M-Labs
/
artiq
mirror of https://github.com/m-labs/artiq.git
2
0
Fork 1
Code Issues Projects Releases Wiki Activity
8,045 Commits 13 Branches 35 Tags 27 MiB
Commit Graph

850 Commits

Author SHA1 Message Date
Robert Jördens a4997c56cf ad9910: simplify edge detection logic 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-09 18:54:34 +00:00
Robert Jördens 14b6b63916 ad9910: rewire io_delay tuning 
This now reliably locates the SYNC_CLK-IO_UPDATE edge by doing two
scans at different delays between start and stop IO_UPDATE.
It also works well when one delay is very close to the edge.
And it correctly identifies which (start or stop) pulse hit or crossed
the SYNC_CLK edge.

for #1143

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-09 18:38:27 +00:00
Robert Jördens 38c6878d49 urukul: mention min/max attenuation 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-09 13:32:05 +01:00
Robert Jördens e565ca6b82 urukul: slow down att write to datasheet limit 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-09 13:23:06 +01:00
Robert Jördens 998be50f07 urukul: handle MSB in att_reg 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-09 13:21:14 +01:00
Sebastien Bourdeauducq c990b5e4f1 Merge remote-tracking branch 'origin/master' into new 2018-11-08 20:21:56 +08:00
Sebastien Bourdeauducq 0bee43aa58 sawg: use new rtio_output() API 2018-11-08 20:16:30 +08:00
Sebastien Bourdeauducq bec25cbaa0 suservo: use new rtio_output() API 2018-11-08 20:13:14 +08:00
Sebastien Bourdeauducq e8d58b35b4 spi2: use new rtio_output() API 2018-11-08 20:12:30 +08:00
Sebastien Bourdeauducq d18546550e grabber: use new rtio_output() API 2018-11-08 19:15:50 +08:00
Sebastien Bourdeauducq 2549e623c1 ad9914: use new rtio_output() API 2018-11-08 19:15:44 +08:00
Sebastien Bourdeauducq 8caea0e6d3 gateware,runtime: optimize RTIO kernel interface further 
* now pinning (TODO: atomicity)
* for inputs, merge request and timeout registers
 2018-11-08 18:29:24 +08:00
Sebastien Bourdeauducq fae95e73ad ttl: use optimized rtio_output API 2018-11-07 23:41:43 +08:00
Sebastien Bourdeauducq 3d0c3cc1cf gateware,runtime: optimize RTIO output interface 
* reduce address to 8 bits
* merge core, channel and address into 32-bit pre-computable "target"
* merge we register into data register
 2018-11-07 23:39:58 +08:00
Robert Jördens e6efe830c4 ad9910: rewire sync delay tuning 
* search from wide window end
* decouple margins and minimum window size
* add note about kasli jitter

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-07 14:52:03 +00:00
Sebastien Bourdeauducq ad0254c17b Merge branch 'switching125' into new 2018-11-07 22:03:18 +08:00
Robert Jördens 6c00ab57c0 test_ad9910: relax SYNC window 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-06 19:31:38 +01:00
Robert Jördens 172633c7da test_ad9910: default to a useful seed 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-06 17:35:57 +01:00
Robert Jördens 0b2661a34d ad9910: robustify SYNC window finding 
don't integrate too long, find the window tip fast and early
a couple 100 SYNC pulses are sufficient

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-06 12:41:21 +00:00
Robert Jördens 31f68ddf6c Merge branch 'urukul-sync' 
* urukul-sync: (29 commits)
  urukul: flake8 [nfc]
  ad9910: flake8 [nfc]
  urukul/ad9910 test: remove unused import
  test_urukul: relax speed
  urukul,ad9910: print speed metrics
  kasli: add PTB2 (external clock and SYNC)
  kasli: add sync to LUH, HUB, Opticlock
  kasli_tester: urukul0 mmcx clock defunct
  test_ad9910: relax ifc mode read
  tests: add Urukul-AD9910 HITL unittests including SYNC
  ad9910: add init bit explanation
  test: add Urukul CPLD HITL tests
  ad9910: fiducial timestamp for tracking phase mode
  ad9910: add phase modes
  ad9910: fix pll timeout loop
  tester: add urukul sync
  ptb: back out urukul-sync
  ad9910: add IO_UPDATE alignment and tuning
  urukul: set up sync_in generator
  ad9910: add io_update alignment measurement
  ...

close #1143
 2018-11-05 19:54:30 +01:00
Robert Jördens 6fb18270a2 urukul: flake8 [nfc] 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:45:24 +01:00
Robert Jördens 832690af9a ad9910: flake8 [nfc] 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:44:51 +01:00
Robert Jördens 9fb850ae75 ad9910: add init bit explanation 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:37:02 +01:00
Robert Jördens bc04da15c5 test: add Urukul CPLD HITL tests 
for #1143

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:37:00 +01:00
Robert Jördens 141cc7d99f ad9910: fiducial timestamp for tracking phase mode 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:58 +01:00
Robert Jördens 2f6d3f79ff ad9910: add phase modes 
* simplified and cross-referenced the explanation of the different
  phase modes.
* semantically and functionally merged absolute and tracking/coherent
  phase modes.
* simplified numerics to calculate phase correction
* added warning about possible inconsistency with DMA and default
  phase mode
* restricted __all__ imports
* moved continuous/relative phase offset tracking from an instance
  variable to a "handle" returned by set()/set_mu() in order to avoid
  state inconsistency with DMA (#1113 #1115)

for #1143

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:55 +01:00
Robert Jördens d3ad2b7633 ad9910: fix pll timeout loop 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:53 +01:00
Robert Jördens 06139c0f4d ad9910: add IO_UPDATE alignment and tuning 
for #1143

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:48 +01:00
Robert Jördens 1066430fa8 urukul: set up sync_in generator 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:46 +01:00
Robert Jördens 4bbd833cfe ad9910: add io_update alignment measurement 
for #1143

