examples/sines_urukul_sayma: adapt for sayma v2, use 1 DAC only

artiq/examples/kasli_sawgmaster/device_db.py

@@ -25,50 +25,42 @@ device_db = {
     },
 }
 
-for i in range(8):
-    device_db["ttl" + str(i)] = {
-        "type": "local",
-        "module": "artiq.coredevice.ttl",
-        "class": "TTLInOut" if i < 4 else "TTLOut",
-        "arguments": {"channel": 1+i},
-    }
-
 device_db.update(
     spi_urukul0={
         "type": "local",
         "module": "artiq.coredevice.spi2",
         "class": "SPIMaster",
-        "arguments": {"channel": 9}
+        "arguments": {"channel": 0}
     },
     ttl_urukul0_io_update={
         "type": "local",
         "module": "artiq.coredevice.ttl",
         "class": "TTLOut",
-        "arguments": {"channel": 10}
+        "arguments": {"channel": 1}
     },
     ttl_urukul0_sw0={
         "type": "local",
         "module": "artiq.coredevice.ttl",
         "class": "TTLOut",
-        "arguments": {"channel": 11}
+        "arguments": {"channel": 2}
     },
     ttl_urukul0_sw1={
         "type": "local",
         "module": "artiq.coredevice.ttl",
         "class": "TTLOut",
-        "arguments": {"channel": 12}
+        "arguments": {"channel": 3}
     },
     ttl_urukul0_sw2={
         "type": "local",
         "module": "artiq.coredevice.ttl",
         "class": "TTLOut",
-        "arguments": {"channel": 13}
+        "arguments": {"channel": 4}
     },
     ttl_urukul0_sw3={
         "type": "local",
         "module": "artiq.coredevice.ttl",
         "class": "TTLOut",
-        "arguments": {"channel": 14}
+        "arguments": {"channel": 5}
     },
     urukul0_cpld={
         "type": "local",

artiq/examples/kasli_sawgmaster/repository/sines_urukul_sayma.py

@@ -8,9 +8,6 @@ class SinesUrukulSayma(EnvExperiment):
 
         # Urukul clock output syntonized to the RTIO clock.
         # Can be used as HMC830 reference on Sayma RTM.
-        # The clock output on Sayma AMC cannot be used, as it is derived from
-        # another Si5324 output than the GTH, and the two Si5324 output dividers
-        # are not synchronized with each other.
         # When using this reference, Sayma must be recalibrated every time Urukul
         # is rebooted, as Urukul is not synchronized to the Kasli.
         self.urukul_hmc_ref = self.get_device("urukul0_ch3")
@@ -19,8 +16,16 @@ class SinesUrukulSayma(EnvExperiment):
         # When testing sync, do not reboot Urukul, as it is not
         # synchronized to the Kasli.
         self.urukul_meas = [self.get_device("urukul0_ch" + str(i)) for i in range(3)]
-        self.sawgs = [self.get_device("sawg"+str(i)) for i in range(8)]
+        # The same waveform is output on all first 4 SAWG channels (first DAC).
+        self.sawgs = [self.get_device("sawg"+str(i)) for i in range(4)]
+        self.basemod = self.get_device("basemod_att0")
+        self.rfsws = [self.get_device("sawg_sw"+str(i)) for i in range(4)]
 
+
+    # DRTIO destinations:
+    # 0: local
+    # 1: Sayma AMC
+    # 2: Sayma RTM
     @kernel
     def drtio_is_up(self):
         for i in range(3):
@@ -61,6 +66,15 @@ class SinesUrukulSayma(EnvExperiment):
 
             self.core.reset()
 
+            delay(10*ms)
+            self.basemod.reset()
+            delay(10*ms)
+            self.basemod.set(3.0, 3.0, 3.0, 3.0)
+            delay(10*ms)
+            for rfsw in self.rfsws:
+                delay(1*ms)
+                rfsw.on()
+
             for sawg in self.sawgs:
                 delay(1*ms)
                 sawg.reset()