diff --git a/artiq/firmware/libboard_misoc/io_expander.rs b/artiq/firmware/libboard_misoc/io_expander.rs index 19baf5364..edf2ce666 100644 --- a/artiq/firmware/libboard_misoc/io_expander.rs +++ b/artiq/firmware/libboard_misoc/io_expander.rs @@ -1,5 +1,14 @@ -use i2c; use csr; +use i2c; + +// Only the bare minimum registers. Bits/IO connections equivalent between IC types. +struct Registers { + // PCA9539 equivalent register names in comments + iodira: u8, // Configuration Port 0 + iodirb: u8, // Configuration Port 1 + gpioa: u8, // Output Port 0 + gpiob: u8, // Output Port 1 +} pub struct IoExpander { busno: u8, @@ -9,15 +18,17 @@ pub struct IoExpander { iodir: [u8; 2], out_current: [u8; 2], out_target: [u8; 2], + registers: Registers, } impl IoExpander { #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))] - pub fn new(index: u8) -> Self { + pub fn new(index: u8) -> Result { const VIRTUAL_LED_MAPPING0: [(u8, u8, u8); 2] = [(0, 0, 6), (1, 1, 6)]; const VIRTUAL_LED_MAPPING1: [(u8, u8, u8); 2] = [(2, 0, 6), (3, 1, 6)]; + // Both expanders on SHARED I2C bus - match index { + let mut io_expander = match index { 0 => IoExpander { busno: 0, port: 11, @@ -26,6 +37,12 @@ impl IoExpander { iodir: [0xff; 2], out_current: [0; 2], out_target: [0; 2], + registers: Registers { + iodira: 0x00, + iodirb: 0x01, + gpioa: 0x12, + gpiob: 0x13, + }, }, 1 => IoExpander { busno: 0, @@ -35,9 +52,33 @@ impl IoExpander { iodir: [0xff; 2], out_current: [0; 2], out_target: [0; 2], + registers: Registers { + iodira: 0x00, + iodirb: 0x01, + gpioa: 0x12, + gpiob: 0x13, + }, }, - _ => panic!("incorrect I/O expander index"), + _ => return Err("incorrect I/O expander index"), + }; + if !io_expander.check_ack()? { + #[cfg(feature = "log")] + log::info!( + "MCP23017 io expander {} not found. Checking for PCA9539.", + index + ); + io_expander.address += 0xa8; // translate to PCA9539 addresses (see schematic) + io_expander.registers = Registers { + iodira: 0x06, + iodirb: 0x07, + gpioa: 0x02, + gpiob: 0x03, + }; + if !io_expander.check_ack()? { + return Err("Neither MCP23017 nor PCA9539 io expander found."); + }; } + Ok(io_expander) } #[cfg(soc_platform = "kasli")] @@ -57,9 +98,18 @@ impl IoExpander { Ok(()) } + fn check_ack(&self) -> Result { + // Check for ack from io expander + self.select()?; + i2c::start(self.busno)?; + let ack = i2c::write(self.busno, self.address)?; + i2c::stop(self.busno)?; + Ok(ack) + } + fn update_iodir(&self) -> Result<(), &'static str> { - self.write(0x00, self.iodir[0])?; - self.write(0x01, self.iodir[1])?; + self.write(self.registers.iodira, self.iodir[0])?; + self.write(self.registers.iodirb, self.iodir[1])?; Ok(()) } @@ -72,9 +122,9 @@ impl IoExpander { self.update_iodir()?; self.out_current[0] = 0x00; - self.write(0x12, 0x00)?; + self.write(self.registers.gpioa, 0x00)?; self.out_current[1] = 0x00; - self.write(0x13, 0x00)?; + self.write(self.registers.gpiob, 0x00)?; Ok(()) } @@ -94,20 +144,18 @@ impl IoExpander { pub fn service(&mut self) -> Result<(), &'static str> { for (led, port, bit) in self.virtual_led_mapping.iter() { - let level = unsafe { - (csr::virtual_leds::status_read() >> led) & 1 - }; + let level = unsafe { (csr::virtual_leds::status_read() >> led) & 1 }; self.set(*port, *bit, level != 0); } if self.out_target != self.out_current { self.select()?; if self.out_target[0] != self.out_current[0] { - self.write(0x12, self.out_target[0])?; + self.write(self.registers.gpioa, self.out_target[0])?; self.out_current[0] = self.out_target[0]; } if self.out_target[1] != self.out_current[1] { - self.write(0x13, self.out_target[1])?; + self.write(self.registers.gpiob, self.out_target[1])?; self.out_current[1] = self.out_target[1]; } } diff --git a/artiq/firmware/runtime/main.rs b/artiq/firmware/runtime/main.rs index 8715de959..0d76bd78a 100644 --- a/artiq/firmware/runtime/main.rs +++ b/artiq/firmware/runtime/main.rs @@ -104,8 +104,8 @@ fn startup() { let (mut io_expander0, mut io_expander1); #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))] { - io_expander0 = board_misoc::io_expander::IoExpander::new(0); - io_expander1 = board_misoc::io_expander::IoExpander::new(1); + io_expander0 = board_misoc::io_expander::IoExpander::new(0).unwrap(); + io_expander1 = board_misoc::io_expander::IoExpander::new(1).unwrap(); io_expander0.init().expect("I2C I/O expander #0 initialization failed"); io_expander1.init().expect("I2C I/O expander #1 initialization failed"); diff --git a/artiq/firmware/satman/main.rs b/artiq/firmware/satman/main.rs index 10beb6695..7dde13f3f 100644 --- a/artiq/firmware/satman/main.rs +++ b/artiq/firmware/satman/main.rs @@ -488,8 +488,8 @@ pub extern fn main() -> i32 { let (mut io_expander0, mut io_expander1); #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))] { - io_expander0 = board_misoc::io_expander::IoExpander::new(0); - io_expander1 = board_misoc::io_expander::IoExpander::new(1); + io_expander0 = board_misoc::io_expander::IoExpander::new(0).unwrap(); + io_expander1 = board_misoc::io_expander::IoExpander::new(1).unwrap(); io_expander0.init().expect("I2C I/O expander #0 initialization failed"); io_expander1.init().expect("I2C I/O expander #1 initialization failed"); #[cfg(has_wrpll)]