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:44 +01:00
Robert Jördens 7b92282012 ad9910: add docs for sync tuning, refactor 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:42 +01:00
Robert Jördens 8a47a6b2fb ad9910: disable sync_clk output 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:40 +01:00
Robert Jördens 65e2ebf960 ad9910: add sync delay control, auto tuning 
* expose multi device sync functionality
* sync delay configuration interface
* auto-tuning of sync delay from device_db seed

for #1143

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:37 +01:00
Robert Jördens 8dbf5f87fd ad9910: simplify io_update pulsing on init, set_mu 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:35 +01:00
Robert Jördens 0b3b07a7da ad9910: add power down method 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:34 +01:00
Robert Jördens 0433e8f4fe urukul: add sync_in generator 
for #1143

Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:30 +01:00
Robert Jördens f62c1ff0bb TTLClockGen: expose acc_width 
Signed-off-by: Robert Jördens <rj@quartiq.de>
 2018-11-05 19:36:27 +01:00
David Nadlinger f79b9d9e1e ttl: Expand input gate/count API docstrings 2018-11-03 20:33:19 +08:00
David Nadlinger 5d2e3f975f coredevice: Add get_rtio_counter_mu() docstring [nfc] 2018-11-03 20:33:19 +08:00
David Nadlinger d6fcc0529f coredevice: Imperative mood in docstrings [nfc] 
This follows Python conventions (PEP257) and unifies the style with
other comments.
 2018-11-03 20:33:19 +08:00
David Nadlinger cbdef0225c ttl: Add target RTIO time argument to timestamp/count functions 
Software-based tracking of timestamps is problematic (e.g. when
using DMA, see GitHub #1113).
 2018-11-03 20:33:19 +08:00
David Nadlinger 2a0e1dabfb ttl: Remove unused attribute [nfc] 2018-11-03 20:33:19 +08:00
David Nadlinger 17a5fb2dce ttl: Remove error-prone sync() calls 
These methods are problematic, as with DMA in the picture, the
timestamp member variables did not necessarily reflect the last
submitted event timestamp (see GitHub #1113).

sync() is only very rarely used in typical experimental code, so
the methods are removed without a transition period.
Core.wait_until() can be used to busy-wait for a specified RTIO
timestamp value on the core device CPU instead.
 2018-11-03 20:33:19 +08:00
David Nadlinger 11e8c9d5f7 coredevice: Add Core.wait_until_mu() 
(This supersedes TTLOut.sync(), see see GitHub #1113.)
 2018-11-03 20:33:19 +08:00
David Nadlinger cbfbe24d7a ttl: Remove broken TTLClockGen.sync 
The code currently doesn't compile because of a typo in the timestamp
field name. However, tracking event timestamps in software is
problematic anyway (e.g. with DMA, see GitHub #1113), so just remove
`sync()` altogether.
 2018-11-03 20:33:19 +08:00
Robert Jördens 89a961fb00 urukul, ad9912, ad9910: expose CFG RF switch better 
* conincident setting of multiple switches
* per channel setting
 2018-10-24 13:04:46 +02:00
Robert Jördens 661dd00c4c ad9912: phase offset is 14 bit LSB aligned 
c.f. sinara-hw/Urukul#15
 2018-10-11 15:16:08 +02:00
hartytp 08074d5275 Urukul: add support for hardware v1.3 clocking options 2018-10-10 09:26:35 +02:00
hartytp 1a1b454ed9 Urukul: flake8 (NFC) 2018-10-08 10:09:49 +01:00
hartytp 9a509e5070 Zotino: increase delay after register read in init method to avoid underflows 2018-10-06 21:45:17 +08:00
Sebastien Bourdeauducq 969a305c5a Merge branch 'master' into switching125 2018-10-04 10:08:42 +08:00
Sebastien Bourdeauducq c71e442929 documentation improvements 
Based on PR #1101 by @drewrisinger
 2018-09-26 12:12:37 +08:00
Sebastien Bourdeauducq c8cd830118 drtio: implement get_rtio_destination_status for kernels 2018-09-15 19:11:22 +08:00
Sebastien Bourdeauducq d38755feff drtio: implement destination state checks on operations 2018-09-15 15:55:45 +08:00
Sebastien Bourdeauducq 95432a4ac1 drtio: remove old debugging features 2018-09-12 13:01:27 +08:00
whitequark a74958f01f ksupport: raise RuntimeError on reraise with no inflight exception. 
Fixes #1123.
 2018-08-07 05:53:13 +00:00
Chris Ballance 6fc8439399 tweak moninj to allow old dashboard with new firmware 2018-08-02 19:34:14 +08:00
Chris Ballance 47740c8930 share moninj injection state between dashboards 
Previously if one dashboard overrode a channel this was not visible on
any other dashboard - the channel appeared to operate normally.
 2018-08-02 19:34:14 +08:00
Robert Jördens 7d6a1b528d ad9912: add ftw_to_frequency 2018-08-02 11:19:12 +00:00
Robert Jördens e518a1f1d0 ad53xx: also increase slack after control readback 2018-08-02 11:19:12 +00:00
David Nadlinger 08ee91beb2 ad9910: Clarify chip_select range [nfc] 
`assert 3 <= chip_select <= 7` is rather opaque without looking
at the CPLD source code otherwise.
 2018-07-30 11:08:17 +01:00
David Nadlinger 6b89106578 ad53xx: Avoid sporadic RTIOUnderflow in init() 
I observed sporadic RTIO underflows on Kasli before, by ~2.5 µs,
so 5 µs extra slack should be plenty. No underflows since.
 2018-07-28 23:45:48 +01:00
Sebastien Bourdeauducq fb96c1140e grabber: add coredevice driver 2018-07-24 18:06:44 +08:00
Sebastien Bourdeauducq cab0ba408d fmcdio_vhdci_eem: cleanup and document 2018-07-20 09:57:03 +08:00
Sebastien Bourdeauducq 8dfcd463aa fmcdio_vhdci_eem: naming consistency 2018-07-19 15:46:04 +08:00
Sebastien Bourdeauducq fe93a454d6 fmcdio_vhdci_eem: fix direction shift register permutation and polarity 2018-07-19 15:16:21 +08:00
Sebastien Bourdeauducq 8b9a8be12a fmcdio_vhdci_eem: add dirctl word computation functions 2018-07-17 23:27:29 +08:00
Sebastien Bourdeauducq d4d12e264d fmcdio_vhdci_eem: refactor 
This allows access to the pin allocation from kernels, which becomes useful
to configure the direction shift register.
 2018-07-17 20:13:59 +08:00
Sebastien Bourdeauducq b27fa8964b add variant in identifier string 
Also add without-sawg suffixes on Sayma.

