3844cde97b
jsonschema: validate hw_dev depending on target
2021-02-12 11:09:01 +08:00
22ce5b0299
eem: fix Urukul QSPI after 9ef5717de8
2021-02-12 10:59:53 +08:00
Etienne Wodey
af411de639
tools/file_import: simplify, remove deprecated load_module() call
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2021-02-10 16:03:31 +08:00
e54dd08821
metlino,sayma: adapt to new EEM API
...
This also enables 4X SERDES TTLs.
2021-02-10 15:32:10 +08:00
547254e89e
eem_7series: pass through kwargs
2021-02-10 15:31:49 +08:00
49299c00a9
eem: enable DCI for LVDS TTL
2021-02-10 15:31:25 +08:00
9ef5717de8
eem: support different I/O standards in EEM slots
2021-02-10 15:31:05 +08:00
Drew
48a1c305c1
master: fix DeprecationWarning on logger.warn
...
Resolves error message shown.
The following error message is shown when worker_impl.py:199 is run:
```
WARNING:worker(RID,EXPERIMENT):py.warnings:/nix/store/77sw4p03cb7rdayx86agi4yqxh5wq46b-python3.7-artiq-5.7141.1b68906/lib/python3.7/site-packages/artiq/master/worker_impl.py:199: DeprecationWarning: The 'warn' function is deprecated, use 'warning' instead
logging.warn(message)
```
2021-02-10 15:27:22 +08:00
461199b903
kasli_generic: warn if min_artiq_version is not met
2021-02-10 15:26:15 +08:00
4b2ed67dd7
coredevice_generic.schema.json: add "min_artiq_version"
2021-02-10 15:26:15 +08:00
cf9cf0ab6f
ttl_serdes_7series: add dci (HP bank) support
2021-02-07 22:32:18 +08:00
997a48fb31
ttl_serdes_ultrascale: fix, add dummy dci argument
2021-02-07 22:31:46 +08:00
bbe0c9162a
ttl_serdes_ultrascale: cleanup
2021-02-07 22:00:33 +08:00
3572e2a9c7
ttl_serdes_7series: fix
2021-02-07 21:41:13 +08:00
88c212b84f
ttl_serdes_7series: cleanup
2021-02-07 21:33:21 +08:00
db25f4e8f7
ttl_serdes_7series: use simpler I/O buffers
...
In theory equivalent with these parameters.
2021-02-07 20:10:37 +08:00
6bd9691ba8
gateware: remove TTL dead code
2021-02-07 19:58:02 +08:00
bfacd1e5b3
eem: fix Grabber cc_0-2 signal definitions
2021-02-07 18:01:05 +08:00
f7a33a1f99
gateware: make 7-series EEM handling functions shareable
2021-02-07 14:34:26 +08:00
1213f78ee9
jsonschema: support kasli_soc
2021-02-07 13:39:01 +08:00
2f5ea67b69
Merge pull request #1596 from airwoodix/fix-adf5356-init
...
coredevice/adf5356: fix initial device detection
2021-02-02 18:20:08 +01:00
Etienne Wodey
d691b05d78
coredevice/mirny: better error handling for clk_sel
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2021-02-02 16:23:47 +01:00
Etienne Wodey
78e1b9f8e5
sinara_tester/mirny: remove hw_rev checking fixup code
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2021-01-29 18:47:40 +01:00
Etienne Wodey
6f8e788620
coredevice/mirny: support human readable clk_sel
...
In init(), read hw_rev to derive clk_sel code from user string.
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2021-01-29 18:46:47 +01:00
Etienne Wodey
a8bc98a77b
coredevice/adf5356: fix initial device detection
...
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
2021-01-28 18:29:40 +01:00
David Nadlinger
f9872bb7b8
coredevice: Handle prematurely closed sockets in comm_kernel receive loop
...
recv() returns 0 instead of data if the socket has already
been closed. This is translated into a zero-length list on
the Python layer. Previously, the code would enter an
infinite loop if the socket was closed while attempting
to receive data.
