diff --git a/artiq/gateware/targets/sayma_amc.py b/artiq/gateware/targets/sayma_amc.py index 4eec9e3f8..ca5ff169c 100755 --- a/artiq/gateware/targets/sayma_amc.py +++ b/artiq/gateware/targets/sayma_amc.py @@ -25,6 +25,144 @@ from artiq.gateware.drtio import * from artiq.build_soc import * +def workaround_us_lvds_tristate(platform): + # Those shoddy Kintex Ultrascale FPGAs take almost a microsecond to change the direction of a + # LVDS I/O buffer. The application has to cope with it and this cannot be handled at static + # timing analysis. Disable the latter for IOBUFDS. + # See: + # https://forums.xilinx.com/t5/Timing-Analysis/Delay-890-ns-in-OBUFTDS-in-Kintex-UltraScale/td-p/868364 + platform.add_platform_command( + "set_false_path -through [get_pins -filter {{REF_PIN_NAME == T}} -of [get_cells -filter {{REF_NAME == IOBUFDS}}]]") + + +class RTMUARTForward(Module): + def __init__(self, platform): + # forward RTM UART to second FTDI UART channel + serial_1 = platform.request("serial", 1) + serial_rtm = platform.request("serial_rtm") + self.comb += [ + serial_1.tx.eq(serial_rtm.rx), + serial_rtm.tx.eq(serial_1.rx) + ] + + +class SatelliteBase(BaseSoC): + mem_map = { + "drtioaux": 0x14000000, + } + mem_map.update(BaseSoC.mem_map) + + def __init__(self, rtio_clk_freq=125e6, identifier_suffix="", **kwargs): + BaseSoC.__init__(self, + cpu_type="or1k", + sdram_controller_type="minicon", + l2_size=128*1024, + **kwargs) + add_identifier(self, suffix=identifier_suffix) + + platform = self.platform + + # Use SFP0 to connect to master (Kasli) + self.comb += platform.request("sfp_tx_disable", 0).eq(0) + drtio_data_pads = [platform.request("sfp", 0)] + if self.hw_rev == "v2.0": + drtio_data_pads.append(platform.request("rtm_amc_link")) + self.submodules.drtio_transceiver = gth_ultrascale.GTH( + clock_pads=platform.request("cdr_clk_clean"), + data_pads=drtio_data_pads, + sys_clk_freq=self.clk_freq, + rtio_clk_freq=rtio_clk_freq) + self.csr_devices.append("drtio_transceiver") + + self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3) + + drtioaux_csr_group = [] + drtioaux_memory_group = [] + drtiorep_csr_group = [] + self.drtio_cri = [] + for i in range(len(self.drtio_transceiver.channels)): + coreaux_name = "drtioaux" + str(i) + memory_name = "drtioaux" + str(i) + "_mem" + drtioaux_csr_group.append(coreaux_name) + drtioaux_memory_group.append(memory_name) + + cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)}) + + if i == 0: + self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer()) + core = cdr(DRTIOSatellite( + self.rtio_tsc, self.drtio_transceiver.channels[i], + self.rx_synchronizer)) + self.submodules.drtiosat = core + self.csr_devices.append("drtiosat") + else: + corerep_name = "drtiorep" + str(i-1) + drtiorep_csr_group.append(corerep_name) + + core = cdr(DRTIORepeater( + self.rtio_tsc, self.drtio_transceiver.channels[i])) + setattr(self.submodules, corerep_name, core) + self.drtio_cri.append(core.cri) + self.csr_devices.append(corerep_name) + + coreaux = cdr(DRTIOAuxController(core.link_layer)) + setattr(self.submodules, coreaux_name, coreaux) + self.csr_devices.append(coreaux_name) + + memory_address = self.mem_map["drtioaux"] + 0x800*i + self.add_wb_slave(memory_address, 0x800, + coreaux.bus) + self.add_memory_region(memory_name, memory_address | self.shadow_base, 0x800) + self.config["HAS_DRTIO"] = None + self.config["HAS_DRTIO_ROUTING"] = None + self.add_csr_group("drtioaux", drtioaux_csr_group) + self.add_memory_group("drtioaux_mem", drtioaux_memory_group) + self.add_csr_group("drtiorep", drtiorep_csr_group) + + self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6) + if self.hw_rev == "v2.0": + self.comb += platform.request("filtered_clk_sel").eq(1) + self.submodules.siphaser = SiPhaser7Series( + si5324_clkin=platform.request("si5324_clkin"), + rx_synchronizer=self.rx_synchronizer, + ultrascale=True, + rtio_clk_freq=rtio_clk_freq) + platform.add_false_path_constraints( + self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output) + self.csr_devices.append("siphaser") + self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n) + self.csr_devices.append("si5324_rst_n") + i2c = self.platform.request("i2c") + self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda]) + self.csr_devices.append("i2c") + self.config["I2C_BUS_COUNT"] = 1 + self.config["HAS_SI5324"] = None + + rtio_clk_period = 1e9/rtio_clk_freq + gth = self.drtio_transceiver.gths[0] + platform.add_period_constraint(gth.txoutclk, rtio_clk_period/2) + platform.add_period_constraint(gth.rxoutclk, rtio_clk_period) + platform.add_false_path_constraints( + self.crg.cd_sys.clk, + gth.txoutclk, gth.rxoutclk) + + def add_rtio(self, rtio_channels): + # Only add MonInj core if there is anything to monitor + if any([len(c.probes) for c in rtio_channels]): + self.submodules.rtio_moninj = rtio.MonInj(rtio_channels) + self.csr_devices.append("rtio_moninj") + + self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels) + self.comb += self.drtiosat.async_errors.eq(self.local_io.async_errors) + self.submodules.cri_con = rtio.CRIInterconnectShared( + [self.drtiosat.cri], + [self.local_io.cri] + self.drtio_cri, + mode="sync", enable_routing=True) + self.csr_devices.append("cri_con") + self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con) + self.csr_devices.append("routing_table") + + class AD9154(Module, AutoCSR): def __init__(self, platform, sys_crg, jesd_crg, dac): self.submodules.jesd = jesd204_tools.UltrascaleTX( @@ -77,16 +215,6 @@ class AD9154NoSAWG(Module, AutoCSR): Cat(samples[3]).eq(Cat(samples[1])) ] -class RTMUARTForward(Module): - def __init__(self, platform): - # forward RTM UART to second FTDI UART channel - serial_1 = platform.request("serial", 1) - serial_rtm = platform.request("serial_rtm") - self.comb += [ - serial_1.tx.eq(serial_rtm.rx), - serial_rtm.tx.eq(serial_1.rx) - ] - class RTMSerWb: def __init__(self): @@ -115,14 +243,95 @@ class RTMSerWb: self.add_wb_slave(self.mem_map["serwb"], 8192, serwb_core.etherbone.wishbone.bus) -def workaround_us_lvds_tristate(platform): - # Those shoddy Kintex Ultrascale FPGAs take almost a microsecond to change the direction of a - # LVDS I/O buffer. The application has to cope with it and this cannot be handled at static - # timing analysis. Disable the latter for IOBUFDS. - # See: - # https://forums.xilinx.com/t5/Timing-Analysis/Delay-890-ns-in-OBUFTDS-in-Kintex-UltraScale/td-p/868364 - platform.add_platform_command( - "set_false_path -through [get_pins -filter {{REF_PIN_NAME == T}} -of [get_cells -filter {{REF_NAME == IOBUFDS}}]]") +class Satellite(SatelliteBase, RTMSerWb): + """ + DRTIO satellite with local DAC/SAWG channels. + """ + mem_map = { + "serwb": 0x13000000, + } + mem_map.update(SatelliteBase.mem_map) + + def __init__(self, with_sawg, **kwargs): + SatelliteBase.