mirror of https://github.com/m-labs/artiq.git
novatech409b: cleanup
This commit is contained in:
Joe Britton
parent
5a9bdb2e33
commit
f850336537
|
|
@ -15,10 +15,26 @@ class UnexpectedResponse(Exception):
|
|||
|
||||
|
||||
class Novatech409B:
|
||||
"""Driver for Novatech 409B 4-channel DDS"""
|
||||
"""Driver for Novatech 409B 4-channel DDS.
|
||||
|
||||
# maximum frequency of Novatech 409B when using PLL and external reference
|
||||
max_freq_with_pll = 171.1276031
|
||||
All output channels are in range [0, 1, 2, 3].
|
||||
All frequencies are in Hz.
|
||||
All phases are in turns.
|
||||
All amplitudes are in volts.
|
||||
"""
|
||||
|
||||
error_codes = {
|
||||
"?0": "Unrecognized Command",
|
||||
"?1": "Bad Frequency",
|
||||
"?2": "Bad AM Command",
|
||||
"?3": "Input line too long",
|
||||
"?4": "Bad Phase",
|
||||
"?5": "Bad Time",
|
||||
"?6": "Bad Mode",
|
||||
"?7": "Bad Amp",
|
||||
"?8": "Bad Constant",
|
||||
"?f": "Bad Byte"
|
||||
}
|
||||
|
||||
def __init__(self, serial_dev):
|
||||
if serial_dev is None:
|
||||
|
|
@ -32,68 +48,67 @@ class Novatech409B:
|
|||
parity="N",
|
||||
stopbits=1,
|
||||
xonxoff=0,
|
||||
timeout=0.2)
|
||||
timeout=1.0)
|
||||
self.setup()
|
||||
|
||||
def close(self):
|
||||
"""Close the serial port"""
|
||||
"""Close the serial port."""
|
||||
if not self.simulation:
|
||||
self.port.close()
|
||||
|
||||
def _ser_send(self, cmd, get_response=True):
|
||||
"""send a string to the serial port
|
||||
"""Send a string to the serial port."""
|
||||
|
||||
Routine for sending serial commands to device. It sends strings
|
||||
and listens for a response terminated by a carriage return.
|
||||
# Low-level routine for sending serial commands to device. It sends
|
||||
# strings and listens for a response terminated by a carriage return.
|
||||
# example:
|
||||
# ser_send("F0 1.0") # sets the freq of channel 0 to 1.0 MHz
|
||||
|
||||
example:
|
||||
ser_send("F0 1.0") # sets the freq of channel 0 to 1.0 MHz
|
||||
|
||||
:param cmd: a character string to send to device
|
||||
:returns: None
|
||||
"""
|
||||
if self.simulation:
|
||||
print(cmd)
|
||||
else:
|
||||
self.port.flush()
|
||||
self.port.flushInput()
|
||||
self.port.write((cmd + "\r\n").encode())
|
||||
result = self.port.readline().rstrip().decode()
|
||||
if get_response:
|
||||
result = self.port.readline().rstrip().decode()
|
||||
if result != "OK":
|
||||
raise UnexpectedResponse(result)
|
||||
logger.debug("got response from device: %s", result)
|
||||
if result == "OK":
|
||||
pass
|
||||
elif result == "":
|
||||
raise UnexpectedResponse("Response from device timed out")
|
||||
else:
|
||||
try:
|
||||
errstr = self.error_codes[result]
|
||||
except KeyError:
|
||||
errstr = "Unrecognized reply: '{}'".format(result)
|
||||
s = "Error Code = {ec}, {ecs}".format(ec=result, ecs=errstr)
|
||||
raise UnexpectedResponse(s)
|
||||
else:
|
||||
pass
|
||||
|
||||
def reset(self):
|
||||
"""command hardware reset of 409B
|
||||
|
||||
returns: None
|
||||
"""
|
||||
"""Hardware reset of 409B."""
|
||||
self._ser_send("R", get_response=False)
|
||||
time.sleep(1)
|
||||
self.setup()
|
||||
|
||||
def setup(self):
|
||||
"""initial setup of 409B
|
||||
"""Initial setup of 409B."""
|
||||
|
||||
Setup the Novatech 409B with the following defaults.
|
||||
* command echo off ("E d")
|
||||
* external clock ("") 10 MHz sinusoid -1 to +7 dBm
|
||||
# Setup the Novatech 409B with the following defaults:
|
||||
# * command echo off ("E d")
|
||||
# * external clock ("") 10 MHz sinusoid -1 to +7 dBm
|
||||
|
||||
:returns: None
|
||||
"""
|
||||
# disable command echo
|
||||
self._ser_send("E d", get_response=False)
|
||||
self.set_phase_continuous(True)
|
||||
self.set_simultaneous_update(False)
|
||||
|
||||
def save_state_to_eeprom(self):
|
||||
"""save current state to EEPROM
|
||||
|
||||
Saves current state into EEPROM and sets valid flag.
