drtio: initialize si5324 in firmware

This commit is contained in:
Sebastien Bourdeauducq 2017-02-02 18:11:24 +08:00
parent 3488b4a857
commit f512ea42dc
2 changed files with 38 additions and 131 deletions

View File

@ -8,6 +8,28 @@ extern crate log;
extern crate logger_artiq; extern crate logger_artiq;
extern crate board; extern crate board;
#[cfg(rtio_frequency = "62.5")]
const SI5324_SETTINGS: board::si5324::FrequencySettings
= board::si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 8,
n2_hs : 10,
n2_ls : 20112,
n31 : 2514,
n32 : 4597
};
#[cfg(rtio_frequency = "150.0")]
const SI5324_SETTINGS: board::si5324::FrequencySettings
= board::si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 33732,
n31 : 9370,
n32 : 7139
};
fn startup() { fn startup() {
board::clock::init(); board::clock::init();
info!("ARTIQ satellite manager starting..."); info!("ARTIQ satellite manager starting...");
@ -16,6 +38,8 @@ fn startup() {
#[cfg(has_ad9516)] #[cfg(has_ad9516)]
board::ad9516::init().expect("cannot initialize ad9516"); board::ad9516::init().expect("cannot initialize ad9516");
board::i2c::init();
board::si5324::setup_hitless_clock_switching(&SI5324_SETTINGS).expect("cannot initialize si5324");
loop {} loop {}
} }

