmware/ad9154: use fixed hmc7043 sysref phase (found with scan)
2018-05-12 00:12:59 +02:00
Florent Kermarrec
3c49eba0a0
firmware/hmc830_7043: put hmc7043 in sleep mode before hmc830 initialization
...
hmc7043 seems to generate broadband noise when not initialized. This allows isolating issues. If hmc830 still does not always lock correctly, then this is not related to hmc7043 broadband noise.
2018-05-12 00:06:49 +02:00
Sebastien Bourdeauducq
2cece47b10
firmware/si5324: fix compilation warning
2018-05-09 20:00:08 +08:00
Florent Kermarrec
9de08f85c6
firmware/ad9154: reduce verbosity of dac_sysref_cfg
2018-05-09 10:57:00 +02:00
whitequark
c646409dbe
firmware: fix order of bits clocked into hmc542.
...
Fixes #993 .
2018-05-05 03:12:25 +00:00
whitequark
fd2b8d5f8f
firmware: raise hmc542 log level to INFO.
2018-05-05 02:59:49 +00:00
whitequark
9704fb837f
firmware: fix warnings in ad9154 driver.
2018-05-05 01:55:42 +00:00
whitequark
8a70c18d1e
firmware: add debug output to hmc542 driver.
2018-05-05 01:53:30 +00:00
Florent Kermarrec
4e2d9abaf7
firmware/ad9154: combine analog and digital delay of hmc7043 for sysref scan
2018-04-27 14:32:03 +02:00
Florent Kermarrec
3802c7badb
firmware/ad9154: add sysref scan/conf for jesd sc1
2018-04-27 13:20:20 +02:00
Florent Kermarrec
fe689ab4f2
firmware/serwb: add link test, use info! instead of debug! for link settings (useful to analyze logs from others boards)
2018-04-17 19:24:22 +02:00
Robert Jördens
3abb378fbe
i2c: unused variable
2018-03-20 09:56:26 +00:00
whitequark
c86df8e13e
firmware: try to unstuck the I2C bus if it gets stuck.
...
Fixes #957 .
2018-03-19 06:23:23 +00:00
Sebastien Bourdeauducq
916197c4d7
siphaser: cleanup
2018-03-07 11:15:44 +08:00
Sebastien Bourdeauducq
74d1df3ff0
firmware: implement si5324 skew calibration
2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq
e6e5236ce2
firmware: fix si5324 select_recovered_clock
2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq
c34d00cbc9
drtio: implement Si5324 phaser gateware and partial firmware support
2018-03-07 10:57:30 +08:00
Robert Jördens
257bef0d21
slave_fpga: print more info
2018-03-06 14:26:26 +01:00
Robert Jördens
1c57d27ae2
slave_fpga: use sayma_rtm magic
2018-03-01 18:32:19 +01:00
Robert Jördens
abd160d143
slave_fpga: check DONE before loading
2018-03-01 19:53:34 +08:00
Robert Jördens
a04a36ee36
firmware: move wait for write completion to read()
2018-03-01 11:37:33 +01:00
Robert Jördens
a6ae08d8b8
firmware/spi: work around cs_polarity semantics
...
The semantics differ between the RTIO and CSR interface.
2018-03-01 11:19:18 +01:00
Robert Jördens
6fbe0d8ed8
hmc830: be explicit about SPI mode selection
2018-03-01 11:19:18 +01:00
Robert Jördens
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
Robert Jördens
68278e225d
slave_fpga: check for INIT low
2018-03-01 17:28:01 +08:00
whitequark
14f6fa6699
firmware: fix a warning.
2018-03-01 01:25:55 +00:00
whitequark
d051cec0dd
firmware: remove useless module.
2018-03-01 01:22:52 +00:00
Robert Jördens
0c49201be7
firmware: add slave fpga serial load support
...
based on whitequark's work in f95fb27
m-labs/artiq#813
2018-02-28 19:27:52 +01:00
Robert Jördens
cedecc3030
Revert "firmware: Sayma RTM FPGA bitstream loading prototype ( #813 )."
...
This reverts commit f95fb273f1
.
Will be replaced with a bitbang/GPIO based version.
2018-02-28 18:43:56 +01:00
whitequark
f95fb273f1
firmware: Sayma RTM FPGA bitstream loading prototype ( #813 ).
2018-02-28 16:46:23 +00:00
Robert Jördens
c87636ed2b
si5324: fix cfb21ca
2018-02-18 11:38:20 +01:00
Sebastien Bourdeauducq
cfb21ca126
si5324: fix usage of external CLKIN2 reference
2018-02-17 13:52:01 +08:00
Sebastien Bourdeauducq
fb8b36cd41
clean up ccc279b8
2018-02-17 12:10:46 +08:00