M-Labs
/
artiq
mirror of https://github.com/m-labs/artiq.git
2
0
Fork 2
Code Issues Projects Releases Wiki Activity

manual: minor polishing

This commit is contained in:
Sebastien Bourdeauducq 2019-02-20 19:01:55 +08:00
parent 84619adbab
commit 87a1ea6587
1 changed files with 6 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
doc/manual/installing.rst
View File

@ -44,10 +44,10 @@ Installing multiple packages and making them visible to the ARTIQ commands requi
# Contains the main ARTIQ packages, their dependencies, and board packages # Contains the main ARTIQ packages, their dependencies, and board packages
# for systems used in CI. # for systems used in CI.
# List: https://nixbld.m-labs.hk/channel/custom/artiq/main/channel # List: https://nixbld.m-labs.hk/channel/custom/artiq/main/channel
m-labs = import <m-labs> {}; m-labs = import <m-labs> { inherit pkgs; };
# Contains the board packages for the majority of systems. # Contains the board packages for the majority of systems.
# List: https://nixbld.m-labs.hk/channel/custom/artiq/sinara-systems/channel # List: https://nixbld.m-labs.hk/channel/custom/artiq/sinara-systems/channel
sinara = import <sinara> {}; sinara = import <sinara> { inherit pkgs; };
in in
pkgs.mkShell { pkgs.mkShell {
buildInputs = [ buildInputs = [
@ -153,7 +153,7 @@ Configuring OpenOCD
Some additional steps are necessary to ensure that OpenOCD can communicate with the FPGA board. Some additional steps are necessary to ensure that OpenOCD can communicate with the FPGA board.
On Linux, first ensure that the current user belongs to the ``plugdev`` group (i.e. ``plugdev`` shown when you run ``$ groups``). If it does not, run ``sudo adduser $USER plugdev`` and re-login. On Linux, first ensure that the current user belongs to the ``plugdev`` group (i.e. ``plugdev`` shown when you run ``$ groups``). If it does not, run ``$ sudo adduser $USER plugdev`` and re-login.
If you installed OpenOCD on Linux using Nix, use the ``which`` command to determine the path to OpenOCD, and then copy the udev rules: :: If you installed OpenOCD on Linux using Nix, use the ``which`` command to determine the path to OpenOCD, and then copy the udev rules: ::
@ -180,16 +180,14 @@ On Windows, a third-party tool, `Zadig <http://zadig.akeo.ie/>`_, is necessary.
You may need to repeat these steps every time you plug the FPGA board into a port where it has not been plugged into previously on the same system. You may need to repeat these steps every time you plug the FPGA board into a port where it has not been plugged into previously on the same system.
.. _flashing-core-device:
Writing the flash Writing the flash
^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
Then, you write the flash: Then, you can write the flash:
* For Kasli:: * For Kasli::
$ artiq_flash -V [your board variant] $ artiq_flash -V [your system variant]
* For the KC705 board:: * For the KC705 board::
@ -213,7 +211,7 @@ and then reboot the device (with ``artiq_flash start`` or a power cycle).
In other cases, install OpenOCD as before, and flash the IP and MAC addresses directly: :: In other cases, install OpenOCD as before, and flash the IP and MAC addresses directly: ::
$ artiq_mkfs flash_storage.img -s mac xx:xx:xx:xx:xx:xx -s ip xx.xx.xx.xx $ artiq_mkfs flash_storage.img -s mac xx:xx:xx:xx:xx:xx -s ip xx.xx.xx.xx
$ artiq_flash -t [board] -V [adapter] -f flash_storage.img storage start $ artiq_flash -t [board] -V [variant] -f flash_storage.img storage start
Check that you can ping the device. If ping fails, check that the Ethernet link LED is ON - on Kasli, it is the LED next to the SFP0 connector. As a next step, look at the messages emitted on the UART during boot. Use a program such as flterm or PuTTY to connect to the device's serial port at 115200bps 8-N-1 and reboot the device. On Kasli, the serial port is on FTDI channel 2 with v1.1 hardware (with channel 0 being JTAG) and on FTDI channel 1 with v1.0 hardware. Check that you can ping the device. If ping fails, check that the Ethernet link LED is ON - on Kasli, it is the LED next to the SFP0 connector. As a next step, look at the messages emitted on the UART during boot. Use a program such as flterm or PuTTY to connect to the device's serial port at 115200bps 8-N-1 and reboot the device. On Kasli, the serial port is on FTDI channel 2 with v1.1 hardware (with channel 0 being JTAG) and on FTDI channel 1 with v1.0 hardware.