|
||||
State used as default upon next power up or reset. """
|
||||
"""Save current state to EEPROM."""
|
||||
self._ser_send("S")
|
||||
|
||||
def set_phase_continuous(self, is_continuous):
|
||||
"""toggle phase continuous mode
|
||||
"""Toggle phase continuous mode.
|
||||
|
||||
Sends the "M n" command. This turns off the automatic
|
||||
clearing of the phase register. In this mode, the phase
|
||||
|
|
@ -109,7 +124,9 @@ class Novatech409B:
|
|||
self._ser_send("M a")
|
||||
|
||||
def set_simultaneous_update(self, simultaneous):
|
||||
"""Sends the "I m" command. In this mode an update
|
||||
"""Set simultaneous update mode.
|
||||
|
||||
Sends the "I m" command. In this mode an update
|
||||
pulse will not be sent to the DDS chip until
|
||||
an "I p" command is sent. This is useful when it is
|
||||
important to change all the outputs to new values
|
||||
|
|
@ -121,140 +138,75 @@ class Novatech409B:
|
|||
self._ser_send("I a")
|
||||
|
||||
def set_freq(self, ch_no, freq):
|
||||
"""set_freq(ch_no,freq):
|
||||
Set ch_no to frequency freq MHz"""
|
||||
if ch_no < 0 or ch_no > 3:
|
||||
raise ValueError("Incorrect channel number {}".format(ch_no))
|
||||
if freq < 0.0 or freq > self.max_freq_with_pll:
|
||||
raise ValueError("Incorrect frequency {}".format(freq))
|
||||
# do this immediately, disable SimultaneousUpdate mode
|
||||
"""Set frequency of one channel."""
|
||||
self.set_simultaneous_update(False)
|
||||
self._ser_send("F{:d} {:f}".format(ch_no, freq))
|
||||
# Novatech expects MHz
|
||||
self._ser_send("F{:d} {:f}".format(ch_no, freq/1e6))
|
||||
|
||||
def set_phase(self, ch_no, phase):
|
||||
"""set DDS phase
|
||||
|
||||
:param ch_no: 0 to 3
|
||||
:param phase: phase angle in cycles [0, 1]
|
||||
:returns: None
|
||||
"""
|
||||
if ch_no < 0 or ch_no > 3:
|
||||
raise ValueError("Incorrect channel number {}".format(ch_no))
|
||||
if phase < 0 or phase > 1:
|
||||
raise ValueError("Incorrect phase {}".format(phase))
|
||||
"""Set phase of one channel."""
|
||||
# do this immediately, disable SimultaneousUpdate mode
|
||||
self.set_simultaneous_update(False)
|
||||
# phase word is required by device
|
||||
# N is an integer from 0 to 16383. Phase is set to
|
||||
# N*360/16384 deg; in ARTIQ represent phase in cycles [0, 1]
|
||||
phase_word = round(phase*16384)
|
||||
if phase_word >= 16384:
|
||||
phase_word -= 16384
|
||||
phase_word = round(phase*16383)
|
||||
cmd = "P{:d} {:d}".format(ch_no, phase_word)
|
||||
self._ser_send(cmd)
|
||||
|
||||
def set_freq_all_phase_continuous(self, freq):
|
||||
"""set frequency of all channels simultaneously
|
||||
"""Set frequency of all channels simultaneously.
|
||||
|
||||
Set frequency of all channels simultaneously.
|
||||
1) all DDSs are set to phase continuous mode
|
||||
2) all DDSs are simultaneously set to new frequency
|
||||
Together 1 and 2 ensure phase continuous frequency switching.
|
||||
|
||||
:param freq: frequency in MHz
|
||||
:returns: None
|
||||
"""
|
||||
self.set_simultaneous_update(True)
|
||||
self.set_phase_continuous(True)
|
||||
for channel_num in range(4):
|
||||
self.set_freq(channel_num, freq)
|
||||
for i in range(4):
|
||||
self.set_freq(i, freq)
|
||||
# send command necessary to update all channels at the same time
|
||||
self._ser_send("I p")
|
||||
|
||||
def set_phase_all(self, phase):
|
||||
"""set phase of all DDS channels simultaneously
|
||||
"""Set phase of all channels simultaneously."""