View File

@ -3,9 +3,8 @@ import os
from migen import * from migen import *
from migen.build.generic_platform import * from migen.build.generic_platform import *
from misoc.cores.i2c import *
from misoc.cores.sequencer import *
from misoc.cores import spi as spi_csr from misoc.cores import spi as spi_csr
from misoc.cores import gpio
from misoc.integration.builder import * from misoc.integration.builder import *
from misoc.integration.soc_core import mem_decoder from misoc.integration.soc_core import mem_decoder
from misoc.targets.kc705 import BaseSoC, soc_kc705_args, soc_kc705_argdict from misoc.targets.kc705 import BaseSoC, soc_kc705_args, soc_kc705_argdict
@ -19,119 +18,6 @@ from artiq import __version__ as artiq_version
from artiq import __artiq_dir__ as artiq_dir from artiq import __artiq_dir__ as artiq_dir
# NOTE: the logical parameters DO NOT MAP to physical values written
# into registers. They have to be mapped; see the datasheet.
# DSPLLsim reports the logical parameters in the design summary, not
# the physical register values.
pll_dividers_62_5 = {
"N1_HS" : 6, # 10
"NC1_LS" : 7, # 8
"N2_HS" : 6, # 10
"N2_LS" : 20111, # 20112
"N31" : 2513, # 2514
"N32" : 4596 # 4597
}
pll_dividers_150 = {
"N1_HS" : 5, # 9
"NC1_LS" : 3, # 4
"N2_HS" : 6, # 10
"N2_LS" : 33731, # 33732
"N31" : 9369, # 9370
"N32" : 7138 # 7139
}
# TODO: move I2C programming to softcore CPU
def get_i2c_program(d, sys_clk_freq):
i2c_sequence = [
# PCA9548: select channel 7
[(0x74 << 1), 1 << 7],
# Si5324: configure
[(0x68 << 1), 0, 0b01010000], # FREE_RUN=1
[(0x68 << 1), 1, 0b11100100], # CK_PRIOR2=1 CK_PRIOR1=0
[(0x68 << 1), 2, 0b0010 | (4 << 4)], # BWSEL=4
[(0x68 << 1), 3, 0b0101 | 0x10], # SQ_ICAL=1
[(0x68 << 1), 4, 0b10010010], # AUTOSEL_REG=b10
[(0x68 << 1), 6, 0x07], # SFOUT1_REG=b111
[(0x68 << 1), 25, (d["N1_HS"] << 5 ) & 0xff],
[(0x68 << 1), 31, (d["NC1_LS"] >> 16) & 0xff],
[(0x68 << 1), 32, (d["NC1_LS"] >> 8 ) & 0xff],
[(0x68 << 1), 33, (d["NC1_LS"]) & 0xff],
[(0x68 << 1), 40, (d["N2_HS"] << 5 ) & 0xff |
(d["N2_LS"] >> 16) & 0xff],
[(0x68 << 1), 41, (d["N2_LS"] >> 8 ) & 0xff],
[(0x68 << 1), 42, (d["N2_LS"]) & 0xff],
[(0x68 << 1), 43, (d["N31"] >> 16) & 0xff],
[(0x68 << 1), 44, (d["N31"] >> 8) & 0xff],
[(0x68 << 1), 45, (d["N31"]) & 0xff],
[(0x68 << 1), 46, (d["N32"] >> 16) & 0xff],
[(0x68 << 1), 47, (d["N32"] >> 8) & 0xff],
[(0x68 << 1), 48, (d["N32"]) & 0xff],
[(0x68 << 1), 137, 0x01], # FASTLOCK=1
[(0x68 << 1), 136, 0x40], # ICAL=1
]
program = [
InstWrite(I2C_CONFIG_ADDR, int(sys_clk_freq/1e3)),
]
for subseq in i2c_sequence:
program += [
InstWrite(I2C_XFER_ADDR, I2C_START),
InstWait(I2C_XFER_ADDR, I2C_IDLE),
]
for octet in subseq:
program += [
InstWrite(I2C_XFER_ADDR, I2C_WRITE | octet),
InstWait(I2C_XFER_ADDR, I2C_IDLE),
]
program += [
InstWrite(I2C_XFER_ADDR, I2C_STOP),
InstWait(I2C_XFER_ADDR, I2C_IDLE),
]
program += [
InstEnd(),
]
return program
class Si5324ResetClock(Module):
def __init__(self, platform, sys_clk_freq):
self.si5324_not_ready = Signal(reset=1)
# minimum reset pulse 1us
reset_done = Signal()
si5324_rst_n = platform.request("si5324").rst_n
reset_val = int(sys_clk_freq*1.1e-6)
reset_ctr = Signal(max=reset_val+1, reset=reset_val)
self.sync += \
If(reset_ctr != 0,
reset_ctr.eq(reset_ctr - 1)
).Else(
si5324_rst_n.eq(1),
reset_done.eq(1)
)
# 10ms after reset to microprocessor access ready
ready_val = int(sys_clk_freq*11e-3)
ready_ctr = Signal(max=ready_val+1, reset=ready_val)
self.sync += \
If(reset_done,
If(ready_ctr != 0,
ready_ctr.eq(ready_ctr - 1)
).Else(
self.si5324_not_ready.eq(0)
)
)
si5324_clkin = platform.request("si5324_clkin")
self.specials += \
Instance("OBUFDS",
i_I=ClockSignal("rtio_rx"),
o_O=si5324_clkin.p, o_OB=si5324_clkin.n
)
class Satellite(BaseSoC): class Satellite(BaseSoC):
mem_map = { mem_map = {
"drtio_aux": 0x50000000, "drtio_aux": 0x50000000,
@ -158,22 +44,6 @@ class Satellite(BaseSoC):
self.submodules += phy self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy)) rtio_channels.append(rtio.Channel.from_phy(phy))
if cfg == "simple_gbe":
pll_dividers = pll_dividers_62_5
elif cfg == "sawg_3g":
pll_dividers = pll_dividers_150
else:
raise ValueError
i2c_master = I2CMaster(platform.request("i2c"))
sequencer = ResetInserter()(
Sequencer(get_i2c_program(pll_dividers, self.clk_freq)))
si5324_reset_clock = Si5324ResetClock(platform, self.clk_freq)
self.submodules += i2c_master, sequencer, si5324_reset_clock
self.comb += [
sequencer.bus.connect(i2c_master.bus),
sequencer.reset.eq(si5324_reset_clock.si5324_not_ready)
]
self.comb += platform.request("sfp_tx_disable_n").eq(1) self.comb += platform.request("sfp_tx_disable_n").eq(1)
tx_pads = platform.request("sfp_tx") tx_pads = platform.request("sfp_tx")
rx_pads = platform.request("sfp_rx") rx_pads = platform.request("sfp_rx")
@ -215,6 +85,19 @@ class Satellite(BaseSoC):
self.drtio.aux_controller.bus) self.drtio.aux_controller.bus)
self.add_memory_region("drtio_aux", self.mem_map["drtio_aux"] | self.shadow_base, 0x800) self.add_memory_region("drtio_aux", self.mem_map["drtio_aux"] | self.shadow_base, 0x800)
self.config["RTIO_FREQUENCY"] = str(self.transceiver.rtio_clk_freq/1e6)
si5324_clkin = platform.request("si5324_clkin")
self.specials += \
Instance("OBUFDS",
i_I=ClockSignal("rtio_rx"),
o_O=si5324_clkin.p, o_OB=si5324_clkin.n
)
self.comb += platform.request("si5324").rst_n.eq(1)
i2c = self.platform.request("i2c")
self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
self.csr_devices.append("i2c")
self.config["I2C_BUS_COUNT"] = 1
rtio_clk_period = 1e9/self.transceiver.rtio_clk_freq rtio_clk_period = 1e9/self.transceiver.rtio_clk_freq
platform.add_period_constraint(self.transceiver.txoutclk, rtio_clk_period) platform.add_period_constraint(self.transceiver.txoutclk, rtio_clk_period)
platform.add_period_constraint(self.transceiver.rxoutclk, rtio_clk_period) platform.add_period_constraint(self.transceiver.rxoutclk, rtio_clk_period)