__init__(self, 150e6, + identifier_suffix=".without-sawg" if not with_sawg else "", + **kwargs) + RTMSerWb.__init__(self) + + platform = self.platform + + self.submodules += RTMUARTForward(platform) + + rtio_channels = [] + for i in range(4): + phy = ttl_simple.Output(platform.request("user_led", i)) + self.submodules += phy + rtio_channels.append(rtio.Channel.from_phy(phy)) + sma_io = platform.request("sma_io", 0) + self.comb += sma_io.direction.eq(1) + phy = ttl_serdes_ultrascale.Output(4, sma_io.level) + self.submodules += phy + rtio_channels.append(rtio.Channel.from_phy(phy)) + sma_io = platform.request("sma_io", 1) + self.comb += sma_io.direction.eq(0) + phy = ttl_serdes_ultrascale.InOut(4, sma_io.level) + self.submodules += phy + rtio_channels.append(rtio.Channel.from_phy(phy)) + + self.config["HMC830_REF"] = "150" + self.submodules.ad9154_crg = jesd204_tools.UltrascaleCRG( + platform, use_rtio_clock=True) + if with_sawg: + cls = AD9154 + else: + cls = AD9154NoSAWG + self.submodules.ad9154_0 = cls(platform, self.crg, self.ad9154_crg, 0) + self.submodules.ad9154_1 = cls(platform, self.crg, self.ad9154_crg, 1) + self.csr_devices.append("ad9154_crg") + self.csr_devices.append("ad9154_0") + self.csr_devices.append("ad9154_1") + self.config["HAS_AD9154"] = None + self.add_csr_group("ad9154", ["ad9154_0", "ad9154_1"]) + self.config["RTIO_FIRST_SAWG_CHANNEL"] = len(rtio_channels) + rtio_channels.extend(rtio.Channel.from_phy(phy) + for sawg in self.ad9154_0.sawgs + + self.ad9154_1.sawgs + for phy in sawg.phys) + + self.add_rtio(rtio_channels) + + self.submodules.sysref_sampler = jesd204_tools.SysrefSampler( + platform.request("dac_sysref"), self.rtio_tsc.coarse_ts) + self.csr_devices.append("sysref_sampler") + self.ad9154_0.jesd.core.register_jref(self.sysref_sampler.jref) + self.ad9154_1.jesd.core.register_jref(self.sysref_sampler.jref) + + +class SimpleSatellite(SatelliteBase): + def __init__(self, **kwargs): + SatelliteBase.__init__(self, **kwargs) + + platform = self.platform + + self.submodules += RTMUARTForward(platform) + + rtio_channels = [] + for i in range(4): + phy = ttl_simple.Output(platform.request("user_led", i)) + self.submodules += phy + rtio_channels.append(rtio.Channel.from_phy(phy)) + sma_io = platform.request("sma_io", 0) + self.comb += sma_io.direction.eq(1) + phy = ttl_serdes_ultrascale.Output(4, sma_io.level) + self.submodules += phy + rtio_channels.append(rtio.Channel.from_phy(phy)) + sma_io = platform.request("sma_io", 1) + self.comb += sma_io.direction.eq(0) + phy = ttl_serdes_ultrascale.InOut(4, sma_io.level) + self.submodules += phy + rtio_channels.append(rtio.Channel.from_phy(phy)) + + self.add_rtio(rtio_channels) class Master(MiniSoC, AMPSoC): @@ -279,170 +488,6 @@ class Master(MiniSoC, AMPSoC): self.csr_devices.append("routing_table") -class Satellite(BaseSoC, RTMSerWb): - """ - DRTIO satellite with local DAC/SAWG channels. - Use SFP0 to connect to master (Kasli/Sayma). - """ - mem_map = { - "serwb": 0x13000000, - "drtioaux": 0x14000000, - } - mem_map.update(BaseSoC.mem_map) - - def __init__(self, with_sawg, **kwargs): - BaseSoC.__init__(self, - cpu_type="or1k", - sdram_controller_type="minicon", - l2_size=128*1024, - **kwargs) - RTMSerWb.