DHCP is enabled by setting the `ip` config entry to "use_dhcp". Reusing this
config field rather than creating a new one means that there is no ambiguity
over which config field takes precedence.
Adds a thread to configure the interface based on DHCP events
Adds a `Dhcpv4Socket` as a wrapper around smoltcp's version
Formalises the storage of the IP addresses so that we can update one in
another module.
There's also a workaround for the first DHCP discover packet frequently
going missing.
Signed-off-by: Michael Birtwell <michael.birtwell@oxionics.com>
* Revert "Merge pull request #1544 from airwoodix/dataset-compression"
This reverts commit 311a818a49, reversing
changes made to 7ffe4dc2e3.
* fix accidental revert of f42bea06a8
* coredevice: Change Urukul default single-tone profile to 7
This allows using the internal profile control in RAM modulation mode (which always starts to play back at profile 0) without competing for the content of the profile 0 register used in single tone mode.
Signed-off-by: Peter Drmota <peter.drmota@physics.ox.ac.uk>
* ad9910/set_mu: comment on caveats when setting register
* ad9910: avoid unnecessary write/param
Credit: Solution proposed by @pmldrmota in https://github.com/m-labs/artiq/pull/1584#issuecomment-987774353
* revert 1064fdff (`set_mu()` comments)
158a7be7 had addressed this issue.
Co-authored-by: occheung <dc@m-labs.hk>
* coredevice.ad9910: Add set_cfr2 function and extend arguments of set_cfr1 and set_sync
* SUServo: Wrap CPLD and DDS devices in a list
* SUServo: Refactor [nfc]
Co-authored-by: drmota <peter.drmota@physics.ox.ac.uk>
Co-authored-by: David Nadlinger <code@klickverbot.at>
previously ttl_counter_0 and ttl_0 could be on completely different physical ttl output channels
with this change, ttl_0_counter (note the changed key format) is always on the same channel as ttl_0
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
This breaks the internal dataset representation used by applets
and when saving to disk (``dataset_db.pyon``).
See ``test/test_dataset_db.py`` and ``test/test_datasets.py``
for examples.
Signed-off-by: Etienne Wodey <wodey@iqo.uni-hannover.de>
This reverts commits f8d1506922
and cf19c9512d.
While the commit just fixes a clear typo in the implementation,
it turns out the original algorithm isn't flexible enough to
capture functions that transitively return references to
long-lived data. For instance, while cache_get() is special-cased
in the compiler to be recognised as returning a value of Global()
lifetime, a function just forwarding to it (as seen in the
embedding tests) isn't anymore.
A separate issue is also that this makes implementing functions
that take lists and return references to global data in user code
impossible, which central parts of the Oxford codebase rely on.
Just reverting for now to unblock master; a fix is easily designed,
but needs testing.
I contemplated putting this in the "Breaking changes" section,
as it might break user code that has avoided being hit by
memory corruption from the use-after free by chance (even
though it was always an accepts-illegal bug).
Before, the system would enter a boot loop when a panic occurred
while the kernel CPU was active (and panic_reset == 1), as
kernel::start() for the startup kernel would panic.
Previously, a significant risk of losing experimental results would
be associated with long-running experiments, as any stray exceptions
while run()ing the experiment – for instance, due to infrequent
network glitches or hardware reliability issue – would cause no
HDF5 file to be written. This was especially troublesome as long
experiments would suffer from a higher probability of unanticipated
failures, while at the same time being more costly to re-take in
terms of wall-clock time.
Unanticipated uncaught exceptions like that were enough of an issue
that several Oxford codebases had come up with their own half-baked
mitigation strategies, from swallowing all exceptions in run() by
convention, to always broadcasting all results to uniquely named
datasets such that the partial results could be recovered and written
to HDF5 by manually run recovery experiments.
This commit addresses the problem at its source, changing the worker
behaviour such that an HDF5 file is always written as soon as run()
starts.
* ad9910: fix asf range
The ASF is a 14-bit word. The highest possible value is 0x3fff, not
0x3ffe. `int(round(1.0 * 0x3fff)) == 0x3fff`.
I don't remember and understand why this was 0x3ffe since the beginning.
0x3fff was already used as a default in `set_mu()`
Signed-off-by: Robert Jördens <rj@quartiq.de>
* RELEASE_NOTES: ad9910 asf scale change
Co-authored-by: David Nadlinger <code@klickverbot.at>
* Input validation and masking of SI -> mu conversions (close#1446)
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* Update RELEASE_NOTES
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
Co-authored-by: Robert Jördens <rj@quartiq.de>
* ad53xx: voltage_to_mu() validation & documentation (closes#1443, #1444)
The voltage input (float) is checked for validity. If we need more
speed, we may want to check the DAC-code for over/underflow instead.
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx documentation: voltage_to_mu is only valid for 16-bit DACs
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* AD53xx: add voltage_to_mu method (closes#1341)
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx: improve voltage_to_mu performance
Interger comparison is faster than floating point math.
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* AD53xx: voltage_to_mu method now uses attribute values
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* Fixup RELEASE_NOTES.rst
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
* ad53xx: documentation improvements
voltage_to_mu return value
14-bit DAC support
Signed-off-by: Marius Weber <marius.weber@physics.ox.ac.uk>
Edges on pulses shorter than the RTIO period were missed because the
reference sample and the last sample of the serdes word are the same.
This change enables detection of edges on pulses as short as the
serdes UI (and shorter as long as the pulse still hits a serdes sample
aperture).
In any RTIO period, only the leading event corresponding to the first
edge with slope according to sensitivity is registerd. If the channel is
sensitive to both rising and falling edges and if the pulse is contained
within an RTIO period, or if it is sensitive only to one edge slope and
there are multiple pulses in an RTIO period, only the leading event is
seen. Thus this possibility of lost events is still there. Only the
conditions under which loss occurs are reduced.
In testing with the kasli-ptb6 variant, this also improves resource
usage (a couple hundred LUT) and timing (0.1 ns WNS).
Sebastien Bourdeauducq
Robert Jördens
SingularitySurfer
Spaqin
Michael Birtwell
Leon Riesebos
hartytp
Leon Riesebos
Peter Drmota
Steve Fan
Etienne Wodey
occheung
fanmingyu212
Etienne Wodey
Mikołaj Sowiński
pca006132
Etienne Wodey
Marius Weber
Astro
David Nadlinger
Charles Baynham
Chris Ballance
Drew