2021-01-26 18:10:49 +08:00
David Nadlinger
f1fd42ea98
coredevice: Re-enable TCP keepalive
...
This partially reverts commit b5e1bd3fa2#1150 ), even though this
should be a non-issue now due to the larger ARP cache.
2021-01-26 18:10:49 +08:00
8148fdb8a7
use device endian for core device protocols ( #1591 )
2021-01-22 16:33:21 +08:00
David Nadlinger
1e443a3aea
coredevice: Reuse Target.little_endian for protocol endianness [nfc]
2021-01-21 09:11:54 +01:00
ec72eeda46
coredevice: use device endian for kernel and RPC
2021-01-21 09:07:48 +01:00
3832b261b1
firmware: optimize integer array/list rpc
2021-01-21 09:05:17 +01:00
David Nadlinger
c229e76d07
compiler: Add accidentally omitted note to invalid RPC type diagnostic
...
Might be a minor quality-of-life employment, but there
isn't a test case for this anyway.
2021-01-20 01:49:16 +01:00
261870bdee
phaser: fix oscillator rtio address for even base addresses
...
close #1580
2021-01-19 16:56:50 +01:00
David Nadlinger
f11aef74b4
gui: Add context menu entry to close all applets
...
This is occasionally very useful if a large number of
applets were left open (e.g. spawned via CCB).
2021-01-17 11:56:03 +01:00
c675488a99
reorganize JSON schema files
2021-01-16 10:43:14 +08:00
c6807f4594
kasli_generic: validate description against schema, use defaults from schema
2021-01-16 10:35:23 +08:00
45b5cfce05
gateware: add a kasli_generic.schema.json
2021-01-16 10:35:23 +08:00
David Nadlinger
9b39b1e328
test: Add coredevice tests for matrix multiplication
...
Also includes a regression test specifically for
mixing multiple types in one kernel.
2021-01-12 03:02:07 +01:00
David Nadlinger
f0284b2549
compiler: Fix collision of environments in matmult implementations
...
GitHub: Fixes #1578 .
2021-01-12 03:02:07 +01:00
David Nadlinger
362f8ecb69
compiler: Add test for disallowing type-unstable array-assign binops
2021-01-12 03:02:07 +01:00
David Nadlinger
96692791cf
compiler: Implement assigning binops for arrays
...
GitHub: Fixes #1579 .
2021-01-12 03:02:07 +01:00
5b5db1433b
Revert "compiler: enabled vectorize option"
...
This reverts commit 636898c302
2021-01-11 19:43:12 +08:00
636898c302
compiler: enabled vectorize option
2021-01-11 16:31:24 +08:00
6a5f5088e2
frontend: sinara_tester: add mirny test
...
Signed-off-by: Oi Chee Cheung <dc@m-labs.hk>
2021-01-05 17:01:01 +08:00
43be383c86
kasli v2.0: drive TX_DISABLE low on all SFPs ( fixes #1570 )
...
This was the same problem as #1508 but on SFP1..3
2020-12-23 00:10:12 +08:00
43ecb3fea6
sayma: add comments about CPLL line rate on KU GTH
2020-12-19 17:05:20 +08:00
8cd794e9f4
jesd204_tools: use new syntax from jesd204b core
...
* requires jesd204b changes as in https://github.com/HarryMakes/jesd204b/tree/gth
2020-12-19 17:05:20 +08:00
Aadit Rahul Kamat
19f75f1cfd
artiq_browser: update h5py api call
...
Signed-off-by: Aadit Rahul Kamat <aadit.k12@gmail.com>
2020-12-17 14:23:16 +08:00
a017dafee6
ddb_template: mirny_cpld: add default value
...
Signed-off-by: Oi Chee Cheung <dc@m-labs.hk>
2020-12-15 11:00:59 +08:00
73271600a1
jdcg: STPL tests now perform after DAC initialization
2020-12-14 18:03:31 +08:00