Closes #1060
Closes #1059
 2018-07-15 17:21:17 +08:00
whitequark 12fde6d34b artiq_coremgmt: fix typo. 
Fixes #1056.
 2018-06-23 00:36:59 +00:00
Robert Jördens 21a48711ec i2c: refactor common operations 2018-06-18 09:34:09 +00:00
Robert Jördens f9910ab242 i2c: support selecting multiple or no channels 
closes #1054
 2018-06-15 19:36:37 +02:00
Robert Jördens 735e4e8561 pcu: spelling 2018-06-08 14:39:22 +00:00
Robert Jördens 38971d130a comm_analyzer: fix data without any spi reads 
closes #1050
 2018-06-06 12:21:42 +02:00
Robert Jördens 5de2d06568 ad53xx/zotino: do not clear power down on overtemp 2018-06-01 13:17:13 +00:00
Robert Jördens 2c344686d9 ad53xx/zotino: enable overtemp shutdown and readback control 2018-06-01 13:06:52 +00:00
Robert Jördens 87d3ac9d25 suservo: swap transfer function parametrization 
The integrator is now parametrized through its gain and not the PI
corner frequency. The integrator gain limit is given in absolute gain
units and not relative to the proportional gain.

close #1033
 2018-06-01 09:38:18 +00:00
Sebastien Bourdeauducq e408241233 sawg: work around compiler not accepting delay_mu(int32) 2018-06-01 15:42:37 +08:00
Sebastien Bourdeauducq f5d55c6902 sawg: add 1 coarse RTIO cycle between spline resets 
This keeps all events in the same SED lane and limits the number of SED lanes required.

Closes #1038
 2018-06-01 15:15:24 +08:00
Robert Jördens 22506e849f suservo: clarify timings 
close #1027
 2018-06-01 06:35:38 +00:00
Robert Jördens a42f774440 suservo: document offset range limits 
close #1034
 2018-05-31 16:55:44 +00:00
Robert Jördens 36dcea3edf suservo: refactor y_mu_to_full_scale as portable 
close #1032
 2018-05-31 16:44:14 +00:00
Robert Jördens e136709cac suservo: document gain state 
close #1030
 2018-05-31 16:36:53 +00:00
Robert Jördens 5dbdc5650c suservo: document set_config and get_status more 
close #1028
 2018-05-31 16:32:05 +00:00
Robert Jördens e1b0fcc24e suservo: add documentation on settings and setup 
close #1015
 2018-05-31 16:21:09 +00:00
Robert Jördens 4e863b32a1 coredevice: configurable initial backing state 
Several core device drivers maintain a copy of some device state.
Since this copy is not transferred between experiments this backing state
can be different from device state when a new experiment is started.

This commit adds support for injecting initial backing state into
experiments via the device database and sets initial backing state where
known.

ad53xx (zotino): spi2 xfer_duration
novogorny: pgia gains
sampler: pgia gains, spi2 pgia and adc xfer_duration
suservo: pgia gains, spi2 pgia xfer_duration
urukul: cpld cfg (partial: rf_sw), attenuator register
spi2: div/length for xfer_duration

close #1003
 2018-05-21 18:55:06 +02:00
Sebastien Bourdeauducq 8513f0b0d4 minor cleanup 2018-05-21 15:35:00 +08:00
Sebastien Bourdeauducq b10d3ee4b4 make RTIO clock switch optional and simplify 
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
 2018-05-18 17:41:34 +08:00
Robert Jördens bfff755295 urukul: do IO_RST also when blind 2018-05-17 14:48:49 +00:00
whitequark 31c6c79204 firmware: implement an edge profiler. 
It doesn't work extremely well, and the results can be somewhat
confusing, and it needs a libunwind patch, but it's the best I could
do and it seems still useful.
 2018-05-16 21:53:53 +00:00
Robert Jördens 99f7672c79 ad53xx: tweak spi readback 2018-05-16 19:08:27 +02:00
whitequark 4d06c1d84b coredevice.CommKernel: modernize. NFC. 2018-05-16 14:40:14 +00:00
whitequark ca93b94aea firmware: move config requests to management protocol. 
They were only in session protocol because of historical reasons.
 2018-05-16 14:32:49 +00:00
whitequark a39f8d6634 artiq_devtool: use CommMgmt instead of shelling out to artiq_coremgmt. 
(Which no longer exists.)

This also fixes `artiq_devtool hotswap` to work without
an `artiq_devtool connect` running in background.
 2018-05-16 14:08:32 +00:00
whitequark d446a3293e frontend: merge core{config,log,boot,debug,profile} into coremgmt. 2018-05-16 14:08:32 +00:00
Robert Jördens a100c73dfe suservo: support pure-I 2018-05-14 18:48:27 +00:00
Sebastien Bourdeauducq e121a81f21 ad9914: fix frequency_to_xftw and xftw_to_frequency 2018-05-14 23:49:00 +08:00
Sebastien Bourdeauducq 80df86f700 ad9914: set_mu_x -> set_x_mu 2018-05-14 23:49:00 +08:00
Robert Jördens 4ddb29fa02 suservo: document class arguments 2018-05-14 15:22:47 +02:00
Robert Jördens 504d37b66b suservo: add SI units functions and document 
m-labs/artiq#788
 2018-05-14 12:26:49 +00:00
Robert Jördens 4993ceec35 sampler: unroll conversion for speed 2018-05-14 12:26:49 +00:00
Sebastien Bourdeauducq ba1d137d19 ad9914: fix FTW write in regular resolution mode 2018-05-14 18:47:23 +08:00
Sebastien Bourdeauducq b04c7abde8 ad9914: fix kernel_invariants 2018-05-14 14:02:11 +08:00
Sebastien Bourdeauducq 56a18682a7 ad9914: minor fixes 2018-05-14 10:37:50 +08:00
Sebastien Bourdeauducq 194d6462ee ad9914: fix set_mu 2018-05-14 00:19:09 +08:00
hartytp 00cb31b804 sampler: remove v_ref parameter (#988) 2018-05-13 18:00:57 +02:00
Sebastien Bourdeauducq 3027951dd8 integrate new AD9914 driver 
moninj, analyzer, docs, examples, tests.
 2018-05-13 23:29:35 +08:00
Sebastien Bourdeauducq 663d8e66ba ad9914: optimize extended-resolution mode 2018-05-13 23:01:06 +08:00
Sebastien Bourdeauducq c8d91b297d coredevice: add new ad9914 driver 2018-05-13 22:30:33 +08:00
Robert Jördens f055bf88f6 suservo: add clip flags (#992) 2018-05-09 07:16:15 +00:00
whitequark b1d349cc1b firmware: implement a sampling profiler. 
Does not yet support constructing call graphs.
 2018-05-05 00:44:40 +00:00
Robert Jördens ae80bab180 urukul: reg based io-update is a kernel 2018-04-27 16:42:09 +00:00
Robert Jördens 5f00326c65 suservo: coeff mem write port READ_FIRST 2018-04-27 15:43:32 +00:00
Robert Jördens 73fa572275 suservo: documentation, small API changes 2018-04-27 16:53:22 +02:00
Robert Jördens 307cd07b9d suservo: lots of gateware/ runtime changes 
tested/validated:

* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback

individual changes below:

suservo: correct rtio readback

suservo: example, device_db [wip]

suservo: change rtio channel layout

suservo: mem ports in rio domain

suservo: sck clocked from rio_phy

suservo: cleanup, straighten out timing

suservo: dds cs polarity

suservo: simplify pipeline

suservo: drop unused eem names

suservo: decouple adc SR from IIR

suservo: expand coredevice layer

suservo: start the correct stage

suservo: actually load ctrl

suservo: refactor/tweak adc timing

suservo: implement cpld and dds init
 2018-04-27 13:50:26 +02:00
Robert Jördens 01f762a8f5 urukul/ad9910: support blind init 
urukul: always set io_update attribute
to silence compiler warning w.r.t. kernel_invariants
 2018-04-27 13:48:40 +02:00
Robert Jördens edbc7763e0 urukul: allow no io_update_device 2018-04-25 17:32:36 +00:00
Sebastien Bourdeauducq c47d3ec8c8 zotino: use None as default for ldac and clr 
This is also what AD53xx does.
 2018-04-22 15:03:01 +08:00
whitequark 3b054855ec firmware: add allocator debug feature, invoked by artiq_coredebug frontend. 2018-04-21 19:39:46 +00:00
Sebastien Bourdeauducq 5ca59467fd ad53xx: make LDAC and CLR optional 2018-03-26 22:45:01 +08:00
Robert Jördens a8f0ee1c86 ad53xx: refactor offset_to_mu(), fix docs 2018-03-24 15:45:42 +01:00
Robert Jördens b0c8097025 ad53xx: remove channel index AND 
It's incorrect since it doesn't respect the number of channels
of any of those chips (none has 64 channels).
 2018-03-24 15:39:06 +01:00
Robert Jördens 77bcc2c78f zotino: style, use attributes to set SPI config 2018-03-24 15:37:34 +01:00
Robert Jördens 2cf414a480 ad53xx: move 8 bit shift out of ad53xx protocol funcs 
That's specific to the SPI bus, not to the ad53xx.
 2018-03-24 15:15:56 +01:00
Robert Jördens 08326c5727 ad53xx: style [nfc] 2018-03-24 14:10:20 +01:00
hartytp a992a672d9 coredevice/zotino: add (#969) 
* Replace ad5360 driver with a ad53xx driver, designed to have a nicer interface
Add Zotino driver and add to opticlock target for Kasli
Test Zotino on hw:
 - Verify all timings on the hardware with a scope
 - Verify that we can correctly set and read back all registers in a loop (checks for SI and driver issues)
 - check we can set LEDs correctly
 - check calibration routine + all si unit functions with a good DVM
 - look at DAC transitions on a scope (while triggering of a TTL) on persist to check there are no LDAC glitches etc
To do: update examples and e.g. KC705 device db.
 2018-03-24 13:41:18 +01:00
Robert Jördens 770b0a7b79 novogorny: conv -> cnv 
* parity with sampler
* also add novogorny device to opticlock
 2018-03-21 18:38:42 +00:00
Robert Jördens 82c4f0eed4 sampler: fix channel gain retrieval 2018-03-21 14:22:13 +01:00
Robert Jördens 97918447a3 sampler: add coredevice driver 2018-03-21 12:21:53 +00:00
Robert Jördens 80903cead7 novogorny: streamline gain setting method, style [nfc] 2018-03-21 08:53:26 +00:00
Robert Jördens 9ad1fd8f25 urukul: add comment and doc about the AD9910 MASTER_RESET 2018-03-20 17:40:03 +01:00
Robert Jördens f17c0abfe4 urukul: don't pulse DDS_RST on init 
closes m-labs/artiq#940

Apparently, if the DDS are reset, every other time they don't work
properly.
 2018-03-20 16:10:26 +00:00
Robert Jördens a185e8dc52 urukul: fix MASK_NU offset 2018-03-20 16:10:11 +00:00
hartytp a27b5d88c2 Novogorny driver, remove unused imports (#964) 
* Novogorny driver, remove unused imports