__init__(self) - add_identifier(self, suffix=".without-sawg" if not with_sawg else "") - self.config["HMC830_REF"] = "150" - - platform = self.platform - rtio_clk_freq = 150e6 - - self.submodules += RTMUARTForward(platform) - - rtio_channels = [] - for i in range(4): - phy = ttl_simple.Output(platform.request("user_led", i)) - self.submodules += phy - rtio_channels.append(rtio.Channel.from_phy(phy)) - sma_io = platform.request("sma_io", 0) - self.comb += sma_io.direction.eq(1) - phy = ttl_serdes_ultrascale.Output(4, sma_io.level) - self.submodules += phy - rtio_channels.append(rtio.Channel.from_phy(phy)) - sma_io = platform.request("sma_io", 1) - self.comb += sma_io.direction.eq(0) - phy = ttl_serdes_ultrascale.InOut(4, sma_io.level) - self.submodules += phy - rtio_channels.append(rtio.Channel.from_phy(phy)) - - self.submodules.ad9154_crg = jesd204_tools.UltrascaleCRG( - platform, use_rtio_clock=True) - if with_sawg: - cls = AD9154 - else: - cls = AD9154NoSAWG - self.submodules.ad9154_0 = cls(platform, self.crg, self.ad9154_crg, 0) - self.submodules.ad9154_1 = cls(platform, self.crg, self.ad9154_crg, 1) - self.csr_devices.append("ad9154_crg") - self.csr_devices.append("ad9154_0") - self.csr_devices.append("ad9154_1") - self.config["HAS_AD9154"] = None - self.add_csr_group("ad9154", ["ad9154_0", "ad9154_1"]) - self.config["RTIO_FIRST_SAWG_CHANNEL"] = len(rtio_channels) - rtio_channels.extend(rtio.Channel.from_phy(phy) - for sawg in self.ad9154_0.sawgs + - self.ad9154_1.sawgs - for phy in sawg.phys) - - self.submodules.rtio_moninj = rtio.MonInj(rtio_channels) - self.csr_devices.append("rtio_moninj") - - drtio_data_pads = [platform.request("sfp", 0)] - if self.hw_rev == "v2.0": - drtio_data_pads.append(platform.request("rtm_amc_link")) - self.comb += platform.request("sfp_tx_disable", 0).eq(0) - self.submodules.drtio_transceiver = gth_ultrascale.GTH( - clock_pads=platform.request("cdr_clk_clean"), - data_pads=drtio_data_pads, - sys_clk_freq=self.clk_freq, - rtio_clk_freq=rtio_clk_freq) - self.csr_devices.append("drtio_transceiver") - - self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3) - - drtioaux_csr_group = [] - drtioaux_memory_group = [] - drtiorep_csr_group = [] - drtio_cri = [] - for i in range(len(self.drtio_transceiver.channels)): - coreaux_name = "drtioaux" + str(i) - memory_name = "drtioaux" + str(i) + "_mem" - drtioaux_csr_group.append(coreaux_name) - drtioaux_memory_group.append(memory_name) - - cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)}) - - if i == 0: - self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer()) - core = cdr(DRTIOSatellite( - self.rtio_tsc, self.drtio_transceiver.channels[i], - self.rx_synchronizer)) - self.submodules.drtiosat = core - self.csr_devices.append("drtiosat") - else: - corerep_name = "drtiorep" + str(i-1) - drtiorep_csr_group.append(corerep_name) - - core = cdr(DRTIORepeater( - self.rtio_tsc, self.drtio_transceiver.channels[i])) - setattr(self.submodules, corerep_name, core) - drtio_cri.append(core.cri) - self.csr_devices.append(corerep_name) - - coreaux = cdr(DRTIOAuxController(core.link_layer)) - setattr(self.submodules, coreaux_name, coreaux) - self.csr_devices.append(coreaux_name) - - memory_address = self.mem_map["drtioaux"] + 0x800*i - self.add_wb_slave(memory_address, 0x800, - coreaux.bus) - self.add_memory_region(memory_name, memory_address | self.shadow_base, 0x800) - self.config["HAS_DRTIO"] = None - self.config["HAS_DRTIO_ROUTING"] = None - self.add_csr_group("drtioaux", drtioaux_csr_group) - self.add_memory_group("drtioaux_mem", drtioaux_memory_group) - self.add_csr_group("drtiorep", drtiorep_csr_group) - - self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels) - self.comb += self.drtiosat.async_errors.eq(self.local_io.async_errors) - self.submodules.cri_con = rtio.CRIInterconnectShared( - [self.drtiosat.cri], - [self.local_io.cri] + drtio_cri, - mode="sync", enable_routing=True) - self.csr_devices.append("cri_con") - self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con) - self.csr_devices.append("routing_table") - - self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6) - if self.hw_rev == "v2.0": - self.comb += platform.request("filtered_clk_sel").eq(1) - self.submodules.siphaser = SiPhaser7Series( - si5324_clkin=platform.request("si5324_clkin"), - rx_synchronizer=self.rx_synchronizer, - ultrascale=True, - rtio_clk_freq=rtio_clk_freq) - platform.add_false_path_constraints( - self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output) - self.csr_devices.append("siphaser") - self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n) - self.csr_devices.append("si5324_rst_n") - i2c = self.platform.request("i2c") - self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda]) - self.csr_devices.append("i2c") - self.config["I2C_BUS_COUNT"] = 1 - self.config["HAS_SI5324"] = None - - self.submodules.sysref_sampler = jesd204_tools.SysrefSampler( - platform.request("dac_sysref"), self.rtio_tsc.coarse_ts) - self.csr_devices.append("sysref_sampler") - self.ad9154_0.jesd.core.register_jref(self.sysref_sampler.jref) - self.ad9154_1.jesd.core.register_jref(self.sysref_sampler.jref) - - rtio_clk_period = 1e9/rtio_clk_freq - gth = self.drtio_transceiver.gths[0] - platform.add_period_constraint(gth.txoutclk, rtio_clk_period/2) - platform.add_period_constraint(gth.rxoutclk, rtio_clk_period) - platform.add_false_path_constraints( - self.crg.cd_sys.clk, - gth.txoutclk, gth.rxoutclk) - - def main(): parser = argparse.ArgumentParser( description="Sayma AMC gateware and firmware builder") @@ -450,7 +495,7 @@ def main(): soc_sayma_amc_args(parser) parser.set_defaults(output_dir="artiq_sayma") parser.add_argument("-V", "--variant", default="satellite", - help="variant: master/satellite " + help="variant: satellite/simplesatellite/master " "(default: %(default)s)") parser.add_argument("--rtm-csr-csv", default=os.path.join("artiq_sayma", "rtm_gateware", "rtm_csr.csv"), @@ -462,15 +507,8 @@ def main(): args = parser.parse_args() variant = args.variant.lower() - if variant == "master": - cls = lambda with_sawg, **kwargs: Master(**kwargs) - elif variant == "satellite": - cls = Satellite - else: - raise SystemExit("Invalid variant (-V/--variant)") - soc = cls(with_sawg=not args.without_sawg, **soc_sayma_amc_argdict(args)) - - if variant != "master": + if variant == "satellite": + soc = Satellite(with_sawg=not args.without_sawg, **soc_sayma_amc_argdict(args)) remote_csr_regions = remote_csr.get_remote_csr_regions( soc.mem_map["serwb"] | soc.shadow_base, args.rtm_csr_csv) @@ -481,6 +519,12 @@ def main(): soc.config["CONVERTER_SPI_HMC830_CS"] = 0 soc.config["CONVERTER_SPI_HMC7043_CS"] = 1 soc.config["CONVERTER_SPI_FIRST_AD9154_CS"] = 2 + elif variant == "simplesatellite": + soc = SimpleSatellite(**soc_sayma_amc_argdict(args)) + elif variant == "master": + soc = Master(**soc_sayma_amc_argdict(args)) + else: + raise SystemExit("Invalid variant (-V/--variant)") build_artiq_soc(soc, builder_argdict(args))