manual: minor polishing

This commit is contained in:
Sebastien Bourdeauducq 2019-02-20 19:01:55 +08:00
parent 84619adbab
commit 87a1ea6587
1 changed files with 6 additions and 8 deletions

View File

@ -44,10 +44,10 @@ Installing multiple packages and making them visible to the ARTIQ commands requi
# Contains the main ARTIQ packages, their dependencies, and board packages
# for systems used in CI.
# List: https://nixbld.m-labs.hk/channel/custom/artiq/main/channel
m-labs = import <m-labs> {};
m-labs = import <m-labs> { inherit pkgs; };
# Contains the board packages for the majority of systems.
# List: https://nixbld.m-labs.hk/channel/custom/artiq/sinara-systems/channel
sinara = import <sinara> {};
sinara = import <sinara> { inherit pkgs; };
in
pkgs.mkShell {
buildInputs = [
@ -153,7 +153,7 @@ Configuring OpenOCD
Some additional steps are necessary to ensure that OpenOCD can communicate with the FPGA board.
On Linux, first ensure that the current user belongs to the ``plugdev`` group (i.e. ``plugdev`` shown when you run ``$ groups``). If it does not, run ``sudo adduser $USER plugdev`` and re-login.
On Linux, first ensure that the current user belongs to the ``plugdev`` group (i.e. ``plugdev`` shown when you run ``$ groups``). If it does not, run ``$ sudo adduser $USER plugdev`` and re-login.
If you installed OpenOCD on Linux using Nix, use the ``which`` command to determine the path to OpenOCD, and then copy the udev rules: ::
@ -180,16 +180,14 @@ On Windows, a third-party tool, `Zadig <http://zadig.akeo.ie/>`_, is necessary.
You may need to repeat these steps every time you plug the FPGA board into a port where it has not been plugged into previously on the same system.
.. _flashing-core-device:
Writing the flash
^^^^^^^^^^^^^^^^^
Then, you write the flash:
Then, you can write the flash:
* For Kasli::
$ artiq_flash -V [your board variant]
$ artiq_flash -V [your system variant]
* For the KC705 board::
@ -213,7 +211,7 @@ and then reboot the device (with ``artiq_flash start`` or a power cycle).
In other cases, install OpenOCD as before, and flash the IP and MAC addresses directly: ::
$ artiq_mkfs flash_storage.img -s mac xx:xx:xx:xx:xx:xx -s ip xx.xx.xx.xx
$ artiq_flash -t [board] -V [adapter] -f flash_storage.img storage start
$ artiq_flash -t [board] -V [variant] -f flash_storage.img storage start
Check that you can ping the device. If ping fails, check that the Ethernet link LED is ON - on Kasli, it is the LED next to the SFP0 connector. As a next step, look at the messages emitted on the UART during boot. Use a program such as flterm or PuTTY to connect to the device's serial port at 115200bps 8-N-1 and reboot the device. On Kasli, the serial port is on FTDI channel 2 with v1.1 hardware (with channel 0 being JTAG) and on FTDI channel 1 with v1.0 hardware.