* more unused imports

* oops, one final one!
 2018-03-19 11:58:14 +01:00
Robert Jördens f39b7b33e8 ad5360: whitespace [nfc] 2018-03-17 18:51:17 +01:00
ion c1439bfd3b Fix AD5360 after migration to SPI2 2018-03-17 11:37:11 +00:00
Robert Jördens a04bd5a4fd spi2: xfers take one more cycle until ~busy 2018-03-09 20:48:17 +01:00
Robert Jördens 37ec97eb28 ad9910/2: add sw invariant only when passed 2018-03-07 21:32:59 +01:00
Robert Jördens f4dad87fd9 coredevice: add pcf8574a driver 
I2C IO expander with 8 quasi-bidirectional pins
 2018-03-06 14:27:19 +01:00
Sebastien Bourdeauducq 432e61bbb4 drtio: add kernel API to check for link status. Closes #941 2018-03-05 00:23:55 +08:00
Sebastien Bourdeauducq 928d5dc9b3 drtio: raise RTIOLinkError if operation fails due to link lost (#942) 2018-03-04 01:02:53 +08:00
Sebastien Bourdeauducq abfbadebb5 doc: DMA can also raise RTIOUnderflow 2018-03-03 13:14:34 +08:00
Robert Jördens cc70578f1f remove old spi RTIO Phy 2018-03-01 11:19:18 +01:00
Robert Jördens a7720d05cd firmware, sayma: port converter_spi to spi2 
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
 2018-03-01 11:19:18 +01:00
Robert Jördens 5046d6a529 ad9912/10: add a bit more slack to init() 2018-02-27 23:14:44 +01:00
Robert Jördens b466a569bf coredevice: export spi2 2018-02-24 09:49:31 +01:00
Robert Jördens cff85ee13b novogorny: simplify and fix coefficient 2018-02-23 10:09:44 +01:00
Robert Jördens bc5e949bb4 novogorny: fix gain register length 2018-02-22 18:45:55 +00:00
Robert Jördens 1452cd7447 novogorny: add coredevice driver and test with Kasli 
m-labs/artiq#687
 2018-02-22 17:19:51 +01:00
Robert Jördens 74517107f0 ad9912: add slack after prodid read 2018-02-22 17:19:51 +01:00
Robert Jördens e8d4db1ccf coreanalyzer: add spi2 support 
m-labs/artiq#926
 2018-02-22 11:28:46 +01:00
Robert Jördens f8e6b4f4e3 ad5360: port to spi2 
* kc705 nist_clock target gateware
* coredevice driver
* moninj code
* test/example/device_db

This is untested as we don't have a AD5360 board right now.
Will be tested with Zotino v1.1