|
||||
|
||||
Set phase of all DDS channels at the same time. For example,::
|
||||
set_phase_all([0, .25, 0.5, 0.75])
|
||||
|
||||
:param phase: vector of four phases (in cycles [0, 1])
|
||||
:returns: None
|
||||
"""
|
||||
self.set_simultaneous_update(True)
|
||||
# Note that this only works if the continuous
|
||||
# phase switching is turned off.
|
||||
self.set_phase_continuous(False)
|
||||
for ch_no in range(4):
|
||||
self.set_phase(ch_no, phase[ch_no])
|
||||
for i in range(4):
|
||||
self.set_phase(i, phase)
|
||||
# send command necessary to update all channels at the same time
|
||||
self._ser_send("I p")
|
||||
|
||||
def freq_sweep_all_phase_continuous(self, f0, f1, t):
|
||||
""" sweep phase of all DDSs, phase continuous
|
||||
def set_gain(self, ch_no, volts):
|
||||
"""Set amplitude of one channel."""
|
||||
|
||||
Sweep frequency in a phase continuous fashion.
|
||||
# due to error in Novatech it doesn't generate an error for
|
||||
# dac_value>1024, so need to trap.
|
||||
dac_value = int(math.floor(volts/0.51*1024))
|
||||
if dac_value < 0 or dac_value > 1023:
|
||||
s = "Amplitude out of range {v}".format(v=volts)
|
||||
raise ValueError(s)
|
||||
|
||||
:param f0: starting frequency (MHz)
|
||||
:param f1: ending frequency (MHz)
|
||||
:param t: sweep duration (seconds)
|
||||
:returns: None
|
||||
"""
|
||||
# TODO: consider using artiq.language.units
|
||||
if f0 == f1:
|
||||
return
|
||||
# get sign of sweep
|
||||
if f1 > f0:
|
||||
df_sign = 1
|
||||
else:
|
||||
df_sign = -1
|
||||
|
||||
self.set_phase_continuous(True)
|
||||
self.set_simultaneous_update(True)
|
||||
# calculate delay
|
||||
# note that a single call to self.set_freq_all_phase_continuous()
|
||||
# takes time t_for_one_freq_set; fix duration empirically
|
||||
t_for_one_freq_set = 0.264
|
||||
dt = t_for_one_freq_set
|
||||
n_steps = int(math.ceil(t/dt))
|
||||
df = abs(f0-f1)/n_steps
|
||||
for n in range(n_steps):
|
||||
fnow = f0+n*df_sign*df
|
||||
self.set_freq_all_phase_continuous(fnow)
|
||||
self.set_freq_all_phase_continuous(f1)
|
||||
|
||||
def output_scale(self, ch_no, frac):
|
||||
"""changes amplitude of a DDS
|
||||
|
||||
:param ch_no: DDS channel 0, 1, 2 or 3
|
||||
:param frac: 0 to 1 (full attenuation to no attenuation)
|
||||
:returns: None
|
||||
"""
|
||||
self.set_simultaneous_update(False)
|
||||
dac_ch_no = int(math.floor(frac*1024))
|
||||
s = "V{:d} {:d}".format(ch_no, dac_ch_no)
|
||||
s = "V{:d} {:d}".format(ch_no, dac_value)
|
||||
self._ser_send(s)
|
||||
|
||||
def output_scale_all(self, frac):
|
||||
"""changes amplitude of all DDSs
|
||||
|
||||
:param frac: 0 to 1 (full attenuation to no attenuation)
|
||||
"""
|
||||
for ch_no in range(4):
|
||||
self.output_scale(ch_no, frac)
|
||||
|
||||
def output_on_off(self, ch_no, on):
|
||||
"""turns on or off the DDS
|
||||
|
||||
:param ch_no: DDS channel 0, 1, 2 or 3
|
||||
"""
|
||||
if on:
|
||||
self.output_scale(ch_no, 1.0)
|
||||
def get_status(self):
|
||||
if self.simulation:
|
||||
return ["00989680 2000 01F5 0000 00000000 00000000 000301",
|
||||
"00989680 2000 01F5 0000 00000000 00000000 000301",
|
||||
"00989680 2000 01F5 0000 00000000 00000000 000301",
|
||||
"00989680 2000 01F5 0000 00000000 00000000 000301",
|
||||
"80 BC0000 0000 0102 21"]
|
||||
else:
|
||||
self.output_scale(ch_no, 0.0)
|
||||
|
||||
def output_on_off_all(self, on):
|
||||
"""turns on or off the all the DDSs"""
|
||||
if on:
|
||||
self.output_scale_all(1.0)
|
||||
else:
|
||||
self.output_scale_all(0.0)
|
||||
# status message is multi-line
|
||||
self.port.flushInput()
|
||||
self.port.write(("QUE" + "\r\n").encode())
|
||||
result = self.port.readlines()
|
||||
result = [r.rstrip().decode() for r in result]
|
||||
logger.debug("got device status: %s", result)
|
||||
return result
|
||||
|
|
|
|||
Loading…
Reference in New Issue