m-labs/artiq#926
 2018-02-22 10:25:46 +01:00
Robert Jördens 898bad5abc spi2: fixes 2018-02-21 19:41:05 +01:00
Robert Jördens a63fd306af urukul: use spi2 
* switch kc705 and kasli targets to spi2 gateware on urukul
* rewrite urukul, ad9912, ad9910
* update example experiments, device_dbs
 2018-02-21 15:00:28 +00:00
Robert Jördens 37a0d6580b spi2: add RTIO gateware and coredevice driver 
1006218997
 2018-02-21 13:37:36 +00:00
Sebastien Bourdeauducq 4b4090518b drtio: clean up remnants of removed debug functions 2018-02-19 15:14:32 +08:00
Robert Jördens caedcd5a15 ad9912: cleanup, document init() 2018-02-18 11:38:16 +01:00
Robert Jördens 75c89422c9 ad991[02]: sysclk can be 1 GHz 2018-02-18 10:29:19 +00:00
Robert Jördens 2adba3ed33 urukul: document ad9912, and cpld, fix api 2018-02-14 09:45:17 +01:00
Robert Jördens ede98679fc ad9910: add documentation 2018-02-14 09:05:03 +01:00
Robert Jördens 7f1bfddeda ad9910: tweak spi timing for higher speed 2018-02-13 22:13:40 +01:00
Robert Jördens 6a6695924f urukul: proto 8 2018-02-13 22:13:40 +01:00
Robert Jördens bc6af03a61 urukul: (proto 7) drop att_le 2018-02-13 22:13:40 +01:00
Robert Jördens 5a9035b122 urukul: faster spi clock 2018-01-22 18:27:40 +00:00
Robert Jördens ca1fdaa190 ad9910: relax timing for faster spi clock 2018-01-22 18:27:40 +00:00
Sebastien Bourdeauducq dc593ec0f0 Merge branch 'rtio-sed' into sed-merge 2018-01-10 12:04:54 +08:00
Robert Jördens 67746cc7a0 urukul: raise instead of assert, clean up 2018-01-03 19:22:36 +00:00
Robert Jördens eae7584432 ad9910: add [wip] 2018-01-03 18:43:04 +00:00
Robert Jördens 7ac809f8b3 urukul: do io reset 2018-01-03 18:43:04 +00:00
Robert Jördens 28a3ee7e61 urukul: make STA reading robust, add io_rst(), clean up 2018-01-03 18:43:04 +00:00
Robert Jördens cef40eef43 ad9912: clean up 2018-01-03 18:43:04 +00:00
Robert Jördens d8dbab024d urukul: don't deal with dds_reset for now 2018-01-03 18:43:04 +00:00
Robert Jördens a940550e47 urukul: add CPLD and AD9912 driver [wip] 2018-01-02 19:59:24 +01:00
whitequark a2bc12da68 Only print gateware/software mismatch warning once per process. 2017-12-26 21:13:46 +00:00
Robert Jördens 7f15f50878 coredevice/ad9912: add [untested, wip] 2017-11-24 18:47:46 +01:00
Sebastien Bourdeauducq 280392708d sawg: fix typo 2017-11-22 20:06:02 +08:00
Sebastien Bourdeauducq 4deeccbead coredevice: add shift register driver 2017-10-31 23:13:06 +08:00
Sebastien Bourdeauducq 42aca0d64a ad5360: revert incorrect part of a9798ae2 
We don't have enumerate() yet.
 2017-10-23 18:50:50 +08:00
Sebastien Bourdeauducq a9798ae2b1 gateware/spi: style 2017-10-23 18:46:18 +08:00
Sebastien Bourdeauducq 5437f0e3e3 rtio: make sequence errors consistently asychronous 2017-09-29 14:40:06 +08:00
Thao e94d2d3779 set range for divider values 2017-09-21 14:26:16 +08:00
Sebastien Bourdeauducq 189020344c spi: fix typo in doc 2017-07-20 22:18:21 +08:00
Sebastien Bourdeauducq d0b21a8e85 manual: add short description of drivers, with replace support information. Closes #777 2017-07-20 12:01:29 +08:00
Robert Jördens 471605ec1e pdq: move to https://github.com/m-labs/pdq 2017-07-19 17:35:28 +02:00
whitequark dd87508a7f Implement forwarding of logs from core device to master. 
Fixes #691.
 2017-07-18 05:31:59 +00:00
Robert Jördens d96c2abe44 pdq: read/write_reg -> get/set_reg 
see also m-labs/pdq#14
 2017-07-17 21:45:46 +02:00
Sebastien Bourdeauducq 9045b4cc19 drtio: initial firmware support for multi-link 2017-07-18 00:40:21 +08:00
Robert Jördens f0841f5489 spline: be really verbose 
closes #773
 2017-07-07 11:43:58 +02:00
Robert Jördens 3bc0e32dc0 sawg: advance the timeline on Config access 
c.f. #773 #765
 2017-07-07 11:33:58 +02:00
Robert Jördens 3222f5036f sawg: describe latency matching in detail 2017-07-06 10:06:21 +02:00
Robert Jördens 91ca9fbcad sawg: also give offset some headroom 
closes #771
 2017-07-04 16:50:06 +02:00
whitequark 31b52ff1b3 coredevice: do not desync kernel TCP stream on RPCReturnValueError. 
And propagate the error upwards instead of trying to squeeze it
through the core device in futility.
 2017-06-25 04:47:32 +00:00
whitequark fdb24ef139 coredevice: truncate overlong exception messages. 
If we have a really long one (megabytes) then this may exhaust
the heap of the core device and crash it.
 2017-06-25 04:39:08 +00:00
Robert Jördens 53be34a25f sawg: clear phase accu in reset 2017-06-22 13:27:49 +02:00
Robert Jördens 4b3aad2563 sawg: clean up Config 
* unify I and Q data limiters. there is no conceivable way why they
would be different.
* reorder clr bits to be like consistent
* move the sat add limiter to before the hbf again
 2017-06-22 10:26:29 +02:00
Sebastien Bourdeauducq 8c56a95fa2 spi: add default busno 2017-06-20 00:49:38 +08:00
Sebastien Bourdeauducq 470bce6214 coredevice: add AD9154 SPI access driver 2017-06-20 00:48:50 +08:00
Sebastien Bourdeauducq a6d06824e7 fix indentation 2017-06-20 00:12:11 +08:00
Sebastien Bourdeauducq 8f2d85fc5b add back ad9154_reg.py 2017-06-19 23:45:32 +08:00
Sebastien Bourdeauducq c86029bca2 i2c: expose restart as syscall, add structure for I2C-over-DRTIO 2017-06-19 23:44:51 +08:00
Sebastien Bourdeauducq 268b7d8aaf typo 2017-06-19 15:42:10 +08:00
Sebastien Bourdeauducq 5d63489080 i2c,spi: add busno error detection 2017-06-19 14:27:30 +08:00
Sebastien Bourdeauducq 8399f8893d add kernel access to non-realtime SPI buses (#740) 2017-06-18 12:45:07 +08:00
Robert Jördens b5772f478a sawg: add channel reset (closes #751) 2017-06-16 19:31:57 +02:00
Robert Jördens fecc42fd0c sawg/phaser: expand documentation (closes #750) 2017-06-14 11:49:52 +02:00
Robert Jördens 858c1be381 sawg: expand documentation 2017-06-13 18:51:48 +02:00
Robert Jördens 566ff73dff pdq: unify spi-PDQ and usb-PDQ protocols 2017-06-10 15:03:25 +02:00
Robert Jördens d8aee931ba sawg: extend phase mode docs 2017-06-09 12:26:49 +02:00
whitequark 284382b1f5 compiler: add support for bytearray values in RPC (#714). 2017-06-09 07:15:25 +00:00
whitequark 66a683f583 compiler: add support for bytes values in RPC (#714). 2017-06-09 07:10:48 +00:00
Robert Jördens 91ad2bc600 sawg: add note about disabled q-exchange 2017-06-07 09:13:01 +02:00
Robert Jördens 94273e9455 sawg: add non-mu methods for limiter 2017-06-07 09:12:36 +02:00
Sebastien Bourdeauducq ebb4660207 coredevice: compare software and gateware versions strictly 2017-06-07 02:11:54 +08:00
Sebastien Bourdeauducq ab493a860d coredevice: fix socket resource leak 2017-06-05 15:45:40 +08:00
Sebastien Bourdeauducq bea7a47349 coredevice: compare gateware and software versions on release numbers only. Closes #738 2017-06-05 13:52:24 +08:00
Robert Jördens 2895448477 sawg: link Spline in docs 2017-05-23 10:33:04 +02:00
Robert Jördens 52625d57f0 sawg: explain DUC 2017-05-23 10:28:23 +02:00
Robert Jördens 06721c19c4 sawg: work around bool->int 2017-05-22 18:50:58 +02:00
Robert Jördens 1562f79101 sawg: expose config channel 2017-05-22 18:27:42 +02:00
Sebastien Bourdeauducq 5ccca74a3f fold comm device into core device 2017-05-22 15:45:45 +08:00
Robert Jördens 170d2886fd Merge branch 'pdq' 
* pdq:
  pdq: documentation
  pdq2 -> pdq
  pdq2: use 16 bit data, buffered read_mem()
  spi: style
  pdq2: mem_read
  pdq2: align subsequent writes to end
  sma_spi: undo cri_con
  pdq2: memory write, kernel_invariants
  sma_spi: cri/cd changes
  sma_spi: LVCMOS25
  coredevice.spi: kernel invariants and style
  sma_spi: free up user_sma pins
  sma_spi: add demo target with SPI on four SMA
  pdq2: memory write
  pdq2: crc/frame register accessors
  doc: pdq2 spi backend
  pdq2: config writes
 2017-05-12 11:46:45 +02:00
Robert Jördens fed24309b8 pdq: documentation 2017-05-02 18:55:02 +02:00
Robert Jördens 1a1edb13bf pdq2 -> pdq 2017-05-02 18:05:41 +02:00
whitequark 41c4de4556 DMA: add API for a much faster replay using handles. 2017-04-18 08:20:12 +00:00
whitequark c6e8d5c901 runtime: allow setting UART log level explicitly. 
This is way more convenient than commenting out parts
of session.rs when debugging.
 2017-04-15 08:27:18 +00:00
whitequark 0531dc45c3 DMA: erase trace before re-recording it. 
Or we could needlessly OOM replacing a large trace.
 2017-04-15 07:48:02 +00:00
Robert Jördens 534e681d0b pdq2: use 16 bit data, buffered read_mem() 2017-04-13 20:49:46 +02:00
Robert Jördens 90cf11994e spi: style 2017-04-13 13:38:29 +02:00
Robert Jördens 8446cccb4e pdq2: mem_read 2017-04-13 13:38:13 +02:00
whitequark 296dc3b0c4 artiq_coreboot: allow hot-rebooting the device. 2017-04-11 03:24:24 +00:00
whitequark 1bd4d13391 artiq_compile: make print() write to core log, not an invalid op. 
Fixes #710.
 2017-04-11 03:16:34 +00:00
Robert Jördens 20652ce128 pdq2: align subsequent writes to end 2017-04-09 13:50:19 +02:00
Robert Jördens 78dd4b8614 pdq2: memory write, kernel_invariants 2017-04-08 17:16:19 +02:00
Robert Jördens 0838981bed coredevice.spi: kernel invariants and style 2017-04-08 17:16:19 +02:00
Robert Jördens f13f6eb7be pdq2: memory write 2017-04-08 17:16:19 +02:00
Robert Jördens b9c61ae2da pdq2: crc/frame register accessors 2017-04-08 17:16:19 +02:00
Robert Jördens aebbaa339e pdq2: config writes 2017-04-08 17:16:18 +02:00
whitequark 14ae1cc100 runtime: advance now on DMA replay. 
Fixes #700.
 2017-04-05 18:34:36 +00:00
whitequark 948ed6fb0a Extract core device management interface from session interface (#691). 2017-03-29 03:36:21 +00:00
whitequark b643847da5 Fix a misleading message for non-clean kernel termination. 2017-03-28 14:22:20 +00:00
Sebastien Bourdeauducq b9ff5afc85 dma: improve/fix documentation 2017-03-27 17:21:39 +08:00
Sebastien Bourdeauducq b74d6fb9ba make collision and busy asynchronous errors, and simplify CPU/gateware handshake for output errors and reads 2017-03-27 16:32:23 +08:00
whitequark 795a3e24d8 artiq_coreboot: block until hotswap image is actually received. 2017-03-07 11:36:28 +00:00
whitequark b0cdef3211 firmware: implement hotswap through artiq_coreboot tool. 2017-03-06 16:01:28 +00:00
whitequark e8c093deb3 Allow changing runtime log level without recompilation. 
This shouldn't affect performance much, as the log crate guards
every log statement with a branch, adding just two instructions.
 2017-03-03 06:06:26 +00:00
whitequark a4ece19614 Implement DMA playback. 2017-02-28 21:28:40 +00:00
Sebastien Bourdeauducq 7d6ebabc1b reorganize core device communication code 2017-02-27 18:37:30 +08:00
Sebastien Bourdeauducq b8bfcd2d7e moninj: share probe/override numbers and use Enum 2017-02-27 11:54:16 +08:00
Sebastien Bourdeauducq 26654e6a3a moninj: Python-side fixes 2017-02-27 11:45:04 +08:00
Sebastien Bourdeauducq dff23293c7 Merge branch 'master' of github.com:m-labs/artiq 2017-02-27 01:05:40 +08:00
Sebastien Bourdeauducq 990b8152f6 coredevice: add moninj protocol driver 2017-02-27 00:59:17 +08:00
whitequark 5d3b00cf12 Implement recording of DMA traces on the core device. 2017-02-26 02:50:20 +00:00
Sebastien Bourdeauducq e82ce3ea28 coredevice: ignore .dirty in version checks correctly 2017-02-25 20:05:05 +08:00
Robert Jördens e323e37829 pcu: refactor into a device 2017-02-19 19:34:55 +01:00
Robert Jördens b05d1bb7e3 coreanalyzer: fix corner case crash 2017-02-19 19:28:13 +01:00
Robert Jördens 1573ff5fc1 coreanalyzer: add WB stb signal 2017-02-18 14:53:10 +01:00
Robert Jördens 039ced6637 coreanalyzer: use VCD scopes for DDS/SPI 2017-02-18 14:25:01 +01:00
Robert Jördens 7519408857 coreanalyzer: add SPIMaster support 2017-02-18 14:13:20 +01:00
Robert Jördens 41e8acf3ad coreanalyzer handle input events without timestamp 
Offset the timeline by the first non-zero timestamp.
 2017-02-18 14:12:02 +01:00
Robert Jördens bc3fc26e34 coredevice: expose PCU 2017-02-18 14:09:12 +01:00
whitequark 6fd149f048 Show a message when interrupting a running kernel (except idle kernel). 
Fixes #625.
 2017-01-31 22:53:38 +00:00
whitequark 74b910e97d In case of a load error, pass the reason to host interpreter. 
Fixes #654.
 2017-01-27 12:49:48 +00:00
Sebastien Bourdeauducq 7c699e2f80 drtio: add FIFO space request count debug API 2017-01-11 13:48:14 -06:00
Sebastien Bourdeauducq fdfaa377db drtio: add debug syscalls 2017-01-08 15:06:14 -06:00
Sebastien Bourdeauducq 1b49affd18 typo 2017-01-08 13:04:10 -06:00
Sebastien Bourdeauducq 082fdaf450 move i2c to libboard, do bit-banging on comms CPU 2017-01-04 21:04:38 +01:00
Sebastien Bourdeauducq 7ff77bceac move AD9616 and AD9154 initialization to firmware 2017-01-03 16:11:38 +01:00
Robert Jördens 5efd0fcea5 sawg: documentation 2016-12-06 19:25:40 +01:00
Robert Jördens 695eb705b3 sawg: extract spline 2016-12-04 16:52:08 +01:00
Robert Jördens 39becd0b4e sawg: document 2016-12-04 16:50:49 +01:00
Robert Jördens 87bd2072e8 sawg: round to int64 2016-12-02 18:07:01 +01:00
Robert Jördens 6e9bc7c05d sawg: merge set/set64 2016-12-01 16:45:54 +01:00
Robert Jördens ed6d1e73cc sawg: cleanup 2016-11-30 10:52:35 +01:00
Robert Jördens fb58f31c9d Revert "sawg: test w/o discrete_compensate" 
This reverts commit b736dd0df7.
 2016-11-29 20:56:04 +01:00
Robert Jördens b736dd0df7 sawg: test w/o discrete_compensate 2016-11-29 20:52:02 +01:00
Robert Jördens d8b5eac856 sawg: style 2016-11-29 20:51:40 +01:00
Robert Jördens d9dd79fb1a sawg: int32 artiq python 2016-11-29 17:36:03 +01:00
Robert Jördens 4a03e3fce0 sawg: rtio_output_wide 2016-11-29 17:23:06 +01:00
Robert Jördens f6fc7f9216 rtio: rtio_output_{list->wide} 2016-11-29 17:22:55 +01:00
Robert Jördens 313aa32779 sawg: artiq-python list scoping 2016-11-29 17:20:02 +01:00
Robert Jördens c53040e1e4 sawg: work around #632 2016-11-29 17:01:39 +01:00
Robert Jördens a3d9e21b8c sawg: artiq-python changes 2016-11-29 16:58:26 +01:00
Robert Jördens 23fd225947 sawg: spline knot packing/conversion, unittest 2016-11-29 14:49:07 +01:00
Robert Jördens 6799bb097a sawg: adapt to int32/int64 change 2016-11-22 11:57:34 +01:00
Robert Jördens 4cd2b36995 Merge branch 'phaser' into phaser2 
* phaser:
  runtime: replace a (deliberate) memory leak with an interner.
  compiler: disable remarks.
  runtime: rewrite i2c support code in Rust.
  runtime: rewrite rtio support code in Rust.
 2016-11-21 23:11:52 +01:00
Robert Jördens feb95bf3cf Merge branch 'master' into phaser 
* master:
  runtime: replace a (deliberate) memory leak with an interner.
  compiler: disable remarks.
  runtime: rewrite i2c support code in Rust.
  runtime: rewrite rtio support code in Rust.
 2016-11-21 22:26:52 +01:00
whitequark a825584ac0 runtime: rewrite rtio support code in Rust. 2016-11-21 17:13:09 +00:00
Robert Jördens 4160490e0a Merge branch 'phaser' into phaser2 
* phaser: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
 2016-11-21 17:29:46 +01:00
Robert Jördens f7e8961ab0 Merge branch 'master' into phaser 
* master: (23 commits)
  RELEASE_NOTES: update
  pipistrello: add some inputs
  Remove last vestiges of nist_qc1.
  Fully drop AD9858 and kc705-nist_qc1 support (closes #576).
  coredevice.dds: reimplement fully in ARTIQ Python.
  compiler: unbreak casts to int32/int64.
  analyses.constness: fix false positive on x[...].
  inferencer: significantly improve the op-assignment diagnostic.
  Fix tests.
  Move mu_to_seconds, seconds_to_mu to Core.
  artiq_devtool: don't crash on invalid utf-8.
  artiq_devtool: detect a race condition during connect.
  llvm_ir_generator: handle no-op coercions.
  conda: use development version of migen/misoc
  Revert accidentally committed code.
  Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623"
  analyses.invariant_detection: implement (#622).
  Fix whitespace.
  coredevice.dds: work around the round(numpy.float64()) snafu.
  coredevice.dds: update from obsolete int(width=) syntax (fixes #621).
  ...
 2016-11-21 17:29:39 +01:00
whitequark f4b7666768 coredevice.dds: reimplement fully in ARTIQ Python. 
This commit also drops AD9858 support from software.
 2016-11-21 15:13:26 +00:00
Robert Jördens c73b1af7ab coredevice/sawg: missing comma 2016-11-21 13:16:44 +01:00
Robert Jördens b226dbd257 sawg: unittest data format 2016-11-21 12:35:57 +01:00
whitequark 009d396740 Move mu_to_seconds, seconds_to_mu to Core. 2016-11-21 05:37:30 +00:00
Robert Jördens 9221a275cb sawg: kernel support (wip) 2016-11-20 16:39:53 +01:00
whitequark abf2b32b20 coredevice.dds: work around the round(numpy.float64()) snafu. 2016-11-20 09:49:58 +00:00
whitequark d7f4397924 coredevice.dds: update from obsolete int(width=) syntax (fixes #621). 2016-11-20 09:49:39 +00:00
Robert Jördens 641f07119f runtime: support rtio data wider than 64 bit 2016-11-18 17:08:33 +01:00
Robert Jördens aedb6747f2 Merge branch 'master' into phaser 
* master: (47 commits)
  runtime: disable the Nagle algorithm entirely.
  runtime: buffer RPC send packets.
  runtime: don't print debug messages to the UART.
  runtime: print microsecond timestamps in debug messages.
  artiq_devtool: abort if build failed.
  conda: bump llvmlite-artiq dep.
  conda: bump llvmlite-artiq dep.
  llvm_ir_generator: use !{→unconditionally.}invariant.load metadata.
  artiq_devtool: more robust port forwarding.
  setup: remove paramiko dependency (optional and developer-only)
  artiq_devtool: implement.
  artiq_compile: actually disable attribute writeback.
  conda: use pythonparser 1.0.
  conda: tighten pythonparser dependency (fixes #600).
  doc: clarify kernel_invariant doc (fixes #609).
  compiler: Emit all-kernel_invariant objects as LLVM constants
  conda: update for LLVM 3.9.
  add has_dds, use config flags
  Revert "Revert "Revert "Revert "Update for LLVM 3.9.""""
  Revert "Revert "Revert "Update for LLVM 3.9."""
  ...
 2016-11-13 16:54:28 +01:00
whitequark 0e76cbc414 artiq_compile: actually disable attribute writeback. 
I wrote both halves of this condition but forgot to hook
them together.

Fixes #586.
 2016-11-10 01:04:36 +00:00
whitequark 6fcd57a41a runtime: fix remaining async RPC bugs. 2016-11-01 10:33:57 +00:00